Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A flying hot wire study of the turbulent near wake of a circular cylinder at Reynolds number of 140,000

The phenomenology was studied of the processes of vortex formation and transport in the near wake, at a Reynolds number sufficiently high to insure a fully turbulent wake, but low enough to insure a laminar separation. The apparatus developed for measuring this flow consisted of X-array hot wire probes mounted on the ends of a pair of whirling arms. A computer controlled data acquisition system was slaved to the position of the rotating arm and managed, monitored, edited, and recorded the vast profusion of data which is continuously poured out by the device. Results are presented which show the instantaneous velocity, intermittency, vorticity, and stress fields as a function of phase for the first six diameters of the near wake. The stresses in the near wake emerge as a concatenation of peaks and valleys, some the result of strong induced motions in the outer flow which cause free stream fluid to move rapidly inward toward the center of the wake, others the result of the random motions of the background turbulence.

Cantwell, B. J.↗

Pines method for circular and elliptical orbits

The Pines method for trajectory integration is derived from the equations of two-body motion. The concept of the perturbation derivative is explained and a formal definition is presented. An algorithm for applying the Pines method to numerical integration of trajectories is included.

Semar, C.↗

Nominal Profile Refinements Report: Target in 120 Nautical Mile Circular Orbit

The compability of the nominal rendezvous sequence with low target orbits is addressed. It was found that for targets in low earth orbits certain modifications of the nominal sequence are required to achieve a feasible anytime liftoff capability, notably the use of elliptical phasing orbits and the allowance of up to two days for rendezvous under certain phasing conditions.

Source record↗

Sound radiation from randomly vibrating beams of finite circular cross section

The radiation of sound from vibrating cylindrical beams is analyzed based on the frequency of the beam vibrations and the physical characteristics of the beam and its surroundings. A statistical analysis of random beam vibrations allows this result to be independent of the boundary conditions at the ends of the beam. The acoustic power radiated by the beam can be determined from a knowledge of the frequency band vibration data without a knowledge of the individual modal vibration amplitudes. A practical example of the usefulness of this technique is provided by the application of the theoretical calculations to the prediction of the octave band acoustic power output of the picking sticks of an automatic textile loom. Calculations are made of the expected octave band sound pressure levels based on measured acceleration data. These theoretical levels are subsequently compared with actual sound pressure level measurements of loom noise.

Sutterlin, M. W.↗

Stability of flow of a thermoviscoelastic fluid between rotating coaxial circular cylinders

The stability problem of thermoviscoelastic fluid flow between rotating coaxial cylinders is investigated using nonlinear thermoviscoelastic constitutive equations due to Eringen and Koh. The velocity field is found to be identical with that of the classical viscous case and the case of the viscoelastic fluid, but the temperature and pressure fields are found to be different. By imposing some physically reasonable mechanical and geometrical restrictions on the flow, and by a suitable mathematical analysis, the problem is reduced to a characteristic value problem. The resulting problem is solved and stability criteria are obtained in terms of critical Taylor numbers. In general, it is found that thermoviscoelastic fluids are more stable than classical viscous fluids and viscoinelastic fluids under similar conditions.

Ghandour, N. N.↗

Optimal one-section and two-section circular sound-absorbing duct liners for plane-wave and monopole sources without flow

A discrete frequency study is made of the influence of source characteristics on the optimal properties of acoustically lined uniform and two section ducts. Two simplified sources, a plane wave and a monopole, are considered in some detail and over a greater frequency range than has been previously studied. Source and termination impedance effects are given limited examination. An example of a turbomachinery source and three associated source variants is also presented. Optimal liner designs based on modal theory approach the Cremer criterion at low frequencies and the geometric acoustics limit at high frequencies. Over an intermediate frequency range, optimal two section liners produced higher transmission losses than did the uniform configurations. Source distribution effects were found to have a significant effect on optimal liner design, but source and termination impedance effects appear to be relatively unimportant.

Lester, H. C.↗

Mode I analysis of a cracked circular disk subject to a couple and a force

Mode 1 stress intensity coefficients were obtained for an edge-cracked disk (round compact specimen). Results for this plane elastostatic problem, obtained by a boundary collocation analysis are presented for ratios 0.35 less than A/D less than 1, where A is the crack length and D is the disk diameter. The results presented are for two complementary types of loading. By superposition of these results the stress intensity factor K sub I for any practical load line location of a pin-loaded round compact specimen can be obtained.

Gross, B.↗

TRASYS: Checkout of accuracy of direct irradiation calculations for discs, trapezoids, cones, and circular paraboloids

Results of the direct irradiation link of the TRASYS program are evaluated. Several surface configurations were investigated. The accuracy of the results was examined for simple cases where the answers were analytically known. By varying an accuracy factor in the program, the amount of computer time needed to achieve different degress of accuracy was determined.

Mackeen, R. C.↗

Propagation along azimuthally magnetized ferrite-loaded circular waveguides

The paper describes the modal dispersion characteristics of electromagnetic waves traveling along the azimuthally magnetized ferrite-loaded coaxial transmission line and the ferrite-loaded wire. The modal dispersion curves are used to determine the pass and stop bands of normal propagation. Boundary-value problems were solved with Bolle-Heller functions. The dispersion characteristics of transverse electric modes are presented as plots of the normalized propagation constant vs the normalized frequency.

Mueller, R. S.↗

Experimental studies of effects of tilt and structural asymmetry on vibration characteristics of thin-wall circular cylinders partly filled with liquid

The effects of tilt and structural asymmetry on the vibration characteristics of partly liquid-filled thin-wall cylinders were experimentally studied. It was found that tilting the longitudinal axis of a partly filled axisymmetric cylinder from the vertical could markedly reduce its resonant frequencies and change significantly the shape of the circumferential modes. For the minimum frequency modes, vibratory motion occurred only on that side of the cylinder where the liquid was deepest. An empirical equation was derived that gives the equivalent liquid depth of an untilted cylinder having the same minimum resonant frequency as a tilted, partly filled cylinder. Circumferential mode shapes of an untilted asymmetric cylinder were similar to those of the tilted, partly filled axisymmetric cylinder. Vibratory motion in the minimum frequency modes occurred in most instances only on the side of minimum thickness. Correlation between test data and results from a reformulated NASTRAN hydroelastic analysis was excellent.

Herr, R. W.↗

A method of weighted residuals with trigonometric basis functions for sound transmission in circular ducts

The method of weighted residuals (MWR) in the form of a modified Galerkin method with trigonometric basis functions is used to compute the transmission of sound in an axisymmetric duct. The method is used to generate the axial wave number for uniform ducts. These are compared with exact solutions generated by a formal eigenvalue routine in the hard-wall case and a Runge-Kutta integration eigenvalue scheme in the soft-wall case. The method is applicable to both flow and no-flow cases.

Vo, P. T.↗

Nonlinear behavior of circular plates with work hardening

Tests were performed on two simply supported plates of aluminum alloy 2024-0, under a central concentrated load, with peak deflections up to 2.6 times the thickness. The load was provided by a small-diameter hard-steel rod. The plates had diameter-to-thickness ratios (D/h) of 20 and 41. Measurements were made of load, deflections and strains; membrane and bending strains were calculated from the test data. The test data are presented in comparison with theoretical predictions generated by the finite-element-computer code PLANS, which includes material and geometric nonlinearities. The theoretical prediction was excellent for deflections, and generally good for strains, when the central force was represented by a line load around the loading rod's contact circle.

Winter, R.↗

Mode I analysis of a cracked circular disk subject to a couple and a force

Mode I stress intensity coefficients were obtained for an edge-cracked disk (round compact specimen). Results for this plane elastostatic problem, obtained by a boundary collocation analysis are presented for A/D ratios of 0.35 to 1, where A is the crack length and D is the disk diameter. The results presented are for two complementary types of loading. By superposition of these results the stress intensity factor for any practical load line location of a pin-loaded round compact specimen can be obtained.

Gross, B.↗