Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Equation of state of hot, dense magnesium derived with first-principles computer simulations

Using two first-principles computer simulation techniques, path integral Monte Carlo and density functional theory molecular dynamics, we derive the equation of state of magnesium in the regime of warm dense matter, with densities ranging from 0.43 to 86.11 g cm –3 and temperatures from 20,000 K to 5×10 8 K. These conditions are relevant for the interiors of giant planets and stars as well as for shock compression measurements and inertial confinement fusion experiments. Here, we study ionization mechanisms and the electronic structure of magnesium as a function of density and temperature. We show that the L shell electrons, 2s and 2p energy bands, merge at high densities. This results in gradual ionization of the L-shell with increasing density and temperature. In this regard, Mg differs from MgO, which is also reflected in the shape of its principal shock Hugoniot curve. For Mg, we predict a single broad pressure-temperature region, where the shock compression ratio is approximately 4.9. Mg thus differs from Si and Al plasmas that exhibit two well-separated compression maxima on the Hugoniot curve for L and K shell ionizations. Finally, we study multiple shocks and effects of preheat and precompression.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Probing the local electronic structure of isovalent Bi atoms in InP

Cross-sectional scanning tunneling microscopy (X-STM) is used to experimentally study the influence of isovalent Bi atoms on the electronic structure of InP. In this work, we map the spatial pattern of the Bi impurity state, which originates from Bi atoms down to the sixth layer below the surface, in topographic, filled-state X-STM images on the natural {110} cleavage planes. The Bi impurity state has a highly anisotropic bowtielike structure and extends over several lattice sites. These Bi-induced charge redistributions extend along the $\langle$110$\rangle$ directions, which define the bowtielike structures we observe. Local tight-binding calculations reproduce the experimentally observed spatial structure of the Bi impurity state. In addition, the influence of the Bi atoms on the electronic structure is investigated in scanning tunneling spectroscopy measurements. These measurements show that Bi induces a resonant state in the valence band, which shifts the band edge toward higher energies. Furthermore, we show that the energetic position of the Bi-induced resonance and its influence on the onset of the valence band edge depend crucially on the position of the Bi atoms relative to the cleavage plane.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Spin-orbit coupling driven orbital-selective doping effect in Sr 2 Ru 1 - x Ir x O 4

Orbital-selective phenomena in mutliorbital systems have received much attention due to their uniqueness as well as possible connections to other phenomena. As orbital-selectiveness is mostly related to the crystal structure, finding a new control parameter other than structure would be of significant importance. Here in this paper we report discovery of an orbital-selective doping effect in Sr 2 Ru 1 - x Ir x O 4 (SRIO). Our systematic electronic structure study of SRIO reveals an anomalous orbital-selective doping effect and concomitant Lifshitz transitions (LTs) in the γ band. With the help of a tight-binding calculation, we find that the orbital-selective doping effect is due to variation in the spin-orbit coupling (SOC) strength. Our findings not only elucidate the mechanism of LTs in the γ band in SRIO but may also open new avenues for novel SOC-controlled orbital-selective phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Probing configurational disorder in ZnGeN 2 using cluster-based Monte Carlo

ZnGeN 2 is sought as a semiconductor with comparable lattice constant to GaN and tunable band gap for integration in optoelectronic devices. Configurational disorder on the cation sublattice of ZnGeN 2 can strongly modify the electronic structure compared to the ordered material, and both ordered and disordered forms of ZnGeN 2 are candidates for light-emitting diodes and other emitters. The nonisovalent character of the disordered species (Zn 2+ and Ge 4+ ) subjects the cation ordering to strong short-range order effects. To model these effects, we use Monte Carlo (MC) simulations utilizing a cluster expansion to approximate formation enthalpy. Representative disordered configurations in 1024-atom supercells are relaxed in density functional theory calculations. From the MC structures, we extract a short-range order parameter (the N-cation coordination motif), and two long-range order parameters (Bragg-Williams and stretching parameters), and examine their correlations. We perform a thermodynamic integration to determine the mixing entropy and free energy. ZnGeN 2 exhibits a first-order phase transition with pronounced discontinuities in enthalpy and entropy, as well as in the structural order parameters. We discuss the relationship between the effective temperature used in the MC simulation and the growth temperatures in experiment in relation to the crossover from the nonequilibrium to the equilibrium growth regime. This work expands on current models of site disorder in ZnGeN 2 and provides atomic structure models with a systematic variation of the degree of cation disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Observation of gapless nodal-line states in NdSbTe

Lanthanide (Ln)-based systems in ZrSiS-type nodal-line semimetals have been subjects of research investigations as grounds for studying the interplay of topology with possible magnetic ordering and electronic correlations that may originate from the presence of Ln4f electrons. In this study, we carried out a thorough study of a LnSbTe system, NdSbTe, by using angle-resolved photoemission spectroscopy along with first-principles calculations and thermodynamic measurements. We experimentally detect the presence of multiple gapless nodal-line states, which is well supported by first-principles calculations. A dispersive and an almost nondispersive nodal line exist along the bulk X–R direction. Another nodal line is present well below the Fermi level across the Γ–M direction, which is formed by bands with high Fermi velocity that seem to be sensitive to light polarization. Finally, our study provides insight into the electronic structure of an alternative Ln⁢SbTe material system that will aid towards understanding the connection of Ln elements with topological electronic structures in these systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic Gradient Structures: Atomic Gradient Structure Alters Electronic Structure in 3D across the Bulk and Enhances Photoactivity

Understanding structure–function relationships enables the design of materials with tailored functionalities. The long-standing challenge is to design materials with high active volume to improve the efficiency. Tailored grain boundaries and lattice defects are traditionally used to tune the electronic structure near interfaces or defects to promote electron and hole separation. However, the active volume of point defect sites or interfaces in these traditional photocatalysts is extremely low. In this work, we report a structure with continuous atomic positional deformation across the bulk, altering the electronic structure in three-dimension and creating a significantly high active volume. Such a structure in anatase is obtained and tuned by phase transformation during heating process. Transmission electron microscopy and density functional theory results reveal that atomic deformations result in continuous band bending across the particles, facilitating electron–hole separation, inhibiting their recombination, and inducing dramatically enhanced photoactivity. These findings enable a different materials design paradigm that can potentially be harnessed for a broad range of applications.

TiO2↗
DOE OSTI2021

Doping evolution of the Mott–Hubbard landscape in infinite-layer nickelates

The recent observation of superconductivity in N d 0.8 S r 0.2 N i O 2 has raised fundamental questions about the hierarchy of the underlying electronic structure. Calculations suggest that this system falls in the Mott–Hubbard regime, rather than the charge-transfer configuration of other nickel oxides and the superconducting cuprates. Here, we use state-of-the-art, locally resolved electron energy-loss spectroscopy to directly probe the Mott–Hubbard character of N d 1 − x S r x N i O 2 . Upon doping, we observe emergent hybridization reminiscent of the Zhang–Rice singlet via the oxygen-projected states, modification of the Nd 5d states, and the systematic evolution of Ni 3d hybridization and filling. These experimental data provide direct evidence for the multiband electronic structure of the superconducting infinite-layer nickelates, particularly via the effects of hole doping on not only the oxygen but also nickel and rare-earth bands.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unraveling Emergent Quantum States in Magnetic Topological Insulators using High Pressure Neutron Scattering

This proposal aims to uncover novel quantum phenomena under high pressure and understand the pressure effects on the atomic electronic interactions in magnetic topological materials. This program supports a combined neutron scattering and materials discovery of novel magnetic materials that display the coexistence of magnetism plus other physical phenomena such as a non-trivial electronic band topology under high pressure. The goal of this project is to close a long-standing knowledge gap in quantum materials research by developing a high-pressure neutron scattering (HP-NS) toolbox to systematically determine the magnetic structures and electronic interactions present at high pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Machine learning for design principles for single atom catalysts towards electrochemical reactions

Machine learning (ML) integrated density functional theory (DFT) calculations have recently been used to accelerate the design and discovery of heterogeneous catalysts such as single atom catalysts (SACs) through the establishment of deep structure–activity relationships. Here, this review provides recent progress in the ML-aided rational design of heterogeneous catalysts with the focus on SACs in terms of structure–activity relationships, feature importance analysis, high-throughput screening, stability, and metal–support interactions for electrochemistry. Support vector machine (SVM), random forest regression (RFR), and deep neural networks (DNN) along with atomic properties are mainly used for the design of SACs. The ML results have shown that the number of electrons in the d orbital, oxide formation enthalpy, ionization energy, Bader charge, d-band center, and enthalpy of vaporization are mainly the most important parameters for the defining of the structure–activity relationships for electrochemistry. However, the black-box nature of ML techniques occasionally makes a physical interpretation of descriptors, such as the Bader charge, d-band center, and enthalpy of vaporization, non-trivial. At the current stage, ML application is limited by the lack of a large and high-quality database. Future prospects for the development of a large database and a generalized ML algorithm for SAC design are discussed to give insights for further studies in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effects of the surface termination and the oxygen vacancy position on LaNiO 3 ultra-thin films: First-principles study

In this study, while ultra-thin layers of the LaNiO 3 film exhibit a remarkable metal-insulator transition as the film thickness becomes smaller than a few unit cell (u.c.), the formation of possible oxygen vacancies and their effects on the correlated electronic structure have been rarely studied using first principles. Here, we investigate the effects of the surface termination and the oxygen vacancy position on the electronic properties and vacancy energetics of LaNiO 3 ultra-thin films under the compressive strain using density functional theory plus U (DFT + U). We find that oxygen vacancies can be easily formed in the Ni layers with the NiO 2 terminated surface (0.5 u.c. and 1.5 u.c. thickness) compared to the structures with the LaO terminated surface and the in-plane vacancy is energetically favored than the out-of-plane vacancy. When two vacancy sites are allowed, the Ni square plane geometry is energetically more stable in most cases as two oxygen vacancies tend to stay near a Ni ion. Strong anisotropy between the in-plane and out-of-plane vacancy formation as well as the layer and orbital dependent electronic structure occur due to strain, surface termination, charge reconstruction, and quantum confinement effects. The in-plane vacancy of the NiO 2 terminated structure is favored since the released charge due to the oxygen vacancy can be easily accommodated in the d x 2 -y 2 orbital, which is less occupied than the d z 2 orbital. Remarkably, the oxygen vacancy structure containing the Ni square-plane geometry becomes an insulating state in DFT + U with a sizable band gap of 1.2 eV because the large crystal field splitting between d z 2 and d x 2 -y 2 orbitals in the square-plane favors an insulating state and the Mott insulating state is induced in other Ni sites due to strong electronic correlations. In the thin-film structure without oxygen vacancies, the strong correlation effect in DFT + U drives a pseudogap ground state at the Fermi energy, similarly as the experimental photo-emission spectra; however, the variation of the DFT + U electronic structure depending on the surface termination becomes weaker compared to those obtained in DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Superconducting properties of MoTe 2 from ab initio anisotropic Migdal-Eliashberg theory

Molybdenum ditelluride (MoTe 2 ) is attracting considerable interest since it is the archetypal type-II Weyl semimetal and a candidate for topological superconductivity. In this work, we investigate the superconducting phase diagram of two MoTe 2 polymorphs using the ab initio anisotropic Migdal-Eliashberg theory, and we show that the superconducting dome originates from the synergistic contribution of the density of states at the Fermi level and the transverse acoustic Te modes in the 1$\textit{T}’$ phase. We find that the electron and hole pockets carry trivial $\textit{s}$-wave order parameters of slightly different magnitude, reminiscent of a two-gap structure as suggested by recent experiments. We suggest that a possible route for enhancing the superconducting critical temperature, and realizing $s_{+ –}$ pairing, in the $T_d$ phase is to exploit its nontrivial band topology via electron doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Synthesis of 2D layered transition metal (Ni, Co) hydroxides via edge-on condensation

Abstract Layered transition metal hydroxides (LTMHs) with transition metal centers sandwiched between layers of coordinating hydroxide anions have attracted considerable interest for their potential in developing clean energy sources and storage technologies. However, two-dimensional (2D) LTMHs remain largely understudied in terms of physical properties and applications in electronic devices. Here, for the first time we report > 20 μm α-Ni(OH) 2 2D crystals, synthesized from hydrothermal reaction. And an edge-on condensation mechanism assisted with the crystal field geometry is proposed to understand the 2D intra-planar growth of the crystals, which is also testified through series of systematic comparative studies. We also report the successful synthesis of 2D Co(OH) 2 crystals (> 40 μm) with more irregular shape due to the slightly distorted octahedral geometry of the crystal field. Moreover, the detailed structural characterization of synthesized α-Ni(OH) 2 are performed. The optical band gap energy is extrapolated as 2.54 eV from optical absorption measurements and the electronic bandgap is measured as 2.52 eV from reflected electrons energy loss spectroscopy (REELS). We further demonstrate its potential as a wide bandgap (WBG) semiconductor for high voltage operation in 2D electronics with a high breakdown strength, 4.77 MV/cm with 4.9 nm thickness. The successful realization of the 2D LTMHs opens the door for future exploration of more fundamental physical properties and device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthetic Pathways to gamma-Graphyne and Related Allotropes of Carbon

Graphynes, two-dimensional carbon lattices combining sp 1 and sp 2 hybridized atoms, were predicted theoretically more than three decades ago, but few structures have been realized to date. These carbons are believed to possess remarkable mechanical and electronic properties, including high charge carrier mobilities comparable to those in graphene (10 4 to 10 5 cm 2 V -1 s -1 ). Unlike graphene, certain graphynes are predicted to be intrinsic semiconductors. Among these intriguing structures, γ-graphyne stands out as the structurally simplest and most symmetric sp 1 /sp 2 lattice. γ-Graphyne was first theorized in 1987. In contrast with graphene, γ-graphyne will be a semiconductor with a small band gap suitable for fabrication of electronic devices. This solves one of the fundamental problems of carbon-based electronics, the necessity for inducing a band gap in graphene. γ-Graphyne has the potential to form the basis for the next generation of carbon-based electronics operating at speeds unattainable by traditional silicon chips. Unlike silicon, γ-graphyne is a direct band gap semiconductor, and it will feature exceptional strength comparable to that of other 2D carbon allotropes. Such combination of properties may enable a new generation of highly efficient, ultra-light and flexible solar cells. Despite being a potentially “magical” material, γ-graphyne remained synthetically elusive for over three decades. The primary goals of this project were: (1) Synthesis of bulk γ-graphyne phases through solution-phase 2D polymerizations; (2) Experimental exploration of the physical and chemical properties of γ-graphyne; and (3) Mechanistic and theoretical studies of the novel chemical transformations developed in Goal 1. Common pyrolytic and vapor-deposition methodologies used for the synthesis of graphitic allotropes are unsuitable for graphyne and other sp 1 -contaning structures, as acetylenes readily convert to graphene and amorphous carbon at high temperatures. In contrast, this proposal is based on solution-based 2D polymerization. The major advantages of this approach over the traditional high temperature techniques are the potential to adjust the structure of the material with atomic precision, and the possibility of using structurally complex and relatively fragile repeat units. The outcomes of this research can revolutionize carbon nanotechnology, expanding the field’s structural toolbox beyond primarily graphitic and benzenoid structures. Understanding the chemistry of sp 1 carbon allotropes can lead to entirely new classes of structures with unique properties, including graphyne ribbons, nanotubes, quantum dots, and heterostructures with other 2D materials. Furthermore, the development of reliable and robust synthetic pathways towards periodic covalent molecular sheets with atomically precise structures shall have a profound impact on chemistry and materials science.

2D polymerization↗
DOE OSTI2024

Sensitive Thermochromic Behavior of InSeI, a Highly Anisotropic and Tubular 1D van der Waals Crystal

Thermochromism, the change in color of a material with temperature, is the fundamental basis of optical thermometry. A longstanding challenge in realizing sensitive optical thermometers for widespread use is identifying materials with pronounced thermometric optical performance in the visible range. Herein, it is demonstrated that single crystals of indium selenium iodide (InSeI), a 1D van der Waals (vdW) solid consisting of weakly bound helical chains, exhibit considerable visible range thermochromism. A strong temperature-dependent optical band edge absorption shift ranging from 450 to 530 nm (2.8 to 2.3 eV) over a 380 K temperature range with an experimental (dE g /dT) max value extracted to be 1.26 × 10 −3 eV K −1 is shown. This value lies appreciably above most dense conventional semiconductors in the visible range and is comparable to soft lattice solids. The authors further seek to understand the origin of this unusually sensitive thermochromic behavior and find that it arises from strong electron–phonon interactions and anharmonic phonons that significantly broaden band edges and lower the E g with increasing temperature. The identification of structural signatures resulting in sensitive thermochromism in 1D vdW crystals opens avenues in discovering low-dimensional solids with strong temperature-dependent optical responses across broad spectral windows, dimensionalities, and size regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Zr 3 Mn 3 Sn 4 Ga: A new hetero-kagome bilayer antiferromagnet

Here, we report the magnetic and electrical transport properties of single-crystalline Zr 3 Mn 3 Sn 4 Ga, featuring two distinct kagome lattices: a non-magnetic breathing Zr 3 Sn 4 lattice and a magnetic intact Mn 3 Ga lattice. The material undergoes an antiferromagnetic phase transition at T N = 87 K, with neutron diffraction confirming commensurate ordering characterized by k = (1/3,1/3,0). Transport measurements show metallic behavior, a resistivity anomaly near T N , and 12% magnetoresistance at 2 K under 9 T. Deviations from the conventional second-order power law, along with negative magnetoresistance and nonlinear Hall slope variations near T N , suggest strong magneto-electronic coupling. Resonant photoemission spectroscopy identifies Zr 4d and Mn 3d orbitals as dominant contributors to the valence band, linking the material’s unique electronic properties to its kagome layers. Zr 3 Mn 3 Sn 4 Ga offers a valuable platform to study interactions between magnetism and topological electronic bands in hetero-kagome systems using the co- existence of magnetic and non-magnetic kagome layers and its tunable electronic structure.

Crystal structure↗
DOE OSTI2024

Elucidating the Role of InGaAs and InAlAs Buffers on Carrier Dynamics of Tensile-Strained Ge Double Heterostructures

Extensive research efforts of strained germanium (Ge) are currently underway due to its unique properties, namely, (i) possibility of band gap and strain engineering to achieve a direct band gap, thus exhibiting superior radiative properties, and (ii) higher electron and hole mobilities than Si for upcoming technology nodes. Realizing lasing structures is vital to leveraging the benefits of tensile-strained Ge (ε-Ge). Here, we use a combination of different analytical tools to elucidate the effect of the underlying InGaAs/InAlAs and InGaAs overlaying heterostructures on the material quality and strain state of ε-Ge grown by molecular beam epitaxy. Using X-ray analysis, we show the constancy of tensile strain in sub-50 nm ε-Ge in a quantum-well (QW) heterostructure. Further, effective carrier lifetime using photoconductive decay as a function of buffer type exhibited a high (low) defect-limited carrier lifetime of ~68 ns (~13 ns) in 0.61% (0.66%) ε-Ge grown on an InGaAs (InAlAs) buffer. These results correspond well with the measured surface roughness of 1.289 nm (6.303 nm), consistent with the surface effect of the ε-Ge/III–V heterointerface. Furthermore, a reasonably high effective lifetime of ~78 ns is demonstrated in a QW of ~30 nm 1.6% ε-Ge, a moderate reduction from ~99 ns in uncapped ε-Ge, alluding to the surface effect of the overlying heterointerface. Thus, the above results highlight the prime quality of ε-Ge that can be achieved via III–V heteroepitaxy and paves a path for integrated Ge photonics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Three-Dimensional Lead Iodide Perovskitoid Hybrids with High X-ray Photoresponse

Large organic A cations cannot stabilize the 3D perovskite AMX 3 structure because they cannot be accommodated in the cubo-octhedral cage (do not follow the Goldschmidt tolerance factor rule), and they generally template low-dimensional structures. In this paper, we report that the large dication aminomethylpyridinium (AMPY) can template novel 3D structures which resemble conventional perovskites. They have the formula (xAMPY)M 2 I 6 (x = 3 or 4, M = Sn 2+ or Pb 2+ ) which is double of the AMX3 formula. However, because of the steric requirement of the Goldschmidt tolerance factor rule, it is impossible for (xAMPY)M 2 I 6 to form proper perovskite structures. Instead, a combination of corner-sharing and edge-sharing connectivity is adopted in these compounds leading to the new 3D structures. DFT calculations reveal that the compounds are indirect band gap semiconductors with direct band gaps presenting at slightly higher energies and dispersive electronic bands. The indirect band gaps of the Sn and Pb compounds are ~1.7 and 2.0 eV, respectively, which is slightly higher than the corresponding AMI 3 3D perovskites. The Raman spectra for the compounds are diffuse, with a broad rising central peak at very low frequencies around 0 cm –1 , a feature that is characteristic of dynamical lattices, high anharmonicity, and dissipative vibrations very similar to the 3D AMX 3 perovskites. Devices of (3AMPY)Pb 2 I 6 crystals exhibit clear photoresponse under ambient light without applied bias, reflecting a high carrier mobility (μ) and long carrier lifetime (τ). The devices also exhibit sizable X-ray generated photocurrent with a high μτ product of ~1.2×10 -4 cm 2 /V and a X-ray sensitivity of 207 μC∙Gy -1 ∙cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗