Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Annealing Temperature and Initial Iron Valence Ratio Effects on the Structural Characteristics of Nanoscale Nickel Zinc Ferrite

Nickel zinc ferrite (NZFO) nanoparticles were synthesized via a reverse micelle method with a nonionic surfactant. Three different initial Fe{sup 3+}/Fe{sup 2+} ratios were employed along with three different firing temperatures (200, 500, 1000 C) to investigate the effects on the NZFO system. Extended x-ray absorption fine structure (EXAFS) results reveal zinc loss at high annealing temperatures; at 1000 C, the loss is nearly total for Fe{sup 3+}/Fe{sup 2+} ratios other than 10:90. Annealing at 500 C, however, appears necessary for fully incorporating the zinc and nickel into the spinel phase. The best nanoferrite was thus obtained using an initial Fe{sup 3+}/Fe{sup 2+} ratio of 10:90 and a moderate firing temperature of 500 C. This sample exhibits a room temperature saturation magnetization of 58 emu/g as measured via vibrating sample magnetometry, comparable with bulk values and greater than that of confirmed nano-NZFOs found in the literature. EXAFS also indicates that in all cases in which the elements adopted a spinel structure, the nickel occupies only octahedral sites and the zinc primarily tetrahedral sites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Site-specific electronic configurations of Fe 3d states by energy loss by channeled electrons

Site-specific configurations of Fe 3d electrons in a spinel ferrite were investigated by electron energy loss spectroscopy under electron channeling conditions. Site-specific spectra were extracted by applying a multivariate curve resolution (MCR) technique to the data set. An electronic difference in the Fe sites caused by ligand field splitting of trivalent Fe was probed. This demonstrated the promise of site-specific valence and spin state analysis in spintronics applications of spinel ferrites.

36 MATERIALS SCIENCE↗

Effect Of Neodymium Substitution In Structural Characteristics Of Magnesium Ferrite

The effect of Nd{sup 3+} substitution on the structural properties of Magnesium ferrite was studied in the series MgNd{sub x}Fe{sub 2-x}O{sub 4}, where x = 0 to 0.3 in steps of 0.05. The series was prepared by sol-gel technique which is one of the novel technique to prepare nanosized samples. Structural characterization was done using X-ray diffractometer and Fourier Transform Infrared Spectrometer. XRD analysis reveals the prepared samples are single phasic till x = 0.2. From x0 = .25, a secondary phase of iron neodymium oxide appears along with the spinel phase. Particle size calculation shows the prepared samples are in the 9nm to 11 nm regime. Lattice parameter was found to increase with concentration of Nd. XRD and FTIR analysis confirmed spinel structure of the prepared samples. XRF result shows the expected composition of prepared samples. The frequency dependence of the dielectric constant in the range 100 Hz--120MHz was also studied

36 MATERIALS SCIENCE↗

Correlation between structural, magnetic, and dielectric properties of manganese substituted cobalt ferrite

Manganese (Mn) substituted cobalt ferrites (CoFe{sub 2−x}Mn{sub x}O{sub 4}, referred to CFMO) were synthesized and their structural, magnetic, and dielectric properties were evaluated. X-ray diffraction measurements coupled with Rietveld refinement indicate that the CFMO materials crystallize in the inverse cubic spinel phase. Temperature (T = 300 K and 10 K) dependent magnetization (M(H)) measurements indicate the long range ferromagnetic ordering in CoFe{sub 2−x}Mn{sub x}O{sub 4} (x = 0.00–0.15) ferrites. The cubic anisotropy constant (K{sub 1}(T)) and saturation magnetization (M{sub s}(T)) were derived by using the “law of approach” to saturation that describes the field dependence of M(H) for magnetic fields much higher than the coercive field (H{sub c}). Saturation magnetization (M{sub s}), obtained from the model, decreases with increasing temperature. For CoFe{sub 2}O{sub 4}, M{sub s} decreases from 3.63 μ{sub B} per formula unit (f.u.) to 3.47 μ{sub B}/f.u. with increasing temperature from 10 to 300 K. CFMO (0.00–0.15) exhibit the similar trend while the magnitude of M{sub s} is dependent on Mn-concentration. M{sub s}-T functional relationship obeys the Bloch's law. The lattice parameter and magnetic moment calculated for CFMO reveals that Mn ions occupying the Fe and Co position at the octahedral site in the inverse cubic spinel phase. The structure and magnetism in CFMO are further corroborated by bond length and bond angle calculations. The dielectric constant dispersion of CFMO in the frequency range of 20 Hz–1 MHz fits to the modified Debye's function with more than one ion contributing to the relaxation. The relaxation time and spread factor derived from modeling the experimental data are ∼10{sup −4} s and ∼0.35(±0.05), respectively.

36 MATERIALS SCIENCE↗

Controlled synthesis of nickel ferrite nanocrystals with tunable properties using a novel induction thermal plasma method

Nickel ferrite spinel nanopowders were synthesised using a solution spray radio-frequency inductively coupled plasma reactor over a wide range of compositions (Ni{sub x}Fe{sub 3-x}O{sub 4}, x ≤ 1), with metastable powders produced for x = 0, 0.25, and 0.5. X-ray fluorescence and X-ray diffraction coupled to Rietveld refinement show that this synthesis technique offers an excellent level of control over both the chemical and crystallographic composition of the nanopowder through the control of the input Fe/Ni ratio. The technique produces highly crystalline nanopowders without the need for post-synthesis annealing. A bulk Fe/Ni ratio ≥2 yields a pure spinel Ni{sub x}Fe{sub 3-x}O{sub 4} phase, whereas Fe/Ni ratio <2 results in the excess Ni partitioning to a secondary bunsenite (Ni{sub x},Fe{sub 1-x})O phase. Morphological analysis using transmission electron microscopy shows that two types of particles are produced in different parts of the reactor: a highly faceted powder with the truncated octahedron morphology and a smaller-sized random agglomerate. The faceted particles have a log-normal particle size distribution, with an average size of about 30 nm while the agglomerates have a characteristic length of ∼3–5 nm.

36 MATERIALS SCIENCE↗

Effect of Er doping on the structural and magnetic properties of cobalt-ferrite

Nanocrystalline particulates of Er doped cobalt-ferrites CoFe{sub (2−x)}Er{sub x}O{sub 4} (0 ≤ x ≤ 0.04), were synthesized, using sol-gel assisted autocombustion method. Co-, Fe-, and Er- nitrates were the oxidizers, and malic acid served as a fuel and chelating agent. Calcination (400–600 °C for 4 h) of the precursor powders was followed by sintering (1000 °C for 4 h) and structural and magnetic characterization. X-ray diffraction confirmed the formation of single phase of spinel for the compositions x = 0, 0.01, and 0.02; and for higher compositions an additional orthoferrite phase formed along with the spinel phase. Lattice parameter of the doped cobalt-ferrites was higher than that of pure cobalt-ferrite. The observed red shift in the doped cobalt-ferrites indicates the presence of induced strain in the cobalt-ferrite matrix due to large size of the Er{sup +3} compared to Fe{sup +3}. Greater than two-fold increase in coercivity (∼66 kA/m for x = 0.02) was observed in doped cobalt-ferrites compared to CoFe{sub 2}O{sub 4} (∼29 kA/m)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth temperature effect on the structural and magnetic properties of Fe{sub 3}O{sub 4} films grown by the self-template method

We have investigated the effect of growth temperature on the structure, surface morphology, and magnetic properties of Fe{sub 3}O{sub 4} thin films grown on SrTiO{sub 3}(001) substrates by a self-template method. To eliminate the intermixing of (001) and (111) orientations that usually occurs in spinel films grown on perovskite substrates, a thin self-template layer of (001)-oriented Fe{sub 3}O{sub 4} was deposited on a SrTiO{sub 3}(001) substrate at 400 °C prior to the main film growth at temperatures of up to 1100 °C. Increasing the growth temperature from 400 °C to 1100 °C resulted in greatly improved crystallinity of the Fe{sub 3}O{sub 4} thin films, with the rocking curve width dropping from 1.41° to 0.28°. Surface analysis by atomic force microscopy showed that raising the growth temperature increased the grain size and the surface roughness, ultimately leading to the formation of regular nanopyramid arrays at 1100 °C. The surface roughening and pyramid formation are caused by the dominance of the lowest surface energy spinel (111) crystal facet. The nanopyramids were fully relaxed but still perfectly (001)-oriented in the out-of-plane direction. The largest pyramids had the lowest coercivity due to a reduction of the demagnetization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanocrystalline zinc ferrite films studied by magneto-optical spectroscopy

Ferrimagnetic Zn-ferrite (ZnFe{sub 2}O{sub 4}) films can be grown with the ferromagnetic resonance linewidth of 40 Oe at 9.5 GHz without going through a high temperature processing. This presents interest for applications. The work deals with laser ablated ZnFe{sub 2}O{sub 4} films deposited at O{sub 2} pressure of 0.16 mbar onto fused quartz substrates. The films about 120 nm thick are nanocrystalline and their spontaneous magnetization, 4πM{sub s}, depends on the nanograin size, which is controlled by the substrate temperature (T{sub s}). At T{sub s} ≈ 350 °C, where the grain distribution peaks around ∼20–30 nm, the room temperature 4πM{sub s} reaches a maximum of ∼2.3 kG. The films were studied by magnetooptical polar Kerr effect (MOKE) spectroscopy at photon energies between 1 and 5 eV. The complementary characteristics were provided by spectral ellipsometry (SE). Both the SE and MOKE spectra confirmed ferrimagnetic ordering. The structural details correspond to those observed in MgFe{sub 2}O{sub 4} and Li{sub 0.5}Fe{sub 2.5}O{sub 4} spinels. SE experiments confirm the insulator behavior. The films display MOKE amplitudes somewhat reduced with respect to those in Li{sub 0.5}Fe{sub 2.5}O{sub 4} and MgFe{sub 2}O{sub 4} due to a lower degree of spinel inversion and nanocrystalline structure. The results indicate that the films are free of oxygen vacancies and Fe{sup 3+}-Fe{sup 2+} exchange.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and magnetic properties of MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method

Three kinds of spinel ferrite nanocrystals, MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn), are synthesized using colloid mill and hydrothermal method. During the synthesis process, a rapid mixing and reduction of cations with sodium borohydride (NaBH{sub 4}) take place in a colloid mill then through a hydrothermal reaction, a slow oxidation and structural transformation of the spinel ferrite nanocrystals occur. The phase purity and crystal lattice parameters are estimated by X-ray diffraction studies. Scanning electron microscopy and transmission electron microscopy images show the morphology and particle size of the as-synthesized ferrite nanocrystals. Raman spectrum reveals active phonon modes at room temperature, and a shifting of the modes implies cation redistribution in the tetrahedral and octahedral sites. Magnetic measurements show that all the obtained samples exhibit higher saturation magnetization (M{sub s}). Meanwhile, experiments demonstrate that the hydrothermal reaction time has significant effects on microstructure, morphologies, and magnetic properties of the as-synthesized ferrite nanocrystals.

36 MATERIALS SCIENCE↗

Structural and FMR lineshape analysis of Mn Zn-ferrite nanoparticles

The Mn{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4} (MZF) nanoparticles of 3 to 5 nm size were synthesized by chemical coprecipitation method. The X-ray diffraction (XRD) patterns were well fitted with single phase spinel ferrite structure using Rietveld analysis as Fd-3m space group. The ferromagnetic resonance (FMR) spectra of MZF nanoparticles becomes more asymmetric with increase in particle size from 3 to 5 nm. The change in FMR line shape is attributed to the increase in ferromagnetic interactions and anisotropy in the system with increase in nanoparticles size. The decrease in total absorption of the FMR line with decreasing temperature at low temperatures indicates weak antiferromagnetic coupling between the octahedral and tetrahedral sublattices of the spinel ferrite system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared spectral studies of pre- and post-irradiated Li{sub 0.5(1+x)}Ti{sub x}Al{sub 0.1}Fe{sub 2.4-1.5x}O{sub 4} system

The consequences of 50 MeV Li{sup 3+} ions irradiation on the structural behaviour of polycrystalline samples of spinel ferrite system Li{sub 0.5(1+x)}Ti{sub x}Al{sub 0.1}Fe{sub 2.4-1.5x}O{sub 4} are investigated by using infrared absorption spectroscopy. The IR spectrum showed two main absorption bands ν{sub 1} and ν{sub 2} in the range 400-700 cm{sup −1} arising from tetrahedral and octahedral interstitial sites in the spinel lattice. The shifting and splitting observed in IR frequency bands ν{sub 1} and ν{sub 2} for tetrahedral and octahedral sites under irradiation effect are ascribed to redistribution of cations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of pH on the structural and magnetic behavior of cobalt ferrite synthesized by sol-gel auto-combustion

Cobalt ferrite (CoFe{sub 2}O{sub 4}) shown to be promising candidate for applications such as high-density magnetic recording, enhanced memory storage, magnetic fluids and catalysts. Utility of ferrite nanoparticles depends on its size, dispersibility in solutions, and magnetic properties. We have investigated the structural properties of synthesized cobalt ferrite nanoparticles synthesized by sol gel auto combustion for uncontrolled, acidic, neutral and basic pH values. X-ray diffraction (XRD) study confirms the cubic spinel phase formation with lattice constant 8.38 Å. In this study, we have optimized the pH value to synthesize homogenous cobalt ferrite nanoparticles with enhanced magnetic behavior. The surface morphology has been investigated by employing SEM images and the confirmation of spinel ferrite was also supported by using IR spectroscopy. Magnetic measurements for CoFe{sub 2}O{sub 4} compositions (with pH <1, pH = 3, 7, 10) were investigated using VSM measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiscale model of metal alloy oxidation at grain boundaries

High temperature intergranular oxidation and corrosion of metal alloys is one of the primary causes of materials degradation in nuclear systems. In order to gain insights into grain boundary oxidation processes, a mesoscale metal alloy oxidation model is established by combining quantum Density Functional Theory (DFT) and mesoscopic Poisson-Nernst-Planck/classical DFT with predictions focused on Ni alloyed with either Cr or Al. Analysis of species and fluxes at steady-state conditions indicates that the oxidation process involves vacancy-mediated transport of Ni and the minor alloying element to the oxidation front and the formation of stable metal oxides. The simulations further demonstrate that the mechanism of oxidation for Ni-5Cr and Ni-4Al is qualitatively different. Intergranular oxidation of Ni-5Cr involves the selective oxidation of the minor element and not matrix Ni, due to slower diffusion of Ni relative to Cr in the alloy and due to the significantly smaller energy gain upon the formation of nickel oxide compared to that of Cr{sub 2}O{sub 3}. This essentially one-component oxidation process results in continuous oxide formation and a monotonic Cr vacancy distribution ahead of the oxidation front, peaking at alloy/oxide interface. In contrast, Ni and Al are both oxidized in Ni-4Al forming a mixed spinel NiAl{sub 2}O{sub 4}. Different diffusivities of Ni and Al give rise to a complex elemental distribution in the vicinity of the oxidation front. Slower diffusing Ni accumulates in the oxide and metal within 3 nm of the interface, while Al penetrates deeper into the oxide phase. Ni and Al are both depleted from the region 3–10 nm ahead of the oxidation front creating voids. The oxide microstructure is also different. Cr{sub 2}O{sub 3} has a plate-like structure with 1.2–1.7 nm wide pores running along the grain boundary, while NiAl{sub 2}O{sub 4} has 1.5 nm wide pores in the direction parallel to the grain boundary and 0.6 nm pores in the perpendicular direction providing an additional pathway for oxygen diffusion through the oxide. The proposed theoretical methodology provides a framework for modeling metal alloy oxidation processes from first principles and on the experimentally relevant length scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and magnetic characterization of Sr-based Ni{sub 2}X-type hexaferrite

We have investigated the synthesis conditions, and the magnetic properties of the Sr{sub 2}Ni{sub 2}X-type hexagonal ferrite, Sr{sub 2}Ni{sub 2}Fe{sub 28}O{sub 46}. The Sr{sub 2}Ni{sub 2}X-type hexaferrite was synthesized at 1240{sup ∘}C. The spontaneous magnetization at 5 K was 44.2 μ{sub B}/f.u., suggesting that most of the Ni{sup 2+} ions are at the up-spin octahedral sites in the spinel-structure blocks within the model of a Néel-type collinear ferrimagnetic structure. The Curie temperature of the Sr{sub 2}Ni{sub 2}X-type hexaferrite was estimated to be T{sub C}[Sr{sub 2}Ni{sub 2}X] = 472{sup ∘}C. This is consistent with the difference of the block stacking structures of SrM-type, Sr{sub 2}Ni{sub 2}X-type, SrNi{sub 2}W-type, and nickel spinel ferrites.

36 MATERIALS SCIENCE↗

Investigations of cations distributions and morphology of cobalt ferrite magnetic nanoparticles

Cobalt ferrite nanoparticles were synthesized by co-precipitation method and structural properties was investigated by X-ray diffraction (XRD) at room temperature. X-ray diffraction data was used to determine lattice parameter, X-ray density, distributions of cations among tetrahedral and octahedral sites, site radii, ionic radii and bond length of inverse spinel cobalt ferrite. XRD analysis revealed crystallinity and high intense peak correspond to cubic inverse spinel structure with average crystalline size measured by X-ray line profile fitting was found to be 13nm for most intense peak (311). The surface morphology and microstructural feature was investigated by TEM analysis which revealed that particle size varying from 12-22 nm with selected electron diffraction pattern (SAED).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and impedance studies of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} synthesized by sol-gel method

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is synthesized by sol-gel method by using succinic acid as chelating agent. X-ray diffraction pattern confirms the material is spinel cubic structure with Fd3m space group. Impedance spectroscopy analysis of spinel LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} was performed under a wide frequency and temperature range of 50 Hz to 5 MHz and 303 K to 783 K respectively. The hopping of the electrons, ionic conductivity and activation energy were analyzed from the relaxation frequency of the imaginary impedance (Z”). The activation energy E{sub a} is calculated from the Arrhenius plots and it is found to be 0.3713 eV, which indicates the existence of oxygen vacancy in the material. Nyquist plot indicates the presence of grain effect in the material and suppression in the grain effect is observed with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric, magnetic and electrical properties of Bi{sub 0.5}Na{sub 0.5}TiO{sub 3} – CoMn{sub 0.2}Fe{sub 1.8}O{sub 4} composites

The magnetoelectric composites of inverse spinel ferrite CoMn{sub 0.2}Fe{sub 1.8}O{sub 4} (CMFO) and Bi{sub 0.5}Na{sub 0.5}TiO{sub 3} (BNT) with general formula (x) Bi{sub 0.5}Na{sub 0.5}TiO{sub 3} – (1-x) CoMn{sub 0.2}Fe{sub 1.8}O{sub 4} have been prepared through hybrid processing route. X-ray diffraction pattern reveal that CFMO crystallizes in inverse cubic spinel phase and BNT in rhombohedral perovskite phase. Dielectric constant and dielectric loss were reported with frequency at room temperature. The magnetic properties of the composites were calculated from the Magnetization – Magnetic field (M-H) hysteresis loops obtained at room temperature. Ferroelectric properties of the composites were also investigated using Polarization –Electric field (P-E) hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic studies of Cr doped nickel ferrite thin films

We have studied the structural and magnetic properties of Cr doped nickel ferrite thin films deposited on Si (100) and Si (111) using pulsed laser deposition technique. The films were deposited under vacuum and substrate temperature was kept at 700°C. X-ray diffraction analysis revealed that films on both substrates have single phase cubic spinel structure. However, the film grown on Si (111) shows better crystalline behavior. Fourier transform infrared spectroscopy suggests that films on both substrates have mixed spinel structure. These films show magnetic hysteresis behavior and magnetization value of film on Si (100) is larger than that on Si (111). It turns out that structural and magnetic properties of these two films are correlated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗