Evaluation of a thin-film, heat-flux probe for measuring gas velocities in an unstable rocket combustor
Thin film, heat flux probe for measuring gas velocities in unstable rocket combustor
TEMPERATURE PROBE↗
SEARCH · Engineering Papers
Results for “THIN FILMS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A review of Sb 2 Se 3 photovoltaic absorber materials and thin-film solar cells
Energy generated from environmentally friendly, cost-effective solar cells is a key aspect for developing a clean renewable-energy economy. Non-toxic and Earth-abundant materials with high absorption coefficient (>10 5 cm -1 ) and optimal bandgap (1-1.5 eV) have received great attention as photovoltaic (PV) absorber layers during the last few decades. Among them, antimony selenide (Sb 2 Se 3 ) has been a promising PV absorber, with steadily increasing power-conversion efficiency (PCE) compared to other emerging compounds. Very recent studies showed that high-quality ZnO:Al/ZnO/CdS/TiO 2 /Sb 2 Se 3 /MoSe 2 /Mo devices with PCE of 9.2% can be fabricated using cost-effective novel compounds. Considering these recent advances, this article provides an overview of the material properties of Sb2Se3 thin films and the recent progress made with Sb 2 Se 3 -based solar cells. Furthermore, analysis of Sb 2 Se 3 -based thin-film solar cells has also shown that the devices have relatively good light management due to their suitable bandgap and high absorption coefficient, whereas carrier management, i.e. collection efficiency of photo-generated carriers, needs significant improvement. Overall, this study provides background knowledge on material properties and device performance and suggests main research directions to overcome the limiting factors of solar cell performance.
14 SOLAR ENERGY↗
Development of a Thin Film Solar Cell Interconnect for the Powersphere Concept
Progressive development of microsatellite technologies has resulted in increased demand for lightweight electrical power subsystems including solar arrays. The use of thin film photovoltaics has been recognized as a key solution to meet the power needs. The lightweight cells can generate sufficient power and still meet critical mass requirements. Commercially available solar cells produced on lightweight substrates are being studied as an option to fulfill the power needs. The commercially available solar cells are relatively inexpensive and have a high payoff potential. Commercially available thin film solar cells are primarily being produced for terrestrial applications. The need to convert the solar cell from a terrestrial to a space compatible application is the primary challenge. Solar cell contacts, grids and interconnects need to be designed to be atomic oxygen resistant and withstand rapid thermal cycling environments. A mechanically robust solar cell interconnect is also required in order to withstand handling during fabrication and survive during launch. The need to produce the solar cell interconnects has been identified as a primary goal of the Powersphere program and is the topic of this paper. Details of the trade study leading to the final design involving the solar cell wrap around contact, flex blanket, welding process, and frame will be presented at the conference.
Simburger, Edward J.↗
Atomic oxygen effects on thin film space coatings studied by spectroscopic ellipsometry, atomic force microscopy, and laser light scattering
The University of Nebraska is currently evaluating Low Earth Orbit (LEO) simulation techniques as well as a variety of thin film protective coatings to withstand atomic oxygen (AO) degradation. Both oxygen plasma ashers and an electron cyclotron resonance (ECR) source are being used for LEO simulation. Thin film coatings are characterized by optical techniques including Variable Angle Spectroscopic Ellipsometry, Optical spectrophotometry, and laser light scatterometry. Atomic Force Microscopy (AFM) is also used to characterize surface morphology. Results on diamondlike carbon (DLC) films show that DLC degrades with simulated AO exposure at a rate comparable to Kapton polyimide. Since DLC is not as susceptible to environmental factors such as moisture absorption, it could potentially provide more accurate measurements of AO fluence on short space flights.
Synowicki, R. A.↗
Endurance test of a 30-CM-diameter engineering model ion thruster. Task 12: Investigation of thin-film erosion monitors for ion thrusters
An investigation of short term measurement techniques for predicting the wearout of ion thrusters resulting from sputter erosion damage is described. The previously established laminar thin film techniques to provide high precision erosion rate data. However, the erosion rates obtained using this technique are generally substantially higher than those obtained during long term endurance tests (by virtue of the as deposited nature of the thin films), so that the results must be interpreted in a relative sense. Absolute measurements can be performed using a new masked substrate arrangement which was developed during this study. This new technique provides a means for estimating the lifetimes of critical discharge chamber components based on direct measurements of sputter erosion depths obtained during short duration (10 hour) tests. The method enables the effects on lifetime of thruster design and operating parameters to be inferred without the investment of the time and capital required to conduct long term (1000 hour) endurance tests. Results obtained using the direct measurement technique are shown to agree with sputter erosion depths calculated for the plasma conditions of the test and also with lifetest results. The direct measurement approach is shown to be applicable to both mercury and argon discharge plasma environments and should be useful in estimating the lifetimes of inert gas and extended performance mercury ion thrusters presently under development.
Beattie, J. R.↗
Quasi-deterministic localization of Er emitters in thin film TiO 2 through submicron-scale crystalline phase control
With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er 3+ ) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, making it well suited for applications in quantum communication. The deployment of Er 3+ emitters into a thin film TiO 2 platform has been a promising step toward scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. Here, we investigate laser annealing as a means to locally tune the optical resonance of Er 3+ emitters in TiO 2 thin films on Si. Using both nanoscale x-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of Er:TiO 2 is converted to rutile, the Er 3+ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.
36 MATERIALS SCIENCE↗
Twisted bilayers of thin film magnetic topological insulators
Twisted bilayer graphene (TBG) near "magic angles" has emerged as a rich platform for strongly correlated states of two-dimensional (2D) Dirac semimetals. Here we show that twisted bilayers of thin film magnetic topological insulators (MTIs) with large in-plane magnetization can realize flat bands near 2D Dirac nodes. Using a simple model for thin films of MTIs, we derive a continuum model for two such MTIs, twisted by a small angle with respect to each other. When the magnetization is in plane, we show that interlayer tunneling terms act as effective SU (2) vector potentials, which are known to lead to flat bands in TBG. We show that by changing the in-plane magnetization, it is possible to tune the twisted bilayer MTI band dispersion to quadratic band touching or to flat bands, similar to the TBG. If realized, this system can be a highly tunable platform for strongly correlated phases of two-dimensional Dirac semimetals.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Study of thin film large area photovoltaic solar energy converter Second quarterly report, 1 Jan. - 31 Mar. 1963
Thin film large area photovoltaic solar energy converter - cadmium sulfide films producted by vacuum evaparation technique
CADMIUM SULFIDE↗
Structural Modeling of a Five-Meter Thin Film Inflatable Antenna/Concentrator With Rigidized Support Struts
Dynamic characterization of a non-rigidized thin film inflatable antenna/solar concentrator structure with rigidized composite support struts is described in detail. A two-step finite element modeling approach in MSC/NASTRAN is utilized, consisting of: (1) a nonlinear static pressurization procedure used to obtain the updated stiffness matrix, and (2) a modal "restart" eigen solution that uses the modified stiffness matrix. Unique problems encountered in modeling of this large 5-m lightweight inflatable are identified, including considerable difficulty in obtaining convergence in the nonlinear pressurization solution. It was found that the extremely thin polyimide film material (.001 in or I mil) presents tremendous problems in obtaining a converged solution when internal pressure loading is applied. It was concluded that the ratios of film thickness to other geometric dimensions such as torus cross-sectional and ring diameter and lenticular diameter are the critical parameters for convergence of the pressurization procedure. Comparison of finite element predictions for frequency and mode shapes with experimental results indicated reasonable agreement considering the complexity of the structure, the film-to-air interaction, and the nonlinear material properties of the film. It was also concluded that analysis should be done using different finite element to codes to determine if a more robust and stable solution can be obtained.
Smalley, Kurt B.↗
Epitaxial Stabilization of Single-Crystal Multiferroic YCrO 3 Thin Films
We report on the growth of stoichiometric, single-crystal YCrO 3 epitaxial thin films on (001) SrTiO 3 substrates using pulsed laser deposition. X-ray diffraction and atomic force microscopy reveal that the films grew in a layer-by-layer fashion with excellent crystallinity and atomically smooth surfaces. Magnetization measurements demonstrate that the material is ferromagnetic below 144 K. The temperature dependence of dielectric permittivity shows a characteristic relaxor-ferroelectric behavior at T C = 375–408 K. A dielectric anomaly at the magnetic transition temperature indicates a close correlation between magnetic and electric order parameters in these multiferroic YCrO 3 films. These findings provide guidance to synthesize rare-earth, chromite-based multifunctional heterostructures and build a foundation for future studies on the understanding of magnetoelectric effects in similar material systems.
36 MATERIALS SCIENCE↗
Formation of Vertically Oriented Channels during Calcination of Surfactant-Templated Titania-Doped Mesoporous Silica Thin Films
Here, the mesoporous structure development during calcination of titania-doped mesoporous silica thin films is characterized by in situ grazing-incidence small angle x-ray scattering (GISAXS). Varying amounts of titania (≤ 6 mol%) are incorporated in cetyltrimethylammonium bromide (CTAB) templated film by two methods in this study: dispersion of titania in the silica matrix, and fixing titania at the pore surface by complexation of the titania precursor with a sugar-based co-surfactant, dodecyl maltoside (C 12 G 2 ). Before calcination, films templated with only CTAB display a mesoporous structure with a mixture of in-plane 2D hexagonal and randomly oriented porous structure, while C 12 G 2 -complexed film possessed randomly oriented mesostructure only. Both methods yield a final structure of hexagonal close-packed pores orthogonally oriented to the substrate after calcination at 500 °C. This is attributed to weak Si-O-Ti bonds which allow sintering to occur at 500 °C, combined with unidirectional thermal contraction of the film in the vertical direction. Anisotropic stress and annealing of the films allows the randomly oriented pores to merge vertically and form channels with pore diameter of 2.3 ± 0.3 nm. Titania doping greater than 1% is required for this transformation in films with no C 12 G 2 surfactant used while the transformation was observed for films with C 12 G 2 complexation even at low (0.005%) titania doping, perhaps accentuated by orientational disorder introduced by the sugar surfactant.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Development of optical coatings for cds thin film solar cells second quarterly report, 1 mar. - 1 jun. 1965
Optical coatings for cadmium sulfide thin film solar cells
CADMIUM SULFIDE↗
Thin-Film Personal Communications and Telemetry System /TFPCTS/ First quarterly progress report, 24 Mar. - 24 Jun. 1966
Thin film circuit modules and packaging developed for communications and telemetry system
THIN FILM↗
Feasibility Study of Thin Film Thermocouple Piles
Historically, thermopile detectors, generators, and refrigerators based on bulk materials have been used to measure temperature, generate power for spacecraft, and cool sensors for scientific investigations. New potential uses of small, low-power, thin film thermopiles are in the area of microelectromechanical systems since power requirements decrease as electrical and mechanical machines shrink in size. In this research activity, thin film thermopile devices are fabricated utilizing radio frequency sputter coating and photoresist lift-off techniques. Electrical characterizations are performed on two designs in order to investigate the feasibility of generating small amounts of power, utilizing any available waste heat as the energy source.
Sisk, R. C.↗
Thickness dependent OER electrocatalysis of epitaxial thin film of high entropy oxide
High entropy oxides (HEOs), which contain multiple elements in the same crystallographic site, are a promising platform for electrocatalysis in oxygen evolution reaction (OER). Investigating these materials in epitaxial thin film form expands the possibility of tuning OER activity by several means, which are not realizable in polycrystalline samples. To date, very few such studies have been reported. In this work, the OER activity of single-crystalline thin films of (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 , grown on NdGaO 3 substrates have been investigated in 0.1 M KOH electrolyte as a function of film thickness. The OER activity increases with the thickness of the film. X-ray absorption spectroscopy measurements find an increase in Ni $d$-O $p$ covalency and a decrease in charge transfer energy with the increase in film thickness. These facilitate higher charge transfer between Ni and surface adsorbates, increasing OER activity. However, the OER process leads to excessive leaching of thicker films and the OER activity of a 75 unit cell thick film is found to be optimal in the present study. In conclusion, this work demonstrates that the thickness of perovskite oxides can be used as a parameter to enhance OER activity.
36 MATERIALS SCIENCE↗
Synthesis of High-Quality Mg-MOF-74 Thin Films via Vapor-Assisted Crystallization
The unique features of metal-organic frameworks (MOFs), such as their large surface areas and diversity of structures, makes them suitable to a broad range of applications. One of the most critical enabling technologies for implementing MOF films is the preparation of dense and continuous films that would maximize the performance of the configurations. While formation of crystalline Mg-MOF-74 thin films presents significant challenges, demonstrating large-scale coatings of the MOF, which exhibits the highest CO2 uptake among MOFs at 1 bar and 25 °C, would be particularly beneficial for CO2- related sensing applications. In this work, we demonstrate for the first time high-quality Mg-MOF-74 films synthesized via a vapor-assisted crystallization (VAC) process. The VAC process described herein produces dense and highly crystalline layers of Mg-MOF-74 with a low coefficient of variation (COV) of film thickness below 7%. We first optimized a precursor solution for the VAC process, and then investigated the effects of synthesis temperature, time and droplet volume on the growth, crystallinity and thickness of Mg-MOF-74 films. The porosity of the film was assessed by measuring the CO2 uptake at room temperature and 1 bar. The obtained Mg-MOF-74 films possess a well-defined microporosity, as deduced from CO2 adsorption studies via quartz crystal microbalance (QCM) and comparison with bulk Mg MOF-74 reference data. Furthermore, CO2 cyclic adsorption-desorption experiments on the Mg-MOF-74
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Combinatorial Synthesis and High-Throughput Characterization of Microstructure and Phase Transformation in Ni–Ti–Cu–V Quaternary Thin-Film Library
Ni–Ti–based shape memory alloys (SMAs) have found widespread use in the last 70 years, but improving their functional stability remains a key quest for more robust and advanced applications. Named for their ability to retain their processed shape as a result of a reversible martensitic transformation, SMAs are highly sensitive to compositional variations. Alloying with ternary and quaternary elements to fine-tune the lattice parameters and the thermal hysteresis of an SMA, therefore, becomes a challenge in materials exploration. Combinatorial materials science allows streamlining of the synthesis process and data management from multiple characterization techniques. In this study, a composition spread of Ni–Ti–Cu–V thin-film library was synthesized by magnetron co-sputtering on a thermally oxidized Si wafer. Composition-dependent phase transformation temperature and microstructure were investigated and determined using high-throughput wavelength dispersive spectroscopy, synchrotron X-ray diffraction, and temperature-dependent resistance measurements. Of the 177 compositions in the materials library, 32 were observed to have shape memory effect, of which five had zero or near-zero thermal hysteresis. These compositions provide flexibility in the operating temperature regimes that they can be used in. A phase map for the quaternary system and correlations of functional properties are discussed with respect to the local microstructure and composition of the thin-film library.
42 ENGINEERING↗
Anomalous polarization reversal in strained thin films of CuInP 2 S 6
Strain-induced transitions of polarization reversal in thin films of a ferrielectric CuInP 2 S 6 (CIPS) with ideally conductive electrodes are explored using the Landau-Ginzburg-Devonshire approach with an eighth-order free energy expansion in polarization powers. Due to multiple potential wells, the height and position of which are temperature and strain dependent, the energy profiles of CIPS can flatten in the vicinity of the nonzero polarization states. Thereby, we reveal an unusually strong effect of a mismatch strain on the out-of-plane polarization reversal, hysteresis loop shape, dielectric susceptibility, and piezoelectric response of CIPS films. By varying the sign of the mismatch strain and its magnitude in a fairly narrow range, quasistatic hysteresisless paraelectric curves can transform into double, triple, and other types of pinched and single hysteresis loops. The strain effect on the polarization reversal is opposite, i.e., anomalous, in comparison with many other ferroelectric films, for which the out-of-plane remanent polarization and coercive field increase strongly for tensile strains and decrease or vanish for compressive strains. For definite values of temperature and mismatch strain, the low-frequency hysteresis loops of polarization may exhibit negative slope in a relatively narrow range of external field amplitude and frequency. The low-frequency susceptibility hysteresis loops, which correspond to the negative slope of polarization loops, contain only positive values, which can be giant in the entire range of field changes. In conclusion, the corresponding piezoresponse also reaches giant values, being maximal near coercive fields.
Dielectric properties↗