Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SINTERED MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Synthesis and properties of Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} perovskite cathode material for intermediate temperature solid-oxide fuel cells

A highly stable perovskite cathode material, Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} (BSCZF) for intermediate temperature solid-oxide fuel cells (IT-SOFCs) was synthesized via the improved EDTA-citric acid complexing technique combined with high-temperature sintering. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectra (EIS) measurements. An electrolyte-supported BSCZF/SDC/Ni-SDC fuel cell was fabricated to evaluate the performance of the material. The XRD study indicates that the sintering temperature higher than 950 deg. C is sufficient to the formation of clean single BSCZF perovskite phase. Due to the incorporation of Zr ions, BSCZF perovskite exhibit lower electrical conductivity with higher activation energy but higher structural stability than the Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}} (BSCF) parent oxide. The maximum electrical conductivity of BSCZF attains 16.9 S cm{sup -1} at around 540 deg. C. Impedance spectra showed that the ASRs of BSCZF cathode on samaria doped ceria (Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9}, SDC) electrolyte are low but are still slightly larger than those of BSCF at similar conditions. The BSCZF/SDC/Ni-SDC cell exhibited a stable output with the maximum power densities of 30, 75, 139 and 241 mW cm{sup -2} at 550, 600, 650 and 700 deg. C, respectively. Due to the high electrochemical performances as well as the excellent stability, BSCZF perovskite may be an attractive cathode material for IT-SOFCs.

36 MATERIALS SCIENCE↗

Ceramics in gas turbine: Powder and process characterization

Some of the intrinsic properties of various forms of Si3N4 and SiC are listed and limitations of such materials' availability are pointed out. The essential features/parameters to characterize a batch of powder are discussed including the standard techniques for such characterization. In process characterization, parameters in sintering, reaction sintering, and hot pressing processes are discussed including the factors responsible for strength limitations in ceramic bodies. Significant improvements in material properties can be achieved by reducing or eliminating the strength limiting factors with consistent powder and process characterization along with process control.

Dutta, S.↗

Resin chemistry and particle size influence on stereolithography with silicon carbide

Stereolithography (SLA) is an established process able to produce high resolution polymer parts with complex geometries. Silicon carbide (SiC) has uses in a variety of applications, but traditionally was difficult to manufacture into complex geometries. There have been advances in producing SiC through SLA using a SiC-derived ceramic such as silicon oxycarbide (SiOC). In this study, a slurry using a commercially available resin as the base material with additional modifiers was investigated to create a SiC slurry ready for pressureless sintering. The effects of photoinitiator, dispersant and a bimodal distribution of SiC particle sizes was studied using a design of experiments (DOE). A slurry with a bimodal distribution of 70 % coarse and 30 % fine SiC powder at 40 % solids loading by volume was prepared and successfully printed. Rheology measurements show the slurry to have viscoelastic shear thinning behavior below the recommended 1000 Pas necessary for printing. Printing parameters for the new material on a commercially available SLA printer were studied parametrically. The laser marking speeds found to print the slurry was 260 mm/s and 130 mm/s. A slurry and printing parameters were determined to produce a green part with a proposed debinding cycle.

Herd, Tien [ORNL]↗

Synthesis of submicron CaZrO{sub 3} in combustion reactions

Submicron CaZrO{sub 3} powder is obtained in combustion reactions (solution combustion synthesis—SCS) with glycine. It is found that SCS reduces the sintering temperature of CaZrO{sub 3} powders. The dielectric properties of calcium zirconate ceramics are studied by the electrochemical impedance method. It is shown that a ceramics of powders obtained by the SCS method has high dielectric characteristics.

36 MATERIALS SCIENCE↗

Photocatalytic activities of ultra-small β-FeOOH and TiO{sub 2} heterojunction structure under simulated solar irradiation

Highlights: • Ultra small β-FeOOH with TiO{sub 2} in heterojunction showed good photocatalytic activity under simulated solar irradiation. • Significant improvement of photocatalytic activity compared to pristine TiO{sub 2}. • The as prepared catalyst decoloured industrial textile effluent within 30 min. - Abstract: Photocatalytic performance of β-FeOOH/TiO{sub 2} heterojunction structure, created from ultra-small β-FeOOH nanorods (2–6 nm diameter) and spherical anatase phase of TiO{sub 2} nanoparticles (∼100 nm), is reported in this study. Three different β-FeOOH mol% of (2, 5 and 10%) β-FeOOH/TiO{sub 2} composite was prepared. 5% β-FeOOH/TiO{sub 2} composite material showed the highest photocatalytic activity. XRD, high temperature XRD, FTIR, TEM, UV–vis diffuse reflectance spectra (DRS) were used to characterise the prepared catalyst. The developed catalyst showed excellent photocatalytic activity in photodegradation of methyl orange (MO) than β-FeOOH and TiO{sub 2} under simulated solar irradiation. Two commercial metal complex dyes and real textile effluent were efficiently photodegraded under identical conditions. The developed catalyst exhibited good recyclability without the need of sintering. No significant loss in efficiency was observed during the recycling cycle. These characteristics highlight the potential application of the developed photocatalyst in textile effluent treatment via photocatalysis. The enhanced photocatalytic activity was attributed to the relative energy band positions and very good electron, e{sup −} and hole, h{sup +} conduction ability of TiO{sub 2} and β-FeOOH particles respectively.

36 MATERIALS SCIENCE↗

Etching-assisted upcycling of Ni-lean to Ni-rich cathode materials

Upcycling is recognized as a sustainable recycling approach for spent lithium-ion batteries. However, existing upcycling methods typically involve intricate pretreatment or post-treatment steps, complicating their practical application. Here, in this study, we propose a straightforward, etching-assisted upcycling method that effectively transforms polycrystalline Ni-lean cathodes into high-performance single crystal Ni-rich cathodes. During the etching step, nickel acetate was dissolved into acetic acid and then polycrystalline NMC111 are etched in the solution. Finally, polycrystalline NMC111 are converted into single crystal particles coated with amorphous nickel acetate. This significantly enhances elemental diffusion during subsequent sintering by minimizing both particle size and the contact distance between NMC111 and nickel acetate. As elemental diffusion is improved and acetate ions decompose completely during sintering, the process requires neither additional pretreatment nor post-treatment. The resulting cathode materials (Etched-UP622) exhibit superior structural and electrochemical properties compared to the Control622, achieving an energy density of 719.7 Wh/kg, approximately 56.7 mAh/g higher than Control622 and 125.5 Wh/kg higher than NMC111. Etched-UP622 also delivers higher discharge capacity, improved rate performance and cycling stability, surpassing Control622 and NMC111. Meanwhile, NMC811 also can be synthesized by the proposed strategy, and the discharge capacity can reach 166.9 mAh/g at 1C, similar to 14 mAh/g higher than Control811. Overall, this etching-assisted strategy simplifies the upcycling process and offers a scalable, sustainable route for producing high-quality cathode materials.

Acid etching↗

Trends in Adhesion Energies of Metal Nanoparticles on Oxide Surfaces: Understanding Support Effects in Catalysis and Nanotechnology

Nanoparticles on surfaces are ubiquitous in nanotechnologies, especially in catalysis, where metal nanoparticles anchored to oxide supports are widely used to produce and use fuels and chemicals, and in pollution abatement. Here we show that for hemispherical metal particles of the same diameter, D , the chemical potentials of the metal atoms in the particles (μ M ) differ between two supports by approximately –2( E adh,A – E adh,B ) V m / D , where E ad,i is the adhesion energy between the metal and support i, and V m is the molar volume of the bulk metal. This is consistent with calorimetric measurements of metal vapor adsorption energies onto clean oxide surfaces where the metal grows as 3D particles, which proved that μ M increases with decreasing particle size below 6 nm and, for a given size, decreases with E adh . Since catalytic activity and sintering rates correlate with metal chemical potential, it is thus crucial to understand what properties of catalyst materials control metal/oxide adhesion energies. Trends in how E adh varies with the metal and the support oxide are presented. For a given oxide, E adh increases linearly from metal to metal with increasing heat of formation of the most stable oxide of the metal (per mole metal), or metal oxophilicity, suggesting that metal–oxygen bonds dominate interfacial bonding. For the two different stoichiometric oxide surfaces that have been studied on multiple metals (MgO(100) and CeO 2 (111), the slopes of these lines are the same, but their offset is large ( ~2 J/m 2 ). Adhesion energies increase as MgO(100) ≈ TiO 2 (110) < α-Al 2 O 3 (0001) < CeO 2 (111) ≈ Fe 3 O 4 (111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of Cu and Fly Ash Composite by Powder Metallurgy Technique

Cu and Fly Ash (FA) mixtures with different weight percentages were prepared. Pellets of the mixture powder were produced with the dimension of 17.7 mm in diameter and 10-15 mm in height. These different composites were compacted at a constant pressure of 280 MPa. One of the selected weight percentages was then compacted to form into pellet and sintered at different temperatures which were at 900, 950 and 1000 deg. C respectively for 2 hours. Density of green pellet was measured before sintered in furnace. After sintering, all the pellets with different temperatures were re-weighed and sintered density were calculated. The densification of the green and sintered pellets was required to be measured as one of the parameter in selection of the best material properties. Porosity of the pellet shall not be ignored in order to analyze the close-packed particles stacking in the pellet. SEM micrograph had been captured to observe the presence of pores and agglomeration of particles in the sample produced.

36 MATERIALS SCIENCE↗

Fabrication of Silicon Nitride Ceramics with Pore Gradient Structure

In the present study, Si{sub 3}N{sub 4} ceramics with pore gradient structure were prepared by spark plasma sintering (SPS) technique. Silicon nitride ceramics with different controlled porosities were prepared by using ZrP{sub 2}O{sub 7} as a binder material and heat treated at 1100 deg. C in a pressureless nitrogen atmosphere. Si{sub 3}N{sub 4} ceramics with controlled porosity of 34-47% were obtained. The distribution of porous structure was homogenous. Fully dense Si{sub 3}N{sub 4} ceramics could be sintered at 1400{approx}1600 deg. C by using MgO and alumina Al{sub 2}O{sub 3} as the sintering aids. Pore gradient structure was formed by laminating the Si{sub 3}N{sub 4} porous ceramics and powder mixture was used to obtain fully dense ceramics, and then sintering at 1400-1600 deg. C. Microstructure of sintered samples was observed by scanning electronic microscope (SEM) and the change of phase compositions was analyzed by X-ray diffraction (XRD). The results showed that these samples exhibited a good porous graded structure with a highly porous layer and a dense surface layer. The major phase of the Si{sub 3}N{sub 4} ceramics was still {alpha} phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predicting sintering window during supersolidus liquid phase sintering of steels using feedstock analysis and CALPHAD

Binder jet 3D printing results in carbon pickup from the binder at the inter-particle regions during binder burnout. The excess carbon lowers the solidus temperature of the green part locally during supersolidus liquid phase sintering (SLPS). Currently, thermodynamic calculations rely on the use of bulk powder compositions to predict the sintering window. This can overestimate the sintering temperature since the local increase in carbon on powder surfaces is not accounted for, that can locally lower the solidus temperature during SLPS. Here we show that using the inputs from feedstock and binder analysis, the excess carbon and hence the sintering window for the alloy can be predicted using CALPHAD. We present a case study on applying the proposed approach for pressureless sintering of binder jet additive manufactured (BJAM) of H13 steel via SLPS.

36 MATERIALS SCIENCE↗

Synthesis and characterization of aluminium–alumina micro- and nano-composites by spark plasma sintering

Graphical abstract: The evolution of microstructure by varying the particle size of reinforcement in the matrix employing spark plasma sintering has been demonstrated here in Al–Al{sub 2}O{sub 3} system. An emphasis has been laid on varying the reinforcement particle size and evaluating the microstructural morphologies and their implications on mechanical performance of the composites. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) reinforced in aluminium matrix were fabricated by powder metallurgy route using spark plasma sintering technique technique at a temperature of 773 K and pressure of 50 MPa. Another set of specimens having composition 1, 5, 20 vol.% of alumina (average size ∼ 10 μm) had been fabricated to compare the physical as well as mechanical attributes of the microcomposite as well as the nanocomposites. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation measurements. The alumina nanoparticles revealed an interface showing appreciable physical intimacy with the aluminium matrix compared to that of the alumina microparticles. The interfacial integrity in case of nanocomposites is better than in the microcomposite which has been studied using microscopic techniques. Spark plasma sintering imparts enhanced densification as well as matrix-reinforcement proximity which has been corroborated with the experimental results. - Highlights: • The Al–Al{sub 2}O{sub 3} micro- and nano-composites fabricated by spark plasma sintering. • Better matrix-reinforcement integrity in nanocomposites than microcomposites. • Spark plasma sintering method results in higher density and hardness values. • High density and hardness values of nanocomposites than microcomposites. • High dislocation density in spark plasma sintered Al–Al{sub 2}O{sub 3} composites. - Abstract: In the present study, an emphasis has been laid on evaluation of the microstructural morphologies and their implications on mechanical performance of the composites by varying the reinforcement particle size. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) and microcomposites of 1, 5, 20 volume % of alumina (average size ∼ 10 μm) reinforced in aluminium matrix were fabricated by spark plasma sintering technique at a temperature of 773 K and pressure of 50 MPa. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation hardness measurements. The alumina nanoparticles revealed appreciable physical intimacy with the aluminium matrix than that of alumina microparticles. The highest nanohardness recorded 0.85 GPa and 99% densification for 7 and 1 vol.% Al–Al{sub 2}O{sub 3} nancomposites respectively. Spark plasma sintering imparts enhanced densification and matrix-reinforcement proximity which have been corroborated with the experimental results.

36 MATERIALS SCIENCE↗

An Aerosol Jet Printed Resistance Temperature Detector‐Micro Hotplate with Temperature Coefficient of Resistance Stabilized by Electrical Sintering

Abstract Aerosol jet printing (AJP) is an emerging direct write tool enabling rapid prototyping and fabrication of electronics components. AJP provides faster and less expensive production of devices with feature sizes of >10 microns compared to traditional MEMS processes. Herein, the fabrication of a resistance temperature detector‐micro hotplate (RTD‐µHP) is reported using AJP printed silver. AJP eliminates sophisticated MEMS processes such as masking, alignment, and etching. The compatibility of the AJP process with a broad range of materials is demonstrated by printing highly resolved lines on rigid and flexible substrates. Optimal thermal sintering conditions of AJP printed silver (Ag) lines are found by in situ resistance measurements. To stabilize the temperature coefficient of resistance (TCR) of the RTD‐µHP at high operating current levels, electrical sintering is performed on the RTD‐µHPs. Electrical sintering improves the conductivity of fully thermally sintered Ag RTD‐µHPs by 32% and provides a burn‐in mechanism for stabilizing the TCR. The TCR of the RTD‐µHPs after electrical sintering is 3.80 × 10 −3 at 22 °C, close to the value for bulk Ag. The performance of the RTD‐µHPs is tested using a reference thermocouple. The RTD‐µHPs show reliable and repeatable heating and temperature sensing up to 70 °C in air.

Sui, Yongkun↗

Consolidation Process in Near Net Shape Manufacturing of Armstrong CP-Ti/Ti-6Al-4V Powders

This paper summarizes our recent efforts to develop the manufacturing technologies of consolidated net-shape components by using new low-cost commercially pure titanium (CP-Ti) and Ti-6Al-4V alloy powders made by the Armstrong process. Fabrication processes of net shape/ near net shape components, such as uniaxial die-pressing, cold isostatic pressing (CIP), sintering, roll compaction and stamping, have been evaluated. The press-and-sinter processing of the powders were systematically investigated in terms of theoretical density and microstructure as a function of time, pressure, and temperature. Up to 96.4% theoretical density has been achieved with the press-and-sinter technology. Tensile properties of the consolidated samples exhibit good ductility as well as equivalent yield/ultimate tensile strengths to those of fully consolidate materials, even with the presence of a certain amount of porosity. A consolidation model is also under development to interpret the powder deformation during processing. Net shape components made of the Armstrong powder can successfully be fabricated with clearer surface details by using press-and-sinter processing.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF CRYSTALLINE CERAMICS FOR IMMOBILIZATION OF ADVANCED FUEL CYCLE REPROCESSING WASTES

The Savannah River National Laboratory (SRNL) is developing crystalline ceramic waste forms to incorporate CS/LN/TM high Mo waste streams consisting of perovskite, hollandite, pyrochlore, zirconolite, and powellite phase assemblages. Simple raw materials, including Al{sub 2}O{sub 3}, CaO, and TiO{sub 2} were combined with simulated waste components to produce multiphase crystalline ceramics. Fiscal Year 2011 (FY11) activities included (i) expanding the compositional range by varying waste loading and fabrication of compositions rich in TiO{sub 2}, (ii) exploring the processing parameters of ceramics produced by the melt and crystallize process, (iii) synthesis and characterization of select individual phases of powellite and hollandite that are the target hosts for radionuclides of Mo, Cs, and Rb, and (iv) evaluating the durability and radiation stability of single and multi-phase ceramic waste forms. Two fabrication methods, including melting and crystallizing, and pressing and sintering, were used with the intent of studying phase evolution under various sintering conditions. An analysis of the XRD and SEM/EDS results indicates that the targeted crystalline phases of the FY11 compositions consisting of pyrochlore, perovskite, hollandite, zirconolite, and powellite were formed by both press and sinter and melt and crystallize processing methods. An evaluation of crystalline phase formation versus melt processing conditions revealed that hollandite, perovskite, zirconolite, and residual TiO{sub 2} phases formed regardless of cooling rate, demonstrating the robust nature of this process for crystalline phase development. The multiphase ceramic composition CSLNTM-06 demonstrated good resistance to proton beam irradiation. Electron irradiation studies on the single phase CaMoO{sub 4} (a component of the multiphase waste form) suggested that this material exhibits stability to 1000 years at anticipated self-irradiation doses (2 x 10{sup 10}-2 x 10{sup 11} Gy), but that its stability may be rate dependent, therefore limiting the activity of the waste for which it can be employed. Overall, these preliminary results indicate good radiation damage tolerance for the crystalline ceramic materials. The PCT results showed that, for all of the waste forms tested, the normalized release values for most of the elements measured, including all of the lanthanides and noble metals, were either very small or below the instrument detection limits. Elevated normalized release values were measured only for Cs, Mo, and Rb. It is difficult to draw further conclusions from these data until a benchmark material is developed for the PCT with this type of waste form. Calcined, simulated CS/LN/TM High Mo waste without additives had relatively low normalized release values for Cs, Mo, and Rb. A review of the chemical composition data for this sample showed that these elements were well retained after the calcination. Therefore, it will be useful to further characterize the calcined material to determine what form these elements are in after calcining. This, along with single phase studies on Cs containing crystal structures such as hollandite, should provide insight into the most ideal phases to incorporate these elements to produce a durable waste form.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electric Discharge Sintering and Joining of Tungsten Carbide--Cobalt Composite with High-Speed Steel Substrate

Simultaneous electro discharge sintering of high strength structure of tungsten carbide-cobalt composite and connection it with high-speed steel substrate is investigated and suitable operating parameters are defined. Tungsten carbide-cobalt and high-speed steel joining was produced by the method of high voltage electrical discharge together with application of mechanical pressure to powder compact. It was found that the density and hardness of composite material reach its maximum values at certain magnitudes of applied pressure and high voltage electrical discharge parameters. We show that there is an upper level for the discharge voltage beyond which the powder of composite material disintegrates like an exploding wire. Due to our results it is possible to determine optimal parameters for simultaneous electro discharge sintering of WC-Co and bonding it with high-speed steel substrate.

36 MATERIALS SCIENCE↗

Dielectric Performance of High Purity HTCC Alumina at High Temperatures - A Comparison Study with Other Polycrystalline Alumina

A very high purity (99.99+) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this co-fired material. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96 polycrystalline alumina (96 Al2O3), where 96 alumina was used as the benchmark. A prototype packaging system based on regular 96 alumina with Au thick-film metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500C. In order to evaluate this new HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96 alumina and a LTCC alumina from room temperature to 550C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96 alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

High temperature↗