Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology Deployment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Water Use in Enhanced Geothermal Systems (EGS): Geology of U.S. Stimulation Projects, Water Costs, and Alternative Water Source Policies

According to the Energy Information Administration (EIA) of the U.S. Department of Energy (DOE), geothermal energy generation in the United States is projected to more than triple by 2040 (EIA 2013). This addition, which translates to more than 5 GW of generation capacity, is anticipated because of technological advances and an increase in available sources through the continued development of enhanced geothermal systems (EGSs) and low-temperature resources (EIA 2013). Studies have shown that air emissions, water consumption, and land use for geothermal electricity generation have less of an impact than traditional fossil fuel–based electricity generation; however, the long-term sustainability of geothermal power plants can be affected by insufficient replacement of aboveground or belowground operational fluid losses resulting from normal operations (Schroeder et al. 2014). Thus, access to water is therefore critical for increased deployment of EGS technologies and, therefore, growth of the geothermal sector. This paper examines water issues relating to EGS development from a variety of perspectives. It starts by exploring the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects. It then examines the relative costs of different potential traditional and alternative water sources for EGS. Finally it summarizes specific state policies relevant to the use of alternative water sources for EGS, and finally explores the relationship between EGS site geology, stimulation protocols, and below ground water loss, which is one of the largest drivers of water consumption for EGS projects.

58 GEOSCIENCES↗

U.S. DOE Roundtable and Workshop on Advanced Steel Technologies: Emerging Global Technologies and R&D Opportunities

This report is based on the proceedings of the U.S. DOE Roundtable and Workshop on Advanced Steel Technologies Workshop hosted by Oak Ridge National Laboratory (ORNL) in cooperation with the U.S. Department of Energy s (DOE s) Advanced Manufacturing Office (AMO) on held on June 23, 2015. Representatives from industry, government, and academia met at the offices of the National Renewable Energy Laboratory in Washington, DC, to share information on emerging steel technologies, issues impacting technology investment and deployment, gaps in research and development (R&D), and opportunities for greater energy efficiency. The results of the workshop are summarized in this report. They reflect a snapshot of the perspectives and ideas generated by the individuals who attended and not all-inclusive of the steel industry and stakeholder community.

36 MATERIALS SCIENCE↗

UMo Solutions Processing in La Hague Cold Crucible Induction Melter: the Feedback From the First Years of Operation - 16376

250 cubic meters of high-level liquid waste from reprocessed U-Mo-Sn-Al spent fuel, used in Gas Cooled Reactors (GCR), were produced during the mid-1960's at La Hague facility. These 'UMo' solutions are less radioactive than the current fission product concentrates coming from ongoing reprocessing activities, but are very rich in molybdenum and phosphorus whose contents make the molten glass quite corrosive and require a high-temperature glass formulation to obtain sufficiently high waste loading factors (12% in molybdenum oxide). Hence the use of the Cold Crucible Induction Melter (CCIM) technology to process such solutions has been deemed a good opportunity for AREVA to meet its performance expectations. In addition to being very corrosive, the UMo waste is quite challenging to process as the molybdenum has a strong tendency to stick in the calciner and causes clogging issues in off-gas treatment equipment. Therefore, the process and technological qualifications were deployed in order to address these specific issues. UMo solutions processing in the La Hague CCIM has started in January 2013 and is currently ongoing. During this period (from 2013 to 2015), many data have been collected to confirm the process parameters that were defined during the qualification of this innovating process. Even if some difficulties occurred, operations teams experience along with engineering and R and D support allowed managing them. This paper presents the start-up methodology and the feedback from the first years of UMo solutions processing with the CCIM technology at La Hague site. Lessons learned are presented with the difficulties encountered and the solutions implemented, emphasizing the benefits of a close integration between R and D, engineering and operations teams. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Minimizing Ecological Impacts of Marine Energy Lighting

Marine energy is poised to become an important renewable energy contributor for the U.S., but widespread deployment of the technology hinges on its benefits outweighing the potential ecological impacts. One stressor marine energy installations introduce is light, which is known to cause varying responses among wildlife and has not yet been addressed as an environmental concern. This review discusses requirements and regulations for similar structures and how lighting design choices can be made to meet these requirements while minimizing environmental consequences. More practical guidance on implementing lighting for marine energy is needed, as well as updated guidelines to reflect technological and research advances. Known responses of wildlife to light are introduced in addition to how the responses of individuals may lead to ecosystem-level changes. The impact of light associated with marine energy installations can be reduced by following basic guidance provided herein, such as removing excess lighting, using lights with high directionality, and employing controls to reduce light levels. Continued research on animal responses to light, such as findings on minimum light levels for animal responses, alongside the development of highly-sensitivity spectral characterization capabilities can further inform lighting guidelines for deploying future open ocean marine energy devices.

54 ENVIRONMENTAL SCIENCES↗

Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis (BSA) project uses systems thinking and analysis to assess how techno economics, research and development, deployment strategies, policy, and market conditions affect the potential development trajectories of the developing bioenergy industry. This project informs researchers, decision makers, and industry by identifying opportunities for and constraints to industrial development and quantifying important industry metrics (e.g., energy, economic, environmental) towards a sustainable domestic bioenergy system. One of the tools used in this project, the Bioenergy Scenario Model (BSM) is a publicly-available, unique, validated, state-of-the-art, award-winning, fourth-generation model of the domestic biofuels supply chain which explicitly focuses on how and under what conditions biofuel technologies might be deployed to contribute to the U.S. transportation energy sector. Analysis products from this effort enable the development of the bioenergy industry by (1) encouraging policy-makers to explore multiple levers simulating outside impacts on biofuels production, identifying policy actions; (2) improving industry's understanding of growth potential under different market conditions, better targeting their development efforts; and (3) providing universities and other interested stakeholders with analysis tools and analyses that can be adapted to meet research and teaching objectives, thus connecting students with careers that build the industry.

bioenergy↗

Comparative requirements, stakes and deployment for 2 ongoing major I and C modernization projects (NPIC2017 - 19956) - 293

Rolls-Royce Civil Nuclear I and C is deploying its safety and safety-related technologies in more than 80 plants, in particular in France, China and Finland. This paper gives an overview of the context (including regulatory requirements), stakes, objectives and progress as well as of the technology and technical solutions being deployed in two representative I and C modernization examples: - The modernization of 2 VVER plants in Loviisa (Finland); - Modernization of 20 PWR plants for EDF in France. While there are many similarities: a tight schedule, the cohabitation of new and old systems, mostly from third parties, both digital and analog, and some additional improvements and modifications, the context of these two projects is very different: - Fleet Vs 'isolated' plants approach; - Different types of reactors (PWR Vs VVER); - Involvement of a large utility and Integrator (EDF/Areva) Vs a smaller Utility (Fortum); - Specific safety requirements from well recognized safety authorities (French ASN and Finnish STUK); - Implementation of specific safety functions with the same Safety platform (Rolls-Royce Spinline{sup R}). From this comparison we will extract the main challenges faced, the solutions implemented and some key success factors for such I and C modernizations. In particular: the licensing, the importance of a proven and adaptable safety platform and the often overlooked aspects such as communication and joint working-organization with all the stakeholders: customer, supply chain and safety authorities. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

PVMirror: A New Concept for Tandem Solar Cells and Hybrid Solar Converters

As the solar electricity market has matured, energy conversion efficiency and storage have joined installed system cost as significant market drivers. In response, manufacturers of flatplate silicon photovoltaic (PV) cells have pushed cell efficiencies above 25%—nearing the 29.4% detailed-balance efficiency limit— and both solar thermal and battery storage technologies have been deployed at utility scale. This paper introduces a new tandem solar collector employing a “PVMirror” that has the potential to both increase energy conversion efficiency and provide thermal storage. A PVMirror is a concentrating mirror, spectrum splitter, and light-to-electricity converter all in one: It consists of a curved arrangement of PV cells that absorb part of the solar spectrum and reflect the remainder to their shared focus, at which a second solar converter is placed. A strength of the design is that the solar converter at the focus can be of a radically different technology than the PV cells in the PVMirror; another is that the PVMirror converts a portion of the diffuse light to electricity in addition to the direct light. Here, we consider two case studies—a PV cell located at the focus of the PVMirror to form a four-terminal PV–PV tandem, and a thermal receiver located at the focus to form a PV–CSP (concentrating solar thermal power) tandem—and compare the outdoor energy outputs to those of competing technologies. PVMirrors can outperform (idealized) monolithic PV–PV tandems that are under concentration, and they can also generate nearly as much energy as silicon flat-plate PV while simultaneously providing the full energy storage benefit of CSP.

14 SOLAR ENERGY↗

Scalable Technologies Achieving Risk-Informed Condition-Based Predictive Maintenance Enhancing the Economic Performance of Operating Nuclear Power Plants

The primary objective of the research presented in this report is to develop scalable technologies that are deployable across plant assets and across the nuclear fleet to achieve risk-informed predictive maintenance (PdM) strategies at commercial nuclear power plants (NPPs). Over the years, the nuclear fleet has relied on labor-intensive and time-consuming preventive maintenance (PM) programs, driving up operation and maintenance (O&M) costs to achieve high capacity factors. A well-constructed risk-informed PdM approach for an identified plant asset has been developed in this research, taking advantage of advancements in data analytics, machine learning (ML), artificial intelligence (AI), physics-informed modeling, and visualization. These technologies would allow commercial NPPs to reliably transition from current labor-intensive PM programs to a technology driven PdM program, eliminating unnecessary O&M costs. The work presented in the report is being developed as part of a collaborative research effort between Idaho National Laboratory and Public Service Enterprise Group Nuclear, LLC. This report (1) reflects the results of work by LWRS Program researchers with PSEG, Nuclear LLC-owned Salem and Hope Creek Nuclear Power Plants; (2) presents utilization of circulating water system (CWS) heterogeneous data and fault modes from both the Salem and Hope Creek nuclear power plant sites to develop salient fault signatures associated with each fault mode; (3) describes the integration of component-level predictive models into a robust system-level model enabled by the federated-transfer learning; (4) describes the development of physics-informed model of circulating water pump and motor; (5) develops a scalable risk and economic model; and (6) outlines the development of a user-centric visualization application. The outcomes presented in this report lays the foundation and provides a much-needed technical basis to focus on explainability and trustworthiness of ML and AI-based technologies, as part of future research.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Safety in Artificial Intelligence: Challenges and Opportunities for the U.S. National Labs and Beyond

This report discusses the importance of the critical and underexplored topic of artificial intelligence (AI) safety, as highlighted during the “Strategy Alignment on AI Safety” workshop convened at Lawrence Livermore National Laboratory (LLNL) in April 2024. Through a summary of keynote talks, panel discussions, and breakout sessions, world-leading AI safety experts from academic, industry, national labs, and government agencies clearly agree on the need for and importance of large-scale investments for research and capabilities in AI safety. With the field innovating at unprecedented rates, there is increasing urgency to develop novel evaluation methodologies that allow full considerations of risks/threats of AI technologies in different domains. Quantitative metrics and effective methodologies that can evaluate and audit the “safeness” of how a given AI technology is trained, deployed, or regulated are, at best, nascent for certain scenarios or, more commonly, nonexistent. This maturation gap presents the possibility of serious threats to national security, and further inaction may have serious consequences. Additionally, the gap between the public’s and research community’s perceptions of AI risks/rewards is significant. While numerous voices from the AI community have expressed concern that the risks could be so high that future AI systems could inflict extinction-level damage to humanity if deployed incorrectly, the public largely is aware only of risk in low-impact scenarios. This discrepancy highlights the crucial need for researchers to articulate to governmental bodies what, why, and when various AI risks matter as part of motivating funding requests. Thus, the call to action for this community is to pursue AI safety as a “Big Science” project on a scale comparable to the Manhattan Project. High risks and high payoffs are on the table, but safe AI is a fast-moving target, and large-scale investments are needed to guide development of this technology in a responsible way. We highlight the need for a multilayered solution combining the development of new methods and algorithmic approaches to mitigate threats with an active participation of the government(s) in setting high industry standards and regulations based on state-of-the-art technology. The U.S. Department of Energy (DOE) national laboratories have served as leading institutions for scientific innovation in the U.S. for more than 70 years. Drawing on their expertise in the AI community and their history of safeguarding critical and sensitive information, and as we look to the future, national labs are the best choice for evaluating and safeguarding AI technologies.

97 MATHEMATICS AND COMPUTING↗

CO 2 geological storage: Critical insights on plume dynamics and storage efficiency during long-term injection and post-injection periods

In the quest for net-zero greenhouse gas emission, CO 2 capture and storage technologies play a prominent role. Estimates suggest a potential of sequestering up to several thousand metric gigatons of CO 2 . However, some of the main challenges in its development are an assessment of reservoir-specific storage capacities due to variabilities and heterogeneities in the underlying properties (structure, formations, facies, petrophysics, reservoir architecture, and others) and understanding the migration of CO 2 in the subsurface. How much CO 2 can be stored in a reservoir, and how quickly can it be injected? What will be the dominant storing (trapping) mechanisms? These questions, among others, remain as challenges to the commercial deployment of this technology. This article critically investigates CO 2 plume characteristics and determines the evolving contributions of different trapping mechanisms during a 100-year injection period. Here, simulation results on the CO 2 plume dynamics indicate that lateral propagation is much larger than vertical propagation. The ratio of average lateral to vertical dispersion ranged between 6.3 and 18.8 for the cases investigated. On average, for all the scenarios investigated, the free phase (mobile supercritical CO 2 ) is the dominant trapping mechanism (in terms of the amount of CO 2 stored) during the injection period, accounting up to 45% of the CO 2 injected. Both residual (30%) and solubility (25%) trapping storage ratios decline with time during injection, and no significant mineral trapping appeared during the 100-year injection period. However, the behavior of CaCO 3 suggests a predominant dissolution of CaCO 3 , especially in the vicinity of the injection well.

03 NATURAL GAS↗

Role of Energy Storage with Renewable Electricity Generation (Report Summary) (Presentation)

Renewable energy sources, such as wind and solar, have vast potential to reduce dependence on fossil fuels and greenhouse gas emissions in the electric sector. Climate change concerns, state initiatives including renewable portfolio standards, and consumer efforts are resulting in increased deployments of both technologies. Both solar photovoltaics (PV) and wind energy have variable and uncertain(sometimes referred to as 'intermittent') output, which are unlike the dispatchable sources used for the majority of electricity generation in the United States. The variability of these sources has led to concerns regarding the reliability of an electric grid that derives a large fraction of its energy from these sources as well as the cost of reliably integrating large amounts of variablegeneration into the electric grid. In this report, we explore the role of energy storage in the electricity grid, focusing on the effects of large-scale deployment of variable renewable sources (primarily wind and solar energy).

14 SOLAR ENERGY↗

BETO 2021 Peer Review - WBS 4.1.2.32: Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis project uses systems thinking and analysis to assess current and/or prospective techno-economics, research and development, deployment strategies, policy, and market conditions and their impact on the potential development trajectories of the bioenergy industry over time. Results from this project include identification of opportunities and constraints to industrial development, quantification of multiple metrics (energy, economic, environmental) and informing researchers, decision makers, and industry of the steps needed for a sustainable, nationwide biofuels industry. Analyses from this project enable the creation of a bioenergy industry by (1) inciting policy-makers to explore scenarios for nationwide biofuels production, identifying policy actions consistent with pathways for growth; (2) improving industry’s understanding of industry growth potential under different technology and investment conditions, better targeting their development efforts; and (3) providing universities and other interested stakeholders with tools and analyses that can be adapted to meet research and teaching objectives, connecting students with careers that build the industry. One of the many modeling tools used in this project, the Biomass Scenario Model (BSM) is a publicly-available, unique, validated, state-of-the-art, award-winning, fourth-generation model of the domestic biofuels supply chain which explicitly focuses on how and under what conditions biofuel technologies might be deployed to contribute to the U.S. transportation energy sector. We use models like the BSM to examine the implications of policies and incentives as well as their potential side-effects. The BSM uses a system-dynamics simulation to model dynamic interactions and transitions across the supply chain; it tracks the deployment of biofuels given industrial learning and the reaction of the investment community in the context of land availability, projected oil markets, consumer demand for biofuels, and government policies over time. Under expected market conditions, analyses using the BSM suggest that the biofuels industry may require significant external actions in the early years to thrive. Interventions that accelerate the industrial learning process (e.g. operation of pre-commercial and commercial facilities) have been identified as having strong influence in starting the growth of a commercial biofuel industry. Policies which are coordinated across the whole supply chain in BSM foster the growth of the biofuels industry and production of tens of billions of gallons of biofuels may occur under sufficiently favorable conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cast Metals Coalition Technology Transfer and Program Management Final Report

The Cast Metals Coalition (CMC) partnership program was funded to ensure that the results of the Department of Energy's (DOE) metalcasting research and development (R&D) projects are successfully deployed into industry. Specifically, the CMC program coordinated the transfer and deployment of energy saving technologies and process improvements developed under separately funded DOE programs and projects into industry. The transition of these technologies and process improvements is a critical step in the path to realizing actual energy savings. At full deployment, DOE funded metalcasting R&D results are projected to save 55% of the energy used by the industry in 1998. This closely aligns with DOE's current goal of driving a 25% reduction in industrial energy intensity by 2017. In addition to benefiting DOE, these energy savings provide metalcasters with a significant economic advantage. Deployment of already completed R&D project results and those still underway is estimated to return over 500% of the original DOE and industry investment. Energy savings estimates through December 2008 from the Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) portfolio of projects alone are 12 x 1012 BTUs, with a projection of over 50 x 1012 BTUs ten years after program completion. These energy savings and process improvements have been made possible through the unique collaborative structure of the CMC partnership. The CMC team consists of DOE's Office of Industrial Technology, the three leading metalcasting technical societies in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders Society of America; and the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. CMC provides collaborative leadership to a complex industry composed of approximately 2,100 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, new technologies enabling energy efficiencies and environment-friendly improvements are slow to develop, and have trouble obtaining a broad application. The CMC team was able to effectively and efficiently transfer the results of DOE's metalcasting R&D projects to industry by utilizing and delivering the numerous communication vehicles identified in the proposal. The three metalcasting technical associations achieved significant technology transition results under this program. In addition to reaching over 23,000 people per year through Modern Casting and 28,000 through Engineered Casting Solutions, AFS had 84 national publications and reached over 1,200 people annually through Cast Metals Institute (CMI) education courses. NADCA's education department reached over 1,000 people each year through their courses, in addition to reaching over 6,000 people annually through Die Casting Engineer, and publishing 58 papers. The SFSA also published 99 research papers and reached over 1,000 people annually through their member newsletters. In addition to these communication vehicles, the CMC team conducted numerous technical committee meetings, project reviews, and onsite visits. All of these efforts to distribute the latest metalcasting technologies contributed to the successful deployment of DOE's R&D projects into industry. The DOE/CMC partnership demonstrated significant success in the identification and review of relevant and easy-to-implement metalcasting energy-saving processes and technologies so that the results are quickly implemented and become general practice. The results achieved in this program demonstrate that sustained technology transfer efforts are a critical step in the deployment of R&D projects to industry.

36 MATERIALS SCIENCE↗

Role of Energy Storage with Renewable Electricity Generation

Renewable energy sources, such as wind and solar, have vast potential to reduce dependence on fossil fuels and greenhouse gas emissions in the electric sector. Climate change concerns, state initiatives including renewable portfolio standards, and consumer efforts are resulting in increased deployments of both technologies. Both solar photovoltaics (PV) and wind energy have variable and uncertain (sometimes referred to as intermittent) output, which are unlike the dispatchable sources used for the majority of electricity generation in the United States. The variability of these sources has led to concerns regarding the reliability of an electric grid that derives a large fraction of its energy from these sources as well as the cost of reliably integrating large amounts of variable generation into the electric grid. In this report, we explore the role of energy storage in the electricity grid, focusing on the effects of large-scale deployment of variable renewable sources (primarily wind and solar energy).

14 SOLAR ENERGY↗

Key Considerations for Adoption of Technical Codes and Standards for Battery Energy Storage Systems in Thailand

Battery storage is “technology that enables power system operators and utilities to store energy for later use. A battery energy storage system (BESS) is an electrochemical device that charges (or collects energy) from the grid or a power plant and then discharges that energy at a later time to provide electricity or other grid services when needed”. As countries in Asia consider the inclusion of BESS in their power systems to meet policy objectives, renewable energy goals, increase resilience, and expand energy access, there is an opportunity to learn from the experiences of other regions and jurisdictions that have developed more advanced storage markets and deployment methodologies. This report presents global best practices of codes, standards, and interconnection procedures developed to support the safe and reliable deployment of BESS. Several relevant case studies highlight current efforts to ensure safe operation of BESS and showcase potential pathways for adoption of relevant codes and standards. Specifically, this report is intended to support the Thailand Office of Energy Regulatory Commission (OERC) and other stakeholders in their efforts to develop technical codes and standards to govern the installation and operation of BESS; it may also be utilized as a guide for other countries as interest in the deployment of BESS technologies continues to grow.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Co-Production of Electricity and Hydrogen Using a Novel Iron-based Catalyst

The primary objective of this project was to develop a hydrogen production technology for gasification applications based on a circulating fluid-bed reactor and an attrition resistant iron catalyst. The work towards achieving this objective consisted of three key activities: Development of an iron-based catalyst suitable for a circulating fluid-bed reactor; Design, construction, and operation of a bench-scale circulating fluid-bed reactor system for hydrogen production; Techno-economic analysis of the steam-iron and the pressure swing adsorption hydrogen production processes. This report describes the work completed in each of these activities during this project. The catalyst development and testing program prepared and iron-based catalysts using different support and promoters to identify catalysts that had sufficient activity for cyclic reduction with syngas and steam oxidation and attrition resistance to enable use in a circulating fluid-bed reactor system. The best performing catalyst from this catalyst development program was produced by a commercial catalyst toll manufacturer to support the bench-scale testing activities. The reactor testing systems used during material development evaluated catalysts in a single fluid-bed reactor by cycling between reduction with syngas and oxidation with steam. The prototype SIP reactor system (PSRS) consisted of two circulating fluid-bed reactors with the iron catalyst being transferred between the two reactors. This design enabled demonstration of the technical feasibility of the combination of the circulating fluid-bed reactor system and the iron-based catalyst for commercial hydrogen production. The specific activities associated with this bench-scale circulating fluid-bed reactor systems that were completed in this project included design, construction, commissioning, and operation. The experimental portion of this project focused on technical demonstration of the performance of an iron-based catalyst and a circulating fluid-bed reactor system for hydrogen production. Although a technology can be technically feasible, successful commercial deployment also requires that a technology offer an economic advantage over existing commercial technologies. To effective estimate the economics of this steam-iron process, a techno-economic analysis of this steam iron process and a commercial pressure swing adsorption process were completed. The results from this analysis described in this report show the economic potential of the steam iron process for integration with a gasification plant for coproduction of hydrogen and electricity.

08 HYDROGEN↗

Representative Project Design Envelope for Floating Offshore Wind Energy: A Focus on the California 2023 Federal Leases

NREL developed recommendations for a representative project design envelope (RPDE) for floating offshore wind energy projects in the California lease areas, considering industry feedback from offshore wind farm developers. The RPDE provides estimates of minimum and maximum values for project design parameters that are relevant for assessing environmental impacts. The design envelope considers the practical range of technology options that may be deployed and accounts for major physical constraints, technology feasibility, and supply chain readiness. In addition to the RPDE, this report presents four scenarios that illustrate some of the differences between technologies that could be used offshore California, as well as descriptions of the typical installation processes that are expected to be used for floating offshore wind farms.

17 WIND ENERGY↗

Future Battery Material Demand Analysis Based on U.S. Department of Energy R&D Targets

The U.S. Department of Energy’s Vehicle Technologies Office (VTO) supports research, development, and deployment of efficient, sustainable transportation technologies that will improve energy efficiency and fuel economy, and enable America to use less petroleum. To accelerate the development and adoption of new technologies, VTO has developed specific targets for a wide range of powertrain components, including the energy storage system. In this study, we use Autonomie, Argonne National Laboratory’s (Argonne’s) vehicle system simulation tool to evaluate future energy storage requirements (power, energy, etc.) for different vehicle classes, powertrains, component technologies and timeframes. BatPac, Argonne’s tool dedicated to energy storage pack design and costs, is then used to quantify the materials required for each pack. Market penetrations are then used to estimate the overall material demand worldwide and in the United States, with or without recycling. The results demonstrate that the positive impact of VTO research and development will lead to significant reduction in material compared to business-as-usual due to new anode and cathode designs, along with acceleration in battery cell chemistry penetrations. In terms of material demands, it is observed that lithium demand reaches about 80,000 tons (by a factor of 42–45), nickel demand reaches about 500,000 tons (by a factor of 47–56), manganese demand reaches about 30,000–50,000 tons (by a factor of 20–34), and cobalt demand reaches about 30,000 tons (by a factor of 13–28) in the future by 2050. The individual material demand per unit energy, however, decreases significantly in the future due to advances in VTO research and development activities. The increase in battery material demands is mostly driven by increased electrified vehicle fleet penetration in the markets.

25 ENERGY STORAGE↗