Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Effect of Oblique Electromagnetic Ion Cyclotron Waves on Relativistic Electron Scattering: CRRES Based Calculation

We consider the effect of oblique EMIC waves on relativistic electron scattering in the outer radiation belt using simultaneous observations of plasma and wave parameters from CRRES. The main findings can be s ummarized as follows: 1. In 1comparison with field-aligned waves, int ermediate and highly oblique distributions decrease the range of pitc h-angles subject to diffusion, and reduce the local scattering rate b y an order of magnitude at pitch-angles where the principle absolute value of n = 1 resonances operate. Oblique waves allow the absolute va lue of n > 1 resonances to operate, extending the range of local pitc h-angle diffusion down to the loss cone, and increasing the diffusion at lower pitch angles by orders of magnitude; 2. The local diffusion coefficients derived from CRRES data are qualitatively similar to the local results obtained for prescribed plasma/wave parameters. Conseq uently, it is likely that the bounce-averaged diffusion coefficients, if estimated from concurrent data, will exhibit the dependencies similar to those we found for model calculations; 3. In comparison with f ield-aligned waves, intermediate and highly oblique waves decrease th e bounce-averaged scattering rate near the edge of the equatorial lo ss cone by orders of magnitude if the electron energy does not excee d a threshold (approximately equal to 2 - 5 MeV) depending on specified plasma and/or wave parameters; 4. For greater electron energies_ ob lique waves operating the absolute value of n > 1 resonances are more effective and provide the same bounce_averaged diffusion rate near the loss cone as fiel_aligned waves do.

Gamayunov, K. V.↗

High latitude ion composition

A data base comprised of all available ionosphere satellite ion composition measurements - the Goddard Comprehensive Ionosphere Data Base (GCID) - has been set upon optical disks for convenient merging and accessing of data from different satellites. This data has recentely been expanded to include all accessible satellite electron density and plasma temperature measurements. This paper demonstrates with a couple examples, the potential of GCID as an alternative to empirical models for undertanding ionsophere physics and chemistry. Through binning techniques GCID provdes a tool that complements and improves on the International Reference Ionosphere model (IRI) in delineating the topology of high latitude ion composition. GCID provides at a glance a measure of the local statistical variabilty of the ion compostions that is not in empirical models such as IRI. Furthermusing the data to determine the spatial and geophysical parameter range over which the minor ion species are approximately in chemical equilibrium, the number of data points available for empirical ion composition models can be increased by using the statiscally more reliable neutral and electron empirical models to derive ions composition. Currently available empirical models are not capable of adequately defining the comples high latitude distribution - a measure of the variablity is needed.

Grebowsky, J. M.↗

A statistical analysis of the low-energy geosynchronous plasma environment. I - Electrons. II - Ions

Data on the geosynchronous plasma environment between approximately 30 eV and 80 keV are analyzed statistically. Nearly 50 days of 10 minute averages of the first four moments of the distribution function from low-energy plasma detectors on the ATS-5 and ATS-6 geosynchronous satellites were used. The data were studied in terms of occurrence frequency, local time variations, and response to geomagnetic activity. These techniques revealed marked differences in the ATS-5 and ATS-6 data bases. When translated into a 2-Maxwellian representation, it was found that (1) the ATS-6 data covered an energy range not covered by ATS-5 (between 1 and 50 eV) and (2) there was a definite change in the ion plasma between the ATS-5 and ATS-6 measurements. Simple expressions are derived to simulate the relationship between the four moments, and a model is presented, which takes into account the ATS-5 and ATS-6 plasma variations. Despite the differences in the ion data, the accuracy of the four-moment representation was found valid for characterizing the geosynchronous electron population.

Garrett, H. B.↗

Extragalactic cosmic rays.

A detailed analysis is given of the possibility that a large part of the primary cosmic-ray flux is of extragalactic origin. The problems encountered in theories of galactic cosmic rays are first critically discussed. The objections that have previously been raised to extragalactic theories, particularly on energetic grounds, are then examined. The general problem of the propagation of cosmic rays which are ejected from galactic nuclei or in galactic winds to fill clusters and superclusters is dealt with next. Attention is also given to the limits which are set on the presence of extragalactic cosmic rays by observations of high-energy electrons and background X-rays and gamma rays, or the heating of a hypothetical intergalactic gas. Observable effects of cosmic rays between galaxies are studied, and the possible sources of the local cosmic-ray protons in the extragalactic model are considered.

Brecher, K.↗

Experimental investigation of a throttlable 15 cm hollow cathode ion thruster

The use of dished high perveance grids on a 15 cm modified SERT 2 thruster is shown to facilitate throttled operation over a beam current range from 60 to 600 mA. Effects of increasing the radial component of the magnetic field in the main discharge chamber and decreasing the dimensions of the cathode discharge region are examined and found to degrade performance to the extent that primary electrons are forced in toward the center-line of the thruster. Studies of the baffle aperture region of two thrusters indicate that the electric potential gradient vector is perpendicular to the local magnetic field lines when the thruster is operating properly. The correlation between the shape of the ion beam current density and that of the ion density at the screen grid within the thruster is shown to be 94%. Additional experimental studies on maximum propellant utilization, plasma ion production cost, neutral density in the cathode discharge region, double ion production in hollow cathode thrusters and thermal flow meter performance are discussed.

Wilbur, P. J.↗

Cosmic rays at very high energies - Discussion of some new results

Recent measurements of the nuclear cosmic ray composition up to 100 GeV/n and of the spectrum of cosmic ray electrons to almost 1000 GeV have provided new evidence relevant to the origin of these particles and to their propagation in the interstellar medium. It was shown that the abundance of galactic daughter nuclei decreases with increasing energy relative to the abundance of parent nuclei. It was also found that the energy spectrum of electrons is consistent with a single power law up to 1000 GeV without much steepening. These results are possibly related, and the present work discusses them in terms of (1) a relatively local origin of energetic cosmic rays, (2) an extragalactic origin of the cosmic radiation, and (3) an energy dependent confinement of galactic cosmic rays.

Juliusson, E.↗

The earth as a radio source - The nonthermal continuum

It is shown that a weak nonthermal continuum is produced by the earth's magnetosphere extending over a very wide range of frequencies, from 500 Hz in the low-density regions of the magnetotail to above 100 kHz. The frequency spectrum of the continuum radiation consists of two components: a trapped component within the magnetosphere at frequencies below the solar wind plasma frequency and an escaping component propagating freely away from the earth at frequencies above the solar wind plasma frequency. It is also shown that the continuum radiation is generated in a broad region extending through the morning and early afternoon from about 4.0 to 14.0 hours local time immediately beyond the plasmapause boundary, at radial distances from 4.0 to 8.0 earth radii. Possible mechanisms underlying the generation of this radiation are discussed, including the gyrosynchrotron radiation from energetic electrons in the outer radiation zone.

Gurnett, D. A.↗

Characterization of electrical discharges on Teflon dielectrics used as spacecraft thermal control

The dual effects of system degradation and reduced life of synchronous-orbit satellites as a result of differential spacecraft charging underscore the need for a clearer understanding of the prevailing electrical discharge phenomena. In a laboratory simulation, the electrical discharge current, surface voltage, emitted particle fluxes, and photo-emission associated with discharge events on electron beam irradiated silver-backed Teflon samples were measured. Sample surface damage was examined with optical and electron beam microscopes. The results are suggestive of a model in which the entire sample surface is discharged by lateral sub-surface currents flowing from a charge deposition layer through a localized discharge channel to the back surface of the sample. The associated return current pulse appears to have a duration which may be a signature by which different discharge processes may be characterized.

Yadlowsky, E. J.↗

Influence of non-stationary field of magnetospheric convection on the D-region

Perturbations of F region electron density caused by the extension of magnetospheric convection electric field to middle latitudes are already well known. For the D region of the first observations are believed to be reported by Eliseyev, Kashpar and Nikitin (1988). On several occasions, following the southward turning of the Bz-component of interplanetary magnetic field (IMF) small disturbances of the D region electron density were detected at night by steep-incidence VLF sounding, which may be attributed to the influence of the penetrated convection electric field (CEF). Some evidence is given of a local time dependence of the CEF effect in the D region and a rather good correlation is demonstrated at the initial stage of disturbance between high latitude magnetic field variations and simultaneous perturbation of the midlatitude ionospheric reflection height.

Eliseyev, A. YU.↗

The application of the RELIEF technique for velocity field measurements in the ASTF C1 test cell

The Aeropropulsion Systems Test Facility (ASTF) C1 Test Cell is to be configured for propulsion tests of National Aerospace Plane (NASP) engines over flight Mach number conditions ranging from 0.5 to 3.8. This facility is capable of continuously generating a 5 ft. x 5 ft. square free air jet flow field at a local Mach number up to 3.32 with a density of between 0.134 and 0.048 amagat and a static temperature of 257 K or less. The potential of the Raman Excitation + Laser Induced Electronic Fluorescence (RELIEF) velocity measurement technique for measuring the three dimensional velocity profile across the exit plane of this jet and the entrance plane to the test engine under these conditions is examined. Velocity measurements must be done to an accuracy of better than 1 percent. Flow direction must be measured to better than 1 deg for inlet performance evaluation. Measurements to these specifications need to be done with a grid spacing of approximately 1/100th of the cross sectional dimension of the free jet exit in a time not greater than 30 seconds.

Source record↗

Plasma turbulence enhanced current collection: Results from the plasma motor generator electrodynamic tether flight

The plasma motor generator (PMG) experiment, launched June 26, 1993, was a tethered system of two identical plasma contactors connected via a 500-m conducting tether. The experiment was designed to demonstrate the ability of plasma contactors to provide a low-impedance connection between a spacecraft and the ionosphere for both the electron emission and collection. The flight data indicate that plasma contactors enhance electron collection and emission by both neutralizing the electron space charge and scattering electrons across the geomagnetic field lines. Up to a 0.3 A steady current flowed along the tether in a curcuit completed through the ionosphere. An analytical model for plasma contactor interaction with a background plasma which incorporates electron scattering by plasma waves is compared with the flight data. Good agreement between the model and the data is achieved for an effective scattering frequency equal to one twentieth of the local plasma contactor plasma frequency.

Katz, I.↗

Longitudinal and Seasonal Variations in Nighttime Plasma Temperatures in the Equatorial Topside Ionosphere During Solar Maximum

Latitude profiles of the ion and electron temperatures and total ion concentration across the equatorial region near 800 km altitude are routinely obtained from Defense Meteorological Satellite Program (DMSP) spacecraft. We have examined these profiles at 2100 hours local time to discover the influences of field-aligned plasma transport induced by F region neutral winds. Such dependencies are readily seen by contrasting observations at different seasons and different longitudes distinguished by different magnetic declinations. These data show strong evidence for adiabatic heating produced by interhemispheric plasma transport. This heating manifests itself as a local temperature maximum that appears in the winter hemisphere during the solstices and is generally absent during equinox. A longitudinal variation in the appearance of this maximum is consistent with the roles of meridional and zonal winds in modulating the field-aligned plasma velocities. The data also show a local temperature minimum near the dip equator. However, it is not so easy to attribute this minimum to adiabatic cooling since transport of plasma from below and the latitude variation in the flux tube content may also produce such a minimum.

Venkatraman, Sarita↗

Generation and Scattering of Radiation Observed by Voyager in the Outer Heliosphere

Excellent progress was made under this grant on the generation and scattering of the 2-3 kHz radio emissions observed by the Voyager spacecraft in the outer heliosphere. These are the most powerful radio emissions produced in our solar system, surpassing even those of Jupiter and the Sun. The widely-held hypothesis pursued is that the radiation is generated near the electron plasma frequency f(sub p) or near 2f(sub p) as a shock wave traverses the heliosheath regions and/or heliopause predicted in the interaction region between the solar wind and the local interstellar medium. (Note that f (sup 2) (sub p) is proportional to the plasma density.) The traveling shock wave is plausibly associated with a global merged interaction region (GMIR). Accordingly, this so-called GMIR model is strongly analogous to the common interpretation of type II solar radio bursts and to radio emissions associated with Earth's bow shock, with coronal mass ejections (CMEs) and Earth's magnetosphere playing the role of a GMIR, respectively. Accordingly, Dr Cairns work on type II bursts, Earth's foreshock, and stochastic growth theory (not described in detail) strongly aided and complemented the research progress on the 2-3 kHz emissions described.

Spangler, Steven R.↗

Optically Transparent Split-Ring Antennas for 1 to 10 GHz

Split-ring antennas made from optically transparent, electrically conductive films have been invented for applications in which there are requirements for compact antennas capable of operation over much or all of the frequency band from 1 to 10 GHz. Primary examples of such applications include wireless local-area networks and industrial, scientific, and medical (ISM) applications. These antennas can be conveniently located on such surfaces as those of automobile windows and display screens of diverse hand-held electronic units. They are fabricated by conventional printed-circuit techniques and can easily be integrated with solid-state amplifier circuits to enhance gain. The structure of an antenna of this type includes an antenna/feed layer supported on the top or outer face of a dielectric (e.g., glass) and, optionally, a ground layer on the bottom or inner face of the substrate. The ring can be in the form of either a conductive strip or a slot in the antenna/feed layer. The ring can be of rectangular, square, circular, elliptical, or other suitable shape and can be excited by means of a microstrip, slot line, or coplanar waveguide. For example, the antenna shown in the figure features a square conductive-strip split ring with a microstrip feed. In general, an antenna fed at its external boundary in the manner of this invention presents very high impedance, thereby creating an impedance-matching problem. Splitting the ring . that is, cutting a notch through the ring . offers a solution to the problem in that the notch fixes the location of maximum electric field, which location is directly related to the impedance. Thus, an excellent impedance match can be achieved through proper choice of the location of the notch. In geometric layout, such a ring antenna structure is typically between 1.4 and 1.3 the size of a patch antenna capable of operating in the same frequency range. This miniaturization of the antenna is desirable, not only because it contributes to overall miniaturization of equipment, but also because minimization of the extent of the optically transparent, electrically conductive film helps to minimize the electrical loss associated with the surface resistance ( 5 ohms per square) of the transparent, electrically conductive film material. Incidentally, even at 5 ohms per square, this surface resistance is significantly less than that of indium tin oxide film (typically > 25 ohms per square), which, heretofore has been the transparent, electrically conductive film material of choice. At the time of writing this article, information on the composition of the lower-resistance film used in the antennas of this invention was not available.

Lee, Richard Q.↗

An Estimate of the Dust Pickup Currents at Enceladus

The electrodynamic environment at Enceladus is often assumed to be driven exclusively by ions produced from the moon's south polar plume. In this presentation, we demonstrate that acceleration of moon-originating submicron dust by the reduced co-rotating E-field is capable of creating a substantial current perpendicular to the magnetic field. This pickup current may be comparable to the ion pickup current, and may be large enough to deflect the local magnetic field. We will analyze observations from the Langmuir Probe that is a component of Cassini's Radio and Plasma Wave Science (RPWS) package, along with associated plasma waves that reveal electron concentrations. We will especially examine the observations from the 12 March 2008 spacecraft passage by the body, where the spacecraft was moving primarily southward taking it along-side the jet/plume emitted from the south pole of the moon. The region of dust pickup is found to originate about 3-5 Enceladus radii northward of the moon, and extends to at least 10 radii southward of the moon. We attempt to quantify the dust pickup current and describe the effect the current might have on the overall magnetoplasma and E-field environment in the vicinity of the body.

Farrell, William M.↗

Optical Sensors for Monitoring Gamma and Neutron Radiation

For safety and efficiency, nuclear reactors must be carefully monitored to provide feedback that enables the fission rate to be held at a constant target level via adjustments in the position of neutron-absorbing rods and moderating coolant flow rates. For automated reactor control, the monitoring system should provide calibrated analog or digital output. The sensors must survive and produce reliable output with minimal drift for at least one to two years, for replacement only during refueling. Small sensor size is preferred to enable more sensors to be placed in the core for more detailed characterization of the local fission rate and fuel consumption, since local deviations from the norm tend to amplify themselves. Currently, reactors are monitored by local power range meters (LPRMs) based on the neutron flux or gamma thermometers based on the gamma flux. LPRMs tend to be bulky, while gamma thermometers are subject to unwanted drift. Both electronic reactor sensors are plagued by electrical noise induced by ionizing radiation near the reactor core. A fiber optic sensor system was developed that is capable of tracking thermal neutron fluence and gamma flux in order to monitor nuclear reactor fission rates. The system provides near-real-time feedback from small- profile probes that are not sensitive to electromagnetic noise. The key novel feature is the practical design of fiber optic radiation sensors. The use of an actinoid element to monitor neutron flux in fiber optic EFPI (extrinsic Fabry-Perot interferometric) sensors is a new use of material. The materials and structure used in the sensor construction can be adjusted to result in a sensor that is sensitive to just thermal, gamma, or neutron stimulus, or any combination of the three. The tested design showed low sensitivity to thermal and gamma stimuli and high sensitivity to neutrons, with a fast response time.

Boyd, Clark D.↗

Magnetic Reconnection in a Quasi‐Parallel Shock: Two‐Dimensional Local Particle‐in‐Cell Simulation

Magnetic reconnection in a quasi‐parallel bow shock is investigated with two‐dimensional local particle‐in‐cell simulations. In the shock transition and downstream regions, large amplitude magnetic fluctuations exist, and abundant current sheets form. In some current sheets, reconnection occurs, and ion‐scale and electron‐scale magnetic islands are generated. In electron‐scale island regions, only electron outflow jets are observed, producing a quadrupolar out‐of‐plane magnetic field pattern, while in ion‐scale islands, both ions and electrons are involved and energized in reconnection. Normalized reconnection rates are obtained to be between around 0.1 to 0.2, and particle acceleration signatures are seen in distribution functions.

Bessho, N.↗

Power System Redundancy Design Trends for All-Electric eVTOL Quadrotors

Electrical vertical takeoff and landing (eVTOL) vehicles promise to enable a variety of new local and intraregional air transport missions. However, there are significant challenges that must be solved to enable their use. One challenge is the relatively low reliability of power components (e.g. motors, power electronic devices, and batteries). No clear development path to create reliable eVTOL power systems has been articulated in the literature, though it is generally assumed redundancy is part of the solution. This work proposes an analysis process to examine the redundancy design space and select mass optimal designs for eVTOL power systems. The process is applied to a six passenger quadrotor vehicle, and results are used to highlight redundancy design trends for this class of vehicle. This process and associated data can help vehicle designers more effectively develop eVTOLs that meet reliability requirements.

Electric vertical takeoff and landing↗