Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attenuator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Effects of perforated flap surfaces and screens on acoustics of a large externally blown flap model

Various model geometries and combinations of perforated flap surfaces and screens mounted close to the flap surfaces were studied for application to jet-flap noise attenuation for externally blown flap, under-the-wing aircraft. The efforts to reduce jet-flap interaction noise were marginally successful. Maximum attenuations of less than 4 db in overall sound pressure level were obtained in the flyover plane. Noise reductions obtained in the low-to-middle-frequency ranges (up to 7 db) were generally offset by large increases in high-frequency noise (up to 20 db).

Burns, R. J.↗
NASA NTRS1975

Methods for correcting microwave scattering and emission measurements for atmospheric effects

The author has identified the following significant results. Algorithms were developed to permit correction of scattering coefficient and brightness temperature for the Skylab S193 Radscat for the effects of cloud attenuation. These algorithms depend upon a measurement of the vertically polarized excess brightness temperature at 50 deg incidence angle. This excess temperature is converted to an equivalent 50 deg attenuation, which may then be used to estimate the horizontally polarized excess brightness temperature and reduced scattering coefficient at 50 deg. For angles other than 50 deg, the correction also requires use of the variation of emissivity with salinity and water temperature.

Komen, M.↗
NASA NTRS1976

Computer method for design of acoustic liners for turbofan engines

A design package is presented for the specification of acoustic liners for turbofans. An estimate of the noise generation was made based on modifications of existing noise correlations, for which the inputs are basic fan aerodynamic design variables. The method does not predict multiple pure tones. A target attenuation spectrum was calculated which was the difference between the estimated generation spectrum and a flat annoyance-weighted goal attenuated spectrum. The target spectrum was combined with a knowledge of acoustic liner performance as a function of the liner design variables to specify the acoustic design. The liner design method at present is limited to annular duct configurations. The detailed structure of the liner was specified by combining the required impedance (which is a result of the previous step) with a mathematical model relating impedance to the detailed structure. The design procedure was developed for a liner constructed of perforated sheet placed over honeycomb backing cavities. A sample calculation was carried through in order to demonstrate the design procedure, and experimental results presented show good agreement with the calculated results of the method.

Minner, G. L.↗
NASA NTRS1975

Optimization of duct acoustic liners of finite length

Lining design procedures generally ignore the effects of discontinuous impedance changes on reflection and modal redistribution of incident energy. The present study involves identification of the mechanisms of optimal suppression by segmented liners, including impedance discontinuity effects. The mathematical model involves rectangular ducts in the absence of mean flow. Segmented acoustic fields are represented by duct eigenfunction expansions, and mode matching is used to ensure continuity of the total field. Extensive parameter studies were used to identify attenuation mechanisms and to define preliminary liner configurations. These are used as starting values in conjugate-gradient optimization studies. Optimal segmented liners are presented and it is shown that, if the sound source is sufficiently well-defined, conventional infinite duct optimum attenuation rates can be improved upon by taking advantage of wall impedance discontinuities. Finally, follow-on work which will involve experimental verification and extension to the case with mean flow in the duct is described.

Beckemeyer, R. J.↗
NASA NTRS1975

A search for molecular hydrogen fluorescence near 100 km

The fluorescence of H2 in the Lyman band system, excited by solar extreme ultraviolet radiation, provides a means for the optical detection of H2 in the upper atmosphere. In particular, the Ly beta line of hydrogen is nearly degenerate with the (6,0) P1 transition, and absorption in this line produces fluorescence in the v-prime = 6 progression, principally at 1265, 1366, 1462 and 1608 A. Absorption by O2 rapidly attenuates the Ly beta from an overhead sun below 100 km and also significantly attenuates the fluorescent radiation. Far-ultraviolet dayglow spectra from 1130 to 1510 A obtained from an Aerobee rocket experiment on 11 December 1972 give an upper limit for any H2 emission which is a factor of 5 higher than expected according to recent hydrogen models.

Feldman, P. D.↗
NASA NTRS1975

The Comsat 13 and 18 GHz propagation experiment

The ATS-6 Comsat Propagation Experiment, designed to gather statistical data on attenuation by rain and snow at 13 and 18 GHz, is discussed. Signals from unattended ground transmitters at 25 locations in the eastern U.S. operating at 18 GHz and 13 GHz were transmitted to ATS-6, where the transponder converted the carriers to frequencies around 4150 MHz. These signals were then transmitted to the Comsat large horn antenna/data acquisition and receiving facility at Bangor, Maine, where each carrier was calibrated and digitally recorded once per second. Attenuation statistics for 40 carriers have been plotted. The experiment was conducted from July 1974 to May 1975 with excellent performance of the transponder.

King, J. L.↗
NASA NTRS1975

Acoustic systems containing curved duct sections

The analysis of waves in bends in acoustical ducting of rectangular cross section is extended to the study of motion near discontinuities. This includes determination of the characteristics of the tangential and radial components of the non-propagating modes. It is established that attenuation of the non-propagating modes strongly depends on frequency and that, in general, the sharper the bend, the less attenuation may be expected. Evaluation of a bend's impedance and of impedance-generated reflections is also presented in detail.

Rostafinski, W.↗
NASA NTRS1976

Reduction of losses in low-frequency /2 MHz/ surface-wave delay line by outgassing

Surface waves are attenuated by a fluid or gas surrounding the surface of propagation, an effect caused by frictional losses determined by the fluid or gas viscosity and by the emission of compression waves into the environment. The paper reports a large reversible reduction in attenuation of surface waves at frequencies as low as 2 MHz by outgassing treatments of some materials, suggesting that at such frequencies vacuum encapsulation is a desirable procedure. Outgassing experiments were performed on a delay line constructed from high-density p.z.t.-8 (lead-zirconate-titanate). The delay line configuration was a slab waxed onto a metal base with coaxial connectors mounted near and connected by gold-wire leads to the interdigital finger sets. Output signal enhancements by as much as 8 dB were achieved after overnight evacuation at 10 to the -2 torr at room temperature.

Tittmann, B. R.↗
NASA NTRS1978

Neutron radiographic testing for hydrogen embrittlement

Neutron radiography (N-ray) inspection is similar to X-ray inspection in that both depend on variations in attenuation to achieve object contrast. However, effectiveness of methods differs significantly when certain combinations of elements are examined. Mass attenuation coefficient for N-rays is function of both scattering and capture possibilities for each element; thus, density of thickness of material is less important in determining its transparency to neutrons.

Dunstan, J.↗
NASA NTRS1976

Low-frequency noise reduction of lightweight airframe structures

The results of an experimental study to determine the noise attenuation characteristics of aircraft type fuselage structural panels were presented. Of particular interest was noise attenuation at low frequencies, below the fundamental resonances of the panels. All panels were flightweight structures for transport type aircraft in the 34,050 to 45,400 kg (75,000 to 100,000 pounds) gross weight range. Test data include the results of vibration and acoustic transmission loss tests on seven types of isotropic and orthotropically stiffened, flat and curved panels. The results show that stiffness controlled acoustically integrated structures can provide very high noise reductions at low frequencies without significantly affecting their high frequency noise reduction capabilities.

Getline, G. L.↗
NASA NTRS1977

Experimental study of outdoor propagation of spherically speading periodic acoustic waves of finite amplitude

The outdoor propagation of spherically spreading sound waves of finite amplitude was investigated. The main purpose of the experiments was to determine the extent to which the outdoor environment, mainly random inhomogeneity of the medium, affects finite amplitude propagation. Periodic sources with fundamental frequencies in the range 6 to 8 kHz and source levels SPLlm from 140 to 149 dB were used. The sources were an array of 7 to 10 horn drivers and a siren. The propagation path was vertical and parallel to an 85 m tower, whose elevator carried the traveling microphone. The general conclusions drawn from the experimental results were as follows. The inhomogeneities caused significant fluctuations in the instantaneous acoustic signal, but with sufficient time averaging of the measured harmonic levels, the results were comparable to results expected for propagation in a quiet medium. Propagation data for the fundamental of the siren approached within 1 dB of the weak shock saturation levels. Extra attenuation on the order of 8 dB was observed. The measurements generally confirmed the predictions of several theoretical models. The maximum propagation distance was 36 m. The narrowbeam arrays were much weaker sources. Nonlinear propagation distortion was produced, but the maximum value of extra attenuation measured was 1.5 dB. The maximum propagation distance was 76 m. The behavior of the asymetric waveforms received in one experiment qualitatively suggested that beam type diffraction effects were present. The role of diffraction of high intensity sound waves in radiation from a single horn was briefly investigated.

Theobald, M. A.↗
NASA NTRS1977

Increase in effectiveness of low frequency acoustic liners by use of coupled Helmholtz resonators

Coupling of Helmholtz resonators in a low-frequency absorber array was studied as a means for increasing the effectiveness for absorbing low-frequency core engine noise. The equations for the impedance of the coupled-resonator systems were developed in terms of uncoupled-resonator parameters, and the predicted impedance for a parallel-coupled scheme is shown to compare favorably with measurements from a test model. In addition, attenuation measurements made in a flow duct on test coupled-resonator panels are shown to compare favorably with predicted values. Finally, the parallel-coupled concept is shown to give significantly more attenuation than that of a typical uncoupled resonator array of the same total volume.

Dean, L. W.↗
NASA NTRS1977

Heating of the lower thermosphere by the dissipation of acoustic waves

Infrasound of 0.2 Hz known as microbaroms, generated by interfering ocean waves, propagates into the lower thermosphere where it is dissipated between 110 and 140 km. It is shown here that under average conditions in winter the energy input into this region is of the order of 0.33 W/kg, the same as that estimated for gravity wave dissipation, and capable of producing a heating of at least 30 K/day. To arrive at this result different dissipation mechanisms are discussed, with the calculated attenuation compared to previously published observations and observations of natural infrasound at Palisades, N.Y. Increased acoustic attenuation due to the presence of turbulence is not, in general, in evidence.

Rind, D.↗
NASA NTRS1977

Microwave absorption characteristics of the clouds of Venus from Mariner 10 radio occultation

Measurements of received signal strength at S-band (13 cm) and X-band (4.8 cm) wavelengths during the radio occultation of Mariner 10 by Venus on February 5, 1974, are examined in order to study the structure and composition of the absorbing medium. The frequency excursions of the signals are determined and used to obtain the structure of the refractive index in the lower atmosphere. Profiles of excess signal attenuation due to atmospheric scattering and absorption are presented which indicate that the X-band signal experienced much more absorption and was extinguished at about 50 km, while the S-band signal penetrated to about 42 km. The optical-depth data are inverted by means of a discrete inversion method to obtain the absorption coefficient for each band as a function of height, and the resulting absorption-coefficient profiles are compared with the attenuation at vertical incidence modeled from planetary radar and passive microwave observations of Venus. The absorption coefficients at the two wavelengths are employed to estimate the liquid content and composition of the microwave-absorbing cloud particles.

Kliore, A. J.↗
NASA NTRS1977

An empirical model for inverted-velocity-profile jet noise prediction

An empirical model for predicting the noise from inverted-velocity-profile coaxial or coannular jets is presented and compared with small-scale static and simulated flight data. The model considered the combined contributions of as many as four uncorrelated constituent sources: the premerged-jet/ambient mixing region, the merged-jet/ambient mixing region, outer-stream shock/turbulence interaction, and inner-stream shock/turbulence interaction. The noise from the merged region occurs at relatively low frequency and is modeled as the contribution of a circular jet at merged conditions and total exhaust area, with the high frequencies attenuated. The noise from the premerged region occurs at high frequency and is modeled as the contribution of an equivalent plug nozzle at outer stream conditions, with the low frequencies attenuated.

Stone, J. R.↗
NASA NTRS1978

Wind tunnel evaluation of YF-12 inlet response to internal airflow disturbances with and without control

The response of terminal-shock position and static pressures in the subsonic duct of a YF-12 aircraft flight-hardware inlet to perturbations in simulated engine corrected airflow were obtained with and without inlet control. Frequency response data, obtained with inlet controls inactive, indicated the general nature of the inherent inlet dynamics, assisted in the design of controls, and provided a baseline reference for responses with active controls. All the control laws were implemented by means of a digital computer that could be programmed to behave like the flight inlet's existing analog control. The experimental controls were designed using an analytical optimization technique. The capabilities of the controls were limited primarily by the actuation hardware. The experimental controls provided somewhat better attenuation of terminal shock excursions than did the YF-13 inlet control. Controls using both the forward and aft bypass systems also provided somewhat better attenuation than those using just the forward bypass. The main advantage of using both bypasses is in the greater control flexibility that is achieved.

Cole, G. L.↗
NASA NTRS1978

Recent advances concerning an understanding of sound transmission through engine nozzles and jets

Experiments on the interaction between a turbulent jet and pure tone sound coming from inside the jet nozzle are reported. This is a model representing the sound transmission from sound sources in jet engines through the nozzle and the jet flow into the far field. It is shown that pure tone sound at low frequencies is considerably attenuated by the jet flow, whereas it is conserved at higher frequencies. On the other hand, broadband jet noise can be amplified considerably by a pure tone excitation. Both effects seem not to be interdependent. Knowledge on how they are created and on relevant parameter dependences allow new considerations for the development of sound attenuators.

Bechert, D.↗
NASA NTRS1978

Tissue identification by ultrasound

The ultrasonic properties of animal and human soft tissue were measured over the frequency range of 1.5 to 10.0 MHz. The method employed a swept-frequency, coherent technique known as time delay spectrometry. Measurements of attenuation versus frequency on liver, backfat, kidney, pancreas, spleen, breast, and other tissue were made. Considerable attention was paid to tissue handling and in determining the effects of fixing on the attenuation of ultrasound in the tissue.

Lecroissette, D. H.↗