Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Unstructured grids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Verification of the Icarus Material Response Tool

Due to the complex physics encountered during reentry, material response solvers are used for two main purposes: improve the understanding of the physical phenomena; and design and size thermal protection systems (TPS). Icarus, is a three dimensional, unstructured material response tool that is intended to be used for design while maintaining the flexibility to easily implement physical models as needed. Because TPS selection and sizing is critical, it is of the utmost importance that the design tools be extensively verified and validated before their use. Verification tests aim at insuring that the numerical schemes and equations are implemented correctly by comparison to analytical solutions and grid convergence tests.

ablation↗
NASA NTRS1998

Comments on the Diffusive Behavior of Two Upwind Schemes

The diffusive characteristics of two upwind schemes, multi-dimensional fluctuation splitting and locally one-dimensional finite volume, are compared for scalar advection-diffusion problems. Algorithms for the two schemes are developed for node-based data representation on median-dual meshes associated with unstructured triangulations in two spatial dimensions. Four model equations are considered: linear advection, non-linear advection, diffusion, and advection-diffusion. Modular coding is employed to isolate the effects of the two approaches for upwind flux evaluation, allowing for head-to-head accuracy and efficiency comparisons. Both the stability of compressive limiters and the amount of artificial diffusion generated by the schemes is found to be grid-orientation dependent, with the fluctuation splitting scheme producing less artificial diffusion than the finite volume scheme. Convergence rates are compared for the combined advection-diffusion problem, with a speedup of 2.5 seen for fluctuation splitting versus finite volume when solved on the same mesh. However, accurate solutions to problems with small diffusion coefficients can be achieved on coarser meshes using fluctuation splitting rather than finite volume, so that when comparing convergence rates to reach a given accuracy, fluctuation splitting shows a speedup of 29 over finite volume.

Wood, William A.↗
NASA NTRS1998

Diffusion Characteristics of Upwind Schemes on Unstructured Triangulations

The diffusive characteristics of two upwind schemes, multi-dimensional fluctuation splitting and dimensionally-split finite volume, are compared for scalar advection-diffusion problems. Algorithms for the two schemes are developed for node-based data representation on median-dual meshes associated with unstructured triangulations in two spatial dimensions. Four model equations are considered: linear advection, non-linear advection, diffusion, and advection-diffusion. Modular coding is employed to isolate the effects of the two approaches for upwind flux evaluation, allowing for head-to-head accuracy and efficiency comparisons. Both the stability of compressive limiters and the amount of artificial diffusion generated by the schemes is found to be grid-orientation dependent, with the fluctuation splitting scheme producing less artificial diffusion than the dimensionally-split finite volume scheme. Convergence rates are compared for the combined advection-diffusion problem, with a speedup of 2-3 seen for fluctuation splitting versus finite volume when solved on the same mesh. However, accurate solutions to problems with small diffusion coefficients can be achieved on coarser meshes using fluctuation splitting rather than finite volume, so that when comparing convergence rates to reach a given accuracy, fluctuation splitting shows a 20-25 speedup over finite volume.

Wood, William A.↗
NASA NTRS1998

Dynamic Load Balancing for Adaptive Meshes using Symmetric Broadcast Networks

Many scientific applications involve grids that lack a uniform underlying structure. These applications are often dynamic in the sense that the grid structure significantly changes between successive phases of execution. In parallel computing environments, mesh adaptation of grids through selective refinement/coarsening has proven to be an effective approach. However, achieving load balance while minimizing inter-processor communication and redistribution costs is a difficult problem. Traditional dynamic load balancers are mostly inadequate because they lack a global view across processors. In this paper, we compare a novel load balancer that utilizes symmetric broadcast networks (SBN) to a successful global load balancing environment (PLUM) created to handle adaptive unstructured applications. Our experimental results on the IBM SP2 demonstrate that performance of the proposed SBN load balancer is comparable to results achieved under PLUM.

Das, Sajal K.↗
NASA NTRSDate not supplied

Wall-modeled LES of the NASA Juncture Flow Experiment

We perform wall-modeled large eddy simulation (WMLES) of the NASA Juncture Flow experiment (Kegerise & Neuhart, NASA/TM–2019–20286) using an equilibrium wall model and unstructured finite volume solver, to assess its predictive ability for complex geometries. The flow condition simulated corresponds to 5 degrees angle of attack with a freestream Mach number of 0.189, and a Reynolds number based on the mean crank chord of 2.4 million. All simulations neglect the effects of wind tunnel walls, sting and mast present in the experiment. To assess the performance of WMLES on simpler flows with very coarse grids, we simulate flow in a turbulent channel at a friction Reynolds number, Reτ≈2000, and flow through a square duct at anReτ≈1000. The duct flow results using the equilibrium wall model indicate that the skin friction is inaccurate near the corner for grid topologies and resolutions typically used in WMLES, having implications for more complicated flows such as the juncture flow. For the juncture flow simulation, two different approaches are investigated. The first approach consists of a truncated-domain simulation wherein the inflow plane of the computational domain is placed at≈0.2chord length of the wing, and we prescribe the mean flow from a separate Reynolds-averaged Navier-Stokes (RANS) solution along with synthetic turbulence to initiate realistic unsteadiness in the domain. The second approach involves simulating the entire geometry with trips to trigger transition to turbulence. The truncated- and full-domain simulations contain about 62 and 90 million cells, respectively; with 8-10 points per boundary layer thickness in the wall-parallel directions, 14-20 points in the wall-normal direction and a near-wall viscous spacing (∆n+1) of≈100. Preliminary results are encouraging overall in terms of the prediction of wall pressure, wall skin friction, velocity and stresses; but indicate that further work is required to improve the predictions in the separation bubble and wing-fuselage corner regions. The grid resolution used in this study is still fairly coarse, and the results should be interpreted as work in progress.

Prahladh S Iyer↗
NASA NTRS2008

Application of FUN3D and CFL3D to the Third Workshop on CFD Uncertainty Analysis

Two Reynolds-averaged Navier-Stokes computer codes - one unstructured and one structured - are applied to two workshop cases (for the 3rd Workshop on CFD Uncertainty Analysis, held at Instituto Superior Tecnico, Lisbon, in October 2008) for the purpose of uncertainty analysis. The Spalart-Allmaras turbulence model is employed. The first case uses the method of manufactured solution and is intended as a verification case. In other words, the CFD solution is expected to approach the exact solution as the grid is refined. The second case is a validation case (comparison against experiment), for which modeling errors inherent in the turbulence model and errors/uncertainty in the experiment may prevent close agreement. The results from the two computer codes are also compared. This exercise verifies that the codes are consistent both with the exact manufactured solution and with each other. In terms of order property, both codes behave as expected for the manufactured solution. For the backward facing step, CFD uncertainty on the finest grid is computed and is generally very low for both codes (whose results are nearly identical). Agreement with experiment is good at some locations for particular variables, but there are also many areas where the CFD and experimental uncertainties do not overlap.

Rumsey, C. L.↗
NASA NTRS2000

Computation of an Underexpanded 3-D Rectangular Jet by the CE/SE Method

Recently, an unstructured three-dimensional space-time conservation element and solution element (CE/SE) Euler solver was developed. Now it is also developed for parallel computation using METIS for domain decomposition and MPI (message passing interface). The method is employed here to numerically study the near-field of a typical 3-D rectangular under-expanded jet. For the computed case-a jet with Mach number Mj = 1.6. with a very modest grid of 1.7 million tetrahedrons, the flow features such as the shock-cell structures and the axis switching, are in good qualitative agreement with experimental results.

Loh, Ching Y.↗
NASA NTRS1995

Emerging CFD technologies and aerospace vehicle design

With the recent focus on the needs of design and applications CFD, research groups have begun to address the traditional bottlenecks of grid generation and surface modeling. Now, a host of emerging technologies promise to shortcut or dramatically simplify the simulation process. This paper discusses the current status of these emerging technologies. It will argue that some tools are already available which can have positive impact on portions of the design cycle. However, in most cases, these tools need to be integrated into specific engineering systems and process cycles to be used effectively. The rapidly maturing status of unstructured and Cartesian approaches for inviscid simulations makes suggests the possibility of highly automated Euler-boundary layer simulations with application to loads estimation and even preliminary design. Similarly, technology is available to link block structured mesh generation algorithms with topology libraries to avoid tedious re-meshing of topologically similar configurations. Work in algorithmic based auto-blocking suggests that domain decomposition and point placement operations in multi-block mesh generation may be properly posed as problems in Computational Geometry, and following this approach may lead to robust algorithmic processes for automatic mesh generation.

Aftosmis, Michael J.↗
NASA NTRS2016

Analysis of Low-Speed Stall Aerodynamics of a Swept Wing with Seamless Flaps

Computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a Gulfstream G-III airplane (Gulfstream Aerospace Corporation, Savannah, Georgia) swept wing modified with an experimental seamless, compliant flap called the Adaptive Compliant Trailing Edge (ACTE) flap. The stall characteristics of the modified ACTE wing were analyzed and compared with the unmodified, clean wing at the flight speed of 120 knots and altitude of 2300 feet above mean sea level, in free air as well as in ground effect. A polyhedral finite-volume unstructured full Navier-Stokes CFD code, STAR-CCM (registered trademark) plus (CD-adapco [Computational Dynamics Limited, United Kingdom, and Analysis & Design Application Co., United States]), was used. Steady Reynolds-averaged Navier-Stokes CFD simulations were conducted for a clean wing and the ACTE wings at various ACTE deflection angles in free air (-2 degrees, 15 degrees, and 30 degrees) as well as in ground effect (15 degrees and 30 degrees). Solution sensitivities to grid densities were examined. In free air, the ACTE wings are predicted to stall at lower angles of attack than the clean wing. In ground effect, all wings are predicted to stall at lower angles of attack than the corresponding wings in free air. Even though the lift curves are higher in ground effect than in free air, the maximum lift coefficients for all wings are lower in ground effect. Finally, the lift increase due to ground effect for the ACTE wing is predicted to be less than the clean wing.

CFD↗
NASA NTRS2013

Implementation of Implicit Adaptive Mesh Refinement in an Unstructured Finite-Volume Flow Solver

This paper explores the implementation of adaptive mesh refinement in an unstructured, finite-volume solver. Unsteady and steady problems are considered. The effect on the recovery of high-order numerics is explored and the results are favorable. Important to this work is the ability to provide a path for efficient, implicit time advancement. A method using a simple refinement sensor based on undivided differences is discussed and applied to a practical problem: a shock-shock interaction on a hypersonic, inviscid double-wedge. Cases are compared to uniform grids without the use of adapted meshes in order to assess error and computational expense. Discussion of difficulties, advances, and future work prepare this method for additional research. The potential for this method in more complicated flows is described.

Schwing, Alan M.↗
NASA NTRS2004

Watertight Anisotropic Surface Meshing Using Quadrilateral Patches

This paper presents a simple technique for generating anisotropic surface triangulations using unstructured quadrilaterals when the CAD entity can be mapped to a logical rectangle. Watertightness and geometric quality measures are maintained and are consistent with the CAPRI default tessellator. These triangulations can match user specified criteria for chord-height tolerance, neighbor triangle dihedral angle, and maximum triangle side length. This discrete representation has hooks back to the owning geometry and therefore can be used in conjunction with these entities to allow for easy enhancement or modification of the tessellation suitable for grid generation or other downstream applications.

Haimes, Robert↗
NASA NTRS2023

Turbulence Simulations of Transonic Flows over an NACA-0012 Airfoil

Three different simulation approaches, namely unsteady Reynolds-averaged Navier-Stokes (URANS), delayed detached-eddy simulation (DDES),and wall-modeled large-eddy simulation (WMLES)are employed to simulate transonic flow over an NACA-0012 airfoil at different angles of attack covering pre- and post-buffet-onset regimes. The freestream Mach number is 0.75,and the Reynolds number based on the chord length is 10million. These conditions are the same as the wind-tunnel experimental conditions of McDevitt and Okuno (1985).1The NASA FUN3D solver is used for the simulations, which is an unstructured, compressible flow solver. The URANS simulations are performed using the Spalart-Allmaras (SA) model with the compressibility correction, the DDES predictions are based on the SA model, and the WMLES are performed using an equilibrium wall-model.The unsteady RANS simulations,only with the compressibility correction,predict the pre- and post-buffet characteristics,which compare well with the experimental results. DDES results predicted a lower buffet onset angle compared to experiment.The predicted shock locations are upstream of the locations predicted by URANS. Using a fine grid in the spanwise direction, WMLES predictions show buffeting consistent with the experiment

Transonic Buffet↗
NASA NTRSDate not supplied

Turbulence Simulations of Transonic Flows over an NACA-0012 Airfoil

Three different simulation approaches, namely unsteady Reynolds-averaged Navier-Stokes (URANS), delayed detached-eddy simulation (DDES), and wall-modeled large-eddy simulation (WMLES) are employed to simulate transonic flow over an NACA-0012 airfoil at different angles of attack covering pre- and post-buffet-onset regimes. The freestream Mach number is 0.75, and the Reynolds number based on the chord length is 10 million. These conditions are the same as the wind-tunnel experimental conditions of McDevitt and Okuno (1985). The NASA FUN3D solver is used for the simulations, which is an unstructured, compressible flow solver. The URANS simulations are performed using the Spalart-Allmaras (SA) model with the compressibility correction, the DDES predictions are based on the SA model, and the WMLES are performed using an equilibrium wall-model. The unsteady RANS simulations, only with the compressibility correction, predict the pre- and post- buffet characteristics, which compare well with the experimental results. DDES results predicted a lower buffet onset angle compared to experiment. The predicted shock locations are upstream of the locations predicted by URANS. Using a fine grid in the spanwise direction, WMLES predictions show buffeting consistent with the experiment.

Transonic Buffet↗
NASA NTRSDate not supplied

Turbulence Simulations of Transonic Flows over NACA-0012 and OAT15A Airfoils

Three different simulation approaches, namely unsteady Reynolds-averaged Navier-Stokes (URANS), delayed detached-eddy simulation (DDES), and wall-modeled large-eddy simulation (WMLES) are employed to simulate transonic flow over an NACA-0012, OAT15A airfoils at different angles of attack covering pre- and post-buffet-onset regimes. The freestream Mach number is 0.75, and the Reynolds number based on the chord length is 10 and 3million, respectively. The NASA FUN3D solver is used for the simulations, which is an unstructured, compressible flow solver. The URANS simulations are performed using the Spalart-Allmaras (SA) model with the compressibility correction, the DDES predictions are based on the SA model, and the WMLES are performed using an equilibrium wall-model. The unsteady RANS simulations, only with the compressibility correction, predict the pre- and post- buffet characteristics, which compare well with the experimental results. DDES results predicted a lower buffet onset angle compared to experiment. The predicted shock locations are upstream of the locations predicted by URANS. Using a fine grid in the spanwise direction, WMLES predictions show buffeting consistent with the experiment.

Computational Fluid Dynamics↗
NASA NTRSDate not supplied

Turbulence Simulations of Transonic Flows over NACA-0012 and OAT15A Airfoils

Three different simulation approaches, namely unsteady Reynolds-averaged Navier-Stokes (URANS), delayed detached-eddy simulation (DDES), and wall-modeled large-eddy simulation (WMLES) are employed to simulate transonic flow over an NACA-0012, OAT15A airfoils at different angles of attack covering pre- and post-buffet-onset regimes. The freestream Mach number is 0.75, and the Reynolds number based on the chord length is 10 and 3million, respectively. The NASA FUN3D solver is used for the simulations, which is an unstructured, compressible flow solver. The URANS simulations are performed using the Spalart-Allmaras (SA) model with the compressibility correction, the DDES predictions are based on the SA model, and the WMLES are performed using an equilibrium wall-model. The unsteady RANS simulations, only with the compressibility correction, predict the pre- and post- buffet characteristics, which compare well with the experimental results. DDES results predicted a lower buffet onset angle compared to experiment. The predicted shock locations are upstream of the locations predicted by URANS. Using a fine grid in the spanwise direction, WMLES predictions show buffeting consistent with the experiment.

Computational Fluid Dynamics↗
NASA NTRSDate not supplied

Evaluation of Wall-Modeled Les for Flow Over A Multi-Element Airfoil

We perform wall-modeled large-eddy simulations (WMLES) of turbulent flow over a 30P30N multielement airfoil at various angles of attack to assess its ability to accurately predict lift using an unstructured node-based finite-volume methodology. The flow conditions are based on the experiments reported in Klausmeyer & Lin [NASA /TM-112858]. The oncoming flow Mach number is 0.2, and the stowed chord-based Reynolds number (𝑅𝑒𝑐) is 9 million. The angle of attack (𝛼) is varied between 8◦ and 23◦ with the expected stall angle of around 21◦. The simulated geometry is periodic in the span, thus any three-dimensional effects present in the experiment are ignored. We first analyze the predictions with baseline isotropic and anisotropic grids containing over 16 grid points per boundary-layer thickness. The near-wall streamwise/nominal spacing ratio is 0.4 at the leading/trailing edges of the slat, main element and flap, and 1 elsewhere, and the first wall-normal/nominal spacing ratio is 0.375 over most of the airfoil for the anisotropic grid, while these are unity for the isotropic grid. It is found that the predicted lift and wall pressures, near-wall velocity profiles, and the location of onset of resolved turbulence are sensitive to the near-wall grid anisotropy. Further sensitivities were explored at lower angles of attack by independently varying the streamwise and wall-normal grid anisotropies. The effects of both off-wall and near-wall grid refinement were also quantified. For the grid resolutions used here, our results suggest that the first wall-normal spacing, which coincides with the WMLES exchange location, has a dominant effect on the predictions for this flow configuration.

Computational Fluid Dynamics↗
NASA NTRSDate not supplied

Turbulence Simulations of Transonic Flows over an NACA-0012 Airfoil

Three different simulation approaches, namely unsteady Reynolds-averaged Navier-Stokes (URANS), delayed detached-eddy simulation (DDES), and wall-modeled large-eddy simulation (WMLES) are employed to simulate transonic flow over an NACA-0012 airfoil at different angles of attack covering pre-and post-buffet-onset regimes. The freestream Mach number is 0.75,and the Reynolds number based on the chord length is 10million. These conditions are the same as the wind-tunnel experimental conditions of McDevitt and Okuno (1985). The NASA FUN3D solver is used for the simulations, which is an unstructured, compressible flow solver. The URANS simulations are performed using the Spalart-Allmaras (SA) model with the compressibility correction, the DDES predictions are based on the SA model, and the WMLES are performed using an equilibrium wall-model. The unsteady RANS simulations, only with the compressibility correction, predict the pre-and post-buffet characteristics, which compare well with the experimental results. DDES results predicted a lower buffet onset angle compared to experiment. The predicted shock locations are upstream of the locations predicted by URANS. Using a fine grid in the span wise direction, WMLES predictions show buffeting consistent with the experiment.

Transonic Buffet↗
NASA NTRS1993

An upwind multigrid method for solving viscous flows on unstructured triangular meshes

A multigrid algorithm is combined with an upwind scheme for solving the two dimensional Reynolds averaged Navier-Stokes equations on triangular meshes resulting in an efficient, accurate code for solving complex flows around multiple bodies. The relaxation scheme uses a backward-Euler time difference and relaxes the resulting linear system using a red-black procedure. Roe's flux-splitting scheme is used to discretize convective and pressure terms, while a central difference is used for the diffusive terms. The multigrid scheme is demonstrated for several flows around single and multi-element airfoils, including inviscid, laminar, and turbulent flows. The results show an appreciable speed up of the scheme for inviscid and laminar flows, and dramatic increases in efficiency for turbulent cases, especially those on increasingly refined grids.

Bonhaus, Daryl Lawrence↗