Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “control structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Abstract for CRADA between NETL and the University of Massachusetts Lowell (AGMT-1275)

The demand for printed electronics over conventional electronics is growing each year due to their low costs, low material waste during manufacturing, and compatibility with flexible substrates. The development of inks for printed electronics is a challenge because each printing technology requires different viscosities and curing behaviors to create devices with controlled structures at the micron scale, or smaller. Carbon is a great candidate for fabricating printed electronics devices because it is inexpensive and earth abundant, easily functionalized to impart miscibility with solvent systems, and has electrical properties that can be tuned from insulating to conducting. Despite these advantages, carbons are rarely used for printed electronics because there is a scarcity of inks available for non-contact printing technologies. To address these challenges, the National Energy Technology Laboratory (NETL) will collaborate with the University of Massachusetts Lowell (Participant) through its Printed Electronics Research Collaborative (PERC) to develop engineered carbons and ink formulations optimized specifically for printing radio- and microwave-frequency electronic devices using ink jet, aerosol jet, syringe dispensing, and other additive manufacturing techniques. NETL will process coal, petroleum, and other carbon feedstocks to make engineered carbons with the appropriate composition, microstructure, surface functionalization, and particle morphologies needed to stabilize ink suspensions and impart useful electronic properties to printed devices. The University of Massachusetts Lowell will utilize these engineered carbons to determine which solvent systems and ink additives are needed to achieve the appropriate viscosity, stability, and printability to make useful ink formulations. The University of Massachusetts Lowell will then utilize these inks to manufacture printed resistors and conductors using inkjet, aerosol jet, and syringe dispensing printing methods and will characterize device performance using four-point probe resistivity measurements, contact angle measurements to assess wettability, adhesion evaluation to various substrates, and focused ion beam and scanning electron microscopy for surface and density investigations of printed devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

TRACE Input Modernization

This work presents a Tom’s Obvious Minimal Language (TOML)-based representation of input for the US Nuclear Regulatory Commission’s TRAC/RELAP Advanced Computational Engine (TRACE) thermal hydraulics code. Implemented using the Workbench Analysis Sequence Processor (WASP), the approach maps traditional TRACE input structures to a hierarchical format composed of named parameters, typed values, and native data collections. The resulting representation preserves TRACE’s existing modeling capabilities while providing a modern, structured interface for model development and management. WASP further extends TOML through a file import directive that supports modular model composition and reusable input organization. In addition, WASP provides extended array data entry convenience with various data repeat and interpolation capabilities. Examples of the new TOML syntax are provided for major TRACE input categories, including hydraulic components, heat structures, control systems, and trip logic. The TOML representation establishes a foundation for improved validation, tooling, automation, and model maintainability while remaining compatible with existing TRACE workflows. To facilitate migration to the TOML-based input format, the TRACE executable now supports conversion of native TRACE input into an intermediate JSON representation. A Python utility subsequently transforms the JSON data into an equivalent TOML model. Lastly, the TRACE executable now supports execution using TOML-formatted input.

Lefebvre, Robert A. [Oak Ridge National Laboratory↗
DOE OSTI2026

A State-Space Model for Stability Boundary Analysis of Grid-Following Voltage Source Converters Considering Grid Conditions

With the growing significance of renewable energy resources and energy storage systems, the number of grid-connected inverters has been rising at an increasingly rapid pace. Generally, these inverters are directly integrated with the distribution network by synchronizing with the grid voltage at the point of common coupling. However, the low grid strength and varying R/X ratios, as the common characteristics of most distribution networks or weak grids, can lead to dynamic interactions that comprise stability and limit the power transfer capacity of grid-connected inverters. To ensure stable operation of the inverters, researchers must determine the stability boundary, described as the maximum power transfer capacity of grid-connected inverters under the premise of maintaining system small-signal stability. For this purpose, we propose to formulate a state-space model of the system in the synchronously rotating dq-frame of reference and perform eigenvalue analysis to determine the stability boundary. With a detailed model of the control structure and parameters of the grid-connected inverters, the stability boundary is identified as a surface with respect to different grid strengths and R/X ratios. Case study results of proposed eigenvalue analysis are compared with those of admittance model-based stability analysis as well as time-domain simulation using a switching model in Matlab/Simulink, validating the effectiveness and accuracy of the proposed eigenvalue analysis for stability boundary identification.

grid-connected inverters↗
DOE OSTI2021

Effect of Polymer Removal on the Morphology and Phase of the Nanoparticles in All-Inorganic Heterostructures Synthesized via Two-Step Polymer Infiltration

Polymer templates play an essential role in the robust infiltration-based synthesis of functional multicomponent heterostructures with controlled structure, porosity, and composition. Such heterostructures are be used as hybrid organic–inorganic composites or as all-inorganic systems once the polymer templates are removed. Using iron oxide/alumina heterostructures formed by two-step infiltration of polystyrene-block-polyvinyl pyridine block copolymer with iron and aluminum precursors from the solution and vapor-phases, respectively, we show that the phase and morphology of iron oxide nanoparticles dramatically depend on the approach used to remove the polymer. We demonstrate that thermal and plasma oxidative treatments result in iron oxide nanoparticles with either solid or hollow morphologies, respectively, that lead to different magnetic properties of the resulting materials. Our study extends the boundaries of structure manipulations in multicomponent heterostructures synthesized using polymer infiltration synthesis, and hence their properties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1968

Structural thermal-control coatings

Specifications have been formulated for application of thermal-control paints on large radar antenna structures exposed to solar radiation. The paint minimizes thermally induced mechanical deflections and glare of incident solar radiation.

Stoller, F. W.↗
NASA NTRS1971

Study-simulation of space station dynamics

Matrix algebra translator and executor /MATE/ takes equations describing structural control system environmental interaction problem for flexible spacecraft components and loads them into self programming computer.

Gaitens, M. J.↗
NASA NTRS1972

A reconnaissance space sensing investigation of the crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau: April 1971

The author has identified the following significant results. An area of anomalous linear topographic grain and color expressions was recognized in Apollo 9 and ERTS-1 imagery along the Colorado River of northwestern Arizona and southern Nevada. Field reconnaissance and analysis of U-2 photography has shown the anomaly to be a zone of north to north-northwest trending dike swarms and associated granitic plutons. The dikes vary in composition from rhyolite to diabase, with an average composition nearer rhyolite. Shearing and displacement of host rocks along dikes suggest dike emplacement along active fault zones. Post-dike deformation has resulted in shearing and complex normal faulting along a similar north-south trend. The epizonal plutonism and volcanism of this north-south belt appears to represent a structurally controlled volcanogenic province which ends abruptly in the vicinity of Lake Mead at a probable eastern extension of the Las Vegas Shear Zone. The magnitude and chronology of extensional faulting and plutonism recognized in the north-south zone, support the hypothesis that the Las Vegas Shear Zone is a transform fault separating two areas of crustal spreading.

Bechtold, I. C.↗
NASA NTRS1973

Artic and subarctic environmental analyses utilizing ERTS-1 imagery. Discipline 8: Interpretation techniques development. Subdiscipline C: Classfication and pattern recognition

The author has identified the following significant results. Uncontrolled photo mosaics of ERTS-1 imagery using MSS band 5 and 7 at a scale of 1:1,000,000 were used to make a preliminary surficial geology map in northcentral Alaska. Seven distinct geologic units were recognized, defined, and mapped directly on a photo mosaic. Results are closely correlated with published surficial geology maps. Eight MSS images were examined to test utility of ERTS data in studies of coastal processes and stream hydrology, and in the identification and interpretation of geomorphic features throughout Alaska. The feasibility of using ERTS-1 data to map structural lineaments is well illustrated on a mosaic of 8, band 5 MSS images. Along the northern edge of the Brooks Range one lineament can be followed the entire width of the mosaic, a distance of 225 miles. Two nearly parallel lineaments can be seen running along the northern and southern edges of the Schwatka Mountains. About 135 miles south of these two lineaments another series located in the Chitanana River region can be followed for 45 miles. These lineaments appear to be faults, and it is interesting to note that the Yukon River parallels these and appears to be structurally controlled.

Anderson, D. M.↗
NASA NTRS1973

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

There are no author-identified significant results in this report. Research progress in applications of ERTS-1 MSS imagery in study of Basin-Range tectonics is summarized. Field reconnaissance of ERTS-1 image anomalies has resulted in recognition of previously unreported fault zones and regional structural control of volcanic and plutonic activity. NIMBUS, Apollo 9, X-15, U-2, and SLAR imagery are discussed with specific applications, and methods of image enhancement and analysis employed in the research are summarized. Areas studied and methods employed in geologic field work are outlined.

Bechtold, I. C.↗
NASA NTRS1972

Planimetric shapes of lunar rilles, part Q

Selected Apollo 16 photographs of lunar rilles have been analyzed with a new technique that includes a finite Fourier analysis. Preliminary results suggest that it will be possible to classify rilles quantitatively by their planimetric shape. Shapes of possible terrestrial analogs for lunar rilles also can be compared to the shapes of lunar rilles by using this new technique. Preliminary results also suggest that the new technique may be useful for demonstrating structural control of shape of lunar rilles.

Oberbeck, V. R.↗
NASA NTRS1973

Martian lineaments from Mariner 6 and 7 photographs

Mariner 6 and 7 photographs were used to investigate the nature and importance of linear surface trends on Mars. Cross correlations of frequency-azimuth distributions of linear trends from different Mariner frames indicate that lineations not recognized as topographic features have a component of pseudoforms, probably introduced during digital reconstruction of the pictures. Similar statistical tests may aid in the analysis of surface trends from future satellites and space probes. The most reliable data were separated into photometrically defined provinces. Meridiani Sinus and Margaritifer Sinus display five major trends in common, which are interpreted as extensions of crustal weaknesses related to the enormous equatorial canyon revealed in Mariner 6 and 9 pictures. Alignments of crater wall segments generally match these trends and suggest structural control of crater plan. Crater chains, however, do not match these trends and are interpreted as secondary impacts. Rose diagrams of lineations in Deucalionis Regio exhibit much more complexity and are believed to reflect a better preserved or more complex geologic history.

Schultz, P. H.↗
NASA NTRS1973

An evaluation of the suitability of ERTS data for the purposes of petroleum exploration

The author has identified the following significant results. ERTS-1 imagery seems to be good to excellent for reconnaissance level investigations of large sedimentary basins such as the Anadarko Basin. Many lithologic boundaries, and geomorphic features, and linear features inferred to be indicative of geologic structure are visible in the imagery. This imagery in conjunction with high altitude photography seems to be useful as a tool for intermediate level geologic exploration. Several types of crudely circular anomalous features, such as geomorphic/structural anomalies, hazy areas and tonal anomalies, are identifiable in the imagery. There seems to be a strong correlation between the geomorphic/structural and hazy anomalies and known structurally controlled oil and gas fields. The features recognizable on ERTS-1 imagery and their ease of recognition vary from area to area even in imagery acquired at the same time under essentially uniform atmospheric conditions. Repeated coverage is exceedingly valuable in geologic applications. One time complete coverage even for the various seasons does not reveal all the features that ERTS-1 can reveal.

Collins, R. J., Jr.↗
NASA NTRS1973

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

The author has identified the following significant results. Research progress in applications of ERTS-1 MSS imagery to study of Basin-Range tectonics is summarized. Field reconnaissance of ERTS-1 image anomalies has resulted in recognition of previously unreported fault zones and regional structural control of volcanic and plutonic activity. Nimbus, Apollo 9, X-15, U-2, and SIAR imagery are discussed with specific applications, and methods of image enhancement and analysis employed in the research are summarized. Field areas studied and methods employed in geologic field work are outlined.

Liggett, M. A.↗
NASA NTRS1972

Astronaut observations from lunar orbit and their geologic significance.

To supplement orbital photography and other remotely sensed data, visual observations were made of 15 lunar surface targets during Apollo mission 15. Among the significant results are (1) characterization of the floor material of Tsiolkovsky as no darker than the average (Eratosthenian) mare material, and interpretration of the lineated unit on the crater rim as a rock avalanche; (2) identification of layers on the wall of the crater Picard, which is probably volcanic in origin, (3) explanation of the ray-excluded zone of the crater Proclus as the result of structurally controlled ray shadowing; (4) observation of cinder cones in the Littrow area with dark haloes that probably are composed of pyroclastic deposits; and (5) recognition that the termini of numerous sinuous rilles in Oceanus Procellarum are flooded with younger mare materials that may have covered older terminal deposits.

El-Baz, F.↗
NASA NTRS1973

Identification, distribution and significance of lunar volcanic domes.

Over 300 previously unrecognized volcanic domes were identified on Lunar Orbiter photographs using the following criteria: (1) the recognition of land forms on the Moon similar in morphology to terrestrial volcanic domes, (2) structural control, (3) geomorphic discordance, and (4) the recognition of land forms modified by dome-like swellings. Many terrestrial volcanic domes are similar in morphology to lunar domes. This analogy suggests that some lunar hills are in fact extrusive volcanic domes. Many of the domes identified in this paper seem to be related to basins and craters, and with the exception of local tectonic grid control few domes are related to any observable Moon-wide pattern.

Smith, E. I.↗
NASA NTRS1973

Solar Electric Propulsion Stage design

This paper summarizes the analyses and design studies performed for the Solar Electric Propulsion Stage (SEPS). Mission analysis results were used to establish general design requirements. A performance sensitivity analysis was then used to define an operational power level of 21 kW for accomplishing a broad range of interplanetary and earth-orbital missions. With this base, propulsion system and stage subsystem design analyses were performed to support concept and configuration studies. Design study areas include solar array, thrust subsystem, thermal control, structures, and astrionics. Results are presented primarily for areas not covered by more specific technical papers (i.e., thrust subsystem, solar array, design requirements and configuration studies).

Masek, T. D.↗