Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data analytic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Turbine airfoil film cooling

Emphasis is placed on developing more accurate analytical models for predicting turbine airfoil external heat transfer rates. Performance goals of new engines require highly refined, accurate design tools to meet durability requirements. In order to obtain improvements in analytical capabilities, programs are required which focus on enhancing analytical techniques through verification of new models by comparison with relevant experimental data. The objectives of the current program are to develop an analytical approach, based on boundary layer theory, for predicting the effects of airfoil film cooling on downstream heat transfer rates and to verify the resulting analytical method by comparison of predictions with hot cascade data obtained under this program.

Hylton, Larry D.↗

Technology integration box beam failure study

The objective of this paper is to describe current results from an on-going study of the mechanisms that led to the failure of the TIBB. Experimental and analytical results are presented. Experimental results include load, strain, and deflection data for the TIBB (Technology Integration Box Beam). An analytical investigation was conducted to compliment the experimental investigation and to gain additional insight into the TIBB structural response. Analytical results include strain and deflection results from a global analysis of the TIBB. A local analysis of the failure region is being completed. These analytical results are validated through comparisons with the experimental results from the TIBB tests. The experimental and analytical results from the TIBB tests are used to determine a sequence of events that may have resulted in failure of the TIBB. A potential cause of failure is high stresses in a stiffener runout region. Typical analytical results are presented for a stiffener runout specimen that is being defined to simulate the TIBB failure mechanisms. The results of this study are anticipated to provide better understanding of potential failure mechanisms in composite aircraft structures, to lead to future design improvements, and to identify needed analytical tools for design and analysis.

Shuart, Mark J.↗

A Process Model of Interpersonal Relationship Formation in Isolated and Confined Environments

Future space crews will face several challenges such as living and working in a confined environment, isolated from others. These circumstances increase the importance of interpersonal compatibility, teamwork, and team performance. The interpersonal compatibility of space crews has been and continues to be of interest to both NASA and the Institute of Biomedical Problems (IBMP), whose research informs operations for Roscosmos. In NASA-sponsored research, interpersonal compatibility has been examined in terms of how the combination of team members’ personality traits, values, and demographics shape team member relationships and team performance overtime. IBMP-sponsored research mostly has moved away from trait-based approaches toward an idiographic (in-depth, heavily descriptive) approach to researching crew interpersonal relations. This research uses software such as Personal Self-Perception and Attitudes (PSPA), network approaches to team member relations, and content analysis of interactions to assess interpersonal compatibility, and infer states and team dynamics. Our research program integrated these ideas. Our primary research aim was to develop and empirically test a process model of interpersonal relationship formation in isolated and confinement environments. We created a model, collected data from teams in an isolated and confined environment, and applied a novel analytical strategy that combines trait, state, and interaction data (i.e., relational events). We focused specifically on the formation of strained relationships in isolation and confinement—or with whom fellow crewmembers find it difficult to work.

S T Bell↗

A method for correlating performance data of a terrestrial solar cell array

An analytical method was proposed for characterizing array power output, in the region of maximum power, as a function of environmental variables. The correlation provided a way of evaluating the output of an array under environmental conditions that differ from those encountered during testing. Power data obtained at one location was used to predict array performance at other locations.

Simon, F. F.↗

Analysis of liquid rocket combustion chamber turbulence levels from diffusion data

The intensity of turbulence and the Lagrangian correlation coefficient in a liquid-rocket combustion chamber have been analytically determined from an analysis of experimental diffusion data obtained in a small rocket engine which operated at 300-psia chamber pressure and produced approximately 250 pounds thrust. Results of gas-sample measurements obtained by Orsat and gas-chromatograph techniques to determine helium-concentration profiles were analyzed on the basis of Taylor's (1921) turbulent diffusion theory to obtain turbulence flow-field parameters. The results of the analysis indicate that turbulent diffusion in a combustion chamber can be adequately modeled by the one-dimensional Taylor theory, which assumes that the intensity of turbulence is a function only of axial distance in the chamber and that the Lagrangian correlation coefficient is expressed by a power law. The results indicate a higher intensity of turbulence and lower correlation than previously expected.

Smith, L. O., Jr.↗

Space shuttle vehicle automatic docking study

The material presented is divided into three main areas of accomplishment. The first is a description of the angle only docking sensor concept and the computational requirements to develop useful guidance information from the raw angle only data. The second describes the analytical effort including the MIT in-house computer simulation, the development of guidance equations and vehicle stability related thereto, and presents the results of studies covering the effects of employing Kalman filtering with the sensor. The third area presents the conclusions and recommendations resulting from the program. Much of the material has appeared in previous reports, but is included here for the sake of completeness. New material indicating how the computer might operate to identify the individual sources in the target array is included.

Blanchard, E. P.↗

Apollo 9 thermal-control-coating degradation

Analytical studies, ground-test data, and flight data before 1967 indicated that degradation of Apollo thermal-control coatings could be expected, possibly to an extent requiring spacecraft design changes to accomplish the worst-case lunar-landing mission. On the Apollo 9 mission, specimens of Apollo thermal-control coatings were retrieved by the astronauts during the extravehicular activity. These specimens were the first to be returned to earth from space unaffected by entry conditions. Subsequent measurements of the thermophysical properties (solar absorptance and hemispherical emittance) of the thermal-control-sample coatings revealed degradation levels well within the design capability of the Apollo spacecraft.

Smith, J. A.↗

Effect of duct shape, Mach number, and lining construction on measured suppressor attenuation and comparison with theory

Noise attenuation was measured for several types of cylindrical suppressors that use a duct lining composed of honeycomb cells covered with a perforated plate. The experimental technique used gave attenuation data that were repeatable and free of noise floors and other sources of error. The suppressor length, the effective acoustic diameter, suppressor shape and flow velocity were varied. The agreement among the attenuation data and two widely used analytical models was generally satisfactory. Changes were also made in the construction of the acoustic lining to measure their effect on attenuation. One of these produced a very broadband muffler.

Olsen, W. A.↗

Results of a space shuttle pulme impingement investigation at stage separation in the NASA-MSFC impulse base flow facility

Results are presented for an experimental space shuttle stage separation plume impingement program conducted in the NASA-Marshall Space Flight Center's impulse base flow facility (IBFF). Major objectives of the investigation were to: (1)determine the degree of dual engine exhaust plume simulation obtained using the equivalent engine; (2) determine the applicability of the analytical techniques; and (3) obtain data applicable for use in full-scale studies. The IBFF tests determined the orbiter rocket motor plume impingement loads, both pressure and heating, on a 3 percent General Dynamics B-15B booster configuration in a quiescent environment simulating a nominal staging altitude of 73.2 km (240,00 ft). The data included plume surveys of two 3 percent scale orbiter nozzles, and a 4.242 percent scaled equivalent nozzle - equivalent in the sense that it was designed to have the same nozzle-throat-to-area ratio as the two 3 percent nozzles and, within the tolerances assigned for machining the hardware, this was accomplished.

Mccanna, R. W.↗

Model tests on unsteady rotor wake effects.

A qualitative model of unsteady asymmetric wake effects is considered, taking into account a progressing blade flapping mode in which each blade flaps in a rotating frame of reference. The rotor model used for the tests is two bladed. The experimental data are compared with an analytical flapping response. It is found that the steady wake effects are largest at zero advance ratio and low collective pitch. The effects remain significant at higher advance ratios and collective pitch settings.

Hohenemser, K. H.↗

Rotor noise due to inflow turbulence.

The interaction of turbulent velocity fluctuations of the inflow with rotor blades and the resulting acoustic radiation is examined in terms of: dipole sources due to blade loading, monopole sources due to thickness of the rotating blades, and quadrupole sources due to velocity fluctuations in the flow region. Depending upon the length and time scales of the turbulence, sufficient number of blades may interact with a coherent eddy to radiate noise with discrete peaks at blade passing frequency and its harmonics. Theoretical estimates of acoustic radiation to on-axis points from a typical subsonic rotor are presented, and it is noted that the discrete tone noise is primarily from dipole radiation. Discrete tone noise levels observed in narrow band analysis of test data show reasonable agreement with analytical predictions.

Rao, G. V. R.↗

A method for determining the preferred orientation of crystallites normal to a surface

Techniques representing the angular distribution of a particular direction in a crystallographic reference frame or analytical methods were developed. The data required by these techniques for displaying preferred orientation is obtained by measuring the orientation of a large number of crystallites. This may be done visually using etch-pit or Laue techniques which, experimentally, are both tedious and difficult. The intensities of X ray diffraction maxima are proportional to the number of crystallites whose crystallographic plane normals bisect the incident and diffracted beams. Parameters used in calculating powder patterns are also presented.

Snyder, R. L.↗

A simplified signal analysis technique for obtaining optimal estimates of system dynamics

A procedure is presented which provides an algorithm for the special case where the unknown system has n inputs, and n finite length realizations for each of the n input signals are available. Given an n input system and n experimental records for each input, it is shown that the optimum Wiener filter is easily computed using only the experimental data. No assumptions concerning the analytical structure of the spectral matrix are necessary.

Whitbeck, R. F.↗

Transport of liquid state nitrogen through long length service lines during thermal/vacuum testing

Physical and analytical aspects associated with the transport are presented. Included is a definition of the problems and difficulties imposed by the servicing of a typical solid cryogen system, as well as a discussion of the transport requirements and of the rationale which governed their solution. A successful detailed transport configuration is defined, and the application of established mathematics to the design approach is demonstrated. The significance of head pressure, pressure drop, line friction, heat leak, Reynolds number, and the fundamental equilibrium demands of pressure and temperature were examined as they relate to the achievement of liquid state flow. Performance predictions were made for the transport system, and several analytical quantities are tabulated. These data are analyzed and compared with measured and calculated results obtained while actually servicing a solid cryogen system during thermal/vacuum testing.

Florio, F. A.↗

Assessment of analytical and experimental techniques utilized in conducting plume technology tests 575 and 593

Since exhaust plumes affect vehicle base environment (pressure and heat loads) and the orbiter vehicle aerodynamic control surface effectiveness, an intensive program involving detailed analytical and experimental investigations of the exhaust plume/vehicle interaction was undertaken as a pertinent part of the overall space shuttle development program. The program, called the Plume Technology program, has as its objective the determination of the criteria for simulating rocket engine (in particular, space shuttle propulsion system) plume-induced aerodynamic effects in a wind tunnel environment. The comprehensive experimental program was conducted using test facilities at NASA's Marshall Space Flight Center and Ames Research Center. A post-test examination of some of the experimental results obtained from NASA-MSFC's 14 x 14-inch trisonic wind tunnel is presented. A description is given of the test facility, simulant gas supply system, nozzle hardware, test procedure and test matrix. Analysis of exhaust plume flow fields and comparison of analytical and experimental exhaust plume data are presented.

Baker, L. R.↗

Modal analysis and dynamic stresses for acoustically excited Shuttle insulation tiles

The thermal protection system of the Space Shuttle consists of thousands of separate insulation tiles, of varying thicknesses, bonded to the orbiter's surface through a soft strain-isolation pad which is bonded, in turn, to the vehicle's stiffened metallic skin. A modal procedure for obtaining the acoustically induced RMS stress in these comparatively thick tiles is described. The modes employed are generated by a previously developed iterative procedure which converges rapidly for the combined system of tiles and primary structure considered. Each tile is idealized by several hundred three-dimensional finite elements and all tiles on a given panel interact dynamically. Acoustic response results from the present analyses are presented. Comparisons with other analytical results and measured modal data for a typical Shuttle panel, both with and without tiles, are made, and the agreement is good.

Ojalvo, I. U.↗