Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Source Terms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

VLA stereoscopy of solar active regions. 1: Method and tests

We develop a new technique for extracting three-dimensional information from multiday solar Very Large Array (VLA) observations. While standard stereoscopic methods provide a three-dimensional view of an object by combining simultaneous observations from two different aspect angles, we relax the condition of simultaneity and exploit solar rotation to vary the aspect angle. The solar radio images are decomposed into Gaussian source components, which are then cross-correlated in maps from preceding and following days. This provides measurements of the three-dimensional position of correlated source centroids. In this first paper, we describe the stereoscopic method and perform tests with simulated and real radio maps (from the VLA at 20 cm), in order to study the accuracy of altitude measurements, and the limitations introduced by (i) source confusion, (ii) source motion, and (iii) the assumed differential rotation rate. The tests demonstrate that (i) the information content of a VLA map relevant for stereoscopic correlation can be conveniently represented in terms of a small number of Gaussian components; (ii) the fitting of the three-dimensional source position is stable within a numerical accuracy of less than or approximately equal to 0.02 map pixels, (iii) the relative accuracy of the altitude determination is uniform over the solar disk, and (iv) source confusion does not affect the accuracy of stereoscopic position measurements for sources with a signal-to-noise ratio of greater than or approximately equal to 36.

Aschwanden, Markus J.↗

Source Apportionment of Aerosol at a Coastal Site and Relationships with Precipitation Chemistry: A Case Study over the Southeast United States

This study focuses on the long-term aerosol and precipitation chemistry measurements from colocated monitoring sites in Southern Florida between 2013 and 2018. A positive matrix factorization (PMF) model identified six potential emission sources impacting the study area. The PMF model solution yielded the following source concentration profiles: (i) combustion; (ii) fresh sea salt; (iii) aged sea salt; (iv) secondary sulfate; (v) shipping emissions; and (vi) dust. Based on these results, concentration-weighted trajectory maps were developed to identify sources contributing to the PMF factors. Monthly mean precipitation pH values ranged from 4.98 to 5.58, being positively related to crustal species and negatively related to SO42−. Sea salt dominated wet deposition volume-weighted concentrations year-round without much variability in its mass fraction in contrast to stronger seasonal changes in PM2.5 composition where fresh sea salt was far less influential. The highest mean annual deposition fluxes were attributed to Cl−, NO3−, SO42−, and Na+ between April and October. Nitrate is strongly correlated with dust constituents (unlike sea salt) in precipitation samples, indicative of efficient partitioning to dust. Interrelationships between precipitation chemistry and aerosol species based on long-term surface data provide insight into aerosol–cloud–precipitation interactions.

positive matrix factorization↗

Survey of ion plating sources

Ion plating is a plasma deposition technique where ions of the gas and the evaporant have a decisive role in the formation of a coating in terms of adherence, coherence, and morphological growth. The range of materials that can be ion plated is predominantly determined by the selection of the evaporation source. Based on the type of evaporation source, gaseous media and mode of transport, the following will be discussed: resistance, electron beam sputtering, reactive and ion beam evaporation. Ionization efficiencies and ion energies in the glow discharge determine the percentage of atoms which are ionized under typical ion plating conditions. The plating flux consists of a small number of energetic ions and a large number of energetic neutrals. The energy distribution ranges from thermal energies up to a maximum energy of the discharge. The various reaction mechanisms which contribute to the exceptionally strong adherence - formation of a graded substrate/coating interface are not fully understood, however the controlling factors are evaluated. The influence of process variables on the nucleation and growth characteristics are illustrated in terms of morphological changes which affect the mechanical and tribological properties of the coating.

Spalvins, T.↗

Using Long-Short Term Memory Models to Predict Solar Active Regions Emergence

We train Long Short-Term Memory (LSTM) models that predict the formation of active regions (ARs), the main source of eruptive solar activity. Using the Doppler shift velocity, the continuum intensity and the magnetic field full-disk maps from SDO/HMI we have created time-series datasets of acoustic power and magnetic flux which are used to train Long Short-Term Memory (LSTM) models on predicting decreases in continuum intensity 12 hours in advance. Testing of the models' performance was done on data from 5 ARs, unseen from the model during training. The model predicted the emergence of AR11726, AR13165 and AR13179, 10, 29 and 5 hours in advance, and variations of this model achieved average RMSE values of 0.11 for both active and quiet parts of the solar disc, showing the ability of the model to capture acoustic power anomalies and predict continuum intensity variations. This work sets the foundations for the very first ML-aided prediction of solar ARs.

SMD↗

The acoustic gravity wave induced by a point source in the middle atmosphere

Acoustic gravity wave (AGW) results computed for a stationary impulsive point source and a moving point source in the middle atmosphere are presented. For a stationary impulsive point Row's far field formula of the AGW was extended into the near field one, which comprises the Zeroth order Bessel function and its derivative terms. When (t-t sub o) is not large, the contribution of the derivative terms is important. The computed results agree with the experimental ones. For a moving point source with supersonic velocity, AGW is calculated using the moving point theory. Two solar eclipses that occurred in the lower latitude and over the ocean on Feb. 16, 1980, and June 11, 1983, were compared. The results show that the theoretical curve of AGW is fairly consistent with the observed ones.

Zhang, X. J.↗

Incorporation of an Energy Equation into a Pulsed Inductive Thruster Performance Model

A model for pulsed inductive plasma acceleration containing an energy equation to account for the various sources and sinks in such devices is presented. The model consists of a set of circuit equations coupled to an equation of motion and energy equation for the plasma. The latter two equations are obtained for the plasma current sheet by treating it as a one-element finite volume, integrating the equations over that volume, and then matching known terms or quantities already calculated in the model to the resulting current sheet-averaged terms in the equations. Calculations showing the time-evolution of the various sources and sinks in the system are presented to demonstrate the efficacy of the model, with two separate resistivity models employed to show an example of how the plasma transport properties can affect the calculation. While neither resistivity model is fully accurate, the demonstration shows that it is possible within this modeling framework to time-accurately update various plasma parameters.

Polzin, Kurt A.↗

Satellite Instrument Calibration for Measuring Global Climate Change. Report of a Workshop at the University of Maryland Inn and Conference Center, College Park, MD. , November 12-14, 2002

Measuring the small changes associated with long-term global climate change from space is a daunting task. To address these problems and recommend directions for improvements in satellite instrument calibration some 75 scientists, including researchers who develop and analyze long-term data sets from satellites, experts in the field of satellite instrument calibration, and physicists working on state of the art calibration sources and standards met November 12 - 14, 2002 and discussed the issues. The workshop defined the absolute accuracies and long-term stabilities of global climate data sets that are needed to detect expected trends, translated these data set accuracies and stabilities to required satellite instrument accuracies and stabilities, and evaluated the ability of current observing systems to meet these requirements. The workshop's recommendations include a set of basic axioms or overarching principles that must guide high quality climate observations in general, and a roadmap for improving satellite instrument characterization, calibration, inter-calibration, and associated activities to meet the challenge of measuring global climate change. It is also recommended that a follow-up workshop be conducted to discuss implementation of the roadmap developed at this workshop.

NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NI↗

Effects of noise radiated from convected ring sources in coaxial dual flow. Part 1: The noise from unheated jets

The effects of flight on sound radiated from embedded, uncorrelated ring sources convecting along the midst of the primary and the secondary streams of a coaxial dual flow which emerges from a moving nozzle into the ambience are studied. Cold jets are examined. The problem is posed as a double vortex-sheet flow model which involves deliberate suppression of inherent instabilities of the flow and is formulated, as a linear problem, in terms of the combined contributions of two independent uncorrelated quadrupole-type ring sources, the one convecting in the primary flow representing the sources generated due to the interaction at the primary/secondary interface and the other convecting in the secondary flow representing the sources generated due to the interaction at the secondary/ambient interface. The analysis shows that the effects of flight induce (1) amplication of noise in the forward quadrant, (2) reduction of noise in the aft quadrant and (3) absolutely no impact on radiation of noise at Theta = 90 deg to the jet axis.

Dash, R.↗

Flight effects on noise from coaxial dual flow. I - Unheated jets

The effects of flight on sound radiated from embedded, uncorrelated ring sources convecting along the midst of the primary and the secondary streams of a coaxial dual flow which emerges from a moving nozzle into the ambience are studied. Cold jets are examined. The problem is posed as a double vortex-sheet flow model which involves deliberate suppression of inherent instabilities of the flow and is formulated, as a linear problem, in terms of the combined contributions of two independent uncorrelated quadrupole-type ring sources, the one convecting in the primary flow representing the sources generated due to the interaction at the primary/secondary interface and the other convecting in the secondary flow representing the sources generated due to the interaction at the secondary/ambient interface. The analysis shows that the effects of flight induce: (1) amplication of noise in the forward quadrant, (2) reduction of noise in the aft quadrant and (3) absolutely no impact on radiation of noise at Theta = 90 deg to the jet axis.

Dash, R.↗

Wavy-Planform Helicopter Blades Make Less Noise

Wavy-planform rotor blades for helicopters have been investigated for the first time in an effort to reduce noise. Two of the main sources of helicopter noise are blade/vortex interaction (BVI) and volume displacement. (The noise contributed by volume displacement is termed thickness noise.) The reduction in noise generated by a wavyplanform blade, relative to that generated by an otherwise equivalent straight-planform blade, affects both main sources: (1) the BVI noise is reduced through smoothing and defocusing of the aerodynamic loading on the blade and (2) the thickness noise is reduced by reducing gradients of thickness with respect to listeners on the ground.

Brooks, Thomas F.↗

Thermal interaction of the core and the mantle and long-term behavior of the geomagnetic field

The effects of temperature changes at the earth's core-mantle boundary on the velocity field of the core are analyzed. It is assumed that the geomagnetic field is maintained by thermal convection in the outer core. A model for the thermal interaction of the core and the mantle is presented which is consistent with current views on the presence of heat sources in the core and the properties of the lower mantle. Significant long-term variations in the frequency of geomagnetic reversals may be the result of fluctuating temperatures at the core-mantle boundary, caused by intermittent convection in the lower mantle. The thermal structure of the lower mantle region D double prime, extending from 2700 to 2900 km in depth, constitutes an important test of this hypothesis and offers a means of deciding whether the geomagnetic dynamo is thermally driven.

Jones, G. M.↗

KMT-2019-BLG-1715: Planetary Microlensing Event with Three Lens Masses and Two Source Stars

We investigate the gravitational microlensing event KMT-2019-BLG-1715, the light curve of which shows two short-term anomalies from a caustic-crossing binary-lensing light curve: one with a large deviation and the other with a small deviation. We identify five pairs of solutions, in which the anomalies are explained by adding an extra lens or source component in addition to the base binary-lens model. We resolve the degeneracies by applying a method in which the measured flux ratio between the first and second source stars is compared with the flux ratio deduced from the ratio of the source radii. Applying this method leaves a single pair of viable solutions, in both of which the major anomaly is generated by a planetary-mass third body of the lens, and the minor anomaly is generated by a faint second source. A Bayesian analysis indicates that the lens comprises three masses: a planet-mass object with ∼2.6 MJ and binary stars of K and M dwarfs lying in the galactic disk. We point out the possibility that the lens is the blend, and this can be verified by conducting high-resolution follow-up imaging for the resolution of the lens from the source.

Cheongho Han↗

Study, optimization, and design of a laser heat engine

Laser heat engine concepts, proposed for satellite applications, are analyzed to determine which engine concept best meets the requirements of high efficiency (50 percent or better), continuous operation in space using near-term technology. The analysis of laser heat engines includes the thermodynamic cycles, engine design, laser power sources, collector/concentrator optics, receiving windows, absorbers, working fluids, electricity generation, and heat rejection. Specific engine concepts, optimized according to thermal efficiency, are rated by their technological availability and scaling to higher powers. A near-term experimental demonstration of the laser heat engine concept appears feasible utilizing an Otto cycle powered by CO2 laser radiation coupled into the engine through a diamond window. Higher cycle temperatures, higher efficiencies, and scalability to larger sizes appear to be achievable from a laser heat engine design based on the Brayton cycle and powered by a CO laser.

Taussig, R. T.↗

Monte Carlo investigation of transient acoustic fields in partially or completely bounded medium

A simple repetitive calculation was used to investigate what happens to the field in terms of the signal paths of disturbances originating from the energy source. The computation allowed the field to be reconstructed as a function of space and time on a statistical basis. The suggested Monte Carlo method is in response to the need for a numerical method to supplement analytical methods of solution which are only valid when the boundaries have simple shapes, rather than for a medium that is bounded. For the analysis, a suitable model was created from which was developed an algorithm for the estimation of acoustic pressure variations in the region under investigation. The validity of the technique was demonstrated by analysis of simple physical models with the aid of a digital computer. The Monte Carlo method is applicable to a medium which is homogeneous and is enclosed by either rectangular or curved boundaries.

Thanedar, B. D.↗

Dust grains in a hot gas. I - Basic physics. II - Astrophysical applications

The interaction of graphite grains with a hot gas is investigated. Detailed computations, based on experimental data and simple theoretical models are presented of the energy transfer by gas particle collisions and of the sputtering rates and grain lifetimes, as functions of gas temperature and grain radius. The electric charge on the grains is calculated, and the effect of electric forces on mechanical stability is discussed. The rate at which the gas cools by this mechanism is evaluated. The results of the work on gas-grain cooling and sputtering rates are applied to various astrophysical environments where dust and hot gas may coexist. The effect is studied of swept-up interstellar grains on the evolution of young supernova remnants, and the infrared luminosity is computed as a function of the age of the remnant. An interpretation is proposed of far-infrared sources embedded in compact H II regions or dense clouds, in terms of the supernova phenomenon, with specific application to eta Carinae. The question of the existence of dust in intergalactic matter in galaxy clusters is also reexamined.

Burke, J. R.↗

Fuel-conservative engine technology

Aircraft fuel consumption is discussed in terms of its efficient use, and the conversion of energy from sources other than petroleum. Topics discussed include: fuel from coal and oil shale, hydrogen deficiency of alternate sources, alternate fuels evaluation program, and future engines.

Dugan, J. F., Jr.↗

Wavelengths and levels of the Na I isoelectronic sequence from K IX through Mn XV

The seven spectra K IX through Mn XV have been analyzed and the series limits determined. We present the adopted wavelengths and the derived energy levels and term splittings. The highly ionized atoms were produced in a spark source and recorded mainly on a 3 m grazing incidence spectrograph. Many new lines have been identified and many previously given wavelengths have been revised. All wavelengths have been examined for consistency by least-squares-fitting procedures and other tests. These procedures indicated misidentified lines and incorrect wavelengths which we corrected when possible. A discussion of the errors is given.

Cohen, L.↗

Results from the Ariel 5 All-Sky Monitor

Results are summarized for the first year of operation of the Ariel 5 All-Sky Monitor. The monitor is described in detail, and representative observations of the transient sources A1524-62, Cen X-mas, A0535+26, and A0620-00 are discussed. It is shown that the transients are largely confined to the galactic plane and that about 100 such sources per year can be expected in the Galaxy. Long-term observations of Sco X-1, Cyg X-3, and Cyg X-1 are reported which illustrate that the large intensity variations in Sco X-1 appear to correlate on time scales greater than one Ariel 5 orbit, that Cyg X-3 has a widely varying intensity, and that the predominant feature of the intensity variation in Cyg X-1 is a minimum near superior conjunction.

Holt, S. S.↗