Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diameter distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Development of Next Generation Multiphase Pipe Flow Prediction Tools

The developments of fields in deep waters (5000 ft and more) is a common occurrence. It is inevitable that production systems will operate under multiphase flow conditions (simultaneous flow of gas-oil-and water possibly along with sand, hydrates, and waxes). Multiphase flow prediction tools are essential for every phase of the hydrocarbon recovery from design to operation. The recovery from deep-waters poses special challenges and requires accurate multiphase flow predictive tools for several applications including the design and diagnostics of the production systems, separation of phases in horizontal wells, and multiphase separation (topside, seabed or bottom-hole). It is very crucial to any multiphase separation technique that is employed either at topside, seabed or bottom-hole to know inlet conditions such as the flow rates, flow patterns, and volume fractions of gas, oil and water coming into the separation devices. The overall objective was to develop a unified model for gas-oil-water three-phase flow in wells, flow lines, and pipelines to predict the flow characteristics such as flow patterns, phase distributions, and pressure gradient encountered during petroleum production at different flow conditions (pipe diameter and inclination, fluid properties and flow rates). The project was conducted in two periods. In Period 1 (four years), gas-oil-water flow in pipes were investigated to understand the fundamental physical mechanisms describing the interaction between the gas-oil-water phases under flowing conditions, and a unified model was developed utilizing a novel modeling approach. A gas-oil-water pipe flow database including field and laboratory data was formed in Period 2 (one year). The database was utilized in model performance demonstration. Period 1 primarily consisted of the development of a unified model and software to predict the gas-oil-water flow, and experimental studies of the gas-oil-water project, including flow behavior description and closure relation development for different flow conditions. Modeling studies were performed in two parts, Technology Assessment and Model Development and Enhancement. The results of the Technology assessment study indicated that the performance of the current state of the art two-phase flow models was poor especially for three-phase pipeline flow when compared with the existing data. As part of the model development and enhancement study, a new unified model for gas-oil-water three-phase pipe flow was developed. The new model is based on the dynamics of slug flow, which shares transition boundaries with all the other flow patterns. The equations of slug flow are used not only to calculate the slug characteristics, but also to predict transitions from slug flow to other flow patterns. An experimental program including three-phase gas-oil-water horizontal flow and two-phase horizontal and inclined oil-water flow testing was conducted utilizing a Tulsa University Fluid Flow Projects Three-phase Flow Facility. The experimental results were incorporated into the unified model as they became available, and model results were used to better focus and tailor the experimental study. Finally, during the Period 2, a new three-phase databank has been developed using the data generated during this project and additional data available in the literature. The unified model to predict the gas-oil-water three phase flow characteristics was tested by comparing the prediction results with the data. The results showed good agreements.

02 PETROLEUM↗

Single Mode Air-Clad Single Crystal Sapphire Optical Fiber

The observation of single mode propagation in an air-clad single crystal sapphire optical fiber at wavelengths at and above 783 nm is presented for the first time. A high-temperature wet acid etching method was used to reduce the diameter of a 10 cm length of commercially-sourced sapphire fiber from 125 micrometers to 6.5 micrometers, and far-field imaging provided modal information at intervals as the fiber diameter decreased. Modal volume was shown to decrease with decreasing diameter, and single mode behavior was observed at the minimum diameter achieved. While weakly-guiding approximations are generally inaccurate for low modal volume optical fiber with high core-cladding refractive index disparity, consistency between these approximations and experimental results was observed when the effective numerical aperture was measured and substituted for the theoretical numerical aperture in weakly-guiding approximation calculations. With the demonstration of very low modal volume in sapphire at fiber diameters much larger than anticipated by legacy calculations, the resolution of sapphire fiber distributed sensors may be increased and other sensing schemes requiring very low modal volume, such as fiber Bragg gratings, may be realized in extreme environment applications.

36 MATERIALS SCIENCE↗

A remote sensing algorithm for vertically resolved cloud condensation nuclei number concentrations from airborne and spaceborne lidar observations

Cloud condensation nuclei (CCN) are mediators of aerosol–cloud interactions (ACIs), contributing to the largest uncertainties in the understandings of global climate change. We present a novel remote-sensing-based algorithm that quantifies the vertically resolved CCN number concentrations (N CCN ) using aerosol optical properties measured by a multiwavelength lidar. The algorithm considers five distinct aerosol subtypes with bimodal size distributions. The inversion used the lookup tables developed in this study, based on the observations from the Aerosol Robotic Network, to efficiently retrieve optimal particle size distributions from lidar measurements. The method derives dry aerosol optical properties by implementing hygroscopic enhancement factors in lidar measurements. The retrieved optically equivalent particle size distributions and aerosol-type-dependent particle composition are utilized to calculate critical diameters using κ-Köhler theory and N CCN at six supersaturations ranging from 0.07 % to 1.0 %. Sensitivity analyses indicate that uncertainties in extinction coefficients and relative humidity greatly influence the retrieval error in N CCN . The potential of this algorithm is further evaluated by retrieving N CCN using airborne lidar from the NASA ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign and is validated against simultaneous measurements from the CCN counter. The independent validation with robust correlation demonstrates promising results. Furthermore, the N CCN has been retrieved for the first time using a proposed algorithm from spaceborne lidar – Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) – measurements. The application of this new capability demonstrates the potential for constructing a 3D CCN climatology at a global scale, which helps to better quantify ACI effects and thus reduce the uncertainty in aerosol climate forcing.

54 ENVIRONMENTAL SCIENCES↗

Experimental study of the effectiveness of cylindrical plume simulators for predicting jet-on boattail drag at Mach numbers up to 1.30

An investigation has been conducted in a 16-foot transonic tunnel to determine the effectiveness of utilizing solid circular cylinders to simulate the jet exhaust plume for a series of eight nacelle-mounted isolated circular-arc afterbodies. This investigation was conducted at Mach numbers from 0.40 to 1.30 at an angle of attack of 0. Plume simulators with simulator diameter to nozzle-exit diameter ratios of 0.82, 0.88, 0.98, and 1.00 were investigated. Results of this investigation indicate that use of one of the larger diameter simulators at all Mach numbers would generally result in pressure-coefficient distributions and drag coefficients useful for preliminary design work.

Reubush, D. E.↗

On the constancy of the lunar cratering flux over the past 3.3 billion yr

Utilizing a method that minimizes random fluctuations in sampling crater populations, it can be shown that the ejecta deposit of Tycho, the floor of Copernicus, and the region surrounding the Apollo 12 landing site have incremental crater size-frequency distributions that can be expressed as log-log linear functions over the diameter range from 0.1 to 1 km. Slopes are indistinguishable for the three populations, probably indicating that the surfaces are dominated by primary craters. Treating the crater populations of Tycho, the floor of Copernicus, and Apollo 12 as primary crater populations contaminated, but not overwhelmed, with secondaries, allows an attempt at calibration of the post-heavy bombardment cratering flux. Using the age of Tycho as 109 m.y., Copernicus as 800 m.y., and Apollo 12 as 3.26 billion yr, there is no basis for assuming that the flux has changed over the past 3.3 billion yr. This result can be used for dating intermediate aged surfaces by crater density.

Guinness, E. A.↗

Relative ages of flow units in Mare Imbrium and Sinus Iridum

A method for determining relative ages from low-resolution Lunar Orbiter photographs of lunar plains has been developed and applied to Mare Imbrium and Sinus Iridum. The method is an extension of previous ones and uses the shapes of craters and a small-impact erosion model to estimate the net accumulated impact flux. The net impact flux that has accumulated on a surface of uniform age is a measure of relative age of that surface and can be estimated by the largest diameters of craters that have been degraded by the net impact flux. Frequency distributions or relative ages indicate that there are four major units present in Mare Imbrium and Sinus Iridum. The older mare units are generally found along the edge of the basin and the younger units in the center. A similar distribution of ages of units in Mare Serenitatis shows the two basins have had similar filling histories. Filling histories for other circular basins may be similar to these two.

Boyce, J. M.↗

Martian fluidized crater morphology - Variations with crater size, latitude, altitude, and target material

The paper investigates the influence of crater latitude, target material, and elevation on the morphology of the ejecta facies and crater interiors as a function of crater diameter. It is shown that only pancake craters exhibit latitudinal variation in their distribution. It is also shown that several crater types are associated with specific target materials: radial textured craters are found primarily on Tharsis and Elysium lavas, and pancake craters are found on fractured terrain, old lavas, and channel materials. Craters formed on recent lavas more frequently possess secondary craters, central peaks, and terraces than primary craters found on other geological units. The maximum radial extent of fluidized ejecta is demonstrated to be a function of crater altitude and latitude.

Mouginis-Mark, P.↗

Role of substrate quality on IC performance and yields

The development of silicon and gallium arsenide crystal growth for the production of large diameter substrates are discussed. Large area substrates of significantly improved compositional purity, dopant distribution and structural perfection on a microscopic as well as macroscopic scale are important requirements. The exploratory use of magnetic fields to suppress convection effects in Czochralski crystal growth is addressed. The growth of large crystals in space appears impractical at present however the efforts to improve substrate quality could benefit from the experiences gained in smaller scale growth experiments conducted in the zero gravity environment of space.

Thomas, R. N.↗

Cratering time scales for the Galilean satellites

An attempt is made to estimate the present cratering rate for each Galilean satellite within the correct order of magnitude and to extend the cratering rates back into the geologic past on the basis of evidence from the earth-moon system. For collisions with long and short period comets, the magnitudes and size distributions of the comet nuclei, the distribution of their perihelion distances, and the completeness of discovery are addressed. The diameters and masses of cometary nuclei are assessed, as are crater diameters and cratering rates. The dynamical relations between long period and short period comets are discussed, and the population of Jupiter-crossing asteroids is assessed. Estimated present cratering rates on the Galilean satellites are compared and variations of cratering rate with time are considered. Finally, the consistency of derived cratering time scales with the cratering record of the icy Galilean satellites is discussed.

Shoemaker, E. M.↗

Calculating the obscuration ratio due to particle surface contamination

A useful method for the calculation of the obscuration ratio due to particle surface contamination is described. Equations are developed for calculating the obscuration ratio for spherical particles (with diameters greater than 1 micron) and fibers for surfaces where the particle size distribution is either known to be or assumed to be of the form of a MIL-STD-1246A distribution. A simple approximation to the obscuration ratio discrete data is then derived, where the contribution from a single size interval only is treated. This derivation obtains tighter bounds on the approximation error than are provided by the usual direct approach.

Barengoltz, Jack↗

Marine stratocumulus cloud fields off the coast of southern California observed using Landsat imagery. I - Structural characteristics

The structural characteristics of stratocumulus cloud fields off the coast of southern California are investigated using Landsat Multispectral Scanner imagery. Twelve scenes in this area are examined along with three other stratocumulus scenes near San Francisco, over central Oregon, and in the Gulf of Mexico. Results from this initial study of stratocumulus clouds indicate that cloud-background threshold selection techniques based upon edge detection gradient assumptions are not appropriate for cloud segmentation and classification algorithms, cloud size distributions obey a power law, and cell horizontal aspect ratio increases with cell diameter. It was also found that stratocumulus clouds are bifractal in nature with fractal dimension of d of about 1.2 for cells with diameter D smaller than 0.5 km and d of about 1.5 for cells with D greater than 0.5 km; stratocumulus cloud fields appear to be homogeneous over regions of about 100 km x 100 km, a much smaller region than the 2.5-deg x 2.5-deg boxes to be used in the ISCCP regional averaging algorithms; and that structural properties of stratocumulus clouds observed off the coast of southern California are similar to those observed for stratocumulus clouds at three other locations.

Welch, R. M.↗

Unbound molecular complexes in M33

The HI content of the nearby spiral galaxy M33 (d approx. 0.8 Mpc) has been the subject of many detailed studies (most recently Deul and van der Hulst 1987), but similar data on the molecular gas component has been lacking. This galaxy is currently undergoing vigorous high-mass star formation, as evidenced by the many OB associations and HII regions, and so is expected to possess at least some molecular gas. Interferometric studies have detected molecular clouds similar to Galactic Giant Molecular Clouds (GMCs) (Boulanger et al. 1988; Wilson et al. 1988). Researchers have recently mapped the nuclear region of M33 in the CO J=1-0 line with a 12 m telescope (half power beam width 55 inches approx. 210 pc) out to a radius of 3.5 minutes in order to trace the detailed distribution of the molecular gas. The resulting map reveals six large complexes with diameters of 200 to 400 pc. Interferometer observations of these regions have resolved them into individual molecular clouds similar to Galactic GMCs (Wilson et al. 1988). The complexes shown are much larger than individual Galactic GMCs (Sanders, Scoville, and Solomon 1985), but are somewhat smaller on average than the large associations seen in the grand-design spiral galaxy M51 (Rand and Kulkarni 1989). If we extend the velocity-diameter relation observed for Galactic GMCs to these larger structures, the predicted velocity widths are a factor of 1.5 to 3 times greater than the observed full-width half-maximum velocities (13 to 29 km (s-1). The peak brightness temperatures are approx. 0.2 K, at least a factor of 10 lower than what is observed for Galactic GMCs. If these large structures are made up of objects similar to Galactic GMCs, the area filling factor of the small clouds is roughly 10 percent. These results suggest that these complexes are not very large GMCs, but rather are associations of many individual GMCs or GMCs embedded in a diffuse gas component.

Wilson, Christine D.↗

Cumulus cloud field morphology and spatial patterns derived from high spatial resolution Landsat imagery

Using high-spatial-resolution Landsat MSS imagery, the cumulus cloud morphology, cloud nearest-neighbor distributions, and cloud clumping scales were investigated. It is shown that the cloud-size distribution can be represented by a mixture of two power laws; clouds of diameters less than 1 km have power-law slope range of 1.4-2.3, while larger clouds have slopes from 2.1 to 4.75. The break in power-law slope occurs at the cloud size that makes the largest contribution to cloud cover. Results suggest that larger clouds grow at the expense of smaller clouds. It was also found that the cloud inhomogeneities have significant impact on radiative fluxes.

Sengupta, S. K.↗

Coefficients of discharge of fuel-injection nozzles for compression-ignition engines

This report presents the results of an investigation to determine the coefficients of discharge of nozzles with small, round orifices of the size used with high-speed compression-ignition engines. The injection pressures and chamber back pressures employed were comparable to those existing in compression-ignition engines during injection. The construction of the nozzles was varied to determine the effect of the nozzle design on the coefficient. Tests were also made with nozzles assembled in an automatic injection valve, both with a plain and with a helically grooved stem. It was found that a smooth passage before the orifice is requisite for high flow efficiency. A beveled leading edge before the orifice gave a higher coefficient of discharge than a rounded edge. The results with the nozzles assembled in an automatic injection valve having a plain stem duplicated those with the nozzles assembled at the end of a straight tube of constant diameter. Lower coefficients were obtained with the nozzles assembled in an injection valve having a helically grooved stem. When the coefficients of nozzles of any one geometrical shape were plotted against values of corresponding Reynold's numbers for the orifice diameters and rates of flow tested, it was found that experimental points were distributed along a single curve.

Gelalles, A G↗

Wind-tunnel Tests of Four Curtiss Propellers Embodying Different Blade Sections

Tests of four 10-foot propellers were made in the propeller-research tunnel for the Army Air Corps to check flight and static thrust test results made on several propellers embodying Clark Y and modified NACA 16-series sections. These propellers were identical as to diameter and activity factor and very closely identical in thickness ratio and pitch distribution. The blades embodied sections with both single- and double-cambered Clark Y, modified NACA 16-series, and a combination of Clark Y and modified NACA-16 airfoils. Tests covered a range of blade angles from 20 deg. to 70 deg., and were all made at tip speeds below 280 feet per second. Although these tests were not conclusive in themselves, owing to the conditions under which they were made, the results seem to check the flight and static tests as closely as would be expected.

AIRFOILS - CLARK Y - CHARACTERISTICS PROPELLER↗

Nanocomposite additives based on graphene sheets and silica nanofibers

A method for producing a composite polymeric article, an additive for a polymeric article, and a composite polymeric article are provided. The method generally includes providing a plurality of graphene nanoplatelets, providing a plurality of silica nanofibers, providing a polymeric material, and distributing the plurality of silica nanofibers and the plurality of graphene nanoplatelets within the polymeric material to achieve a composite article. The additive for a polymeric article includes a plurality of graphene nanoplatelets and a plurality of silica nanofibers. The composite polymeric article includes a plurality of graphene nanoplatelets, a plurality of silica nanofibers, and a polymeric matrix. The plurality of graphene nanoplatelets and the plurality of silica nanofibers are distributed within the polymeric matrix. The silica nanofibers have a mean cross sectional diameter of not more than 100 nm.

36 MATERIALS SCIENCE↗

Characterization and Remediation of the Hanford 618-10 Burial Ground Vertical Pipe Units - 17121

The 618-10 Burial Ground is approximately 148 m by 143 m (485 feet by 470 feet) and consists of 12 trenches and 94 Vertical Pipe Units (VPU's). It is located approximately 8.1 km (5 miles) north of Richland, Washington in the 600 Area of the Hanford Site. The 618-10 Burial Ground received low- to high-activity waste (e.g., fission products and some plutonium-contaminated waste). Most of the waste originated at the 300 Area laboratory facilities. Lower activity radioactive material and shielded drums were disposed in trenches, while laboratory wastes with higher levels of radiation were disposed in Vertical Pipe Units (VPUs). There are different variants of VPUs. Some VPUs are simply corrugated culverts or standard pipes, 36 cm (14 in.) diameter and 3.1 m to 4.6 m (10- to 15-ft) long, buried vertically. Some VPUs are carbon steel pipes 25 to 61 cm (10 to 24 in.) in diameter and up to 4.6 m (15 ft) in length. The final design of the VPUs is 56 cm (22-in) diameter, 4.4 m (14.4 ft) long waste receptacles constructed by welding five 208 L (55-gallon) bottomless drums together end-to-end and burying them vertically, separated by approximately 3.1 m (10 feet) on center in rows approximately 7.6 m (25 feet) apart. The 618-10 Burial Ground contains approximately 94 VPUs. Historical documents indicate that shielding materials (e.g., concrete or soil) may have been added to the VPUs to reduce dose rates over the openings, and that each VPU was backfilled with sand and capped with concrete at the end of its service life. Historical documents also indicate that the VPUs were covered with approximately 0.6 m (2-ft) of soil when they were closed, and an additional 0.6 m (2-ft) of topsoil was later added for surface stabilization. In general, the process for VPU remediation was as follows: - Installed four cone penetrometers (CPTs) around the exterior of each individual VPU and sent radiation detection probes down the interior of the CPTs to get initial radiation data in order to calculate the overall curie content and create maps showing the dose rate distribution throughout the VPU. - Removed the CPTs and installed a 122 cm (48-in) diameter, 1.3 cm (0.5-in) thick steel over-casing using a vibrating hammer suspended from a crane that encompassed the VPU with some surrounding soil. - Using a Bauer BG-30 drill rig with a specifically designed augur bit and a specially designed confinement system the auger process was used to stabilize and size reduce the contents. - Once the auger reached a depth of 8.5 m (28 feet) the BG-30 drill stem was separated and additional characterization was completed by sending a radiation probe down the center of the drill stem to gather radiological data. - Once auguring and characterization was completed the waste was removed using a specially designed extended clamshell retrieval bucket and placed into individual 2.7 m x 1.5 m x 1.2 m (9-ft x 5-ft x 4-ft) metal boxes. - After the waste was placed into the metal waste boxes a low strength grout was added and the grout and waste material was mixed using a large rake device attached to an excavator. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A technique for measuring in situ size distribution of aerosols

A multistage cascade impactor instrument employing piezoelectric crystals for real-time aerosol size distribution measurements is described in this paper. The instrument measures the aerosol mass concentration as a function of particle size in 10 size intervals ranging from 0.05 micrometers to 25 micrometers in diameter. The particles are then analyzed for elemental composition and morphology by means of scanning electron microscopy (SEM). Examples of particle size distributions in rocket motor exhaust plumes measured with the instrument are presented together with the elemental composition and morphology obtained by SEM.

Woods, D. C.↗