Sintered nanostructured alloys for advanced fusion energy applications
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “direct current”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-temperature nanoindentation creep studies on castable and sintered nanostructured low-activation ferritic-martensitic alloys
In this article, we present the creep characteristics of two reduced activation ferritic-martensitic steels of identical starting compositions formed by different fabrication routes: a nanostructured ferritic alloy commonly referred to as a castable nanostructured alloy (CNA) and a sintered nanostructured alloy (SNA) variant. Through a series of nanoindentation experiments spanning a temperature range of 25 °C to 650 °C, with a maximum load of 100 mN, we find creep behaviors in the cast and sintered materials to be remarkably similar. The creep stress exponent (n) for CNA and SNA were found to be in the range of 8–35 and the activation volume was ∼14–42b 3 , underscoring a dominance of dislocation-mediated mechanisms in both alloys. Notably, we observed a decline in the creep stress exponent with increasing temperature, attributable to the heightened influence of thermally activated dislocations. This phenomenon suggests a potential transition in the deformation mechanism towards a thermally activated dislocation climb process, significantly impacting the observed creep behavior.
36 MATERIALS SCIENCE↗
High-Sensitivity Low-Energy Ion Spectroscopy with Sub-Nanometer Depth Resolution Reveals Oxidation Resistance of MoS 2 Increases with Film Density and Shear-Induced Nanostructural Modifications of the Surface
For decades, density has been attributed as a critical aspect of the structure of sputter-deposited nanocrystalline molybdenum disulfide (MoS 2 ) coatings impacting oxidation resistance and wear resistance. Despite its importance, there are few examples in the literature that explicitly investigate the relationship between the density and oxidation behaviors of MoS 2 coatings. Aging and oxidation are primary considerations for the use of MoS 2 coatings in aerospace applications as they inevitably experience prolonged storage in water and oxygen-rich environments prior to use. Oxidation that is either limited to the first few nanometers or through the bulk of the coating can result in seizure due to high initial coefficients of friction or component failure from excessive wear. High-sensitivity low-energy ion spectroscopy (HS-LEIS) and Rutherford backscattering spectrometry (RBS) are both used to understand the extent of oxidation throughout the first ~10 nanometers of the surface of pure sputtered nanocrystalline MoS 2 coatings after high-temperature aging and how it is impacted by the density of coatings as measured by RBS. Results show that low-density coatings (ρ = 3.55 g/cm 3 ) exhibit a more columnar microstructure and voiding, which act as pathways for oxidative species to penetrate and interact with edge sites, causing severe surface and subsurface oxidation. Furthermore, HS-LEIS of surfaces sheared prior to oxidation reveals that the oxidation resistance of low-density MoS 2 coatings can be significantly improved by shear-induced reorientation of the surface microstructure to a basal orientation and elimination of pathways for oxygen into the bulk through compaction of surface and subsurface voids.
36 MATERIALS SCIENCE↗
Evolving Interior Mixing Regimes in a Tidal River Plume
Microstructure profiling was utilized to estimate vertical mixing (via vertical turbulent buoyancy flux) during a tidal pulse in the interior Merrimack River plume in calm winds. Multiple stratified shear mixing regimes appear and evolve with time. Initially the plume acts as a nearfield jet, with mixing in the plume (plume layer mixing) and over the plume-ambient interface (nearfield interfacial mixing). As the plume grows, interfacial mixing is suppressed offshore of the nearfield as currents slow, diminishing turbulent exchange between plume and shelf. At the end of ebb, ambient tidal currents reverse direction below plume, initiating another mode of internal, interfacial mixing (coined here as tidal interfacial mixing), allowing exchange between plume and ambient waters offshore. This work highlights previously unreported tidally modulated mixing within the near and midfield of a river plume.
54 ENVIRONMENTAL SCIENCES↗
Measuring the capabilities of quantum computers
Quantum computers can now run interesting programs, but each processor’s capability—the set of programs that it can run successfully—is limited by hardware errors. These errors can be complicated, making it difficult to accurately predict a processor’s capability. Benchmarks can be used to measure capability directly, but current benchmarks have limited flexibility and scale poorly to many-qubit processors. We show how to construct scalable, efficiently verifiable benchmarks based on any program by using a technique that we call circuit mirroring. With it, we construct two flexible, scalable volumetric benchmarks based on randomized and periodically ordered programs. We use these benchmarks to map out the capabilities of twelve publicly available processors, and to measure the impact of program structure on each one. We find that standard error metrics are poor predictors of whether a program will run successfully on today’s hardware, and that current processors vary widely in their sensitivity to program structure.
97 MATHEMATICS AND COMPUTING↗
Contactless measurement of the photovoltage in BiVO 4 photoelectrodes
The power output of photoelectrochemical devices for solar energy-to-fuel conversion is determined by the photovoltage of the junction under illumination. In the presence of fast redox couples, the photovoltage can be obtained directly from current–voltage measurements of the device. However, for slow redox couples (H + /H 2 , O 2 /H 2 O) used in solar fuel photoelectrodes, photovoltage measurements are not straightforward, due to the kinetic overpotentials during charge transfer. Here we show that the photovoltage of BiVO 4 electrodes in contact with fast electron donors KI, Na 2 SO 3 or H 2 O 2 or K 4 Fe(CN) 6 can be measured in a contactless way with vibrating Kelvin probe surface photovoltage (SPV) spectroscopy. The photovoltage varies with illumination wavelength and intensity and matches the open circuit potential of the electrodes, obtained separately from electrochemical measurements. Plots of the photovoltage versus irradiance can be used to predict the oxidizing power of each electrode under zero applied bias. Except for K 4 Fe(CN) 6 , which causes shunting in the BiVO 4 electrode, photovoltage values correlate well with the built-in potential of each junction. Furthermore, the ability to obtain photovoltage information through contactless SPV measurements will be useful in the search for solid–liquid junctions with superior energy conversion properties.
14 SOLAR ENERGY↗
Phase-resolved electrical detection of coherently coupled magnonic devices
We demonstrate the electrical detection of magnon-magnon hybrid dynamics in yttrium iron garnet/Permalloy (YIG/Py) thin film bilayer devices. Direct microwave current injection through the conductive Py layer excites the hybrid dynamics consisting of the uniform mode of Py and the first standing spin wave (n=1) mode of YIG, which are coupled via interfacial exchange. Both the two hybrid modes, with Py- or YIG-dominated excitations, can be detected via the spin rectification signals from the conductive Py layer, providing phase resolution of the coupled dynamics. The phase characterization is also applied to a nonlocally excited Py device, revealing the additional phase shift due to the perpendicular Oersted field. Our results provide a device platform for exploring hybrid magnonic dynamics and probing their phases, which are crucial for implementing coherent information processing with magnon excitations.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Time-dependent experimental identification of inter-ELM microtearing modes in the tokamak edge on DIII-D
In a series of discharges on the DIII-D tokamak, fast vertical plasma jogs are used to induce current perturbations in the steep gradient region of the H-mode edge. These current perturbations directly influence the edge q profile, decoupling the resonant location and instability drive of pedestal-localized microtearing modes (MTMs.) By exploiting this effect, we develop and apply a new experimental technique to track the dynamical frequency evolution of MTMs in the pedestal region, providing a compelling validation of the MTM model. The frequency of potential MTMs is calculated as the Doppler-shifted electron diamagnetic frequency at rational q=m/n surfaces, showing remarkable agreement with chirped frequency behavior of n=3, 4 and 5 modes detected with fast magnetics. Data is collected throughout multiple ELM cycles in order to build robust statistics describing the time-dependent frequency evolution of MTMs, which can be explained by examining the recovery of pedestal gradients after an ELM event. MTMs have a dominant transport contribution in the electron thermal channel, so the presented results indicate that reduced models of pedestal transport must be electromagnetic in nature and constructed with accurate calculations of MTM stability; inclusion of this physics is essential for accurate predictions of the electron temperature pedestal profile. Supporting measurements of mode saturation, propagation direction and transport fingerprints are made to support the dynamic frequency determination, unambiguously and experimentally identifying MTMs in the pedestal region of DIII-D.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Abatement of ionizing radiation for superconducting quantum devices
Ionizing radiation has been shown to reduce the performance of superconducting quantum circuits. In this report, we evaluate the expected contributions of different sources of ambient radioactivity for typical superconducting qubit experiment platforms. Our assessment of radioactivity inside a typical cryostat highlights the importance of selecting appropriate materials for the experiment components nearest to qubit devices, such as packaging and electrical interconnects. We present a shallow underground facility (30-meter water equivalent) to reduce the flux of cosmic rays and a lead shielded cryostat to abate the naturally occurring radiogenic gamma-ray flux in the laboratory environment. We predict that superconducting qubit devices operated in this facility could experience a reduced rate of correlated multi-qubit errors by a factor of approximately 20 relative to the rate in a typical above-ground, unshielded facility. Finally, we outline overall design improvements that would be required to further reduce the residual ionizing radiation rate, down to the limit of current generation direct detection dark matter experiments.
47 OTHER INSTRUMENTATION↗
Dimensional crossover in spin Hall oscillators
Auto-oscillations of magnetization driven by direct spin current have been previously observed in multiple quasi-zero-dimensional (0D) ferromagnetic systems such as nanomagnets and nanocontacts. Recently, it was shown that pure spin Hall current can excite coherent auto-oscillatory dynamics in quasi-one-dimensional (1D) ferromagnetic nanowires but not in quasi-two-dimensional (2D) ferromagnetic films. Here we study the 1D to 2D dimensional crossover of current-driven magnetization dynamics in wire-based Pt/Ni 80 Fe 20 bilayer spin Hall oscillators via varying the wire width. We find that increasing the wire width results in an increase of the number of excited auto-oscillatory modes accompanied by a decrease of the amplitude and coherence of each mode. We also observe a crossover from a hard to a soft onset of the auto-oscillations with increasing wire width. The amplitude of auto-oscillations rapidly decreases with increasing temperature suggesting that interactions of the phase-coherent auto-oscillatory modes with incoherent thermal magnons play an important role in suppression of the auto-oscillatory dynamics. Our measurements in this work set the upper limit on the dimensions of an individual spin Hall oscillator and elucidate the mechanisms leading to suppression of coherent auto-oscillations with increasing oscillator size.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Electrostatic modulation of the lateral carrier density profile in field effect devices with nonlinear dielectrics
The properties of two-dimensional (2D) electronic systems are often effectively controlled using electrostatic gating. The geometry of such field effect devices influences the effectiveness of the gate and the carrier density profile in the 2D device. Here, in this work, we analyze the gate-induced spatial variations in the lateral carrier density in patterned LaAlO 3 /SrTiO 3 devices. We model the electrostatics of the 2D interface using the Thomas-Fermi approximation and compute the gate-induced charge distribution at the interface. We show that the electric field lines generated by the gate are focused at the edges of the device, causing an increased depletion near its edges. This effect is accentuated in LaAlO 3 /SrTiO 3 due to the large, nonlinear dielectric constant of the substrate, and the large distance between the gate electrode and the interface. We experimentally demonstrate one consequence of this effect by directly imaging current distributions in gated heterostructures, finding that insulating regions nucleate at the edges of the device due to the gate. Our results suggest that device geometry and choice of dielectric materials control the charge distribution in 2D systems.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Direct Measurement of the Return Current Instability in a Laser-Produced Plasma
Measurements were made of the return current instability growth rate, demonstrating its concurrence with nonlocal transport. Thomson scattering was used to measure a maximum growth rate of 5.1 × 10 9 Hz, which was 3 times less than classical Spitzer-Härm theory predicts. Here, the measured plasma conditions indicate the heat flux was nonlocal, and Vlasov–Fokker-Planck simulations that account for nonlocality reproduce the measured growth rates. Furthermore, the threshold for the return current instability was measured (δ T = 0.017 ± 0.002) to be in good agreement with previous theoretical models.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Securing 3D NAND Without Density Loss via In-Situ Encryption Using a Single Transistor XOR Cell
In this article, we push lightweight XOR-based in-situ encryption to extreme density by proposing a singletransistor XOR memory cell and applying it to 3D NAND, enabling secure data storage without density loss. Using a ferroelectric field-effect transistor (FeFET) as an example technology, we demonstrate that: i) a single-transistor memory can realize the XOR function by exploiting the ability to charge the source and drain separately and control current flow direction, eliminating the need for conventional encrypted cells that rely on complementary devices; ii) with a XOR-based cipher, encryption and decryption can be mapped to in-situ array operations, where ciphertext is stored as the threshold voltage (VTH) states of FeFETs in a NAND string, and decryption is achieved through read operations using key-dependent complementary source/drain bias; iii) the proposed technique is scalable to multi-level cell (MLC) storage by encrypting and decrypting data bit by bit; iv) using an integrated NAND FeFET array, we experimentally demonstrate encryption and decryption operations for both single-level cell (SLC) and MLC storage; v) systemlevel benchmarking shows that the proposed technique achieves 48× and 278× improvements in encryption and decryption throughput, respectively, compared to AES.
36 MATERIALS SCIENCE↗
Critical Shear Stress for Erosion Under Laminar Jet Flow
Particle erosion is an important process in both natural and manmade environments. For example, in natural environments particle or sediment erosion rates determine the course of rivers, depth of streams, and fate of deltas. The interplay between erosion rates and flow patterns can have dramatic impact on shorelines. Where hydrodynamic jet flows or rip currents change direction, sediments may accumulate or disperse altering the shape of coastlines and the ecosystems and economies that rely on them. In man-made systems, jet flows may be used to mobilize particles from surfaces or within industrial scale mixing tanks. For example, in the nuclear industry, impinging jet mixers may be used to mobilize and suspend sludges at the bottom of waste tanks. In each of these examples, the Shields diagram is useful to determine the conditions under which erosion occurs. This diagram plots the scaled critical shear stress for erosion as a function of the particle size as embedded in particle Reynolds numbers, Archimedes numbers, or their equivalents. Although the data, that carries a large spread, is largely in agreement with mathematical models, for the smallest particles, model predictions diverge from each other and from experimental data. Indeed, there is substantial uncertainty about the Shields diagrams at relatively small particle sizes and flow rates. Here we evaluate critical shear stresses for erosion under laminar jet flow. To date critical shear stresses for erosion, as embodied in Shields diagrams, have largely been developed for turbulent flow both experimental and mathematically. However, curves on the Shields diagrams diverge among various models at lower particle Reynolds numbers. Indeed, how critical shear stresses for erosion develop under fully laminar jet flow conditions (not simply laminar boundary layers under turbulent flow) remains unclear. Here we address this gap, which is particularly important for mobilization of the smallest particles. We find the Shields parameter to be inversely proportional to the particle Reynolds numbers under laminar jet flow conditions similar to turbulent conditions.
critical shear stresses, erosion rates, effective ↗
Observing and modeling the effects of production infrastructure in electromagnetic surveys
Electromagnetic (EM) methods are among the original techniques for subsurface characterization in exploration geophysics because of their particular sensitivity to the earth electrical conductivity, a physical property of rocks distinct yet complementary to density, magnetization, and strength. However, this unique ability also makes them sensitive to metallic artifacts — infrastructure such as pipes, cables, and other forms of cultural clutter — the EM footprint of which often far exceeds their diminutive stature when compared to that of bulk rock itself. In the hunt for buried treasure or unexploded ordnance, this is an advantage; in the long-term monitoring of mature oil fields after decades of production, it is quite troublesome indeed. In this study we consider the latter through the lens of an evolving energy industry landscape in which the traditional methods of EM characterization for the exploration geophysicist are applied toward emergent problems in well-casing integrity, carbon capture and storage, and overall situational awareness in the oil field. We introduce case studies from these exemplars, showing how signals from metallic artifacts can dominate those from the target itself and impose significant burdens on the requisite simulation complexity. Furthermore, we show how recent advances in numerical methods mitigate the computational explosivity of infrastructure modeling, providing feasible and real-time analysis tools for the desktop geophysicist. Lastly, we demonstrate through comparison of field data and simulation results that incorporation of infrastructure into the analysis of such geophysical data is, in a growing number of cases, a requisite but now manageable step.
58 GEOSCIENCES↗
DeepShake: Shaking Intensity Prediction Using Deep Spatiotemporal RNNs for Earthquake Early Warning
Abstract We propose a deep spatiotemporal recurrent neural network, DeepShake, to project future shaking intensity directly from current ground-motion observations. DeepShake is a network-based forecasting model, able to predict future shaking intensity at all stations within a network given previously measured ground shaking. The model is not given any a priori knowledge of station locations; instead, it learns wave propagation amplitudes and delays solely from training data. We developed DeepShake with the 35,679 earthquakes from the 2019 Ridgecrest sequence. Tasked with alerting for modified Mercalli intensity (MMI) IV+ shaking on 3568 validation earthquakes at least 5 s in advance, DeepShake achieves an equal error rate of 11.4%. For the Mw 7.1 earthquake that hit Ridgecrest on 5 July 2019, DeepShake was able to provide targeted alerts to all stations inside the network 5 s prior to the arrival of MMI IV+ waveforms. DeepShake demonstrates that deep spatiotemporal neural networks can effectively provide one-step earthquake early warning with reasonable accuracy and latency.
Geochemistry & Geophysics↗
An Adaptive Framework for Extreme Deformation and Failure in Solids
Recent developments at Sandia in meshfree methods have delivered improved robustness in solid mechanics problems that prove difficult for traditional Lagrangian, mesh-based finite elements. Nevertheless, there remains a limitation in accurately predicting very large material deformations. It seems robust meshfree discretizations and integration schemes are necessary, but not sufficient, to close this capability gap. This state of affairs directly impacts current and future LEPs, whose simulation needs are not well met for extremely large deformation problems. We propose to use a new numerical framework, the Optimal Transportation Meshfree (OTM) method enhanced by meshfree adaptivity, as we believe that a combination of both will provide a novel way to close this capability gap.
36 MATERIALS SCIENCE↗
Software Bill of Materials (SBOM) Sharing Lifecycle Report
As Software Bill of Materials (SBOM) adoption efforts mature, SBOM sharing continues to occur, but no single solution or set of solutions have become ubiquitous. The purpose of this report is to enumerate and describe the different parties and phases of the SBOM sharing lifecycle and assist readers in choosing suitable SBOM sharing solutions based on the amount of time, resources, subject-matter expertise, effort, and access to tooling that is available to the reader to implement a phase of the SBOM sharing lifecycle. The SBOM sharing lifecycle consists of the Discovery, Access, and Transport of an SBOM and this report details these individual phases and how an SBOM goes from author to the consumer. This report also details how potential enrichment activities may be performed on an SBOM to create a new product before or after it has been shared. The concept of a sophistication classification for SBOM sharing solutions is concurrently introduced with a focus on the inclusion or lack of certain features and effort associated with their implementation. Examples of low, medium, and high-sophistication solutions are provided; however, these examples and associated categorizations should not be seen as a qualitative judgment meant to push the reader towards a particular adoption strategy since sharing solutions are chosen based on the unique needs of the user. This report does recommend the SBOM community consider how to make current and future sharing solutions interoperable with each other as well as more automated methods to facilitate sharing and broader SBOM adoption. This report also highlights an SBOM sharing survey results obtained from interviews with stakeholders to understand the current SBOM sharing landscape. The categorized results of the survey suggest that SBOMs are currently transported directly to the receiver through email or similar informal communication mechanisms or alternatively the SBOM resides on a repository available to consumers. In addition to these transport methods, this report captures industry efforts to create private sharing solutions and services that can store and transport enrichment data and may use higher sophistication features that are cloud-based or using distributed ledger technologies.
97 MATHEMATICS AND COMPUTING↗