Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Numerical investigations in three-dimensional internal flows

In order to develop an understanding of flow fields that exist in sidewall compression inlet models, an explicit, time-accurate full Navier-Stokes code was used to model them. Both laminar and turbulent boundary layers were numerically simulated. These simulations were examined as they were influenced by Mach number, changes in sidewall compression angle, hypersonic viscous interaction effects, and thick entering boundary layers. Cause and effect relationships were established. The numerical simulations were compared with the limited data available to aid in understanding both the simulations and the experiments.

Rose, William C.↗

SPACEFLIGHT-INDUCED CHANGES IN MICROBIAL VIRULENCE AND THE IMPACT TO THE HOST IMMUNE RESPONSE

INTRODUCTION Over the past 50 years, microorganisms have displayed unexpected responses relevant to infectious disease when grown in microgravity and microgravity analogue environments, including changes in final cell concentration, biofilm production, stress resistance, antibiotic sensitivity, gene expression, and virulence. In parallel, astronaut studies have characterized a persistent spaceflight-induced dysregulation of the human immune system; consisting of altered leukocyte distribution, reductions in T and NK cell function, altered cytokine profiles, and reactivation of latent herpesviruses. Further, astronauts have some degree of clinical incidence, primarily infectious disease episodes and atopic dermatitis. The impact of the microgravity environment on host-pathogen interactions and potential for clinical disease remains understudied and poorly characterized. SPECIFIC AIMS In the Host-Microorganism, Microbial Response aspect of this study, the following Specific Aims are being investigated, using the microbial pathogens, Salmonella enterica Enteritidis, Pseudomonas aeruginosa, Burkholderia cepacia, Streptococcus pneumoniae, and enterohemorrhagic Escherichia coli. Aim 1: Characterize the effect of spaceflight analogue culture on microbial pathogenesis-related stress responses and in vitro host-pathogen interactions. Analysis will include microbial stress responses as well as colonization and viability following pathogen challenge of three-dimensional (3-D) tissue co-culture models containing immune cells. We specifically selected obligate and opportunistic pathogens that are medically important and have been or are likely to be found aboard spacecraft. Aim 2: Characterize the effect of spaceflight analogue culture on the virulence potential of pathogenic microorganisms. Changes in virulence will be assessed using a mouse model of infection. SIGNIFICANCE The goal of this study is to use spaceflight analogue conditions to gain insight into the breadth of medically-significant International Space Station microorganisms that have altered virulence and the impact of those changes on the immune response of the host, including astronaut immune cells. This information will provide critical understanding into the impact of microgravity on potential alterations in microbial virulence and associated infectious disease risk to crew health during spaceflight missions.

C. M. Ott↗

Application of the steepest ascent optimization method to a reentry trajectory problem

The direct optimization method is presented in detail. Nominal values of the control variables are input parameters. Perturbations are introduced into the control variables and the resulting first order predictions of changes in the payoff, and constraint functions are then determined. Through a sequence of prescribed cycles, a trajectory is eventually obtained which is reasonably close to the optimum. The method is successfully applied to an Apollo three-dimensional reentry problem. The study of this Apollo application problem has resulted in the development of a highly flexible computer program that can be modified to consider other trajectory optimization problems.

Junkin, B. G.↗

Turbulent transport model of wind shear in thunderstorm gust fronts and warm fronts

A model of turbulent flow in the atmospheric boundary layer was used to simulate the low-level wind and turbulence profiles associated with both local thunderstorm gust fronts and synoptic-scale warm fronts. Dimensional analyses of both type fronts provided the physical scaling necessary to permit normalized simulations to represent fronts for any temperature jump. The sensitivity of the thunderstorm gust front to five different dimensionless parameters as well as a change from axisymmetric to planar geometry was examined. The sensitivity of the warm front to variations in the Rossby number was examined. Results of the simulations are discussed in terms of the conditions which lead to wind shears which are likely to be most hazardous for aircraft operations.

Lewellen, W. S.↗

Developments in testing airfoil techniques at University of Southampton

The evolution in Europe of the flexible walled test section, as applied to two dimensional testing at low and transonic speeds, is traced from its beginnings at NPL, London, in the early 1940's, and is shown to lead logically to the latest version now nearing completion at Southampton University. The principal changes that have taken place are improvements in the methods of choosing wall contours such that they rapidly follow appropriate streamlines, and reductions in the depth of test sections. The latest transonic test section presently under assembly at Southampton has, as its principal new feature, the facility for the automation of wall streamlining with the aid of an on-line computer. The versatility of the flexible walled test section is emphasized by reference to the simulation of alternative flows including cascade, steady pitching in an infinite flowfield, and ground effect. Finally, sources of error in streamlining are identified, with methods for their alleviation.

Goodyer, M. J.↗

Turbulent density fluctuations in a subsonic and transonic free jet using crossed-beam schlieren techniques

Scalar density fluctuations were measured nonintrusively in the shear layer of a 5.08-cm (2-in.) cold air jet using a crossed-beam schlieren method. Two statistics, covariance and three-dimensional spectrum function, were estimated for an exit Mach number range of 0.3 to 0.97. The density fluctuation intensity, integral scale, and eddy convection speed were calculated and compared to available data where possible. Spectra were found to change significantly in shape becoming less peaked between 3 and 9 jet diameters downstream from the orifice, but they consistently exhibited a -5/3 power law decay at 3, 6, and 9 diameters for frequencies above the peak.

Martin, R. A.↗

PAN and the NOx budget of the troposphere

The present investigation has the objective to examine the interaction of NOx with the nonmethane hydrocarbons (NMHCs) photochemistry. Attention is given to the influence of temperature, transport, and hydrocarbon radical reactions on the profiles of peroxyacylnitrates (PANs) and NO2. A lumped NMHC chemical reaction scheme was used in a one-dimensional photochemical model of the global troposphere. Model calculations were performed with various temperature profiles and the corresponding solar zenith angles to examine seasonal variations in the profiles of PAN and NOx. A study of the effects of changing temperature and solar zenith angle on the profiles of PAN and NOx showed that the amount of NO2 tied up in PAN increased as temperature decreased.

Brewer, D. A.↗

The dynamics of the Venus ionosphere. I - A simulation of the solar wind compression of the upper dayside ionosphere

One of the most exciting discoveries by the Pioneer Venus mission is the extreme variability in the structure of the Venus atmosphere. The solar wind plays a major, although as yet not well-defined, role in the dynamics of the ionosphere. An investigation is being conducted regarding the response of the dayside Venus ionosphere to changing solar wind conditions, in particular to the varying solar wind dynamic pressure. In the present study the dynamics of the upper (h equal to or greater than 200 km) ionosphere are simulated numerically using a one-dimensional, spherically symmetric, Lagrangian hydrodynamic code developed by Stein and Schwartz (1972). The ionosphere is assumed to be unmagnetized and is represented with a two-fluid model. The initial ionosphere is chosen to be in pressure equilibrium with the solar wind at the ionopause. It is shown how some of the time-dependent features of the Venus ionosphere may be simulated with the considered model.

Wolff, R. S.↗

Response of earth's atmosphere to increases in solar flux and implications for loss of water from Venus

A one-dimensional radiative-convective model is used to compute temperature and water vapor profiles as functions of solar flux for an earthlike atmosphere. The troposphere is assumed to be fully saturated, with a moist adiabatic lapse rate, and changes in cloudiness are neglected. Predicted surface temperatures increase monotonically from -1 to 111 C as the solar flux is increased from 0.81 to 1.45 times its present value. The results imply that the surface temperature of a primitive water-rich Venus should have been at least 80-100 C and may have been much higher. Water vapor should have been a major atmospheric constituent at all altitudes, leading to the rapid hydrodynamic escape of hydrogen. The oxygen left behind by this process was presumably consumed by reactions with reduced minerals in the crust.

Kasting, J. F.↗

Coronal extension of flaring region magnetic fields inferred from high-resolution microwave and type III burst observations

Observations of three solar radio bursts, obtained with the Very Large Array of the National Radio Astronomy Observatory at 6 cm wavelength, have been combined with meter observations from the Mark III Nancay Radioheliograph. There is a good correlation between solar activity observed at the two wavelength domains. A small change by about 10 sec in the centimetric burst location corresponds to a large change, by about 0.5 solar radius, in the related metric type III burst location. This indicates discrete injection/acceleration regions and the presence of very divergent magnetic fields. The bursts come from two distinct active regions. With two-dimensional spatial resolution, it is shown that, in this sample, each active region possesses a coronal extension that is separated from that of the neighboring active region.

Lantos, P.↗

Static and dynamic pressure measurements on a NACA 0012 airfoil in the Ames High Reynolds Number Facility

The supercritical flows at high subsonic speeds over a NACA 0012 airfoil were studied to acquire aerodynamic data suitable for evaluating numerical-flow codes. The measurements consisted primarily of static and dynamic pressures on the airfoil and test-channel walls. Shadowgraphs were also taken of the flow field near the airfoil. The tests were performed at free-stream Mach numbers from approximately 0.7 to 0.8, at angles of attack sufficient to include the onset of buffet, and at Reynolds numbers from 1 million to 14 million. A test action was designed specifically to obtain two-dimensional airfoil data with a minimum of wall interference effects. Boundary-layer suction panels were used to minimize sidewall interference effects. Flexible upper and lower walls allow test-channel area-ruling to nullify Mach number changes induced by the mass removal, to correct for longitudinal boundary-layer growth, and to provide contouring compatible with the streamlines of the model in free air.

Mcdevitt, J. B.↗

Two dimensional blade-vortex interaction flow visualization study

Blade-vortex interaction occurs when a rotor blade encounters the tip vortex from a previous rotor blade. To obtain details of the close encounter process, the results from a flow visualization study of an airfoil representing a rotor blade in the wake of an oscillating airfoil serving as a vortex generator are described. A distinguishing feature of this study is that the vortex filament is oriented parallel to the blade span, orthogonal to the test section free stream velocity. This orientation simulates the case of two-dimensional blade-vortex interaction, which is known to produce the most impulsive and most intensive BVI noise. Photographic data are examined to deduce qualitative and quantitative details of the close encounter interaction process with emphasis on structural changes in the vortex filament and its trajectory.

Booth, E. R., Jr.↗

Ozone-temperature relationships in the stratosphere

Utilizing independent estimates of ozone and temperature fields from the SBUV (Nimbus 7) and NOAA operational satellites, respectively, for the period 1978-1981, the coefficient of variation between the two parameters is determined. This coefficient is defined as A = Delta-O3 x (T)/Delta T x (O3) wehre Delta is an incremental change in either temperature or ozone and the bracket is a mean state. In practice, A is determined on a daily basis by regression of ozone mixing ratio versus temperature around a latitude circle during the winter season and the bracket value is the daily zonal average. This has the advantage of keeping the solar zenith angle fixed for a daily value while allowing it to change during the season. This is done at 30, 10, 5, 2, and 1 mb from 20 deg to 60 deg latitude in both hemispheres. The results are summarized and compared with those determined from a one-dimensional photochemical model applied to different latitudes.

Miller, A. J.↗

Active region coronal loops - Structural and variability

X-ray images of a pair of active region loops are studied which show significant, short time-scale variability in the line fluxes of O VIII, Ne IX, and Mg XI and in the 3.5-11.5 keV soft X-ray bands. Vector magnetograms and high-resolution UV images were used to model the three-dimensional characteristics of the loops. X-ray light curves were generated spanning four consecutive orbits for both loops individually, and light curves of the loop tops and brightest points were also generated. The largest variations involve flux changes of up to several hundred percent on time scales of 10 minutes. No significant H-alpha flare activity is reported, and loop temperatures remain in the four to six million K range. The decay phases of the light curves indicate radiative cooling, inhibition of conduction, and some type of 'continued heating' due to ongoing, underlying activity at the microflare level.

Haisch, Bernhard M.↗

Engineering calculations of three-dimensional inviscid hypersonic flow fields

An approximate solution technique has been developed for three-dimensional, inviscid, hypersonic flows. The method uses Maslen's explicit pressure equation and the assumption of approximate stream surfaces in the shock layer. This approximation represents a simplification of Maslen's asymmetric method. The solution procedure involves iteratively changing the shock shape in the subsonic-transonic region until the correct body shape is obtained. Beyond this region, the shock surface is determined by using a marching procedure. Results are presented herein for a paraboloid and elliptic cone at angle of attack. Calculated surface pressure distributions, shock shapes, and property profiles are compared with experimental data and finite-difference solutions of the Euler equations. Comparisons of the results of the present method with experimental data and detailed predictions are very good. Since the present method provides a very rapid computational procedure, it can be used for parametric or preliminary design applications. One useful application would be to incorporate a heating procedure for aerothermal studies.

Riley, Christopher J.↗

A comparison of artificial compressibility and fractional step methods for incompressible flow computations

We have applied and compared the efficiency and accuracy of two commonly used numerical methods for the solution of Navier-Stokes equations. The artificial compressibility method augments the continuity equation with a transient pressure term and allows one to solve the modified equations as a coupled system. Due to its implicit nature, one can have the luxury of taking a large temporal integration step at the expense of higher memory requirement and larger operation counts per step. Meanwhile, the fractional step method splits the Navier-Stokes equations into a sequence of differential operators and integrates them in multiple steps. The memory requirement and operation count per time step are low, however, the restriction on the size of time marching step is more severe. To explore the strengths and weaknesses of these two methods, we used them for the computation of a two-dimensional driven cavity flow with Reynolds number of 100 and 1000, respectively. Three grid sizes, 41 x 41, 81 x 81, and 161 x 161 were used. The computations were considered after the L2-norm of the change of the dependent variables in two consecutive time steps has fallen below 10(exp -5).

Chan, Daniel C.↗

Acousto-optic infrared spectral imager for Pluto fast flyby

Acousto-optic tunable filters (AOTF's) enable the design of compact, two-dimensional imaging spectrometers with high spectral and spatial resolution and with no moving parts. Tellurium dioxide AOTF's operate from about 400 nm to nearly 5 microns, and a single device will tune continuously over one octave by changing the RF acoustic frequency applied to the device. An infrared (1.2-2.5 micron) Acousto-Optic Imaging Spectrometer (AImS) was designed that closely conforms to the surface composition mapping objectives of the Pluto Fast Flyby. It features a 75-cm focal length telescope, infrared AOTF, and 256 x 256 NICMOS-3 focal plane array for acquiring narrowband images with a spectral resolving power (lambda/delta(lambda)) exceeding 250. We summarize the instrument design features and its expected performance at the Pluto-Charon encounter.

Glenar, D. A.↗

A study of the effects of macrosegregation and buoyancy-driven flow in binary mixture solidification

A generalized anisotropic porous medium approach is developed for modelling the flow, heat and mass transport processes during binary mixture solidification. Transient predictions are obtained using FEM, coupled with an implicit time-marching scheme, for solidification inside a two-dimensional rectangular enclosure. A parametric study focusing attention on the effects of solutal buoyancy and thermal buoyancy is presented. It is observed that three parameters, namely the thermal Rayleigh number, the solutal Rayleigh number, and the relative density change parameter, significantly alter the flow fields in the liquid and the mushy regions. Depending upon the nature of these flow fields, the solute enrichment caused by macrosegregation may occur in the top or the bottom region of the enclosure.

Sinha, S. K.↗