Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Testing and Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Water-Gas Shift Activity of Cu Surfaces and Cu Nanoparticles Supported on Metal Oxides

Oxide supported Cu catalysts show significant activity for the water-gas shift reaction (WGS, CO + H{sub 2}O {yields} H{sub 2} + CO{sub 2}) but their performance is not fully understood and is highly dependent on the synthesis conditions or the nature of the oxide support. This article describes a series of new studies examining the water-gas shift activity of Cu/MgO(1 0 0) surfaces and compares it to the activities found for pure copper systems, Cu nanoparticles in contact with well-defined surfaces of TiO{sub 2}, ZnO, MoO{sub 2} and CeO{sub 2}, and Cu cations present in mixed-metal oxides. Catalytic tests performed over CuFe{sub 2}O{sub 4}, Ce{sub 1-x}Cu{sub x}O{sub 2} or CuMoO{sub 4} show significant WGS activity only when the Cu cations in the mixed-metal oxide are reduced to metallic copper. Thus, Cu nanoparticles were deposited on different oxide surfaces and their WGS activity was measured in a batch reactor (P{sub CO} = 20 Torr; P{sub H{sub 2}O} = 10 Torr; T = 575-650 K). The WGS activity of the Cu nanoparticles supported on MgO(1 0 0) was 2-3 times larger than that of Cu(1 0 0). Even better WGS catalysts were obtained when Cu was deposited on CeO{sub 2}(1 1 1) or TiO{sub 2}(1 1 0). An apparent activation energy of 13.8 kcal/mol was found for the WGS on Cu/MgO(1 0 0). This is smaller than the value of 15.2 kcal/mol observed on Cu(1 0 0), and substantially larger than the values of 7-9 kcal/mol seen for the apparent activation energies of the Cu/CeO2(1 1 1) and Cu/TiO2(1 1 0) catalysts. Post-reaction surface characterization pointed to the lack of O vacancies in the Cu/MgO(1 0 0) catalysts. This is in contrast to results found for Cu/CeO{sub 2}(1 1 1) and Cu/TiO{sub 2}(1 1 0), where the oxide support exhibits a significant concentration of O vacancies as a consequence of the WGS reaction. The oxygen vacancies present in Cu/CeO{sub 2}(1 1 1) and Cu/TiO{sub 2}(1 1 0) help in the dissociation of the water molecule and reduce the apparent activation energy for the WGS process. Such a phenomenon cannot occur on the Cu/MgO(0 0 1) catalysts, and the main steps of the WGS probably take place on the Cu nanoparticles.

36 MATERIALS SCIENCE↗

A Clustering Graph Generator

In very simple terms a network can be de ned as a collection of points joined together by lines. Thus, networks can be used to represent connections between entities in a wide variety of elds including engi- neering, science, medicine, and sociology. Many large real-world networks share a surprising number of properties, leading to a strong interest in model development research and techniques for building synthetic networks have been developed, that capture these similarities and replicate real-world graphs. Modeling these real-world networks serves two purposes. First, building models that mimic the patterns and prop- erties of real networks helps to understand the implications of these patterns and helps determine which patterns are important. If we develop a generative process to synthesize real networks we can also examine which growth processes are plausible and which are not. Secondly, high-quality, large-scale network data is often not available, because of economic, legal, technological, or other obstacles [7]. Thus, there are many instances where the systems of interest cannot be represented by a single exemplar network. As one example, consider the eld of cybersecurity, where systems require testing across diverse threat scenarios and validation across diverse network structures. In these cases, where there is no single exemplar network, the systems must instead be modeled as a collection of networks in which the variation among them may be just as important as their common features. By developing processes to build synthetic models, so-called graph generators, we can build synthetic networks that capture both the essential features of a system and realistic variability. Then we can use such synthetic graphs to perform tasks such as simulations, analysis, and decision making. We can also use synthetic graphs to performance test graph analysis algorithms, including clustering algorithms and anomaly detection algorithms.

97 MATHEMATICS AND COMPUTING↗

Self-Substitution and the Temperature Effects on the Electrochemical Performance in the High Voltage Cathode System LiMn 1.5+x Ni 0.5-x O 4 (x = 0.1)

The high voltage cathode material, LiMn 1.6 Ni 0.4 O 4 , was prepared by a polymer-assisted method. The novelty of this paper is the substitution of Ni with Mn, which already exists in the crystal structure instead of other isovalent metal ion dopants which would result in capacity loss. The electrochemical performance testing including stability and rate capability was evaluated. The temperature was found to impose a change on the valence and structure of the cathode materials. Specifically, manganese tends to be reduced at a high temperature of 800 °C and leads to structural changes. The manganese substituted LiMn 1.5 Ni 0.5 O 4 (LMN) has proved to be a good candidate material for Li-ion battery cathodes displaying good rate capability and capacity retention. Finally, the cathode materials processed at 550 °C showed a stable performance with negligible capacity loss for 400 cycles.

25 ENERGY STORAGE↗

Municipal solid waste effective stress analysis

The mechanical behavior of municipal solid waste (MSW) has attracted the attention of many researchers in the field of geo-environmental engineering in recent years and several aspects of waste mechanical response under loading have been elucidated. However, the mechanical response of MSW materials under undrained conditions has not been described in detail to date. The knowledge of this aspect of the MSW mechanical response is very important in cases involving MSW with high water contents, seismic ground motion and in regions where landfills are built with poor operation conditions. This paper presents the results obtained from 26 large triaxial tests performed both in drained and undrained conditions. The results were analyzed taking into account the waste particles compressibility and the deformation anisotropy of the waste samples. The waste particles compressibility was used to modify the Terzaghi effective stress equation, using the Skempton (1961) proposition. It is shown that the use of the modified effective stress equation led to much more compatible shear strength values when comparing Consolidated-Drained (CD) and Consolidated-Undrained (CU), results, explaining the high shear strength values obtained in CU triaxial tests, even when the pore pressure is almost equal to the confining stress.

54 ENVIRONMENTAL SCIENCES↗

Numerical modeling and experimental verification of flow and heat transfer over serrated fins at low Reynolds number

The objectives of this paper are to establish a numerical modeling method incorporated with few experiments by which the performance of fins with new configuration in plate-fin heat exchangers (PFHE) can be obtained and to investigate the pressure drop and heat transfer characteristics over serrated fins in PFHE at low Reynolds number in detail. First, a variety of performance tests of PFHE were carried out with a constant air flow rate and six different oil flow rates. The Reynolds number ranged from 10 to 200 at the oil side. The Colburn factor j and friction factor f have been calculated from the experimental data. Secondly, the 3D heat transfer and pressure drop of PFHE were analyzed numerically by solving governing equations through two steps of increasing complexity. The first step was a simple model built to obtain the temperatures of separating walls. In this way, the overall heat performances were evaluated. The next step was a small scare with a high detail in the geometry description of the serrated fins at the oil side. The oil velocity and temperature distributions are shown in this step. Also presented and discussed in a detail description of local and average heat transfer characteristics of the serrated fins. The experimental results show good agreement with the corresponding numerical predictions. Hence, the numerical analysis procedure proposed in this paper can be used to predict the performance of new type fins. (author)

42 ENGINEERING↗

Photon-counting 1.0 GHz-phase-modulation fluorometer

We have constructed an improved version of a photon-counting phase-modulation fluorometer (PC-PMF) with a maximum modulation frequency of 1.0 GHz, where a phase domain measurement is conducted with a time-correlated single-photon-counting electronics. While the basic concept of the PC-PMF has been reported previously by one of the authors, little attention has been paid to its significance, other than its weak fluorescence measurement capability. Recently, we have recognized the importance of the PC-PMF and its potential for fluorescence lifetime measurements. One important aspect of the PC-PMF is that it enables us to perform high-speed measurements that exceed the frequency bandwidths of the photomultiplier tubes that are commonly used as fluorescence detectors. We describe the advantages of the PC-PMF and demonstrate its usefulness based on fundamental performance tests. In our new version of the PC-PMF, we have used a laser diode (LD) as an excitation light source rather than the light-emitting diode that was used in the primary version. We have also designed a simple and stable LD driver to modulate the device. Additionally, we have obtained a sinusoidal histogram waveform that has multiple cycles within a time span to be measured, which is indispensable for precise phase measurements. With focus on the fluorescence intensity and the resolution time, we have compared the performance of the PC-PMF with that of a conventional PMF using the analogue light detection method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvement of Carbon Dioxide Sweep Efficiency by Utilization of Microbial Permeability Profile Modification to Reduce the Amount of Oil Bypassed During Carbon Dioxide Flood

The objective of this project was to couple microbial permeability profile modification (MPPM), with carbon dioxide flooding to improve oil recovery from the Upper Cretaceous Little Creek Oil Field situated in Lincoln and Pike counties, MS. This study determined that MPPM technology, which improves production by utilizing environmentally friendly nutrient solutions to simulate the growth of the indigenous microflora in the most permeable zones of the reservoir thus diverting production to less permeable, previously unswept zones, increased oil production without interfering with the carbon dioxide flooding operation. Laboratory tests determined that no microorganisms were produced in formation waters, but were present in cores. Perhaps the single most significant contribution of this study is the demonstration that microorganisms are active at a formation temperature of 115°C (239°F) by using a specially designed culturing device. Laboratory tests were employed to simulate the MPPM process by demonstrating that microorganisms could be activated with the resulting production of oil in coreflood tests performed in the presence of carbon dioxide at 66°C (the highest temperature that could be employed in the coreflood facility). Geological assessment determined significant heterogeneity in the Eutaw Formation, and documented relatively thin, variably-lithified, well-laminated sandstone interbedded with heavily-bioturbated, clay-rich sandstone and shale. Live core samples of the Upper Cretaceous Eutaw Formation from the Heidelberg Field, MS were quantitatively assessed using SEM, and showed that during MPPM permeability modification occurs ubiquitously within pore and throat spaces of 10-20 μm diameter. Testing of the MPPM procedure in the Little Creek Field showed a significant increase in production occurred in two of the five production test wells; furthermore, the decline curve in each of the production wells became noticeably less steep. This project greatly extends the number of oil fields in which MPPM can be implemented.

02 PETROLEUM↗

Big area additive manufacturing of high performance bonded NdFeB magnets

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic properties are: intrinsic coercivity Hci = 688.4 kA/m, remanence B r = 0.51 T, and energy product (BH) max = 43.49 kJ/m 3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. As a result, the present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials.

36 MATERIALS SCIENCE↗

Susceptibility of the Colorado River basin to megadroughts in a warming climate. Final Report.

During the course of the project, we completed the following: Task 1: Off-line model simulations. We proposed to extend Maurer’s data sets through at least 2005 (to include extreme drought years in the Colorado basin). Task 2: Coupled model implementation. We proposed to implement the “standard” climate version of WRF, as used by collaborator Ruby Leung in NARCCAP simulations (see Section 5.4), and perform tests to assure that model output for runs equivalent to NARCCAP Phase 1 (reanalysis boundary conditions) are consistent. We proposed do test sensitivity to higher spatial resolution. Task 3: Retrospective coupled model simulations. We proposed to compare the climatology of key land surface and atmospheric variables from the retrospective RCM and GCM runs, as well as 1/8-degree as the historical North American Land Data Assimilation System dataset (Maurer et al., 2002) to evaluate the ability of each of the RCMs and GCMs to reproduce characteristics of observed climate. Task 4: Future climate simulations. We proposed to follow the approach from Task 3 in analysis of a 21st Century simulation, which was to be performed using the coupled WRF-VIC simulations over the Colorado River basin. Task 5: Diagnostic studies, including partially coupled model runs. We proposed to perform further diagnostic studies of the nature of land hydrologic feedbacks as they are predicted to affect runoff response to climate change in the Colorado River basin. Task 6: Evaluation of conditions in post-2000 drought years.

99 GENERAL AND MISCELLANEOUS↗

Development of Cr-coated zirconium alloy cladding for enhanced accident tolerance

In the context of the development of Enhanced Accident Tolerant Fuels (EATF), AREVA NP, along with CEA and EDF, is developing, among others, a chromium (Cr) coating (5- 20 μm thick) on zirconium alloy cladding. The coating is deposited on the cladding surface by Physical Vapor Deposition (PVD) and forms a dense and adherent protective layer. It preserves the good mechanical behavior of the current cladding in normal operating conditions while significantly improving the oxidation behavior in accidental conditions. This behavior is being evaluated through out-of-pile corrosion and mechanical tests at the AREVA NP Technical and Research Centers. The corrosion behavior was evaluated through autoclave tests in both PWR water chemistry at 360 and in 415 Celsius degrees steam to increase the corrosion kinetics. In both cases very small weight gain was measured on the order of 1 mg/dm{sup 2} and remains stable throughout the length of the tests. The mechanical behavior of Cr-coated samples was evaluated through tensile tests on Cr-coated and uncoated M5 tube samples at both room temperature and 400 Celsius degrees. The curves demonstrate that the Cr-coated samples exhibit similar mechanical behavior as uncoated samples, and for all the tests performed, the mechanical properties (yield strength 0.2%, ultimate tensile strength, and total elongation) of the Cr-coated samples all fell within the range of values for uncoated samples. In order to obtain in-pile data as early as possible on this solution, an irradiation program (called IMAGO) in the Goesgen reactor will be performed in the years to come. This will be the first irradiation of EATF solutions in a commercial reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ex Situ Investigation of Anisotropic Interconnection in Silicon-Titanium-Nickel Alloy Anode Material

Herein we investigate the nanostructural evolution of Silicon-Titanium-Nickel (Si-Ti-Ni) ternary alloy material synthesized by melt spinning process for advanced lithium-ion battery anode. The synthesized material was found to have nano-Silicon particles dispersed in the Ti 4 Ni 4 Si 7 (STN) alloy buffering matrix and was characterized by X-ray diffraction (XRD), High resolution- transmission electron microscope (HR-TEM), Scanning transmission electron microscopes - energy dispersive X-ray spectrometer (STEM-EDS), and electrochemical performance test. The role of STN matrix is to accommodate the volume expansion stresses of the dispersed Si nanoparticles. However, an interesting behavior was observed during cycling. The Si nanoparticles were observed to form interconnection channels growing through the weak STN matrix cracks and evolving to a network isolating the STN matrix into small puddles. In conclusion, this unique nanostructural evolution of Si particles and isolation of the STN matrix failing to offer significant buffering effect to the grown Si network eventually accelerates more volume expansions during cycling due to less mechanical confinement and leads to performance degradation and poor cycle stability.

36 MATERIALS SCIENCE↗

In-situ and ex-situ characterization of ion-irradiated AM materials

Additive manufacturing (AM) has attracted increasing attention in recent years as a new way of making high-quality components for nuclear reactors. While AM materials are compositionally similar to their conventionally produced counterparts, they do possess different microstructures, such as dislocation cells and chemical inhomogeneity, that can lead to different mechanical properties and performance behavior. In this study, the irradiation response of AM materials was investigated. In-situ and ex-situ ion irradiations were performed on AM316L and AM316H stainless steels (SS) at 300 and 600°C. The influence of the dislocation cell structure on the evolution of irradiation-induced dislocation loops was evident at 600ºC, but was much weaker at 300ºC. No voids were observed with the in-situ ion irradiation up to 10 dpa at both temperatures. Post-irradiation energy dispersive spectroscopy showed radiation-induced segregation (RIS) near grain boundaries and the formation of Cr-rich oxides throughout the matrix. The extent of segregation at dislocation cell walls varies with dose. Nanoindentation tests performed on the AM316L SS irradiated at 600ºC showed a complex dose dependence with softening at low doses and hardening at high doses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Status of the MeLoDIE experiment, an advanced device for the study of the irradiation creep of LWR cladding with full online capabilities

As a prototype of future instrumented material experiments in the Jules Horowitz Reactor (JHR), the MELODIE project was launched in 2009 by the CEA in collaboration with VTT. Being designed as a biaxial creep experiment with online capability, MELODIE is able to apply an online-controlled biaxial loading on a LWR clad sample up to 120 MPa and to perform an online measurement of its biaxial deformation. An important experimental challenge was to perform reliably accurate measurements under the high nuclear heat load of in-core locations while keeping within their tight space. For that purpose, specific sensors were co-designed with and built by IFE Halden. Manufacturing of the MELODIE components was completed one year ago. The complexity of its in-pile section and of the pressurization system requested a step-by-step tuning of the setup. The toughest part of this process dealt with the Diameter gauge which required a partial redesign to take into account unexpected and unwanted electromagnetic interactions with the hosting device. Final cold performance tests of the on-board instrumentation will be presented. The MELODIE device is now ready and irradiation should start in OSIRIS reactor this spring. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of readout electronics for the CMS ME0 muon detector

The Large Hadron Collider (LHC) in the High Luminosity (HL-LHC) era will be upgraded to deliver instantaneous luminosities up to 5 X 10 34 cm -2 s -1 , five times more than the original design value. In order to maintain performance of the Compact Muon Solenoid (CMS) Experiment under these conditions, ME0 is one of the new muon detectors to be added, along with GE1/1, GE2/1, RE3/1 and RE4/1. ME0 uses the triple Gas Electron Multiplier (GEM) technology and is designed to cover the far-forward region of 2.0 < |η| < 2.8. Further, the readout electronics for ME0 must be designed to deal with high data rates and be sufficiently radiation hard to operate very close to the beamline. The design and development status of the readout electronics for ME0 are presented, along with recent results from integration tests performed using the latest electronics prototypes with GEM chambers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GLYCOLIC ACID PHYSICAL PROPERTIES, IMPURITIES, AND RADIATION EFFECTS ASSESSMENT

The Defense Waste Processing Facility (DWPF) is pursuing alternative reductants/flowsheets to increase attainment to meet closure commitment dates. In fiscal year 2009, SRNL evaluated several options and recommended the further assessment of the nitric/formic/glycolic acid flowsheet. SRNL is currently performing testing with this flowsheet to support the DWPF down-select of alternate reductants. As part of the evaluation, SRNL was requested to determine the physical properties of formic and glycolic acid blends. Blends of formic acid in glycolic acid were prepared and their physical properties tested. Increasing amounts of glycolic acid led to increases in blend density, viscosity and surface tension as compared to the 90 wt% formic acid that is currently used at DWPF. These increases are small, however, and are not expected to present any difficulties in terms of processing. The effect of sulfur impurities in technical grade glycolic acid was studied for its impact on DWPF glass quality. While the glycolic acid specification allows for more sulfate than the current formic acid specification, the ultimate impact is expected to be on the order of 0.03 wt% sulfur in glass. Note that lower sulfur content glycolic acid could likely be procured at some increased cost if deemed necessary. A paper study on the effects of radiation on glycolic acid was performed. The analysis indicates that substitution of glycolic acid for formic acid would not increase the radiolytic production rate of H{sub 2} and cause an adverse effect in the SRAT or SME process. It has been cited that glycolic acid solutions that are depleted of O{sub 2} when subjected to large radiation doses produced considerable quantities of a non-diffusive polymeric material. Considering a constant air purge is maintained in the SRAT and the solution is continuously mixed, oxygen depletion seems unlikely, however, if this polymer is formed in the SRAT solution, the rheology of the solution may be affected and pumping of the solution may be hindered. However, an irradiation test with a simulated SRAT product supernate containing glycolic acid in an oxygen depleted atmosphere found no evidence of polymerization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effect of Wide-Based Single Tires on Fuel Efficiency of Class 8 Combination Trucks

In 2007 and 2008, the Oak Ridge National Laboratory, in collaboration with several industry partners, collected real-world performance and situational data for long-haul operations of Class- 8 trucks from a fleet engaged in normal freight operations. Such data and information is useful to support Class-8 modeling of heavy-truck performance, technology evaluation efforts for energy efficiency, and to provide a means of accounting for real-world driving performance within heavy-truck research and analyses. This paper presents some general statistics, including distribution of idling times during long-haul trucking operations. However, the main focus is on the analysis of some of the extensive real-world information collected in this project, specifically on the assessment of the effect that different types of tires (i.e., dual tires vs. new generation single wide-based tires or NGSWBTs) have on the fuel efficiency of Class-8 trucks. The tire effect is also evaluated as a function of the vehicle load level. In all cases analyzed, the statistical tests performed strongly suggest that fuel efficiencies achieved when using all NGSWBTs or combinations of duals and NGSWBTs are higher than in the case of a truck equipped with all dual tires.

33 ADVANCED PROPULSION SYSTEMS↗

A uniaxial stress capacitive dilatometer for high-resolution thermal expansion and magnetostriction under multiextreme conditions

Thermal expansion and magnetostriction are directional dependent thermodynamic quantities. For the characterization of novel quantum phases of matter, it is required to study materials under multi-extreme conditions, in particular, down to very low temperatures, in very high magnetic fields or under high pressure. We developed a miniaturized capacitive dilatometer suitable for temperatures down to 20 mK and usage in high magnetic fields, which exerts a large spring force between 40 to 75 N on the sample. This corresponds to a uniaxial stress up to 3 kbar for a sample with cross section of (0.5 mm){sup 2}. We describe design and performance test of the dilatometer which resolves length changes with high resolution of 0.02 Å at low temperatures. The miniaturized device can be utilized in any standard cryostat, including dilution refrigerators or the commercial physical property measurement system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718

The poor machinability and extensive work hardening of Ni-based superalloys makes additive manufacturing an attractive option for producing geometrically complex components with distinct microstructures. Although previous studies show recovery of high strength at room temperature, very few studies demonstrate successful properties at elevated temperatures required for industrial applications. Here, the objectives of this study are to present a post-build heat treatment for high strength across a wide temperature range, determine the strength contribution of nanoscale precipitating phases to the overall mechanical properties of superalloy 718, and from these, provide a comprehensive microstructure-property relationship for wrought and AM 718 to guide efforts to simulate the properties of AM components. Laser powder bed fusion–produced superalloy 718 was characterized at multiple length scales using scanning electron microscopy and transmission electron microscopy in the as-built condition and with multiple heat treatments designed to form combinations of γ', γ", and δ precipitates. Uniaxial tensile tests performed from room temperature to 600 °C on subsize specimens determined the yield strength, elastic modulus, ultimate tensile strength, fracture stress, and uniform elongation. Precipitates in this work proved to be weak barriers to dislocation motion through a dispersed barrier model, but they provided strength to the alloy through their consistent high density. The relative contribution to the yield strength from γ" remained consistent between 48% and 57% of the total strength up to 600 °C, the primary influence on the high temperature strength of superalloy 718. The strength factors for γ" and δ precipitates were found to trend inversely with tensile test temperature and may be attributable to the differences in precipitate coherency. A post-build heat treatment is recommended to maintain high strength at elevated temperatures. A quantitative microstructure-property relationship, dependent on precipitate size, density, and morphology, was derived and can estimate the yield strength across a wide temperature range applicable to the operational regimes for superalloy 718.

36 MATERIALS SCIENCE↗