Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “case studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Operando XPS for Plasma Process Monitoring: A Case Study on the Hydrogenation of Copper Oxide Confined under h-BN

Here, we demonstrate that ambient pressure x-ray photoelectron spectroscopy (APXPS) can be used for in situ studies of dynamic changes in surface chemistry in a plasma environment. This opens a new and vast application space for XPS and greatly complements modern spectroscopy techniques to probe plasma-solid/liquid interactions relevant to process monitoring in the semiconductor industry, bio-medical plasma applications and plasma remediation technologies. Hexagonal boron nitride (h-BN) grown on Cu was used in this study as a well-defined model system for plasma process monitoring and because of its unique chemical, optical and electrical properties that make it a prospective material for advanced electronics. To better understand the stability and surface chemistry of h-BN during plasma assisted processing, we track in real time the plasma-induced chemical state changes of B, N and the underlying Cu substrate using APXPS equipped with an AC discharge plasma source operating at 13 Pa. Residual gas analysis (RGA) mass-spectra were concurrently collected during plasma-XPS to track reaction products formed during plasma exposure. A clear reduction of Cu x O is seen, while an h-BN layer remains intact, suggesting hydrogen radical (H • ) species can attack the exposed and h-BN covered Cu oxide patches and partially reduce the underlying substrate without significantly damaging the overlaying h-BN, which is of practical importance for development of h-BN encapsulated devices and interfaces. In addition to demonstration of plasma-XPS capabilities we discuss the observed challenges (e.g., parasitic plasma-chamber walls reactions and charging effects) and propose potential solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Assessing the Sensitivity of Pourbaix Diagrams to Computational Protocols: Electrochemical Stability of Ni Oxides as a Case Study

Pourbaix diagrams stand as a useful tool in assessing and visualizing materials’ electrochemical stability and are widely used for electrocatalyst design. However, their reliability hinges on the accuracy of the chemical potentials of involved phases, which may bear uncertainties and can be significantly impacted by decision-making steps in the computational protocol. Here, this study introduces a robust sensitivity analysis framework, exemplified through a detailed examination of the computational Pourbaix diagram of Ni, the oxides of which are used as high-activity and cost-friendly catalysts for many electrochemical reactions. Quantities of interest derived from the Pourbaix diagram include the appearance and stability domain of the catalytically active Ni oxide phases along with the onset electrochemical potentials of phase transitions. These metrics can guide the design of operational conditions for Ni oxide electrocatalysts. We find that the employed DFT exchange-correlation functional has the most significant influence on the computed Pourbaix diagram. Uncertainties on crystal structures, along with their related ab initio energetics, are also found to affect the size of the phase stability domain. Higher-order coupling among input parameters is found to play a crucial role in influencing the appearance and distribution of Ni phases in the diagram. Our findings suggest a need to consider variations and uncertainties associated with the computational procedures on predicted Pourbaix diagrams for materials design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Combined Wave Function and Density Functional Approach for K-Edge X-ray Absorption Near-Edge Spectroscopy: A Case Study of Hydrated First-Row Transition Metal Ions

The prediction of X-ray absorption spectra (XAS) of transition metal complexes has important and broad application areas in chemistry and biology. In this letter, we have investigated the predictive ability of multiconfiguration pair-density functional theory (MC-PDFT) for X-ray absorption spectra by calculating the metal K pre-edge features of aquated 3d transition metal ions in common oxidation states. MC-PDFT results were compared with experimentally measured spectra as well as analyzed against results from restricted active-space second-order perturbation theory (RASPT2) and time-dependent density functional theory (TDDFT). As expected, TDDFT performs well for excited states that can be accurately represented by singly excited configurations but fails for excited states where higher order excitations become important. On the other hand, both RASPT2 and MC-PDFT provide quantitatively accurate results for all excited states irrespective of their character. While core-level spectroscopy with RASPT2 is accurate, it is computationally expensive. Finally, our results show that MC-PDFT performs equally well with significantly lower computational cost and is an encouraging alternate approach for X-ray spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spin-Dependent Stereochemistry: A Nonadiabatic Quantum Dynamics Case Study of S + H 2 → SH + H Reaction

We study the spin-dependent stereodynamics of the S + H 2 → SH + H reaction by using full-dimensional quantum dynamics calculations with zero total nuclear angular momentum along the triplet 3 A" states and singlet 1 A' states. We find that the interplay between the electronic spin direction and the molecular geometry has a measurable influence on the singlet–triplet intersystem crossing reaction probabilities. Our results show that for some incident scattering angles in the body-fixed frame, the relative difference in intersystem crossing reaction probabilities (as determined between spin up and spin down initial states) can be as large as 15%. Furthermore, our findings are an ab initio demonstration of spin-dependent nonadiabatic dynamics, which we hope will shine light as far as understanding the chiral-induced spin selectivity effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Compressive Creep of Polymer Electrolyte Membranes: A Case Study for Electrolyzers

For proton-exchange membrane (PEM) water electrolyzers to be commercially feasible, PEMs must perform over long lifetimes in liquid environments under compression while maintaining mechanical stability. A hydrated environment, while inherent for operation and conductivity, undermines PEM stability. Mechanical stability of PEMs is commonly characterized in tension, which is not applicable to electrolyzers, wherein PEMs could undergo high pressures. In this study, a compression creep procedure is developed using a custom-designed setup to monitor creep response of hydrated PEMs. Furthermore, our results show that PEMs exhibit continuous creep response under compression over 24 h, with a dependence on the applied pressure and hydration state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pathway to High Rate Capability in Interconnected Composite Electrolytes: A Case Study with a Single-Ion-Conducting Polymer

In a three-dimensional interconnected polymer/ceramic composite electrolyte (3D composite), both the polymer and ceramic electrolyte phases are individually connected with a polymer-rich surface layer to provide conformal contact with the electrodes. This work investigates how the transference number of the polymer phase affects the electrochemical properties of the 3D composite. Here, we fabricate a 3D composite using a “single-ion” conducting polymer electrolyte (PE), Li 1+x+y Al x Ti 2–x Si y P 3–y O 12 (LICGC) ceramic, and compare its electrochemical properties with the neat polymer, and with a 3D composite made with a dual-ion-conducting PE (we reported previously). Our results reveal that changing the polymer phase from a dual-ion-conducting PE to a single-ion-conducting PE results in a 9-fold increase in the limiting current density, although the interfacial impedance between the polymer and LICGC ceramic remains high (and contributes significantly to the total impedance of the 3D composite). Further, the limiting current density of the 3D composite is dictated by the PE and minimally affected by the ceramic scaffold. The ceramic scaffold, however, helps to ease the concentration gradient buildup within the PE and moderately improves the overall transference number. The LICGC scaffold does not provide any additional Li dendrite resistance due to its high reactivity with Li.

25 ENERGY STORAGE↗
DOE OSTI2020

Transition-Metal Dissolution from NMC-Family Oxides: A Case Study

In this work we investigated the static reactions of highly delithiated Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 , Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 , and Li(Ni 0.8 Mn 0.1 Co 0.1 )O 2 positive electrodes with 2,3-butanedione and with tetrabutyl ammonium bifluoride as model leaching agents. In the bifluoride trials, it was found that [Ni] in the leachate was proportional to X Co ( X Ni ) 3 , where X M is the ideal stoichiometry in the bulk oxide, and inversely proportional to ( X Mn ) 2 ; [Mn] to X Co ( X Ni ); and [Co] to X Co . The relationships between metal concentrations and stoichiometry may indicate that nickel, as a next-nearest neighbor on the positive electrode surface, can make dissolution more favorable in some instances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Inorganic Sulfur Species Formed upon Heterogeneous OH Oxidation of Organosulfates: A Case Study of Methyl Sulfate

In this report recent studies reveal that organosulfates at the particle surface can be oxidized by gas-phase OH radicals with significant rates. Inorganic sulfur species, such as the bisulfate ion (HSO 4 - ) and sulfate ion (SO 4 2- ), can be formed upon these heterogeneous oxidation processes through the formation and subsequent reactions of sulfate radical anions (SO 4 •- ) in the particle phase. However, the amount of inorganic sulfur species produced in these heterogeneous oxidation reactions is not known. We investigate the heterogeneous OH oxidation of sodium methyl sulfate (CH 3 SO 4 Na), the smallest organosulfate detected in atmospheric particles, using an oxidation flow reactor at a relative humidity of 75%. We quantify the kinetics by measuring the decay of CH 3 SO 4 Na and the amount of HSO 4 - and SO 4 2- formed upon oxidation using ion chromatography. Kinetic measurements determine the heterogeneous OH reaction rate to be (5.72 ± 0.14) x 10 -13 cm 3 molecule -1 s -1 , with an effective OH uptake coefficient, γ eff , of 0.31 ± 0.06. The molar yield of inorganic sulfur species, defined as the total number of moles of HSO 4 - and SO 4 2- formed per mole of CH 3 SO 4 Na consumed upon oxidation, is found to be significant and has an average value of 0.62 ± 0.18 upon oxidation. A kinetic model is developed to describe the kinetics and inorganic sulfur species formation upon oxidation. Model simulations suggest that CH 3 SO 4 Na tends to decompose rapidly into formaldehyde and SO 4 •- , and the reaction of SO 4 •- with CH 3 SO 4 Na plays a significant role in both governing the kinetics and the formation of inorganic sulfur species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Deciphering the source of primary biological aerosol particles: a pollen case study

Primary biological aerosol particles (PBAPs) are microscopic solids suspended in the atmosphere emitted by biological systems and play critical roles in the atmosphere and at the atmosphere-biosphere interface, impacting human health, climate, and the ecosystem function. Understanding the sources of PBAPs is necessary to decipher the mechanistic interactions between aerosols, climate, and distinct ecosystem components. However, the detection of specific PBAPs in complex ambient aerosol samples is challenging. We performed metabolomics analyses of pollen from three pollinating tree species and ambient samples collected during the peak pollination period of each species. Random Forest and sPLS-DA machine learning methods were employed to evaluate whether metabolic signatures of ambient samples can reveal the source of the main pollen particles present in the atmosphere. Our results suggest that atmospheric eco-metabolomics techniques combined with sophisticated statistical methods can decipher the origin of abundant PBAPs from complex ambient samples. Developing complete libraries containing high-resolution metabolomic fingerprints of the major PBAPs present in the atmosphere would significantly advance future research to accurately understand the role of PBAPs in the atmosphere, ecosystems and human health.

Rivas-Ubach, Albert↗
DOE OSTI2023

Influence of Application Method on Disinfectant Byproduct Formation during Indoor Bleach Cleaning: A Case Study on Phenol Chlorination

Modern disinfection methods increasingly utilize droplet dispersal as a means of delivering disinfectant within an indoor space. Such an application produces droplets over wide size ranges, some of which may remain airborne for minutes to hours while serving as small reaction environments. We report here the formation of chlorophenolic disinfection byproducts (DBPs) during the injection of bleach microdroplets into an environmental chamber. These reactions within airborne microdroplets are driven by phenol dissolution and availability, and the observed DBPs span multiple generations of chlorination chemistry. DBPs representing successive chlorine addition to the phenol ring are initially observed (mono-, di-, and trichlorophenol), followed by DBPs that lack aromaticity (2,6-dichlorobenzoquinone and 2,4,4,6-tetrachloro-2,5-cyclohexadienone, among others). Chlorophenolic DBPs have not been reported during prior work examining indoor bleach cleaning and we attribute their observation in this work to the dispersal of disinfectant microdroplets rather than traditional mopping or wiping with a bulk aqueous solution on an indoor surface. Airborne microdroplets represent unique reaction and volatilization environments and unique exposure pathways to DBPs, via direct compound inhalation as well as the inhalation of DBP-containing microdroplets. The observed DBPs (particularly 2,6-dichlorobenzoquinone) have previously been linked to adverse health effects in humans through either direct toxicity or as precursors to other DBPs with adverse health effects. In conclusion, these measurements suggest that more work is needed to understand potential DBP formation and human exposure within a variety of indoor environments where disinfection techniques that generate airborne microdroplets are used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pipe Parity Analysis of Seawater Desalination in the United States: Exploring Costs, Energy, and Reliability via Case Studies and Scenarios of Emerging Technology

As climate change-induced variables exacerbate water scarcities, the use of seawater reverse osmosis (SWRO) membrane desalination technology for treating seawater could potentially provide a long-term drought-proof source of drinking water. This study carried out a technoeconomic assessment (TEA) for three SWRO desalination plants in the U.S. and one in Israel to set baselines for the cost and energy consumption for seawater desalination. In addition, a breakeven curve for implementing SWRO desalination was estimated in relation to the cost of water conservation measures to meet drought-induced reduction of the traditional water supply. The results show that the cost of SWRO water production scales with the plant capacity while energy intensity is not dramatically different across the plants. The higher cost in some U.S. plants is due to high capital investment, including land acquisition and permitting. Variations in plant capacity utilization have the greatest impact on the levelized cost of water (LCOW) over the plant service life, suggesting the importance of reducing fouling and maintenance-related downtime. Scenario analysis of fixed labor cost reduction through process automation indicates investments in automation and sensing technology could result in long-term savings. Breakeven analysis shows the decision to adopt SWRO is highly dependent on the local cost associated with water conservation to meet water supply reduction. Moreover, a small reduction in SWRO cost can influence a shift toward the adoption of SWRO over water conservation measures. Incorporation of future water demand, water conservation potential, and water stress data around the nation indicates SWRO desalination could be an important contributor to the future municipal drinking water portfolio in the U.S.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Porous Liquids as Electrolyte: A Case Study of Li + and Mg 2+ Ion Transport in Crown Ether-Based Type-II Porous Liquids

Here, we demonstrate crown ether (CE)-based type II porous liquid (PL) electrolytes in which CEs provide internal porosity and are capable of coordinating with Li + and Mg 2+ ions. We investigated the physicochemical properties of the PL electro-lytes with different functional groups and cavity sizes. Among the electrolytes studied, the 12-crown-4 (12C4)-based PL electrolyte exhibited the most enhanced ionic conductivity due to size match between the CE cavity and the Li + ion. Nu-clear magnetic resonance and Fourier transform infrared analyses revealed that addition of CEs reduces the Li + ion–solvent interaction, resulting in the formation of Li-CE complexes. The simulation study clearly showed that the solvated Li + and Mg 2+ ions form complexes with 12C4. The strategy described here using CE-based PLs should be applicable to the design versatile electrolytes for various metal-ion batteries.

Shin, Sun Hae Ra↗
DOE OSTI2024

How Precisely Can Individual Molecules Be Analyzed? A Case Study on Locally Quantifying Forces and Energies Using Scanning Probe Microscopy

Recent advances in scanning probe microscopy methodology have enabled the measurement of tip-sample interactions with picometer accuracy in all three spatial dimensions, thereby providing a detailed site-specific and distance-dependent picture of the related properties. This paper explores the degree of detail and accuracy that can be achieved in locally quantifying probe-molecule interaction forces and energies for adsorbed molecules. Toward this end, cobalt phthalocyanine (CoPc), a promising CO 2 reduction catalyst, was studied on Ag(111) as a model system using low-temperature, ultrahigh vacuum noncontact atomic force microscopy. Data were recorded as a function of distance from the surface, from which detailed three-dimensional maps of the molecule's interaction with the tip for normal and lateral forces as well as the tip-molecule interaction potential were constructed. The data were collected with a CO molecule at the tip apex, which enabled a detailed visualization of the atomic structure. Determination of the tip-substrate interaction as a function of distance allowed isolation of the molecule-tip interactions; when analyzing these in terms of a Lennard-Jones-type potential, the atomically resolved equilibrium interaction energies between the CO tethered to the tip and the CoPc molecule could be recovered. Interaction energies peaked at less than 160 meV, indicating a physisorption interaction. As expected, the interaction was weakest at the aromatic hydrogens around the periphery of the molecule and strongest surrounding the metal center. In conclusion, the interaction, however, did not peak directly above the Co atom but rather in pockets surrounding it.

36 MATERIALS SCIENCE↗