Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “controlled”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fuel performance evaluation of two high burnup PWR core designs during normal operation, control rod withdrawal, and control rod ejection scenarios

There is interest among utilities to extend the current, 18-month operating cycle to 24 months. Economically, this extension would require greater than 5 % enrichment and peak rod average discharge burnup levels above 62 GWd/MTU. A notable challenge of increasing enrichment is the resulting additional excess reactivity encountered during the early stages of fuel life. To accommodate, burnable absorbers beyond soluble boron are introduced into the fuel system. In high burnup fuels, the possibilities of cladding lift-off and fuel melting increase due, in part, to increased rod internal pressures and limited fuel thermal conductivity, respectively. This work collaboratively employs PARCS, RELAP5-3D, and BISON to compare the fuel performance of two high burnup fuel candidates with higher than 5 % enrichment. Here, the fuel performance parameters were compared to current NRC guidance. The results demonstrate an annular fuel design with homogenously blended gadolinium as a burnable absorber operates with greater safety margins during normal operation, allowing for additional operational flexibility. During normal operation, the core design utilizing Integral Fuel Burnable Absorber pins contained fuel pins which reached plenum pressures above 15.5 MPa by the end of the first fuel cycle and fuel pins experienced cladding hoop strains above 1 %. In the Gd core design, only two observed pins experienced plenum pressures above 15.5 MPa and no pins exceeded 1 % cladding hoop strain. During the control rod withdrawal scenario, plenum pressures for pins in both designs marginally exceeded system pressure, however neither experienced excessive hoop strain. The Gd core design experienced a maximum fuel temperature of 2418 K, which is significantly higher than the Integral Fuel Burnable Absorber design at 2157 K, but still within regulatory guidance. We predicted that the fuel in both could return to service after the CRW event. We also predicted that cladding would not fail during the Control Rod Ejection in either core design. Generally, the Integral Fuel Burnable Absorber core design performed with greater safety margin with regards to temperature during normal operation and the transient events. However, the Gd core design performed with greater safety margin regarding plenum pressure and hoop strain limits during normal operation and both transient events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Control of Calcium Phosphate Nucleation and Transformation through Interactions of Enamelin and Amelogenin Exhibits the “Goldilocks Effect”

Although amelogenin comprises the vast majority of the matrix that templates calcium phosphate nucleation during enamel formation, other proteins, particularly enamelin, are also known to play an important role in the formation of enamel’s intricate architecture. However, there is little understanding of the interplay between amelogenin and enamelin in controlling processes of mineral nucleation and growth. Here we used an in vitro model to investigate the impact of enamelin co-assembly with amelogenin on calcium phosphate nucleation for a range of enamelin-to-amelogenin ratios. We found that amelogenin alone is a weak promoter of nucleation, but addition of enamelin enhanced nucleation rates in a highly non-linear, non-monotonic manner reaching a sharp maximum at a ratio of 1:50. We provide a phenomenological model to explain this effect that assumes only isolated enamelin proteins can act as sites of enhanced nucleation, while enamelin oligomers cannot. Even when co-assembly is random, the model reproduces the observed behavior, suggesting a simple means to tightly control the timing and extent of nucleation and phase transformation by amelogenin and enamelin.

Tao, Jinhui↗
DOE OSTI2016

Dimensionally Controlled Lithiation of Chromium Oxide

Oxide conversion reactions are an alternative approach for high capacity lithium ion batteries but are known to suffer from structural irreversibility associated with the phase separation and reconstitution of reduced metal species and Li2O. In particular, the morphology of the reduced metal species is thought to play a critical role in the electrochemical properties of a conversion material. Here we use a model electrode with alternating layers of chromium and chromium oxide to better understand and control these phase changes in real-time and at molecular length scales. Despite lacking crystallinity at the atomic scale, this superstructure is observed (with X-ray reflectivity, XR) to lithiate and delithiate in a purely one-dimensional manner, preserving the layered structure. The XR data show that the metal layers act as nucleation sites for the reduction of chromium in the conversion reaction. Irreversibility during delithiation is due to the formation of a ternary phase, LiCrO2, which can be further delithiated at higher potentials. The results reveal that the combination of confining lithiation to nanoscale sheets of Li2O and the availability of reaction sites in the metal layers in the layered structure is a strategy for improving the reversibility and mass transport properties that can be used in a wide range of conversion materials.

25 ENERGY STORAGE↗
DOE OSTI2018

Unveiling the Structural Evolution of Ag 1.2 Mn 8 O 16 under Coulombically Controlled (De)Lithiation

MnO 2 materials are considered promising cathode materials for rechargeable lithium, sodium, and magnesium batteries due to their earth abundance and environmental friendliness. One polymorph of MnO 2 , α-MnO 2 , has 2 × 2 tunnels (4.6 Å × 4.6 Å) in its structural framework, which provide facile diffusion pathways for guest ions. In this work, a silver-ion-containing α-MnO 2 (Ag 1.2 Mn 8 O 16 ) is examined as a candidate cathode material for Li based batteries. Electrochemical stability of Ag 1.2 Mn 8 O 16 is investigated through Coulombically controlled reduction under 2 or 4 molar electron equivalents (e.e.). Terminal discharge voltage remains almost constant under 2 e.e. of cycling, whereas it continuously decreases under repetitive reduction by 4 e.e. Thus, detailed structural analyses were utilized to investigate the structural evolution upon lithiation. Significant increases in lattice a (17.7%) and atomic distances (~4.8%) are observed when x in Li x Ag 1.2 Mn 8 O 16 is >4. Ag metal forms at this level of lithiation concomitant with a large structural distortion to the Mn–O framework. In contrast, lattice a only expands by 2.2% and Mn–O/Mn-Mn distances show minor changes (~1.4%) at x < 2. The structural deformation (tunnel breakage) at x > 4 inhibits the recovery of the original structure, leading to poor cycle stability at high lithiation levels. This report establishes the correlation among local structure changes, amorphization processes, formation of Ag 0 , and long-term cycle stability for this silver-containing α-MnO 2 type material at both low and high lithiation levels.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Redox Fluctuations Control the Coupled Cycling of Iron and Carbon in Tropical Forest Soils

In this paper, oscillating redox conditions are a common feature of humid tropical forest soils, driven by an ample supply and dynamics of reductants, high moisture, microbial oxygen consumption, and finely textured clays that limit diffusion. However, the net result of variable soil redox regimes on iron (Fe) mineral dynamics and associated carbon (C) forms and fluxes is poorly understood in tropical soils. Using a 44-day redox incubation experiment with humid tropical forest soils from Puerto Rico, we examined patterns in Fe and C transformations under four redox regimes: static anoxic, "flux 4-day" (4d oxic, 4d anoxic), "flux 8-day" (8d oxic, 4d anoxic) and static oxic. Prolonged anoxia promoted reductive dissolution of Fe-oxides, and led to an increase in soluble Fe(II) and amorphous Fe oxide pools. Preferential dissolution of the less-crystalline Fe pool was evident immediately following a shift in bulk redox status (oxic to anoxic), and coincided with increased dissolved organic C, presumably due to acidification or direct release of organic matter (OM) from dissolving Fe(III) mineral phases. The average nominal oxidation state of water-soluble C was lowest under persistent anoxic conditions, suggesting that more reduced organic compounds were metabolically unavailable for microbial consumption under reducing conditions. Anoxic soil compounds had high H/C values (and were similar to lignin-like compounds) whereas oxic soil compounds had higher O/C values, akin to tannin- and cellulose-like components. Cumulative respiration derived from native soil organic C was highest in static oxic soils. These results show how Fe minerals and Fe-OM interactions in tropical soils are highly sensitive to variable redox effects. Shifting soil oxygen availability rapidly impacted exchanges between mineral-sorbed and aqueous C pools, increased the dissolved organic C pool under anoxic conditions implying that the periodicity of low-redox events may control the fate of C in wet tropical soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Wet to Dry Controls Lanthanide Scandate Synthesis

The choice of temperature and gas conditions used in a water pressure-controlled reactor is guided by density functional theory (DFT) to synthesize nearly phase pure lanthanide scandate nanoparticles (LnScO 3 , Ln = La, Nd, Sm, Gd). In this synthetic method, low water vapor partial pressures, well below water’s gas liquidus, inhibit particle growth, while an excess of water vapor results in undesired rare earth hydroxide and oxyhydroxide secondary phases. The optimal humidity for high-purity LnScO 3 particle synthesis is shown to vary with the lanthanide; DFT is used to calculate the thermodynamics of secondary phase formation for each lanthanide tested, such that the role of water vapor may be quantified and used to maintain phase purity (greater than 96 mol%) across the series. Furthermore, the combination of thermodynamic calculation and experimental confirmation with this pressure-controlled reactor provides an opportunity to explore analogous syntheses of other inorganic perovskite nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Axial H-Bonding Solvent Controls Inhomogeneous Spectral Broadening, While Peripheral H-Bonding Solvent Controls Vibronic Broadening: Cresyl Violet in Methanol

The dynamics of the nuclei of both a chromophore and its condensed-phase environment control many spectral features, including the vibronic and inhomogeneous broadening present in spectral line shapes. For the cresyl violet chromophore in methanol, we here analyze and isolate the effect of specific chromophore–solvent interactions on simulated spectral densities, reorganization energies, and linear absorption spectra. Employing both chromophore and its condensed-phase environment control many spectral features, including the vibronic and inhomogeneous broadening present in spectral line shapes. For the cresyl violet chromophore in methanol, we here analyze and isolate the effect of specific chromophore–solvent interactions on simulated spectral densities, reorganization energies, and linear absorption spectra. Employing both force field and ab initio molecular dynamics trajectories along with the inclusion of only certain solvent molecules in the excited-state calculations, we determine that the methanol molecules axial to the chromophore are responsible for the majority of inhomogeneous broadening, with a single methanol molecule that forms an axial hydrogen bond dominating the response. Furthermore, the strong peripheral hydrogen bonds do not contribute to spectral broadening, as they are very stable throughout the dynamics and do not lead to increased energy-gap fluctuations. We also find that treating the strong peripheral hydrogen bonds as molecular mechanical point charges during the molecular dynamics simulation underestimates the vibronic coupling. Including these peripheral hydrogen bonding methanol molecules in the quantum-mechanical region in a geometry optimization increases the vibronic coupling, suggesting that a more advanced treatment of these strongly interacting solvent molecules during the molecular dynamics trajectory may be necessary to capture the full vibronic spectral broadening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Reversible Control of Spacing in Charged Lamellar Membrane Hydrogels by Hydrophobically Mediated Tethering with Symmetric and Asymmetric Double-End-Anchored Poly(ethylene glycol)s

Complex materials often achieve their remarkable functional properties by hierarchical assembly of building blocks via competing and/or synergistic interactions. Here, we describe the properties of new double-end-anchored poly(ethylene glycol)s (DEA-PEGs)—macromolecules designed to impart hydrophobically mediated tethering attractions between charged lipid membranes. We synthesized DEA-PEGs (MW 2000 (2K) and 4.6K) with two double-tail (symmetric) or a double-tail and a single-tail (asymmetric) hydrophobic end anchors and characterized their equilibrium and kinetic properties using small-angle X-ray scattering. Control multilayer membranes without and with PEG lipid (i.e., single-end-anchored PEG) swelled continuously, with the interlayer spacing increasing between 30 and 90 wt % water content due to electrostatic as well as, in the case of PEG lipid, steric repulsion. In contrast, interlayer spacings in lamellar membrane hydrogels containing DEA-PEGs expanded over a limited water dilution range and reached a “locked” state, which displayed a near constant membrane wall-to-wall spacing (δ w ) with further increases in water content. Remarkably, the locked state displays a simple relation to the PEG radius of gyration δ w ≈ 1.6R G for both 2K and 4.6K PEG. Nevertheless, δ w being considerably less than the physical size of PEG (2(5/3) 1/2 RG) is highly unexpected and implies that, compared to free PEG, anchoring of the PEG tether at both ends leads to a considerable distortion of the PEG conformation confined between layers. Significantly, the lamellar hydrogel may be designed to reversibly transition from a locked to an unlocked (membrane unbinding) state by variations in the DEA-PEG concentration, controlling the strength of the interlayer attractions due to bridging conformations. Lastly, the findings with DEA-PEGs have broad implications for hydrophobic-mediated assembly of lipid- or surfactant-coated building blocks with distinct shape and size, at predictable spacing, in aqueous environments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗
DOE OSTI2014

Spatial Control Of Functional Properties Via Octahedral Modulations In Complex Oxide Superlattices

The design of distortions and rotations of the corner-connected BO6 octahedra across interfaces has emerged as an exciting platform to control electronic or ferroic behavior in ABO3 perovskite heterostructures. Here, we investigate isovalent manganite superlattices, [(La0.7Sr0.3MnO3)n/(Eu0.7Sr0.3MnO3)n]×m, as a route to spatial control over electronic bandwidth and ferromagnetism through the creation of octahedral superstructures. Electron energy loss spectroscopy confirms a uniform Mn valence state throughout the superlattices. In contrast, the presence of modulations of the MnO6 octahedral rotations along the growth direction commensurate with the superlattice period is revealed by scanning transmission electron microscopy and x-ray diffraction. We show that the Curie temperatures of the constituent materials can be systematically engineered via the octahedral superstructures leading to a modulated magnetization in samples where the superlattice period is larger than the interfacial octahedral coupling length scale, while a single magnetic transition is observed in the short period superlattices.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Controlled synthesis of highly-branched plasmonic gold nanoparticles through peptoid engineering

Inspired by peptide- and protein-controlled formation of hierarchical inorganic nanostructures in nature, herein we report the design of sequence-defined peptoids for biomimetic synthesis of flower-like gold nanosuperstruc-tures. We demonstrate that the peptoid-induced morphosyn-thesis of gold nanoflowers is sequence-dependent. By varying the hydrophobicity, number of carboxylate and amino groups, and side-chain positions of peptoids, we develop a rule of thumb for designing peptoids that yield gold nanoflowers. Through a combination of hyperspectral UV-Vis absorption micro-spectroscopy (H-UVVIS-AMS) and three-photon photoemission electron microscopy (TP-PEEM), we measured the plasmonic properties of individual nanoflowers. Whereas H-UVVIS-AMS experiments revealed well-defined plasmon resonances centered at ~528 nm, TP-PEEM measurements showed an unprecedented plasmonic enhancement as high as 105 for a single nanoflower. A com-bination of the unique plasmonic property and the high sta-bility endows the peptoid-engineered nanoflowers with po-tential applications in chemical and biological imaging. FY, YC, HJ and C-LC acknowledge support by the Materials Synthesis and Simulation Across Scales (MS3) Initiative, through the Laboratory Directed Research & Development (LDRD) fund at Pacific Northwest National Laboratory (PNNL). FY was also partially supported by fellowships from Shandong Provincial Education Association for International Exchanges. YG was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. PZE acknowledges support from the Laboratory Directed Research and Development Program through a Linus Pauling Fellowship at PNNL. PNNL is multi-program national laboratory operated for the Department of Energy by Battelle under Contracts No. DE-AC05-76RL01830. The authors are most grateful to Alan Joly and Wayne Hess (PNNL) for their support with the PEEM measurements and several useful discussions.

Yan, Feng↗
DOE OSTI2021

Emergent properties at oxide interfaces controlled by ferroelectric polarization

Abstract Ferroelectric materials are characterized by the spontaneous polarization switchable by the applied fields, which can act as a “gate” to control various properties of ferroelectric/insulator interfaces. Here we review the recent studies on the modulation of oxide hetero-/homo-interfaces by ferroelectric polarization. We discuss the potential applications of recently developed four-dimensional scanning transmission electron microscopy and how it can provide insights into the fundamental understanding of ferroelectric polarization-induced phenomena and stimulate future computational studies. Finally, we give the outlook for the potentials, the challenges, and the opportunities for the contribution of materials computation to future progress in the area.

Chemistry↗