SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sudden seasonal transitions, highly consistent between all instruments, have been observed. In particular, in the early winter mid-latitudes a two-step warming of the winter mesosphere between 65 and 85 km as well as a cooling of the lower mesosphere appear to be real climatological events rather than some short-term geophysical or instrumental random variability.
Small torques by the planets can alter the direction of the Earth's rotation axis in space. These direct planetary-induced nutations have been computed using a numerical technique. 55 nutation terms with periods between 0.2 and 243 yr are presented. The maximum nutation is 0.5 milliarcseconds. Also given are planetary-induced rates and accelerations of precession and obliquity.
Results from new observations of mesospheric temperature inversion layers using long-term lidar measurements at mid- and low-latitudes are presented.
This is a continuation of the report “Effects of Hand Soldering MIL-PRF-55365 Tantalum Capacitors,” which discusses the parametric effects of convection reflow soldering, JPL standard hand soldering, and optimized hand soldering on solid tantalum capacitors. The current focus is determining the long-term reliability effects of the various soldering techniques. Unfortunately, the 100-piece sample size chosen for the highly accelerated life tests was too small to reliably determine the effects of the different soldering techniques on the lifespan of the parts. In hindsight, this likely could have been predicted based on the large alphas and small betas of the Weibull failure distributions discovered during the scouting trials. Now that the effects of inadequate sample size are better understood, an opportunity exists to not only discover whether there are real differences in the reliability associated with the various soldering techniques, but also the potential to discover the voltage acceleration model and the temperature acceleration effect for these capacitors. It is recommended that the testing be repeated with a more appropriate sample size to capture this useful information.
The exceptionally favorable close approach of Jupiter-family comet 46P/Wirtanen in 2018 December enabled characterization of its primary volatile composition with exceptionally high spatial resolution and sensitivities using the iSHELL spectrograph at the NASA Infrared Telescope Facility on Maunakea, HI. We sampled emissions from H2O, HCN, C2H2, NH3,C2H6, and CH3OH on UT 2018 December 21 using two instrumental settings that spanned the 2.9–3.6μm spectral region. We also obtained a sensitive 3σupper limit for H2CO and for the rarely studied molecule HC3N. We report rotational temperatures, production rates, and mixing ratios(relative to H2O as well as to C2H6). We place our results in context by comparing them with other comets observed at near-IR wavelengths. We also compare our results with those obtained using the NIRSPEC-2 spectrograph on Keck II on UT December 17 and 18 and with results obtained from iSHELL on other dates during the same apparition. Within1–2σ uncertainty, production rates obtained for all molecules in this work were consistent with those obtained using NIRSPEC-2 except H2O, indicating low-level variability on a timescale of days. Mixing ratios with respect to H2O in 46P/Wirtanen were consistent with corresponding values from NIRSPEC-2 within the uncertainty with the exception of CH3OH, which yielded a higher ratio on December 21. Our measurements afforded a high temporal resolution that spanned∼2/3 of the rotational period of 46P/Wirtanen, enabling us to test short-term variability in the production rates of H2O and HCN due to rotational effects. Both H2O and HCN production rates showed similar temporal variability, resulting in nearly constant HCN/H2O
A primary goal of the Deep Blue (DB) project is to create consistent long‐term aerosol data records, suitable for climate studies, using multiple satellite instruments. In order to continue Earth Observing System (EOS)‐era aerosol products into the Joint Polar Satellite System era, we have successfully ported the DB algorithm to process data from the Visible Infrared Imaging Radiometer Suite (VIIRS). Although the basic structure of the VIIRS algorithm is similar to that for the Moderate Resolution Imaging Spectroradiometer (MODIS), many enhancements have been made compared to the MODIS collection 6 (C6) version. Most have also been implemented in the latest MODIS Collection 6.1 (C6.1). For example, a new smoke mask was developed based on the spectral curvature of measured reflectance to distinguish biomass burning smoke from weakly absorbing urban/industrial aerosols. Consequently, a new aerosol‐type flag was added into the VIIRS DB data set. In addition, new dust models have been developed to account for the nonsphericity of mineral dust. As a result, a discontinuity in the retrieved aerosol optical depth (AOD) of Saharan dust plumes seen in MODIS C6 products near the boundary between North Africa and the Atlantic has been much reduced. We have also evaluated the VIIRS and MODIS Terra/Aqua C6.1 AOD against Aerosol Robotic Network data. VIIRS and MODIS retrievals show similar performance; around 80% of matchups agree with Aerosol Robotic Network within the expected error of ±(0.05 + 20)%, indicating that DB can provide consistent AOD through the historical EOS and present Joint Polar Satellite System eras.
East Asia is the most complex region in the world for aerosol studies, as it encounters a lot of varieties of aerosols, and aerosol classification can be a challenge in this region. In the present study, we focused on the relationship between aerosol types and aerosol optical properties. We analyzed the long-term (2005–2012) data of vertical profiles of aerosol extinction coefficients, lidar ratio (Sp), and other aerosol optical properties obtained from a NASA Micro-Pulse Lidar Network and Aerosol Robotic Network site in northern Taiwan, which frequently receives Asian continental outflows. Based on aerosol extinction vertical profiles, the profiles were classified into two types: type 1 (single-layer structure) and type 2 (two-layer structure). Fall season (October–November) was the prevailing season for the Type 1, whereas type 2 mainly happened in spring (March–April). In type 1, air masses normally originated from three regional sectors, i.e., Asia continental (AC), Pacific Ocean (PO), and Southeast Asia (SA). The mean Sp values were 39 ± 17 sr, 30 ± 12 sr, and 38 ± 18 sr for the AC, PO, and SA sectors, respectively. The Sp results suggested that aerosols from the AC sector contained dust and anthropogenic particles, and aerosols from the PO sector were most likely sea salts. We further combined the EPA dust event database and backward trajectory analysis for type 2. Results showed that Sp was 41 ± 14 sr and 53 ± 21 sr for dust storm and biomass-burning events, respectively. The Sp for biomass-burning events in type 2 showed two peaks patterns. The first peak occurred within range of 30–50 sr corresponding to urban pollutant, and the second peak occurred within range of 60–80 sr in relation to biomass burning. Finally, our study summarized the Sp values for four major aerosol types over northern Taiwan, viz., urban (42 ± 18 sr), dust (34 ± 6 sr), biomass-burning (69 ± 12 sr), and oceanic (30 ± 12 sr). Our findings provide useful references for aerosol classification and air pollution identification over the western North Pacific.
NASA regards data handling and archiving as an integral part of space missions, and has a strong track record of serving astrophysics data to the public, be-ginning with the IRAS satellite in 1983. Archives enable a major science return on the significant investment required to develop a space mission. In fact, the presence and accessibility of an archive can more than double the number of papers resulting from the data. In order for the community to be able to use the data, they have to be able to find the data (ease of access) and interpret the data (ease of use). Funding of archival research (e.g., the ADAP program) is also important not only for making scientific progress, but also for encouraging authors to deliver data products back to the archives to be used in future studies. NASA has also enabled a robust system that can be maintained over the long term, through technical innovation and careful attention to resource allocation. This article provides a brief overview of some of NASA's major astrophysics archive systems, including IRSA, MAST, HEASARC, KOA, NED, the Exoplanet Archive, and ADS.
In this work, we evaluate the performance of the AVHRR surface reflectance LTDR V4 using Landsat-5 Thematic Mapper (TM5) Collection-1 surface reflectance data over 440 globally distributed sites, which give a representative set of land surface types and climate conditions. Surface reflectance anisotropy effects were normalized using the VJB method, and spectral response differences were accounted for with spectral band adjustment factors (SBAFs) computed as a function of the Normalized Difference Vegetation Index (NDVI) from a set of over 100,000 hyperspectral spectra from Hyperion. The performance of the AVHRR record is reported in terms of the accuracy, precision, and uncertainty, as compared to the specifications of the reference product. Results show that the AVHRR record performance is close to the 0.071ρ+0.0071 specification defined in the original TM5 product evaluation.
Jupiter’s troposphere is dynamically characterized by a series of alternating eastward and westward jets. Embedded between these alternating jets, large vortices, characterized by their high speed closed circulations can be found in several latitudinal bands. The Great Red Spot (GRS) and the White Ovals (WOS) located at ≈22 and ≈30 degrees south respectively1 are the largest of these vortices. The GRS has undergone significant changes in size, coloration and maximum circumferential wind speed over the last two decades. The three WOS also experienced changes in size, and they merged over time until there was only one remaining, which since then has been formally known as oval BA. Here we used over four decades worth of data from the Database for Object Positions on Jupiter (JUPOS), to investigate the long-term mean longitudinal drift of these largest vortices, and to characterize the deviations from this mean drift. A linear fit to the GRS drift speed for the last two decades gives a rate of change of (3.1 ± 0.4)^(-3°)/day/year. For oval BA we find that its annual drift rate changed from -0.39°/day in 2016 to -0.58°/day in 2020 following a steep trend that is best fitted by a second order polynomial. Regarding oscillations, we find that for the last two decades the GRS has continued to oscillate longitudinally with the same period (90 days) and peak-to-peak amplitude (1.2 degrees longitude) as reported historically. For the WOS, the data prior to 2000 seems to indicate that they presented similar oscillations with periods of ≈158 days and peak-to-peak amplitudes of ≈1.6 degrees. The analysis of the data for oval BA since the year 2000 reveals evidence of an oscillation with a period of ≈138 days and peak-to-peak amplitude of ≈1.6 degrees longitude.
This report presents a summary of the long-term monitoring (LTM) activities that occurred in 2019 and 2020 at Wilson Corners, Solid Waste Management Unit 001, at the John F. Kennedy Space Center (KSC), Florida. The site is monitored under KSC’s Resource Conservation and Recovery Act Corrective Action Program. Adaptive site management is being utilized through ongoing assessment, design, and interim measures. This approach also meets the requirements of Chapter 62-780, Florida Administrative Code. The goal of LTM at this site is threefold: to determine groundwater flow characteristics, monitor the downgradient concentration trends, and monitor select locations internal to the groundwater plume. Every 5 years, upgradient and side-gradient monitoring wells are sampled to verify delineation. The last time this was performed was in 2015. Sampling of these wells in 2020 was replaced with the direct push technology investigations in October 2020 and April 2021. The activities presented in this report include three field events: (1) December 2019 -groundwater gauging of 38 monitoring wells and sampling of 36 monitoring wells; (2) May 2020 - groundwater sampling of 7 monitoring wells; and (3) December 2020 - groundwater gauging of 49 monitoring wells and sampling of 43 monitoring wells. During the December 2019 and May 2020 events, monitoring wells were sampled using passive diffusion bags and were analyzed for a “full list” of volatile organic compounds (VOCs), including Freon 113. During the December 2020 event, the low flow sampling method was used, and samples were analyzed for a “select list” of VOCs, including Freon 113. The following conclusions can be made based on the 2019 and 2020 LTM results: •In December 2019 and December 2020, groundwater flow for the site was generally to the west with the individual zones only varying by occasional northerly and southerly components. This is generally consistent with historical observations at the site. •The GCTL plume continues to extend both horizontally and vertically beyond our current monitoring well network. •The vertical extent of VOCs was historically generally delineated by monitoring wells screened greater than 48 feet bls. The results from the two vertical extent monitoring wells WILC-MW0078 and WILC-MW0130 that were sampled during the 2019 and 2020 LTM indicate that groundwater VOC concentrations in both wells were greater than the GCTL. •Freon 113 was not detected above GCTLs during the 2019 and 2020 LTM events. Based on groundwater sampling activities performed during this reporting period, including recent DPT groundwater sampling conducted for the implementation of an air sparge system, the following recommendations are provided: •Install 10 new monitoring wells, which will be sampled along with 49 existing monitoring wells, to assist with delineation of the low concentration plume. The wells are listed inTable 4-1, and the proposed locations are presented on Figures4 -1 through 4-5. (Figures 4-1, 4-2, 4-3, and 4-5 also show updated plumes and proposed performance monitoring well locations. This information will be discussed and presented under a separate cover.) •Modify the annual LTM sampling plan as presented inTable 4-1. •Sampling for future events at the site will be conducted using low flow pumping methods. The next annual LTM sampling event is currently planned for December 2021. Please note the 10 new monitoring wells will not be installed before this event but will be installed as part of the upcoming IM construction and will be sampled during baseline sampling, along with the 49 existing monitoring wells. Following this sampling event, it is recommended that the Annual LTM be combined with the performance monitoring under the IM implementation, and LTM be temporarily discontinued. Objectives of the 2021 LTM are to: (i) evaluate groundwater gradient and flow direction by collecting depth to water measurements from LTM wells; (ii) continue monitoring the peripheral VOC trends in the northern, southern, and western portions of the site by monitoring existing wells and installing and monitoring new wells as recommended; and (iii) monitor select internal plume wells.
Growing interest in Urban Air Mobility (UAM) has been demonstrated by a great deal of investment in related research made by industry, government, and academia. Based on this research effort along with considerations of the maturing concept for UAM airspace integration, a cognitive walkthrough exercise and a human-in-the-loop simulation were conducted with controller subject matter experts (SMEs) to evaluate Dallas-Fort Worth (DFW) current day helicopter routes for near-term use as UAM routes. One of the outcomes of this work is a set of heuristics that should be applied when designing UAM routes in the future. The following heuristics were identified as critical to UAM route design: the proximity of routes to surrounding airports (including approach and departure paths of traditional commercial traffic), the configuration of surrounding airports, avoiding congested or heavily populated areas, avoiding route segments that would go through several sectors, avoiding route segments that would go in and out of Class B airspace, creating routes outside of Class B airspace when able, using routes with two-way, altitude-separated traffic when able, minimizing the length of the route, avoiding commonly placed Temporary Flight Restrictions, and creating Non-Movement Areas or UNICOM Areas. This paper describes each of these identified heuristics and relevant examples based on a human-in-the-loop study conducted using the DFW area airspace.
Roads can have a significant impact on the frequency of mass wasting events in mountainous areas. However, characterizing the extent and pervasiveness of mass movements over time has rarely been documented due to limitations in available data sources to consistently map such events. We monitored the evolution of a road network and assessed its effect on mass movements for a 11-year window in Arhavi, Turkey. The main road construction projects run in the area are associated with a hydroelectric power plant as well as other road extension works and are clearly associated with the vast majority (90.1%) of mass movements in the area. We also notice that the overall number and size of the mass movements are much larger than in the naturally-occurring comparison area. This means that the sediment load originating from the anthropogenically induced mass movements is larger than its counterpart associated with naturally occurred landslides. Notably, this extra sediment load could cause river channel aggregation, reduce accommodation space and as a consequence, it could lead to an increase in the probability and severity of flooding along the river channel. This marks a strong and negative effect of human activities on the natural course of earth surface processes. We also compare frequency-area distributions of human-induced mass movements mapped in this study and co-seismic landslide inventories from the literature. By doing so, we aim to better understand the consequences of human effects on mass movements in a comparative manner. Our findings show that the damage generated by the road construction in terms of sediment loads to river channels is compatible with the possible effect of a theoretical earthquake with a magnitude greater than Mw=6.0.
Two Visible Infrared Imaging Radiometer Suite (VIIRS) instruments are currently operating in space, one onboard the Suomi National Polar-orbiting Partnership (S-NPP) satellite launched on October 28, 2011 and the other onboard the NOAA-20 satellite launched on November 18, 2017. The performance of the seven VIIRS thermal emissive bands (TEBs) is monitored via on-orbit calibration data, the analysis of Earth view observations, as well as inter-comparisons with other sensors. The Moon has been used as a unique invariant target for on-orbit sensor calibration because its surface property is considered extremely stable over time in spectra, radiometry, and geometry with a repeatable lunar phase. This paper presents the assessments of the S-NPP and NOAA-20 VIIRS TEB on-orbit calibration stability using near-monthly scheduled lunar observations over their respective missions. The methodology previously developed for MODIS is now applied to VIIRS to monitor the TEB long-term stability by extracting and trending the lunar brightness temperatures from selected unsaturated pixels. It includes a correction applied to reduce any impact from the Sun–Moon geometry (e.g. Sun-Moon distance variation). The results show that the mission-long brightness temperature trends from the lunar surface are stable for all VIIRS TEBs, despite noticeable seasonal variations in the lunar thermal emissive radiance.
Seasonal water storage in high-elevation alpine catchments are critical sources of water for mountainous regions like the western U.S. The spatial distribution of snow in these topographically complex catchments is primarily governed by orography, solar radiation, and wind redistribution. While the effect of solar shading is relatively consistent from year-to-year, the redistribution of snow due to wind is more variable–capable of producing snowpacks that have varying degrees of uniformity across these hydrologically-important catchments. A reasonable hypothesis is that a warmer climate will cause snowfall to become more dense (i.e. wetter and heavier), possibly leading to less wind redistribution and thus produce a more uniformly distributed snowpack across the landscape. In this study, we investigate the role of increasingly uniform spatial snowpack distributions on streamflow generation in the Green Lakes Valley Niwot Ridge Long Term Ecological Research station, within the headwaters of the Boulder Creek watershed in Colorado. A set of idealized hydrologic simulation experiments driven by reconstructed snowpacks spanning 2001–2014 show that more a more uniform spatial snowpack distribution leads to an earlier melt-out of31 days on average and tends to produce less total streamflow, with maximum decreases as large as 7.5%. Isolating the role of snowpack heterogeneity from melt-season precipitation, we find that snowpack uniformity reduces total streamflow by as much as 13.2%. Reductions in streamflow are largely explained by greater expo-sure to solar radiation in the uniformly distributed case relative to a more heterogeneous snowpack, with this exposure driving shifts towards earlier snowmelt and changes in soil water storage. Overall, we find that the runoff efficiency from shallower snowpacks is more sensitive to the effects of uniformity than deeper snowpacks, which has potential implications for a warming climate where shallower snowpacks and enhanced sensitivities may be present.
Aerosol chemical components such as black carbon (BC) and brown carbon (BrC) regulate aerosol optical properties, which in turn drive the atmospheric radiative forcing estimations due to aerosols. In this study, we used the long-term measurements from AERONET (Aerosol Robotic Network) to better understand the aerosol types and composition with respect to their seasonal and spatial variabilities in peninsular Southeast Asia (PSEA, here defined as Vietnam, Cambodia, Thailand, Laos, and Myanmar). Two methods (i.e., aerosol type cluster and aerosol component retrieval) were applied to determine the aerosol type and chemical composition during the biomass-burning (BB) season. AERONET sites in northern PSEA showed a higher AOD (aerosol optical depth) compared to that of southern PSEA. Differences in land use pattern, geographic location, and weather regime caused much of the aerosol variability over PSEA. Lower single-scattering albedo (SSA) and higher fine-mode fraction (FMF) values were observed in February and March, suggesting the predominance of BB type aerosols with finer and stronger absorbing particles during the dry season. However, we also found that the peak BB month (i.e., March) in northern PSEA may not coincide with the lowest SSA once dust particles have mixed with the other aerosols. Furthermore, we investigated two severe BB events in March of 2014 and 2015, revealing a significant BrC fraction during BB event days. On high AOD days, although the BC fraction was high, the BrC fraction remained low due to lack of aerosol aging. This study highlights the dominance of carbonaceous aerosols in the PSEA atmosphere during the BB season, while also revealing that transported dust particles and BrC aerosol aging may introduce uncertainties into the aerosol radiative forcing calculation.
The deterioration of visibility due to air pollutants and relative humidity has been a serious environmental problem in eastern Asia. In most previous studies, chemical compositions of atmospheric particles were provided using filter-based offline analyses, which were unable to provide long-term and in-situ measurements that resolve sufficient temporal variations of air pollution and meteorology, hindering the resolution of the relationship between air quality and visibility. Here, we present a year-long continuously measured data from a comprehensive suite of online instruments to investigate diurnal and seasonal impacts of the aerosol chemical compositions in PM2.5 on visibility seasonally and diurnally. The measured dry aerosol extinction at λ = 550 nm reached a closure with that predicted by aerosol compositions within 12%. However, the hygroscopic growth of particles under ambient RH could enhance the aerosol extinction by a factor of 2 – 6, matching the perceptive visibility of the public. Particulate ammonium nitrate was most sensitive to reducing visibility, while ammonium sulfate contributed the most to the light extinction. In spring and winter, the monsoon and stagnant air masses reduced the visibility and increased PM2.5 (> 35 μg m-3).The moisture was found to substantially enhance the light extinction under RH = 60 – 90%,reducing visibility by approximately 15 km, largely attributed to hygroscopic inorganic salts.This study serves as a metric to highlight the need to consider the influence of RH, and aqueous reactions in producing secondary inorganic aerosols on atmospheric visibility, underpinning the more accurate mitigation strategies of air pollution.
A spacecraft water disinfection system suitable for extended length space exploration should meet a list of requirements. It should prevent or control the growth of microbes, prevent or limit biofilm formation, and prevent microbiologically influenced corrosion. In addition, the system should have minimal maintenance requirements, be chemically compatible with all materials in contact with the water, be safe for human consumption, and be suitable to be shared across international spacecraft platforms and mission architectures. Silver ions are a proven broad-spectrum potable water biocide under investigation for future exploration missions. The competing technology for dosing silver ions in future water systems is based on actively dosing the ions via electrolytic production. Several challenges with this approach have prompted additional investigations into alternative dosing techniques. Control-release technology is an attractive option for developing a high-reliability passive silver dosing device. This paper describes the continued development of a nanoparticle/polyurethane (NP/PU) composite foam for the controlled release of silver ions and is intended to build upon previously published work. This paper provides the technical background and performance results (wash testing and ongoing long-term silver ion release testing) from the silver chloride (AgCl) NP/PU composite foams. The goal of the project is to develop a stable and reliable passive-dosing silver ion release device for use in future spacecraft potable water systems.