SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The conceptual design, performance projections, and materials development for the maypole (hoop/column) reflector concept are summarized. Factors influencing configuration choices are discussed along with quad aperture/feed characteristics and antenna requirements based on missions.
The Inertial Upper Stage (IUS) is a two-stage or three-stage booster used to transport spacecraft from the space shuttle orbit to synchronous orbit or on an interplanetary trajectory. The mechanisms which were designed specifically to perform the two-stage IUS required functions while contained within the cargo bay of the space shuttle during the boost phase and while in a low Earth orbit are discussed. The requirements, configuration, and operation of the mechanisms are described, with particular emphasis on the tilt actuator and the mechanism for decoupling the actuators during boost to eliminate redundant load paths.
Like upward-drawn window shades, solar blankets are unfurled to length of 89m, almost filling opening in 95.59-meter-square frame. When frame is completely assembled, solar blankets are pulled from canisters, one by one by electric motor. A Thin cushion sheet is rolled up with each blanket to cushion solar cells. Sheet is taken up on roller as blanket is unfurled. Unrolling proceeds automatically.
The breadboard surface accuracy measurement sensor is an optical angle sensor which provides continuous line of sight position measurements of infrared source targets placed strategically about the antenna surface. Measurements of target coordinates define the surface figure relative to a reference frame on the antenna. Sensor operation, tests and test results to date are described.
The requirements, capabilities, and unique design features of the instrument payload subsystem payload clamp assembly (PCA) are presented. The PCA is designed to have the flexibility to accommodate a wide payload range varying from 0.5 m to 3 m in diameter and from 500 kg to 3000 kg mass. This is achieved by modular clamp design in connection with replaceable struts. The design features include clamping of payload in a statically determined way and actuation of clamp latches by means of single linear actuator via ropes. The vibration and TV environmental conditions for the mechanism are extremely severe. A structural and prototype model was built. Test results of the operating characteristic are presented. In addition, problems of tribology are highlighted.
A prototype water quality monitoring system is described which offers almost continuous in situ monitoring. The two-man portable system features: (1) a microprocessor controlled central processing unit which allows preprogrammed sampling schedules and reprogramming in situ; (2) a subsurface unit for multiple depth capability and security from vandalism; (3) an acoustic data link for communications between the subsurface unit and the surface control unit; (4) eight water quality parameter sensors; (5) a nonvolatile magnetic bubble memory which prevents data loss in the event of power interruption; (6) a rechargeable power supply sufficient for 2 weeks of unattended operation; (7) a water sampler which can collect samples for laboratory analysis; (8) data output in direct engineering units on printed tape or through a computer compatible link; (9) internal electronic calibration eliminating external sensor adjustment; and (10) acoustic location and recovery systems. Data obtained in Saginaw Bay, Lake Huron are tabulated.
Two mechanism types are presented, a rigid boom system and a 'hold and release' mechanism for spherical sensors. Both mechanisms have been designed, developed and tested by Saab-Space AB, Linkoping, Sweden for the VIKING project under a contract from the Swedish Space Corporation.
A procedure for manufacturing long slender graphite tubing is desired. Such tubing has considerable application in truss supported spacecraft applications. The motivation for the selection of the tubing size developed in this program is for use as struts in a NASA, Langley Research Center truss supported antenna concept. The manufacturing procedure uses the LMSC vertical winding machine. A procedure for fabricating graphite epoxy tubing with an aluminum foil inner and outer wrap was also developed. The aluminum foil provides a vapor barrier, significantly improves the thermal conductivity, and provides an excellent thermal control surface.
The preliminary design of a 15 meter diameter mechanically scanned, offset rotating, fed parabolic reflector antenna system is reported and the results of preliminary performance, structural and thermal analyses are presented.
(Previously cited in issue 01, p. 17, Accession no. A82-10418)
Explore the source record for details and available documents.
Cable-controlled mechanisms allow large structures stored in small spaces. Combination of telescoping struts and pivot points allows very large structure collapsed into very small one. Concept used not only for straight but for tapered or curved ones as well. Structure adaptable to terrestrial uses as portable towers, scaffolds, and bridge beams folded compactly for transportation or storage.
Improvement of technology of space systems control is discussed. Future space systems such as large antennas or a space station may have dimensions on the order of 30 m to 200 m, yet their basic structures may be relatively lightweight and flexible, making ground tests for loads, controls analyses, and design verifications questionable if not impossible. Abandoning the extensive ground test and analysis verification program that led to the success of previous spacecraft is not a sensible option; making it meaningful using current technology will require inefficient, ultraconservative structure and control designs. New test methods are outlined.
The testing of a hyperbolic trumpet non-imaging secondary concentrator with a parabolic dish having slope errors of about 10 mrad is reported. The trumpet, which has a concentration ratio of 2.1, increased the flux through a 141-mm focal aperture by 72%, with an efficiency of 96%, thus demonstrating its potential for use in tandem with cheap dishes having relatively large slope errors.
The ground test article fabrication and assembly plan was completed by Santek Engineering, Inc. The plan was reviewed and accepted by Rockwell during an on-site visit to the Santek facility. Raw material and hardware orders were placed by Santek in July. Approximately 98% of the raw materials and 10% of the hardware deliveries have been completed. Several material and hardware substitutions were requested by Santek due to no-bid responses from suppliers or excessive costs for limited quantity items. These substitutions were evaluated and approved by Rockwell Engineering and Material and Process and are being incorporated into the drawing package. Santek started fabrication of detail parts in mid-August. Their current resource utilization is at approximately 50% of the planned eventual commitment and is increasing at a rate commensurate with the fabrication and assembly plan. At this writing, Santek's estimate of completion is 03%. During verification testing of the diagonal member joint, in a program funded by Rockwell discretionary funds, the axial load to unlock the joint was found to increase significantly after a few cycles of operation. This was attributed to galling, poor lubrication, and locking pin geometry. A change of materials, lubricant, and modification of the pin geometry reduced the unlocking load and provided repeatability after 50 cycles of operation. This new design is being implemented into the ground test article.
Current plans for the Mobile VLBI program are addressed. Present mobile stations and their past activities are summarized, and past and future modes of obtaining data are compared, including the 'burst' and 'leap frog' modes. The observational campaign for Mobile VLBI is described, emphasizing the portions in Canada and Alaska. The extent to which the mobile stations are utilized and the ways in which the site visit yield may be increased are discussed.
High moduli of elasticity potentially achievable. Suited for application in large diameter antennas on orbiting spacecraft. Fabrication process can accurately place dry graphite fibers and overwrap them with aluminum foil, resulting in straight, slender graphite tubes. Graphite fibers pulled out of creeled spools and fed through ceramic eyelets. Spools of aluminum foil mounted on rotating ring and capture graphite fiber as vertical winding machine carriage moves upward. Epoxy resin applied by mechanically spreading epoxy on tetrafluoroethylene mandrel by means of doctor blade attached to carriage.
Santek's ability to recover from a schedule slip was reviewed and found satisfactory. Diagonal member bond joints were subjected to static load to failure tests. Results are considered adequate.