Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Mechanical cutting of irradiated reactor internal components

Mechanical cutting methods to volume reduce and package reactor internal components are now a viable solution for stakeholders challenged with the retirement of first generation nuclear facilities. The recent completion of the removal of the Reactor Vessel Internals (RVI) from within the Sacramento Municipal Utility District's (SMUD) Rancho Seco Nuclear Power Plant demonstrates that unlike previous methods, inclusive of plasma arc and abrasive water-jet cutting, mechanical cutting minimizes exposure to workers, costly water cleanup, and excessive secondary waste generation. Reactor internal components were segmented, packaged, and removed from the reactor building for shipment or storage, allowing the reactor cavity to be drained and follow-on reactor segmentation activities to proceed in the dry state. Area exposure rates at the work positions during the segmentation process were generally 1 mR per hr. Radiological exposure documented for the underwater segmentation processes totaled 13 person rem. The reactor internals weighing 343,000 pounds were segmented into over 200 pieces for maximum shipping package efficiency and produced 5,600 lb of stainless steel chips and shavings which were packaged in void spaces of existing disposal containers, therefore creating no additional disposal volume. Because no secondary waste was driven into suspension in the reactor cavity water, the water was free released after one pass through a charcoal bed and ion exchange filter system. Mechanical cutting techniques are capable of underwater segmentation of highly radioactive components on a large scale. This method minimized radiological exposure and costly water cleanup while creating no secondary waste.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Physics-constrained fault diagnosis framework for monitoring a multi-component thermal hydraulic system

A method for diagnosing faults includes receiving a system description of a thermal hydraulic system, the system description indicating a plurality of components and sensors. The method also includes constructing, based on physical conservations laws and using the system description, a plurality of physics-based models for the plurality of components, each of the plurality of physics-based models including unknown parameters. The method further includes receiving historical measurements and calibrating the physics-based models by calculating the unknown parameters of each of the physics-based models using the historical measurements to produce calibrated models. The method also includes receiving sensor measurements of the sensors, and calculating residuals corresponding to differences between measurements predicted by the plurality of calibrated models and the sensor measurements. The method also includes determining, based on the calculated residuals, a fault of a component or a sensor, and generating an alert indicating the fault.

Nguyen, Tat Nghia↗

Evaluate an impact of incident alpha particle and gamma ray on human blood components: A comparison study

An impact of alpha and gamma irradiation on human blood components have been evaluated and compared for healthy blood samples (male and females). Irradiation dose and time of irradiation calibrated and considered as a main comparison factors. Density of blood components measured for each in vitro irradiation before and after irradiation for males and females. Survey radiation dosimeter (Inspector Exp) and nuclear track detectors type CR-39 used to evaluate exposure dose rate and incident density of alpha particles, respectively. Experiment results verified that the irradiation of blood makes ionizing of blood components, either alpha or gamma irradiation dose, and the impacts of ionizing radiation were relativity for WBC, RBC, and PLT. Limited irradiation doses of 1-5 μSv/hr considered as a low radiation dose of alpha and gamma radiation sources ({sup 226}Ra, and {sup 137}Cs). Density of alpha particles accumulated on the blood surface was 34 (alpha particle/cm{sup 2}) for selected dose of incident alpha particle. Optimum value of irradiation dose and time of irradiation were 5 μSv/hr and 4 second for males and females. On the other hands, the values of irradiation dose and time of irradiation were 2.1 μSv/hr and 2 second for males and females for gamma irradiation. Thus, present results demonstrated that densities of RBC and WBC cells are capable of inducing reproduction in vitro for both type of irradiation. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cost Savings Resulting From Classified Component Disposal at the Nevada National Security Site (NNSS) - 16440

This paper discusses the Nevada National Security Site (NNSS) capability to dispose of both radioactive and non-radioactive classified components and the tremendous cost-avoidance in storage, sanitization and/or demilitarization (Demil), and disposal that have been experienced by generators. One generator, The U.S. Air Force Materiel Command (AFMC), 414. Supply Chain Management Squadron out of Hill Air Force Base (HAFB) experienced total cost-avoidance in the last two years of $218 million on an investment of $1.9 million for disposal at the NNSS. They also accelerated the planned component disposition schedule by 7 years. In 2012, the NNSS added the capability of meeting a key national resource for the safe, secure disposal of classified components that have been declared excess to national security requirements. Since that time the program has continued to grow and expand. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pathways towards Valid Data: Assessment of Optimized Packaging Strategies for Core Components - 18158

Every company that runs nuclear power plants needs a strategy for disposal of the radioactive waste and for decommissioning and dismantling of its nuclear reactors. The dismantling progress of several German NPPs is already in an advanced stage. Hence, particularly highly activated core components have to be disposed of as radioactive waste. Nevertheless, this is also an issue during the operating phase due to necessary replacements of highly activated core components such as PWR control elements or RPV heads. The conditioning of waste packages for final disposal in the German repository Konrad requires the core components to be dismantled, packaged and dried. Therefore, a qualified packaging strategy is needed to ensure a reliable compliance with the protection objectives of the repository and an optimized utilization of prescribed contingents. Exemplified by PWR control elements a pathway is drawn how to perform an optimized packaging strategy in compliance with the protection objectives of the repository based on only few relevant radionuclides derived from activation calculations. For these calculations, particularly the influence of trace impurities in the materials has to be considered and their amounts have to be verified or analyzed by sampling. Furthermore, low nuclide activities from contamination cannot simply be neglected because some of them are obliged to be declared or their radiological relevance has not been sufficiently determined. Due to various influence factors, qualified sampling strategies need carefully considered concepts. Therefore, detailed planning facilitates the qualification and approval process and reduces the costs for analyses and the number of containers. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

IS Process Hydrogen Production Test for Components and System Made of Industrial Structural Material - (I) - Bunsen and HI Concentration Section - 18628

Japan Atomic Energy Agency (JAEA) has been conducting research and development on a hydrogen production system as one of the heat applications of High Temperature Gas-Cooled Reactor. The iodine-sulfur (IS) process is one of the most promising thermochemical methods because of its potential for large-scale CO{sub 2} free hydrogen production. In the IS process, hydrogen is produced through three chemical reactions: Bunsen reaction, hydriodic acid (HI) decomposition and sulfuric acid (H{sub 2}SO{sub 4}) decomposition. High corrosion resistance is required of the component materials in the IS process because the high-temperature strong acids flow in this process. JAEA has fabricated a 30 NL/h - H{sub 2}-scale apparatus made of glass and Teflon which boast corrosion-resistance for the acids, and has succeeded a continuous operation for a week. However, for practical use on a larger scale, the components have to be made of industrial corrosion-resistance materials. As a next step, we have fabricated the new test-facility which can produce H{sub 2} of 100 NL/h-scale for the demonstration of the continuous operation by using the industrial materials. In advance of the continuous operation, we investigated the performance of the components in each section of the IS process. In this presentation, the test results of Bunsen and HI concentration sections will mainly be discussed. (authors)

08 HYDROGEN↗

IS Process Hydrogen Production Test for Components and System Made of Industrial Structural Material (II) - H{sub 2}SO{sub 4} decomposition, HI Distillation, and HI Decomposition Section - 18629

Japan Atomic Energy Agency (JAEA) has been conducting research and development on the thermochemical iodine sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of High-Temperature Gas-Cooled Reactors. The IS process consists of three chemical reactions: Bunsen reaction, hydriodic acid (HI) decomposition and sulfuric acid (H{sub 2}SO{sub 4}) decomposition. It is necessary for component materials to have high corrosion resistance because high-temperature strong acids such as HI and H{sub 2}SO{sub 4} are used in the IS process. JAEA, so far, achieved to produce hydrogen for one week continuously with a hydrogen production rate of approximately 30 NL/h by a test apparatus made of glass and fluoro-resin material. As a next step toward practical application, we test-fabricated main components, that is, Bunsen reactor, sulfuric acid decomposer, and HI decomposer, made of industrial materials and investigated their integrity in the practical corrosive environments of the IS process. Based on their results, we have constructed a 100 NL/h-H{sub 2}-scale test apparatus made of industrial materials. This test apparatus is divided by chemical reaction and unit operation into five sections: Bunsen section, H{sub 2}SO{sub 4} decomposition section, HI concentration section, HI distillation section, and HI decomposition section. First, we investigated performance of components in each section. This report discusses test results of the H{sub 2}SO{sub 4} decomposition section, HI distillation section, and HI decomposition section. (authors)

08 HYDROGEN↗

Effect of Aging and Demand for Reliability Analysis of Degrading Components

According to the U.S Energy Information Administration (EIA), the U.S fossil fuel share of energy consumption in 2015 was 67%. Furthermore, the Ecotricity UK report based on the CIA World Factbook states that with the current rate of consumption of fossil fuels, petroleum would run out by 2052, natural gas by 2060, and coal by 2088. No fossil fuel will remain by the next century. Besides the limited reserves of fossil fuel, massive consumption of fossil fuel also raises concerns about global warming and pollution. Therefore, there has been a growing interest in reducing fossil fuel consumption in the energy structure and in increasing the proportion of clean energy. Renewable energy (e.g. wind, solar) has the potential for distributed generation. However, the availability for renewable energy fluctuates and is uncontrollable. Therefore, additional energy sources need to be coupled with renewable energy to produce a stable electricity generation profile. Nuclear energy can serve this purpose as it is a clean energy source, has low greenhouse gas emission and possesses high power density and baseload power supply with low fuel cost. It is desirable to develop a hybrid energy system that combines both renewable energy and nuclear energy to meet low carbon emission goals and to utilize renewable energy. Such a nuclear hybrid energy system, consisting of different energy subsystems such as nuclear, solar, and wind, involves frequent switching between different energy subsystems. Since the primary loop in a nuclear power plant generates constant heat, the turbine bypass line in the secondary loop is required to switch frequently to meet the gap in the energy demand and that generated by the renewables. The increased usage of the turbine bypass system is considered to be the major difference between a nuclear hybrid energy system and a traditional nuclear power plant. Reliability analysis for designing such a complex system involves both high level fault propagation analysis at the conceptual design stage and low level failure prediction for specific components. The main focus of this summary to derive a degradation model of hardware components which can later help in the high level fault propagation analysis. The degradation model is a low level failure mode model that combines the effects of natural aging and frequent switching. The model can be used for predicting components' failure due to specific failure modes. The results can serve as indicators for conducting repair actions and maintenance to minimize Operation and Maintenance (O and M) costs. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Correlation Between Weather Alerts and Grid Component Failures for Grid Alert

Weather events cause most grid failures. Often, we even get notifications on our phones to take cover or be prepared for an imminent event. If electric grid utilities had a similar warning that also included probable scenarios and the equipment involved, they could prepare and minimize the effects. Recent research at Idaho National Laboratory into electric grid risk analysis methods resulted in a tool that allows for the development of the most likely scenarios given failure probabilities of grid components. INL has a project with the U.S. Department of Energy’s Cybersecurity, Energy Security, and Emergency Response (CESER) program to develop a Grid Alert application that receives messages from the existing emergency alert system, filters and determines components possibly affected by the emergency event, calculates probable scenarios uses MASTERRI and then notifies the utility if there is significant risk. Historical failure data of elements that comprise the U.S. electric grid have been compiled by utilities and organizations such as the international regulatory body North American Electric Reliability Corporation (NERC). Nominal failure rates are obtained from this data. To make this tool possible, estimated failure rates are needed for different component types given the alert type, severity, and location. Historic weather-related grid element failures are correlated with historic weather events from Integrated Public Alert & Warning System (IPAWS). These correlated events and failures are used along with Bayesian updates from the historical norms to provide a modified failure rate for grid elements in the alert areas and calculate probable scenarios. This discusses the Grid Alert project plan but focuses on the data gathered and process used in determining failure rates for possible grid failure scenarios.

24 - POWER TRANSMISSION AND DISTRIBUTION↗

Physics and Components syntax to enable a systems-based approach to multiphysics

Simulations in MOOSE have traditionally used kernel and boundary condition classes to describe the equations. Downstream applications leveraged a system called Actions to define a pre-packaged discretization of the equations they solve. Unfortunately, the Action base class was very limited, and most applications implemented the same concepts in their Actions. This led to an increased maintenance burden and a reduction in coupling opportunities, save for the use of MultiApps which renders each input mostly independent. With the introduction of multi-system capabilities in MOOSE, there is growing interest in defining entire simulations of complex multiphysics systems in a single input file. By introducing a new Physics system, with its dedicated syntax and a new base class providing wide-ranging capabilities, we are now able to define multiple equations in a single input file in a compact and user-friendly way. With new interactions between Physics and the Component system, these equations can be defined on each component of a complex system. In this talk, we will present the capabilities of these new systems, their interactions, and how to define complex systems multiphysics simulations with Physics and Components.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Antenna with distributed strip and integrated electronic components

An antenna comprises electrical conductors arranged to form a radiating element including a folded line configuration and a distributed strip configuration, where the radiating element can be in proximity to a ground conductor and/or arranged as a dipole. Embodiments of the antenna include conductor patterns formed on a printed wiring board, having a ground plane, spacedly adjacent to and coplanar with the radiating element. An antenna can comprise a distributed strip patterned on a printed wiring board, integrated with electronic components mounted on top of or below the distributed strip, and substantially within the extents of the distributed strip. Mounting of electronic components on top of or below the distributed strip has little effect on the performance of the antenna, and allows for realizing the combination of the antenna and integrated components in a compact form. An embodiment of the invention comprises an antenna including a distributed strip, integrated with a battery mounted on the distributed strip.

47 OTHER INSTRUMENTATION↗

Ion Partitioning at the liquid/vapor interface of a multi-component alkali halidesolution: A model for aqueous sea salt aerosols

The chemistry of Br species associated with sea salt ice and aerosols has been implicated in the episodes of ozone depletion reported at Arctic sunrise. However, Br{sup -} is only a minor component in sea salt, which has a Br{sup -}/Cl{sup -} molar ratio of {approx}0.0015. Sea salt is a complex mixture of many different species, with NaCl as the primary component. In recent years experimental and theoretical studies have reported enhancement of the large, more polarizable halide ion at the liquid/vapor interface of corresponding aqueous alkali halide solutions. The proposed enhancement is likely to influence the availability of sea salt Br{sup -} for heterogeneous reactions such as those involved in the ozone depletion episodes. We report here ambient pressure x-ray photoelectron spectroscopy studies and molecular dynamics simulations showing direct evidence of Br{sup -} enhancement at the interface of an aqueous NaCl solution doped with bromide. The experiments were carried out on samples with Br{sup -}/Cl{sup -} ratios in the range 0.1% to 10%, the latter being also the ratio for which simulations were carried out. This is the first direct measurement of interfacial enhancement of Br{sup -} in a multi-component solution with particular relevance to sea salt chemistry.

36 MATERIALS SCIENCE↗

Manufacturing complex silica aerogel target components

Aerogel is a material used in numerous components in High Energy Density Physics targets. In the past these components were molded into the proper shapes. Artifacts left in the parts from the molding process, such as contour irregularities from shrinkage and density gradients caused by the skin, have caused LANL to pursue machining as a way to make the components.

36 MATERIALS SCIENCE↗

Low-temperature oxidative degradation of PBX 9501 and its components determined via molecular weight analysis of the poly [ester urethane] binder

The results of following the oxidative degradation of a plastic-bonded explosive (PBX 9501) are reported. Into over 1100 sealed containers were placed samples of PBX 9501 and combinations of its components and aged at relatively low temperatures to induce oxidative degradation of the samples. One of the components of the explosive is a poly(ester urethane) polymer and the oxidative degradation of the samples were following by measuring the molecular weight change of the polymer by gel permeation chromatography (coupled with both differential refractive index and multiangle laser light scattering detectors). Multiple temperatures between 40 and 64 {sup o}C were used to accelerate the aging of the samples. Interesting induction period behavior, along with both molecular weight increasing (crosslinking) and decreasing (chain scissioning) processes, were found at these relatively mild conditions. The molecular weight growth rates were fit to a random crosslinking model for all the combinations of components. The fit rate coefficients show Arrhenius behavior and activation energies and frequency factors were obtained. The kinetics of molecular weight growth shows a compensatory effect between the Arrhenius prefactors and activation energies, suggesting a common degradation process between PBX 9501 and the various combinations of its constituents. An oxidative chemical mechanism of the polymer is postulated, consistent with previous experimental results, that involves a competition between urethane radical crosslinking and carbonyl formation.

36 MATERIALS SCIENCE↗

Model Components of the Certification Framework for Geologic Carbon Sequestration Risk Assessment

We have developed a framework for assessing the leakage risk of geologic carbon sequestration sites. This framework, known as the Certification Framework (CF), emphasizes wells and faults as the primary potential leakage conduits. Vulnerable resources are grouped into compartments, and impacts due to leakage are quantified by the leakage flux or concentrations that could potentially occur in compartments under various scenarios. The CF utilizes several model components to simulate leakage scenarios. One model component is a catalog of results of reservoir simulations that can be queried to estimate plume travel distances and times, rather than requiring CF users to run new reservoir simulations for each case. Other model components developed for the CF and described here include fault characterization using fault-population statistics; fault connection probability using fuzzy rules; well-flow modeling with a drift-flux model implemented in TOUGH2; and atmospheric dense-gas dispersion using a mesoscale weather prediction code.

54 ENVIRONMENTAL SCIENCES↗

LONG TERM AGING AND SURVEILLANCE OF 9975 PACKAGE COMPONENTS

The mission of the 9975 package, originally designed only for transportation of radioactive materials, has been broadened to include storage at the Savannah River Site. Two components of this package, namely the containment vessel O-rings and fiberboard overpack, require continued integrity assessment under the storage conditions. The performance of the components over time is being evaluated using accelerated-aging studies. Compression stress relaxation (CSR) and leak testing are being used to measure the performance of O-rings. The performance of the fiberboard is being evaluated using compression strength, thermal conductivity, specific heat capacity and other physical properties. Models developed from the data collected provide an initial prediction of service life for the two components, and support the conclusion that normal service conditions will not degrade the performance of the package beyond specified functional requirements for the first assessment interval. Increased confidence in this conclusion is derived from field surveillance data and destructive evaluation of packages removed from storage.

42 ENGINEERING↗

Loaded transducer for downhole drilling components

A system for transmitting information between downhole components has a first downhole component with a first mating surface and a second downhole component having a second mating surface configured to substantially mate with the first mating surface. The system also has a first transmission element with a first communicating surface and is mounted within a recess in the first mating surface. The first transmission element also has an angled surface. The recess has a side with multiple slopes for interacting with the angled surface, each slope exerting a different spring force on the first transmission element. A second transmission element has a second communicating surface mounted proximate the second mating surface and adapted to communicate with the first communicating surface.

47 OTHER INSTRUMENTATION↗

Damage prognosis of adhesively-bonded joints in laminated composite structural components of unmanned aerial vehicles

The extensive use of lightweight advanced composite materials in unmanned aerial vehicles (UAVs) drastically increases the sensitivity to both fatigue- and impact-induced damage of their critical structural components (e.g., wings and tail stabilizers) during service life. The spar-to-skin adhesive joints are considered one of the most fatigue sensitive subcomponents of a lightweight UAV composite wing with damage progressively evolving from the wing root. This paper presents a comprehensive probabilistic methodology for predicting the remaining service life of adhesively-bonded joints in laminated composite structural components of UAVs. Non-destructive evaluation techniques and Bayesian inference are used to (i) assess the current state of damage of the system and, (ii) update the probability distribution of the damage extent at various locations. A probabilistic model for future loads and a mechanics-based damage model are then used to stochastically propagate damage through the joint. Combined local (e.g., exceedance of a critical damage size) and global (e.g.. flutter instability) failure criteria are finally used to compute the probability of component failure at future times. The applicability and the partial validation of the proposed methodology are then briefly discussed by analyzing the debonding propagation, along a pre-defined adhesive interface, in a simply supported laminated composite beam with solid rectangular cross section, subjected to a concentrated load applied at mid-span. A specially developed Eliler-Bernoulli beam finite element with interlaminar slip along the damageable interface is used in combination with a cohesive zone model to study the fatigue-induced degradation in the adhesive material. The preliminary numerical results presented are promising for the future validation of the methodology.

42 ENGINEERING↗