Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier

Mixed-halide wide-band-gap perovskites are critical components of highly efficient tandem cells, but their operating stability is limited by halide migration. Metal oxides deposited via atomic layer deposition (ALD) have been shown to block halide migration; however, previously pursued methods result in inhomogeneous nucleation and growth. We hypothesized that functionalizing the perovskite surface with ALD-active carboxyl groups could promote nucleation and enable higher-temperature metal oxide growth. We find that 5-ammonium valeric acid iodide (5-AVAI) facilitates the formation of a compact and uniform aluminum oxide (Al 2 O 3 ) layer and allows growth at 100°C compared with the previous limit of 75°C. We demonstrate that halide migration into the C 60 electron transport layer is reduced by a factor of 10 compared with the reference case. Finally, Al 2 O 3 -capped perovskite solar cells with a band gap of 1.78 eV retain 90% of their initial power conversion efficiency after 1,000 h of continuous operation under 1-sun illumination at 55°C.

Al2O3↗
DOE OSTI2022

Sulphur variations in annually layered stalagmites using benchtop micro-XRF

Variation of sulphur in annually laminated stalagmites can be used to infer the impact of past volcanic activities, anthropogenic pollution, and climate change due to increased bushfire activity. The synchrotron radiation micro-X-Ray fluorescence (SR-XRF) microprobe is a powerful tool to analyse and image sulphur recorded in stalagmites with micrometre resolution. However, access to SR-XRF beamlines can be limited, so researchers must select the most promising stalagmites for imaging. Benchtop micro-XRF is an effective tool for trace elemental analysis of speleothem samples and is a candidate for routine laboratory measurement of sulphur along stalagmite laminae and screening for SR-XRF. Here, this study describes a protocol using matrix-matched standards to measure annual variations of sulphur at trace to percent level along the laminae of two Western Australian stalagmites, one of which already having been analysed using SR-XRF. Parameters that affected quantitation include X-ray tube voltage and current, spot size of the X-ray beam and stalagmite surface roughness and porosity. The use of a 20 μm X-ray spot size provides sub-annual spatial resolution that can be completed in an overnight scan. The features in a 1000 point micro-XRF analysis of sulphur along a 20 mm transect show good consistency with SR-XRF microprobe data. Micro-XRF mapping was also performed to produce chemical images on the stalagmite and compared with Raman and X-ray diffraction (XRD) to confirm that the stalagmite is exclusively calcite, with no aragonite, and that the source of sulphur in the samples was gypsum and anhydrite. Regions of very high sulphur in the micro-XRF maps were found to be artefacts due to diffraction of the incident beam but these could be efficiently removed by using a multiple point statistics approach to produce a clean image suitable for analysis of the laminae. This work shows the potential of micro-XRF for routine analysis of sulphur in stalagmites, and to streamline sample characterisation before SR-XRF imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cobalt‐Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO 2 Reduction to Electrolyte‐Free Formic Acid

Electrochemical carbon dioxide (CO 2 ) reduction reaction (CO 2 RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO − ) is a promising strategy for carbon neutrality. Enhancing CO 2 RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO 2 RR performance compared to pristine Bi, achieving ~90 % HCOO − selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm −2 . In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm −2 , generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO 2 , due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. In conclusion, this study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO 2 RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Boundary-Layer Gradients in New Particle Formation Field Campaign Report

Atmospheric new particle formation (NPF) followed by growth of the particles to ~50-150 nm is estimated to account for over 50% of the particles that can activate cloud droplets. As such, NPF and the subsequent growth plays a critical role in our ability to understand how aerosols affect cloud life cycle, properties, and processes and more generally the Earth’s radiative balance. NPF and growth is known to occur throughout the troposphere including in both the boundary layer and the free troposphere. The majority of NPF and growth observations, however, come from surface-based measurements within the boundary layer. Measurements of the vertical distribution of NPF and growth are sparse and thus insufficient to test many of the hypotheses that attempt to explain connections between NPF and boundary-layer transport and meteorology. The purpose of this campaign was to investigate the vertical distribution of NPF and growth at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Atomic Layer Deposition for Enhanced Reactivity and Stability of Biomass Conversion Catalysts

Heterogeneous catalysts are an essential tool in the transition towards a sustainable, bio-based economy for fuels and chemicals. However, the harsh conditions (e.g., high temperatures, acidity, oxidizing/reducing environments) of many key biomass conversion processes give rise to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Active site poisoning due to the relatively high sulfur content of most biomass feedstocks further compounds these durability problems. Next-generation catalysts must be developed to address these stability challenges. In this work, we used a scalable atomic layer deposition (ALD) process to modify conventional Pd-based hydrogenation catalysts to generate significant performance improvements. TiO2 ALD coatings were found to increase the activity of Pd/Al2O3 catalysts towards naphthalene hydrogenation; additionally, these coatings improved the catalyst's resistance to sulfur poisoning and thermal stability under oxidative calcination. Additional work in which Al2O3 ALD coatings were applied to Pd/TiO2 catalysts for muconic acid hydrogenation found similar stability benefits, including improved resistance to Pd leaching in the acidic environment. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of applying ALD coatings to supported Pd hydrogenation catalysts.

ALD↗
DOE OSTI2020

Boosting energy efficiency of Li-rich layered oxide cathodes by tuning oxygen redox kinetics and reversibility

In developing electrode materials for next-generation Li-ion batteries, significant efforts have been given to the energy, power density and cycling stability, with much less (if any) attention paid to the energy efficiency – arguably, the most important practical measure for large-scale applications. This is particularly true for the oxygen-redox active electrodes, such as Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , the notorious energy-inefficient cathode that has an extremely high capacity but comes with large voltage hysteresis and voltage decay. Herein, we report the rational design of an energy-efficient Li-rich layered cathode along with high energy, power density and cycling stability enabled by tuning oxygen redox activity. Specifically, the target material Li 1.12 Ni 0.22 Co 0.13 Mn 0.52 O 2 exhibits an ultrahigh energy efficiency at 1 C (90.6%), high capacity (> 200 mAh g -1 ) with 98.9% retention and less than 150 mV decay at the extended 200 cycles. Overall, through direct comparison between the material and Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , we show that the compositional change, although slightly, greatly improves the oxygen redox kinetics and reversibility, thereby boosts energy efficiency. The findings offer a strategy to narrow the gap between scientific interest and practical application of oxygen-redox chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Boosting Hydrogen Evolution in Neutral Medium by Accelerating Water Dissociation with Ru Clusters Loaded on Mo 2 CTx MXene

Abstract Electrocatalytic hydrogen evolution reaction (HER) in mild neutral medium is a compelling goal for environmentally sustainable energy conversion, but its development is greatly limited by slow kinetics. Platinum group noble metals exhibit ultra‐high HER activities, but their scarcity and performance instability restrict wide application. Herein, taking advantage of excellent catalyst carrier properties of 2D‐layered transition metal carbides (MXenes), highly dispersed of Ru clusters anchored on Mo 2 CT x MXene are demonstrated as a superior HER electrocatalyst, which is prepared by a facile in situ reduction strategy. The as‐prepared Ru/Mo 2 CT x catalyst exhibits a very low overpotential of 73 mV to achieve a current density of −10 mA cm −2 and Tafel slope of 57 mV dec −1 in neutral medium, surpassing performance of most previously reported MXene‐based catalysts. In addition, Ru/Mo 2 CT x catalyst also presents superior stability compared to commercial Pt/C. Experimental results and theoretical calculations indicate that the interaction between Ru clusters modulates the electronic structure of active sites and promotes H 2 O dissociation and hydrogen desorption.

Wu, Yanze↗
DOE OSTI2026

How Silica Surface Chemistry Modulates Interfacial Water: Insights from Machine Learning Molecular Dynamics

Controlling water structure and dynamics at silica interfaces are central to a wide range of technologies, including protective oxide layers for solar water splitting and nanoporous membranes. In this work, we develop a machine learning interatomic potential, trained via active learning, to achieve ab initio accuracy for water confined between hydroxylated silica surfaces over a range of silanol coverages and slit widths. We find that partially hydroxylated surfaces (50 and 75% OH) support stronger water−surface hydrogen bonding and more extended interfacial density profiles than fully hydroxylated (100% OH) surfaces, indicating that increasing OH coverage does not necessarily strengthen interfacial hydrogenbond networks. Translational diffusion decreases approximately linearly with slit width and OH coverage, whereas rotational dynamics respond nonlinearly. In particular, at the smallest slit width of 5 Å, 75% OH coverage produces an enhanced local tetrahedral ordered interfacial network that strongly suppresses reorientation, while 100% coverage yields a crowded, disordered interfacial layer that also hinders rotation. In contrast, the 50% OH coverage is sufficiently sparse that it does not markedly alter water structure or dynamics under confinement. These results show that coupled control of pore size and surface chemistry enables nonlinear tuning of interfacial water structure and transport, providing a design strategy for optimizing porous silica for either enhanced interfacial stability and controlled reactivity or rapid and selective transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Efficient electrocatalytic conversion of CO 2 to ethanol enabled by imidazolium-functionalized ionomer confined molybdenum phosphide

An effective electrochemical carbon dioxide reduction reaction (eCO 2 RR) requires the discovery of a catalytic system that is highly active and selective for multi-carbon products together with superior CO 2 diffusion at a catalyst layer to minimize the reduction barriers. Here, we found a catalytic system that uses molybdenum phosphide (MoP) nanoparticles covered by imidazolium-functionalized ionomer (Im) that promotes CO 2 diffusion at the catalyst layer toward the catalyst surface, where CO 2 is reduced to ethanol (C 2 H 5 OH). The electrochemical results with the MoP-Im co-catalyst show a C 2 H 5 OH production Faradaic efficiency and a cathodic energy efficiency of 77.4% and 63.3%, respectively, at a potential as low as - 200 mV vs. RHE. The electrochemical experiments along with our physicochemical characterizations indicate that the Im improves CO 2 diffusion and balances water content resulting in a higher CO 2 -to-water ratio at the catalyst layer and fine-tunes the electronic properties of Mo atoms at the MoP surface. Finally, in-situ Raman spectroscopy reveals that a high number of adsorbed *CO intermediates on the surface and a higher binding strength of *CO intermediates on the Mo surface sites in the presence of imidazolium molecules are the main reasons for a superior C-C coupling and thereby the improved C 2 H 5 OH formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Effects of Phosphate Impurity on Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material via a Hydrometallurgy Method

From portable electronics to electric vehicles, lithium-ion batteries have been deeply integrated into our daily life and industrial fields for a few decades. The booming field of battery manufacturing could lead to shortages in resources and massive accumulation of battery waste, hindering sustainable development. Therefore, hydrometallurgy-based approaches have been widely used in industrial recycling to recover cathode materials due to their high efficiency and throughput. Further, impurities have always been a great challenge for hydrometallurgical recycling, introducing challenges to maintain the consistency of product quality because of potential unintended effects caused by impurities. Herein, after comprehensive investigation, we first report the impacts of phosphate impurity on a recycled LiNi 0.6 Co 0.2 Mn 0.2 O 2 ("NCM622") cathode via a hydrometallurgy method. We demonstrate that a passivation layer of Li 3 PO 4 is formed at grain boundaries during sintering, which significantly raises the activation barrier and hinders lithium diffusion. In addition, the distinct degradation of cathode electrochemical properties is observed from poor particle morphology and high cation mixing as a result of phosphate impurity. Cathode powders with 1 at. % phosphate impurity retain a capacity of 146 mAh/g after 100 cycles at 0.33C, 6% less than that of a virgin cathode. Furthermore, cathodes with higher phosphate concentrations perform even worse in electrochemical tests. Therefore, phosphate impurities are detrimental to the hydrometallurgical recycling of NCM cathode materials and need to be excluded from the recycling process.

25 ENERGY STORAGE↗
DOE OSTI2025

Dynamic realization of emergent high-dimensional optical vortices

The dimensionality of vortical structures has recently been extended beyond two dimensions, providing additional topological complexity and robustness for high-capacity information processing and turbulence control. The generation of high-dimensional vortical structures has mostly been demonstrated in classical systems through the complex interference of fluidic, acoustic, or electromagnetic waves. However, natural materials rarely support three- or higher-dimensional vortical structures and their physical interactions. Here, we experimentally demonstrate a high-dimensional gradient thickness optical cavity (GTOC) in which the optical coupling of planar metal-dielectric multilayers implements topological interactions across multiple dimensions. At non-trivial topological phases, high-dimensional GTOC induces high-dimensional vortical structures in generalized parameter space in three, four dimensions, and beyond. These emergent high-dimensional vortical structures are observed under electro-optic tomography as optical vortex dynamics in two-dimensional real-space, employing the optical thicknesses of dielectric layers as synthetic dimensions. Our findings hold significant promise for emulating high-dimensional physics and developing active topological photonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Amorphous nickel hydroxide shell tailors local chemical environment on platinum surface for alkaline hydrogen evolution reaction

In analogy to natural enzymes, an elaborated design of catalytic systems with a specifically tailored local chemical environment could substantially improve reaction kinetics, effectively combat catalyst poisoning effect and boost catalyst lifetime under unfavourable reaction conditions. Here we report a unique design of ‘Ni(OH) 2 -clothed Pt-tetrapods’ with an amorphous Ni(OH) 2 shell as a water dissociation catalyst and a proton conductive encapsulation layer to isolate the Pt core from bulk alkaline electrolyte while ensuring efficient proton supply to the active Pt sites. This design creates a favourable local chemical environment to result in acidic-like hydrogen evolution reaction kinetics with a lowest Tafel slope of 27 mV per decade and a record-high specific activity and mass activity in alkaline electrolyte. The proton conductive Ni(OH) 2 shell can also effectively reject impurity ions and retard the Oswald ripening, endowing a high tolerance to solution impurities and exceptional long-term durability that is difficult to achieve in the naked Pt catalysts. Furthermore, the markedly improved hydrogen evolution reaction activity and durability in an alkaline medium promise an attractive catalyst material for alkaline water electrolysers and renewable chemical fuel generation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of water frustration on water oxidation catalysis in the nanoconfined interlayers of layered manganese oxides birnessite and buserite

The role of geometric frustration of water molecules on the rate of water oxidation in the nanoconfined interlayer of manganese-oxide layered materials (birnessite, buserite) is examined in a well-controlled experiment. Calcium buserite is prepared, and used in a split-batch synthetic protocol to prepare calcium birnessite, sodium buserite, and sodium birnessite, and partially dehydrated sodium birnessite. Thus, four samples are prepared in which features effecting catalytic efficiency (defect density, average manganese oxidation state) are controlled, and the main difference is the degree of hydration of the interlayer (two layers of water in buserites vs one layer of water in birnessite). Here, molecular dynamics simulations predict birnessite samples to exhibit geometric water frustration, which facilitates redox catalysis by lowering the Marcus reorganizaiton energy of electron transfer, while buserite samples exhibit traditional intermolecular hydrogen bonding among the two-layer aqeuous region, leading to slower catalytic behavior akin to redox reactions in bulk water. Water oxdiation activity is investigated using chemical and electrochemical techniques, demonstrating and quantifying the role of water frustration in enhancing catalysis. Calculation and experiment demonstrate dehydrated sodium birnessite to be most effective, and calcium buserite the least effective, with a difference in electrocatlytic overpotential of ~750 mV and a ~20-fold difference in turnover number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dual functionality of over-lithiated NMC for high energy silicon-based lithium-ion batteries

Owing to their high specific capacity and suitably low operating potential, silicon-based anodes are an attractive alternative to graphite in next-generation lithium-ion batteries. However, silicon anodes suffer from low initial coulombic efficiency and fast capacity decay, limiting their widespread application. Pre-lithiation strategies are highly appealing to compensate for irreversible active lithium loss and to boost the cell energy density. In this work, we maximize the cell energy density by direct pre-lithiation of the NMC (LiNi 0.5 Mn 0.3 Co 0.2 O 2 ) cathode to Li 1+x NMCO 2 without introducing inactive deadweight to either electrode. First, we demonstrate that Li 1+x NMCO 2 can be synthesized chemically, via reaction between NMC and lithium napthalide, and electrochemically. The NMC cathode is tolerant of a one-time over-lithiation up to 60 mA h g NMC -1 , giving capacity retention on par with untreated NMC in half cell electrochemical cycling. Using synchrotron X-ray absorption spectroscopy (ex situ) and diffraction (in situ), we demonstrate that higher amounts of over-lithiation lead to local structure distortion – driven by transition metal reduction to Jahn–Teller active Mn 3+ and Co 2+ – as well as bulk structural hysteresis during over-lithiation and layer “buckling” that increases the amount of lithium extracted from the structure in the charged state. The Li 1+x NMCO 2 with low-to-moderate over-lithiation capacity (23, 46, and 70 mA h g NMC -1 ) is proven to be a highly effective dual-purpose lithium source and cathode material in full cell tests with a commercially relevant Si–graphite anode. These cells show higher capacity, superior cycle life, and improved coulombic efficiencies when compared to those with stoichiometric NMC cathodes. Finally, this study introduces a new and simple method to pre-lithiate layered transition metal oxide cathodes, opening up new possibilities for the development of high energy density lithium-ion batteries with next-generation anodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Mitigated Dissimilar Mass Transfer with Aluminized RAFM Steels in Flowing PbLi at 650°C

To evaluate dissimilar material interactions in flowing eutectic Pb-16at. %Li between fusion-relevant materials and to establish a maximum operating temperature of future blanket designs, a series of thermal convection loop (TCL) experiments with flowing PbLi have been conducted. Following a 1000-h, 550°C to 650°C TCL experiment, a thin reaction product was observed on the surface of monolithic, high-purity SiC. To identify the source of the observed dissimilar material interaction and to understand the reaction kinetics, an identical 2000-h TCL exposure was conducted, but less reaction of the SiC specimen was observed. Characterization of the FeCrAlMo (alloy APMT) loop tubing and the PbLi-exposed austenitic stainless steel (SS) assembly parts suggested that the formation of the reaction layer on the surface of the PbLi-exposed SiC did not originate from the coated reduced activation ferritic martensitic (RAFM) steel, but from the dissolved loop materials (liquid metal exposed APMT tubing and type 316 SS fittings). Here, the results, after 2000 h, suggest that the dissimilar material reaction between the Al-coated RAFM steel and the SiC has very slow reaction kinetics within a temperature gradient of 550°C to 650°C.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Diverted Negative Triangularity plasmas on DIII–D: The benefit of high confinement without the liability of an edge pedestal

Diverted discharges at negative triangularity on the DIII-D tokamak sustain normalized confinement and pressure levels typical of standard H-mode scenarios (H 98y,2 ≅1, β N ≅3) without developing an edge pressure pedestal, despite the auxiliary power far exceeding the L → H power threshold expected from conventional scaling laws. The power degradation of confinement is substantially weaker than the ITER-89P scaling, resulting in a confinement factor that improves with increasing auxiliary power. Furthermore, the absence of the edge pedestal is beneficial in several aspects, such as eliminating the need for active mitigation or suppression of edge localized modes, low impurity retention and a reconstructed scrape-off layer heat flux width at the mid-plane that exceeds the ITPA multi-machine scaling law by up to 50%. Together with technological advantages granted by placing the divertor at larger radii, plasmas at Negative Triangularity without an edge pedestal feature both core confinement and power handling characteristics that are potentially suitable for operation in future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Super-resolution imaging illuminates new dynamic behaviors of cellulose synthase

Abstract Confocal imaging has shown that CELLULOSE SYNTHASE (CESA) particles move through the plasma membrane as they synthesize cellulose. However, the resolution limit of confocal microscopy circumscribes what can be discovered about these tiny biosynthetic machines. Here, we applied Structured Illumination Microscopy (SIM), which improves resolution two-fold over confocal or widefield imaging, to explore the dynamic behaviors of CESA particles in living plant cells. SIM imaging reveals that Arabidopsis thaliana CESA particles are more than twice as dense in the plasma membrane as previously estimated, helping explain the dense arrangement of cellulose observed in new wall layers. CESA particles tracked by SIM display minimal variation in velocity, suggesting coordinated control of CESA catalytic activity within single complexes and that CESA complexes might move steadily in tandem to generate larger cellulose fibrils or bundles. SIM data also reveal that CESA particles vary in their overlaps with microtubule tracks and can complete U-turns without changing speed. CESA track patterns can vary widely between neighboring cells of similar shape, implying that cellulose patterning is not the sole determinant of cellular growth anisotropy. Together, these findings highlight SIM as a powerful tool to advance CESA imaging beyond the resolution limit of conventional light microscopy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Observation of thermally activated coherent magnon-magnon coupling in a magnonic hybrid system

In this work, we experimentally demonstrate coherent magnon-magnon coupling by thermal spin excitations in yttrium iron garnet/permalloy (YIG/Py) hybrid structures using microfocused Brillouin light scattering—an optical technique that enables the detection of zero-wave-vector and higher-order wave-vector spin waves in a broad frequency range. The thermally activated magnons in the bilayer lead to a hybrid excitation between magnon modes in the conductive Py layer with a wide wave-vector range and the first perpendicular standing magnon modes in the insulating YIG layer, facilitated by strong interfacial exchange coupling. To further investigate this coupling, we compare the thermal magnon spectra with the results obtained from electrical excitation and detection methods, which primarily detect the uniform Py mode. The realization of coherent coupling between incoherent (thermal) magnons is important for advancing energy-efficient magnonic devices, particularly in classical as well as quantum spin-wave computing technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗