Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Visible light photocatalytic property of Zn doped V{sub 2}O{sub 5} nanoparticles

The Zn doped V{sub 2}O{sub 5} nanoparticles were synthesized by thermal decomposition method. The prepared samples were characterized by various techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) studies, UV-Visible spectroscopy (UV-Vis) and field emission scanning electron microscopy (FE-SEM). The photocatalytic activities of pure and Zn doped V{sub 2}O{sub 5} nanoparticles were examined based on the photodegradation of Rhodamine B (RhB). Experimental results indicated that the Zn doped V{sub 2}O{sub 5} photocatalyst (the molar ratio of V to Zn is 99: 1) exhibited maximum photocatalytic activity.

36 MATERIALS SCIENCE↗

Low cost alternative of high speed visible light camera for tokamak experiments

We present design, analysis, and performance evaluation of a new, low cost and high speed visible-light camera diagnostic system for tokamak experiments. The system is based on the camera Casio EX-F1, with the overall price of approximately a thousand USD. The achieved temporal resolution is up to 40 kHz. This new diagnostic was successfully implemented and tested at the university tokamak GOLEM (R = 0.4 m, a = 0.085 m, B{sub T} < 0.5 T, I{sub p} < 4 kA). One possible application of this new diagnostic at GOLEM is discussed in detail. This application is tomographic reconstruction for estimation of plasma position and emissivity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A new visible spectroscopy diagnostic for the JET ITER-like wall main chamber

In preparation for ITER, JET has been upgraded with a new ITER-like wall (ILW), whereby the main plasma facing components, previously of carbon, have been replaced by mainly Be in the main chamber and W in the divertor. As part of the many diagnostic enhancements, a new, survey, visible spectroscopy diagnostic has been installed for the characterization of the ILW. An array of eight lines-of-sight (LOS) view radially one of the two JET neutral beam shine through areas (W coated carbon fibre composite tiles) at the inner wall. In addition, one vertical LOS views the solid W tile at the outer divertor. The light emitted from the plasma is coupled to a series of compact overview spectrometers, with overall wavelength range of 380-960 nm and to one high resolution Echelle overview spectrometer covering the wavelength range 365-720 nm. The new survey diagnostic has been absolutely calibrated in situ by means of a radiometric light source placed inside the JET vessel in front of the whole optical path and operated by remote handling. The diagnostic is operated in every JET discharge, routinely monitoring photon fluxes from intrinsic and extrinsic impurities (e.g., Be, C, W, N, and Ne), molecules (e.g., BeD, D{sub 2}, ND) and main chamber and divertor recycling (typically D{alpha}, D{beta}, and D{gamma}). The paper presents a technical description of the diagnostic and first measurements during JET discharges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Visible photoluminescence in polycrystalline terbium doped aluminum nitride (Tb:AlN) ceramics with high thermal conductivity

Thermal management continues to be one of the major challenges in the development of high powered light sources such as solid state lasers. In particular, the relatively low thermal conductivity of standard photoluminescent (PL) materials limits the overall power output and/or duty cycle. We present a method based on current activated pressure assisted densification for the fabrication of high thermal conductivity PL materials: rare earth doped polycrystalline bulk aluminum nitride. Specifically, the ceramics are translucent and are doped with Tb{sup 3+}, allowing for emission in the visible. Remarkably, the ceramics have a room temperature thermal conductivity of 94 W/(m K) which is almost seven times higher than that of the state of the art host material, Nd-doped yttrium aluminum garnet. These light emitting properties coupled with very high thermal conductivity should enable the development of a wide variety of more powerful light sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Helium plasma implantation on metals: Nanostructure formation and visible-light photocatalytic response

It has been found recently that low-energy helium (He) plasma irradiation to tungsten (W) leads to the growth of W nanostructures on the surface. The process to grow the nanostructure is identified as a self-growth process of He bubbles and has a potential to open up a new plasma processing method. Here, we show that the metallic nanostructure formation process by the exposure to He plasma can occur in various metals such as, titanium, nickel, iron, and so on. When the irradiation conditions alter, the metallic cone arrays including nanobubbles inside are formed on the surface. Different from W cases, other processes than growth of fiberform structure, i.e., physical sputtering and the growth of large He bubbles, can be dominant on other metals during irradiation; various surface morphology changes can occur. The nanostructured W, part of which was oxidized, has revealed a significant photocatalytic activity under visible light (wavelength >700 nm) in decolorization of methylene blue without any co-catalyst.

36 MATERIALS SCIENCE↗

Development of high-speed and wide-angle visible observation diagnostics on Experimental Advanced Superconducting Tokamak using catadioptric optics

A new wide-angle endoscope for visible light observation on the Experimental Advanced Superconducting Tokamak (EAST) has been recently developed. The head section of the optical system is based on a mirror reflection design that is similar to the International Thermonuclear Experimental Reactor-like wide-angle observation diagnostic on the Joint European Torus. However, the optical system design has been simplified and improved. As a result, the global transmittance of the system is as high as 79.6% in the wavelength range from 380 to 780 nm, and the spatial resolution is <5 mm for the full depth of field (4000 mm). The optical system also has a large relative aperture (1:2.4) and can be applied in high-speed camera diagnostics. As an important diagnostic tool, the optical system has been installed on the HT-7 (Hefei Tokamak-7) for its final experimental campaign, and the experiments confirmed that it can be applied to the investigation of transient processes in plasma, such as ELMy eruptions in H-mode, on EAST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic layer deposition of photoactive CoO/SrTiO{sub 3} and CoO/TiO{sub 2} on Si(001) for visible light driven photoelectrochemical water oxidation

Cobalt oxide (CoO) films are grown epitaxially on Si(001) by atomic layer deposition (ALD) using a thin (1.6 nm) buffer layer of strontium titanate (STO) grown by molecular beam epitaxy. The ALD growth of CoO films is done at low temperature (170–180 °C), using cobalt bis(diisopropylacetamidinate) and water as co-reactants. Reflection high-energy electron diffraction, X-ray diffraction, and cross-sectional scanning transmission electron microscopy are performed to characterize the crystalline structure of the films. The CoO films are found to be crystalline as-deposited even at the low growth temperature with no evidence of Co diffusion into Si. The STO-buffered Si (001) is used as a template for ALD growth of relatively thicker epitaxial STO and TiO{sub 2} films. Epitaxial and polycrystalline CoO films are then grown by ALD on the STO and TiO{sub 2} layers, respectively, creating thin-film heterostructures for photoelectrochemical testing. Both types of heterostructures, CoO/STO/Si and CoO/TiO{sub 2}/STO/Si, demonstrate water photooxidation activity under visible light illumination. In-situ X-ray photoelectron spectroscopy is used to measure the band alignment of the two heterojunctions, CoO/STO and CoO/TiO{sub 2}. The experimental band alignment is compared to electronic structure calculations using density functional theory.

36 MATERIALS SCIENCE↗

Improved visible light driven photoelectrochemical properties of 3C-SiC semiconductor with Pt nanoparticles for hydrogen generation

We propose the n-type 3C-SiC with Pt nanoparticles (Pt NPs) as photo-anode for photoelectrochemical hydrogen (H{sub 2}) generation. We found that band-edge structure of 3C-SiC is suitable for H{sub 2} generation, and the property can be optimized by dopant (nitrogen) concentration in 3C-SiC. We also confirmed that Pt NPs enhance photoelectrochemical properties showing 0.2%–0.8% higher Incident Photon-to-Current Efficiency than bare 3C-SiC in visible wavelength despite diminished light absorption. Solar-conversion efficiency increases approximately 6.3 times, and H{sub 2} production is improved by 6.5 times with 33% of Faradaic efficiency. Lastly, 3C-SiC surface corrosion is effectively inhibited.

36 MATERIALS SCIENCE↗

Visible-light electroluminescence in Mn-doped GaAs light-emitting diodes

We observed visible-light electroluminescence (EL) due to d-d transitions in light-emitting diodes with Mn-doped GaAs layers (here, referred to as GaAs:Mn). Besides the band-gap emission of GaAs, the EL spectra show two peaks at 1.89 eV and 2.16 eV, which are exactly the same as {sup 4}A{sub 2}({sup 4}F) → {sup 4}T{sub 1}({sup 4}G) and {sup 4}T{sub 1}({sup 4}G) → {sup 6}A{sub 1}({sup 6}S) transitions of Mn atoms doped in ZnS. The temperature dependence and the current-density dependence are consistent with the characteristics of d-d transitions. We explain the observed EL spectra by the p-d hybridized orbitals of the Mn d electrons in GaAs.

36 MATERIALS SCIENCE↗

Dispersion properties and low infrared optical losses in epitaxial AlN on sapphire substrate in the visible and infrared range

Optical waveguiding properties of a thick wurtzite aluminum nitride highly [002]-textured hetero-epitaxial film on (001) basal plane of sapphire substrate are studied. The physical properties of the film are determined by X-ray diffraction, atomic force microscopy, microRaman, and photocurrent spectroscopy. The refractive index and the thermo-optic coefficients are determined by m-lines spectroscopy using the classical prism coupling technique. The optical losses of this planar waveguide are also measured in the spectral range of 450–1553 nm. The lower value of optical losses is equal to 0.7 dB/cm at 1553 nm. The optical losses due to the surface scattering are simulated showing that the contribution is the most significant at near infrared wavelength range, whereas the optical losses are due to volume scattering and material absorption in the visible range. The good physical properties and the low optical losses obtained from this planar waveguide are encouraging to achieve a wide bandgap optical guiding platform from these aluminum nitride thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of few-layer 1T-MoSe{sub 2} and its superior performance in the visible-light induced hydrogen evolution reaction

Based on earlier results on the photocatalytic properties of MoS{sub 2}, the 1T form of MoSe{sub 2}, prepared by lithium intercalation and exfoliation of bulk MoSe{sub 2}, has been employed for the visible-light induced generation of hydrogen. 1T-MoSe{sub 2} is found to be superior to both 2H and 1T MoS{sub 2} as well as 2H-MoSe{sub 2} in producing hydrogen from water, the yield being in the 60–75 mmol h{sup −1} g{sup −1} range with a turn over frequency of 15–19 h{sup −1}. First principles calculations reveal that 1T-MoSe{sub 2} has a lower work function than 2H-MoSe{sub 2} as well as 1T and 2H-MoS{sub 2}, making it easier to transfer an electron from 1T-MoSe{sub 2} for the production of H{sub 2}.

36 MATERIALS SCIENCE↗

Enhanced visible and near-infrared capabilities of the JET mirror-linked divertor spectroscopy system

The mirror-linked divertor spectroscopy diagnostic on JET has been upgraded with a new visible and near-infrared grating and filtered spectroscopy system. New capabilities include extended near-infrared coverage up to 1875 nm, capturing the hydrogen Paschen series, as well as a 2 kHz frame rate filtered imaging camera system for fast measurements of impurity (Be II) and deuterium Dα, Dβ, Dγ line emission in the outer divertor. The expanded system provides unique capabilities for studying spatially resolved divertor plasma dynamics at near-ELM resolved timescales as well as a test bed for feasibility assessment of near-infrared spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nano-fabricated pixelated micropolarizer array for visible imaging polarimetry

Pixelated micropolarizer array (PMA) is a novel concept for real-time visible imaging polarimetry. A 320 × 240 aluminum PMA fabricated by electron beam lithography is described in this paper. The period, duty ratio, and depth of the grating are 140 nm, 0.5, and 100 nm, respectively. The units are standard square structures and the metal nanowires of the grating are collimating and uniformly thick. The extinction ratio of 75 and the maximum polarization transmittance of 78.8% demonstrate that the PMA is suitable for polarization imaging. When the PMA is applied to real-time polarization imaging, the degree of linear polarization image and the angle of linear polarization image are calculated from a single frame image. The polarized target object is highlighted from the unpolarized background, and the surface contour of the target object can be reflected by the polarization angle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tuning the plasmon band number of aluminum nanorod within the ultraviolet-visible region by gold coating

The localized surface plasmon (LSP) properties of Al nanorod with Au coating have been investigated by using the quasi-static calculation. Because of the anisotropic plasmon splitting and the plasmon coupling between the Al and Au surfaces, the band number of LSP in the Al-Au core-shell nanorod could be tuned from 2 to 4 continuously in the ultraviolet-visible region. Due to the non-spherical symmetry and the dielectric polarization-induced plasmon energy fading, the Au coating-dependent plasmon shift and split are further affected by the aspect ratio and the dielectric surrounding. When the aspect ratio or the surrounding dielectric constant has a small value, the band number of LSP could only be tuned from 2 to 3. However, the band number of LSP could only be tuned from 3 to 4 when the aspect ratio or the surrounding dielectric constant has a large value. This tunable band number of LSP in the Au-coated Al nanorod provides potential application for multichannel plasmonic nanosensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of visible bremsstrahlung to Z{sub eff} measurement on the Experimental Advanced Superconducting Tokamak

The multi-channel visible bremsstrahlung measurement system has been developed on Experimental Advanced Superconducting Tokamak (EAST). In addition to providing effective ion charge Z{sub eff} as a routine diagnostic, this diagnostic can also be used to estimate other parameters. With the assumption that Z{sub eff} can be seen as constant across the radius and does not change significantly during steady state discharges, central electron temperature, averaged electron density, electron density profile, and plasma current density profile have been obtained based on the scaling of Z{sub eff} with electron density and the relations between Z{sub eff} and these parameters. The estimated results are in good coincidence with measured values, providing an effective and convenient method to estimate other plasma parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultraviolet-visible electroluminescence from metal-oxide-semiconductor devices with CeO{sub 2} films on silicon

We report on ultraviolet-visible (UV-Vis) electroluminescence (EL) from metal-oxide-semiconductor (MOS) devices with the CeO{sub 2} films annealed at low temperatures. At the same injection current, the UV-Vis EL from the MOS device with the 550 °C-annealed CeO{sub 2} film is much stronger than that from the counterpart with the 450 °C-annealed CeO{sub 2} film. This is due to that the 550 °C-annealed CeO{sub 2} film contains more Ce{sup 3+} ions and oxygen vacancies. It is tentatively proposed that the recombination of the electrons in multiple oxygen-vacancy–related energy levels with the holes in Ce 4f{sup 1} energy band pertaining to Ce{sup 3+} ions leads to the UV-Vis EL.

36 MATERIALS SCIENCE↗

Automated laser-based barely visible impact damage detection in honeycomb sandwich composite structures

Nondestructive evaluation (NDE) for detection and quantification of damage in composite materials is fundamental in the assessment of the overall structural integrity of modern aerospace systems. Conventional NDE systems have been extensively used to detect the location and size of damages by propagating ultrasonic waves normal to the surface. However they usually require physical contact with the structure and are time consuming and labor intensive. An automated, contactless laser ultrasonic imaging system for barely visible impact damage (BVID) detection in advanced composite structures has been developed to overcome these limitations. Lamb waves are generated by a Q-switched Nd:YAG laser, raster scanned by a set of galvano-mirrors over the damaged area. The out-of-plane vibrations are measured through a laser Doppler Vibrometer (LDV) that is stationary at a point on the corner of the grid. The ultrasonic wave field of the scanned area is reconstructed in polar coordinates and analyzed for high resolution characterization of impact damage in the composite honeycomb panel. Two methodologies are used for ultrasonic wave-field analysis: scattered wave field analysis (SWA) and standing wave energy analysis (SWEA) in the frequency domain. The SWA is employed for processing the wave field and estimate spatially dependent wavenumber values, related to discontinuities in the structural domain. The SWEA algorithm extracts standing waves trapped within damaged areas and, by studying the spectrum of the standing wave field, returns high fidelity damage imaging. While the SWA can be used to locate the impact damage in the honeycomb panel, the SWEA produces damage images in good agreement with X-ray computed tomographic (X-ray CT) scans. The results obtained prove that the laser-based nondestructive system is an effective alternative to overcome limitations of conventional NDI technologies.

36 MATERIALS SCIENCE↗

Visible wide angle view imaging system of KTM tokamak based on multielement image fiber bundle

In the paper, new visible wide angle view imaging system of KTM tokamak is described. The system has been designed to observe processes inside of plasma and the processes occurring due to plasma-wall interactions through the long equatorial port. Imaging system is designed based on special image fiber bundle and entrance wide angle lens, which provide image of large section of the vacuum chamber, both poloidal half-section and divertor through the sufficiently long equatorial port. The system also consists of two video cameras: slow and fast with image intensifier. Commercial equipment had been used in design of the system that allowed reducing the cost and time for research and development. The paper also discusses advantages and disadvantages of the system in comparison with conventional endoscopes based on a lens system and considers its promising utilization in future tokamaks and future steady state fusion reactors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗