Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Long wavelength radar for geological analysis in vegetated terrain

In contrast to shorter wavelength radars, the range of returns from vegetated surfaces is appreciably less at L-band frequencies. However, the evaluation of differences in image quality due to changes in operational frequency is hindered by several system dissimilarities. In particular, a comparison of the Ka, X- and L-band radar imagery is difficult because of differences in 'effective' resolution. Though the physical resolution of these systems may be somewhat comparable, the inherent averaging of the real aperture systems (X-and Ka-) provides an apparent wider range of gray tones. This effect is related to the fact that at a scale where the resolution cell is discernable, the coherent scintillation of 'speckle' of the synthetic aperture L-band system masks tonal variations. This mismatch of effective resolution impedes detection of small changes in gray tone and makes subtle boundary changes less distinct.

Macdonald, H. C.↗
NASA NTRS1996

Steering of Frequency Standards by the Use of Linear Quadratic Gaussian Control Theory

Linear quadratic Gaussian control is a technique that uses Kalman filtering to estimate a state vector used for input into a control calculation. A control correction is calculated by minimizing a quadratic cost function that is dependent on both the state vector and the control amount. Different penalties, chosen by the designer, are assessed by the controller as the state vector and control amount vary from given optimal values. With this feature controllers can be designed to force the phase and frequency differences between two standards to zero either more or less aggressively depending on the application. Data will be used to show how using different parameters in the cost function analysis affects the steering and the stability of the frequency standards.

Koppang, Paul↗
NASA NTRS1967

Computer program for network synthesis by frequency response fit

Computer program synthesizes a passive network by minimizing the difference in desired and actual frequency response. The program solves for the critical points of the error function /weighted least squares fit between calculated and desired frequency response/ by the multivariable Newton-Raphson method with components constrained to an admissible region.

Green, S.↗
DOE OSTI2023

Modeling of standing wave RF cavities for tracking through multi-pass energy recovery linac

Short bunches, high current and multiple linac pass are all characteristics of Energy Recovery Linacs (ERLs), which may result in collective effects. They in turn, may affect the beam, degrading its quality, or even yield to instabilities causing a beam loss. To study and mitigate these effects one needs a numerical simulation code, that can take into account both the collective effects, as well as, particular ERL features, such as a multi-turn design that does not reach a steady state or the multiple passages of the beam through Radio-Frequency (RF) cavities at different energies. CODAL [1], a code developed by SOLEIL in collaboration with IJCLab, enables such studies. It is a 6 dimensional (6D) tracking code applying 'kicks' based on the integration of the local Hamiltonian for each element of the lattice. It is also capable of simulating space charge, wakefields and coherent synchrotron radiation. However, to correctly take into account the ERL dynamics, an upgrade had to be made to include the effect of a standing wave RF cavity in 6D. In this paper, we will concentrate on the implementation and benchmarking (with DESY’s tracking code ASTRA [2]) of both the longitudinal and the transverse models (by J.B. Rosenzweig and L. Serafini [3]), which we use to carry out tracking of fully analytical 6D RF cavity.

Bogacz, A.↗
NASA NTRS2014

On the Existence of Subharmonic Screech in Choked Circular Jets from a Sharp-Edged Orifice

Experiments are performed in choked circular hot and cold nitrogen jets issuing from a 2.44 cm diameter sharp-edged orifice at a fully expanded jet Mach number of 1.85 in an effort to investigate the character of screech phenomenon. The stagnation temperature of the cold and the hot jets are 299 K and 319 K respectively. The axial distribution of the centerline Mach number was obtained with a pitot tube, while the screech data (frequency and amplitude) at different axial and radial stations were measured with the aid of microphones. The fundamental screech frequency of the hot jet is slightly increased relative to that of the cold jet. It is concluded that temperature effects on the screech amplitude are manifested with regard to the fundamental and the subharmonic even at relatively small temperature range considered.

Circular Jets↗
NASA NTRS2006

Stabilizing Microwave Frequency of a Photonic Oscillator

A scheme for stabilizing the frequency of a microwave signal is proposed that exploits the operational characteristics of a coupled optoelectronic oscillator (COEO) and related optoelectronic equipment. An essential element in the scheme is a fiber mode-locked laser (MLL), the optical frequency of which is locked to an atomic transition. In this scheme, the optical frequency stability of the mode-locked laser is transferred to that of the microwave in the same device. Relative to prior schemes for using wideband optical frequency comb to stabilize microwave signals, this scheme is simpler and lends itself more readily to implementation in relatively compact, rugged equipment. The anticipated development of small, low-power, lightweight, highly stable microwave oscillators based on this scheme would afford great benefits in communication, navigation, metrology, and fundamental sciences. COEOs of various designs, at various stages of development, in some cases called by different names, have been described in a number of prior NASA Tech Briefs articles. A COEO is an optoelectronic apparatus that generates both short (picosecond) optical pulses and a steady microwave signal having an ultrahigh degree of spectral purity. The term "coupled optoelectronic" in the full name of such an apparatus signifies that its optical and electronic oscillations are coupled to each other in a single device. The present frequency-stabilization scheme is best described indirectly by describing the laboratory apparatus used to demonstrate it. The apparatus (see figure) includes a COEO that generates a comb-like optical spectrum, the various frequency components of which interfere, producing short optical pulses. This spectrum is centered at a nominal wavelength of 1,560 nm. The spectrum separation of this comb is about 10 GHz, as determined primarily by the length of an optical loop and the bandpass filter in the microwave feedback loop. The optical loop serves as microwave resonator having a very high value of the resonance quality factor (Q). The optical frequency of MLL is then stabilized by locking it to an atomic transition as described below. The COEO contains a tunable 1-nm band-pass optical filter and a piezoelectric-transducer (PZT) drum over which a stretch of fiber is wound. The 1-nm-wide pass band of the filter provides coarse tuning to overlap the frequency comb with the atomic transition frequency. Controlled stretching of the fiber by means of the PZT drum can be used in conjunction with temperature control for locking the laser frequency. To reference to an atomic resonance at 780 nm in this demonstration setup, the optical output of the COEO at 1,560 nm is fed through an erbium-doped-fiber amplifier (EDFA) to a frequency doubler in the form of a periodically poled lithium niobate (PPLN) crystal. The frequency-doubled output is combined with the output of a separate frequency-stabilized diode laser at a photodetector. As described thus far, the two 780-nm laser subsystems are nominally independent of each other and can, therefore, operate at different frequencies. Hence, at the photodetector, the two laser beams interfere, so that the output of the photodetector includes a beat note (a component at the difference between the two laser frequencies).

Maleki, Lute↗
NASA NTRS1993

An Agile Beam Transmit Array Using Coupled Oscillator Phase Control

A few years ago York and colleagues suggested that injection locking of voltage controlled oscillators could be used to implement beam steering in a phased array [I]. The scheme makes use of the fact that when an oscillator is injection locked to an external signal, the phase difference between the output of the oscillator and the injection signal is governed by the difference between the injection frequency and the free running frequency of the oscillator (the frequency to which the oscillator is tuned). Thus, if voltage controlled oscillators (VCOs) are used, this phase difference is controlled by an applied voltage. Now, if a set of such oscillators are coupled to nearest neighbors, they can be made to mutually injection lock and oscillate as an ensemble. If they are all tuned to the same frequency, they will all oscillate in phase. Thus, if the outputs are connected to radiating elements forming a linear array, the antenna will radiate normal to the line of elements. Scanning is accomplished by antisymmetrically detuning the end oscillators in the array by application of a pair of appropriate voltages to their tuning ports. This results in a linear phase progression across the array which is just the phasing required to scan the beam. The scan angle is determined by the degree of detuning. We have constructed a seven element one dimensional agile beam array at S-band based on the above principle. Although, a few such arrays have been built in the past, this array possesses two unique features. First, the VCO MMICs have buffer amplifiers which isolate the output from the tuning circuit, and second, the oscillators are weakly coupled to each other at their resonant circuits rather than their outputs. This results in a convenient isolation between the oscillator array design and the radiating aperture design. An important parameter in the design is the so called coupling phase which determines the phase shift of the signals passing from one oscillator to its neighbors. Using this array, we have been able to verify the theoretical predictions concerning the effect of this phase on both the locking range and ensemble frequency of the array. However, the scan range achieved fell somewhat short of the theoretical value because of the amplitude variation of the oscillator outputs with tuning.

Pogorzelski, Ronald S.↗
NASA NTRS1987

Four-mode squeezing

The four-wave-mixing interactions produced by pumping at two well-separated frequencies can couple four different radiation modes to generate a new kind of squeezed state of light. A dual-frequency homodyne detection scheme is described and is used to observe this type of nonclassical correlation. Initial experimental results in an optical fiber show a noise level 20 percent below the vacuum noise level for the output of the dual-frequency detector, even though the noise at each individual detector remains above the vacuum level.

Schumaker, B. L.↗
DOE OSTI2021

Tampering detection and location identification of digital audio recordings

Systems and methods for detecting a tampering and identifying a location of a digital recording are provided. A frequency sequence and a phase angle sequence may be extracted from the digital recording. A portion of the frequency sequence may be matched to one of a plurality of reference frequency sequences, and a portion of the phase angle sequence may be matched to one of a plurality of reference phase angle sequences. Tampering of the digital recording may be detected when the frequency and phase sequences differ from the matched reference sequences. Moreover, a noise sequence may be extracted from the extracted frequency sequence. A location of the digital recording may be identified by matching the noise sequence to one of a plurality of noise sequences of the plurality of reference frequency sequences.

Chai, Jidong↗
DOE OSTI2022

The Influence of Temperature Inversion on the Vertical Distribution of Aerosols

Temperature inversion plays an important role in the accumulation and diffusion of aerosols. In this study, the relationship between temperature inversion and the vertical distribution of aerosols is investigated based on Raman lidar observations taken from January 2010 to September 2015 at the Atmospheric Radiation Measurement site in the Southern Great Plains, USA. First, the diurnal and seasonal variations of the surface-based inversion (SBI) and elevated temperature inversion (EI) are investigated. The results indicate that the occurrence frequency of SBI and EI have different seasonal trends. SBI has the highest frequency in summer, while EI has the highest frequency in winter. The diurnal variation of SBI is obvious, with a higher frequency in nighttime and a lower frequency in daytime. The inversion intensity (ΔT) and inversion depth (ΔZ) of SBI and EI have consistent diurnal and seasonal trends. The effects of SBI and EI on the vertical distribution of aerosols are then analyzed. The mean aerosol optical depth (AOD) below the SBI height shows a clear seasonal variation, which is consistent with the seasonal trends of ΔT and ΔZ. This phenomenon also occurs on the AOD below EI top height. The sensitivity analysis shows that the mean AOD below SBI height or EI top height increases with an increase of the ΔT and ΔZ of SBI (EI). It indicates that ΔT and ΔZ are the key factors affecting the vertical distribution of aerosols. In addition, the variation of AOD below and above EI top height is opposite to that of AOD below and above EI bottom height under different ΔT and ΔZ conditions. The correlation coefficients between ΔT (ΔZ) of EI with AOD in EI were 0.62 (0.65). These results indicate that the space between EI bottom height and EI top height can store aerosols. The larger the ΔZ of EI, the more aerosols are stored. These findings contribute to our understanding of the effect of temperature inversion on the vertical distribution of aerosols.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Measurement and Theory of Gas-Phase Ion Mobility Shifts Resulting from Isotopomer Mass Distribution Changes

The unanticipated discovery of recent ultra-high-resolution ion mobility spectrometry (IMS) measurements revealing that isotopomers-compounds that differ only in the isotopic substitution sites-can be separated has raised questions as to the physical basis for their separation. A study comparing IMS separations for two isotopomer sets in conjunction with theory and simulations accounting for ion rotational effects provides the first-ever prediction of rotation-mediated shifts. The simulations produce observable mobility shifts due to differences in gas–ion collision frequency and translational-to-rotational energy transfer. These differences can be attributed to distinct changes in the moment of inertia and center of mass between isotopomers. The simulations are in broad agreement with the observed experiments and consistent with relative mobility differences between isotopomers. These results provide a basis for refining IMS theory and a new foundation to obtain additional structural insights through IMS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

A Meteorological Model's Dependence on Radiation Update Frequency

Numerical weather models are used to simulate circulations in the atmosphere including clouds and precipitation by applying a set of mathematical equations over a three-dimensional grid. The grid is composed of discrete points at which the meteorological variables are defined. As computing power continues to rise these models are being used at finer grid spacing, but they must still cover a wide range of scales. Some of the physics that must be accounted for in the model cannot be explicitly resolved, and their effects, therefore, must be estimated or "parameterized". Some of these parameterizations are computationally expensive. To alleviate the problem, they are not always updated at the time resolution of the model with the assumption being that the impact will be small. In this study, a coupled land-atmosphere model is used to assess the impact of less frequent updates of the computationally expensive radiation physics for a case on June 6, 2002, that occurred during a field experiment over the central plains known as International H20 Project (IHOP). The model was tested using both the original conditions, which were dry, and with modified conditions wherein moisture was added to the lower part of the atmosphere to produce clouds and precipitation (i.e., a wet case). For each of the conditions (i.e., dry and wet), four set of experiments were conducted wherein the model was run for a period of 24 hours and the radiation fields (including both incoming solar and outgoing longwave) were updated every 1, 3, 10, and 100 time steps. Statistical tests indicated that average quantities of surface variables for both the dry and wet cases were the same for the various update frequencies. However, spatially the results could be quite different especially in the wet case after it began to rain. The near-surface wind field was found to be different most of the time even for the dry case. In the wet case, rain intensities and average vertical profiles of heating associated with cloudy areas were found to differ for the various radiation update frequencies. The latter implies that the mean state of the model could be different as a result of not updating the radiation fields every time step and has important implications for longer term climate studies

Eastman, Joseph L.↗
NASA NTRS1975

Infrared emission spectra of elastohydrodynamic contacts

A small diamond disk mounted as a window in a steel plate was covered with test fluid, and a weighted steel ball was rotated over the window so as to form a sliding elastohydrodynamic (EHD) contact region. Some of the radiant energy generated in this region, both in the fluid and at the boundaries, passed through the window into an infrared interferometer, giving rise to an emission spectrum. This spectrum could be separated into contributions from the fluid and from the ball surface, making it possible, by appropriate calibrations, to estimate their temperatures separately under operating conditions. Moreover, the shape of the discrete spectral bands of the fluid permitted some inferences on its state. Two fluids were studied under identical mechanical conditions, a polyester and a naphthenic oil, each containing an equal amount of polymethylstyrene as a spectral indicator. Differences of band intensity, band width, and frequency could, therefore, be attributed to differences in the behavior of the base fluid.

Lauer, J. L.↗
NASA NTRS2023

A Framework for Evaluating Distributed Electric Propulsion on the SUSAN Electrofan Aircraft

This work presents a framework for evaluating models and algorithms for Distributed Electric Propulsion (DEP) on the SUSAN Electrofan Aircraft. Throughout the development of the SUSAN aircraft, the performance of various configurations of the aircraft will need to be analyzed. However, the static behavior alone is not sufficient to describe the performance of these configurations. Therefore, simulation with fully integrated subsystem models is required. The proposed framework considers the vehicle aerodynamic, propulsion, and control subsystems. The presented framework automatically generates control laws for any vehicle configuration in response to changes in these subsystems. To compare these different vehicle configurations, various time and frequency domain performance metrics are compared. Three different system modifications are used as cases to evaluate this framework. The first modification integrates the propulsion control system with the flight controller to enable differential thrust without stalling the main engine. This evaluation case is used to validate the framework for aircraft configurations with coupled subsystems. The second modification compares the effect of the vertical tail size on open and closed loop performance. This evaluation case is used to validate the framework for controlling different configurations and tuning towards comparable closed loop performance despite changes to the aircraft's aerodynamic model. The third modification implements two different control allocation schemes. This evaluation case demonstrates the framework's ability to evaluate allocation modifications needed to take advantage of DEP. The first evaluation case is used to show that controller integration enables differential thrust, improving realized wingfan bandwidth by up to 40\% in simulation. The second evaluation case demonstrates that the framework can stabilize the reduced tail size aircraft with closed loop control. The third evaluation case demonstrates that a pseudoinverse control allocation scheme improves lateral velocity settling time by approximately 17~seconds over a symmetric-thrust allocation. These cases show that the framework is useful for evaluating the performance of integrated system designs, enabling analyses of new models and algorithms for the SUSAN distributed electric propulsion vehicle.

Nicholas C Ogden↗
DOE OSTI2020

Examination of Global Midlatitude Atmospheric River Lifecycles Using an Object-Oriented Methodology

Tracking atmospheric rivers (ARs) across their lifecycles is a field of recent interest with a multitude of emerging methodologies. The CONNected-objECT (CONNECT) algorithm is adapted for the tracking of global midlatitude AR lifecycles and associated precipitation by implementing a seeded region growing segmentation algorithm, creating the AR-CONNECT algorithm. To facilitate the permissiveness of the methodology, AR-CONNECT is without hard-coded geometric criteria yet is still shown to extract synoptic-scale elongated objects >99.99% of the time. One of the consequences of the methodology is the ability to occasionally track atmospheric water vapor anomalies before evolving into AR geometries, effectively tracking AR genesis further back than other studies. With the aid of subdaily satellite-derived rain data, we investigate the climatology, trends, and patterns of AR lifecycles from 1983–2016 and compare with other AR tracking studies. We find that AR frequency, genesis, and terminus locations are in generally good agreement with other AR tracking methodologies, though with key differences, and that AR frequencies in each hemisphere are determined by the number of AR hotspots. Furthermore, we uncover evidence that certain AR characteristics, such as frequency, areal extent, and duration, show evidence of increasing trends. Midlatitude precipitation uncovered by AR-CONNECT shows contributions up to 50% over land and 65% over the ocean. Trend analysis of AR precipitation shows an increase in precipitation associated with ARs propagated by the Southern Jet Stream and ARs that traverse over the Sahara Desert, among others, but is determined not to be a driver of changes in global precipitation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

Mercury Trapped Ion Frequency Standard for Ultra-Stable Reference Applications

An atomic clock including an ion trap assembly, a C-field coil positioned for generating a first magnetic field in the interrogation region of the ion trap assembly, a compensation coil positioned for generating a second magnetic field in the interrogation region, wherein the combination of the first and second magnetic fields produces an ion number-dependent second order Zeeman shift (Zeeman shift) in the resonance frequency that is opposite in sign to an ion number-dependent second order Doppler shift (Doppler shift) in the resonance frequency, the C-field coil has a radius selected using data indicating how changes in the radius affect an ion-number-dependent shift in the resonance frequency, such that a difference in magnitude between the Doppler shift and the Zeeman shift is controlled or reduced, and the resonance frequency, including the adjustment by the Zeeman shift, is used to obtain the frequency standard.

Burt, Eric A.↗
DOE OSTI2022

Valve Regulated Lead Acid Battery Evaluation under Peak Shaving and Frequency Regulation Duty Cycles

This work highlights the performance metrics and the fundamental degradation mechanisms of lead-acid battery technology and maps these mechanisms to generic duty cycles for peak shaving and frequency regulation grid services. Four valve regulated lead acid batteries have been tested for two peak shaving cycles at different discharge rates and two frequency regulation duty cycles at different SOC ranges. Reference performance and pulse resistance tests are done periodically to evaluate battery degradation over the time. The results of the studies are expected to provide a valuable understanding of lead acid battery technology suitability for grid energy-storage applications.

25 ENERGY STORAGE↗