Scalable Advanced Li(Ni 0.8 Co 0.1 Mn 0.1 )O 2 Cathode Materials from a Slug Flow Continuous Process
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Graphite, widely adopted as an anode for lithium-ion batteries (LIBs), faces challenges such as an unsustainable supply chain and sluggish rate capabilities. This emphasizes the urgent need to explore alternative anode materials for LIBs, aiming to resolve these challenges and drive the advancement of more efficient and sustainable battery technologies. The present research investigates the potential of lead zirconate titanate (PZT: PbZr 0.53 Ti 0.47 O 3 ) as an anode material for LIBs. Bulk PZT materials were synthesized by using a solid-state reaction, and the electrochemical performance as an anode was examined. A high initial discharge capacity of approximately 686 mAh/g was attained, maintaining a stable capacity of around 161 mAh/g after 200 cycles with diffusion-controlled intercalation as the primary charge storage mechanism in a PZT anode. These findings suggest that PZT exhibits a promising electrochemical performance, positioning it as a potential alternative anode material for LIBs.
Hydrogen-based reduction of iron ore for iron and steel production has emerged as a promising alternative to coal and natural gas. Unlike other hydrogen-based iron ore reduction studies, this research focuses on a wide temperature range across 900–1590 °C, encompassing reduction in solid, mixed, and liquid (slag) phases. For a 20 min exposure to hydrogen, the reduction degree increased monotonically from ∼35% at 900 °C to >90% at 1550 °C, except between 1100 °C and 1400 °C, where it stagnated ∼60%. This experimental work challenges the widely accepted notion that higher temperatures enhance the reduction process. Instead, it reveals an overlooked kinetic bottleneck, suggesting complex thermodynamic and mass transfer limitations influenced by phase transformations, diffusion barriers, and microstructural changes. Density functional theory-based molecular dynamics simulations indicate that oxygen diffusivity in BCC iron is 3.88 × 10 –5 cm 2 /s which is ∼5–10 times higher than that in FCC iron. This study reports that this stagnant reduction degree in the mixed solid–liquid phase is due to competition of multiple mechanisms, such as surface- and bulk-diffusion, pore collapse mechanisms, and crystallographic transitions.
Not Available
We have re-examined the crystal structure and the physical properties of VOSe{sub 2}O{sub 5} by performing single crystal X-ray and powder neutron diffraction, alternating current (AC) and direct current (DC) magnetization measurements, heat capacity, dielectric properties, and second-harmonic generation (SHG) measurements. From these studies, we observed that the compound undergoes three magnetic transitions near 4, 5.5, and 8 K. In addition, we observed ferrimagnetic behavior as the magnetic ground state, confirmed by the isothermal magnetization measured below 8 K that reveals a saturated magnetic moment of 0.5 {mu}{sub B} per formula unit, consistent with density functional calculations of the magnetically ordered ground state. We propose a ferrimagnetic spin arrangement that is consistent with neutron diffraction measurements as well. Frequency dependence in the AC magnetic susceptibility, observed at 5.5 K, is considered as short-range magnetic ordering and may be associated with the competition between nearest neighbor and next nearest neighbor interactions of the V{sup 4+} cations. A dielectric anomaly near 240 K and non-centrosymmetric functional properties, notably, second harmonic generation and electric polarization, are also discussed.
Substituted metal oxides containing ionic species have been attracting a great deal of attention because of their potential ability to reduce the usage of precious metals in heterogeneous catalysts. We investigate Pd-substituted CeO 2 for C-H bond activation reactions including the partial oxidation and dry reforming of CH 4 . This catalyst has been previously studied for CO oxidation, NO x reduction, and the water-gas shift reaction. Pd-substituted CeO 2 , Ce 1-x Pd x O 2-δ , was prepared as a powder with high surface area and a hollow sphere morphology using ultrasonic spray pyrolysis. The catalysts were extensively characterized using synchrotron X-ray diffraction and other techniques, confirming phase pure samples up to 10 mol % Pd substitution. Ce 0.95 Pd 0.05 O 2-δ was found to be active for partial oxidation of CH 4 around 500 °C and higher. Our studies, including postcatalytic synchrotron diffraction, suggest that the single-phase Ce 1-x Pd x O 2-δ material is not the active species and that catalysis occurs instead over the reduced two-phase Pd 0 /CeO 2 . This observation has been further confirmed by verifying the activity of the reduced Pd 0 /CeO 2 catalysts for ethylene hydrogenation, a reaction that is known to require Pd 0 .
Ce{sup 3+}-substituted aluminum garnet compounds of yttrium (Y{sub 3}Al{sub 5}O{sub 12}) and lutetium (Lu{sub 3}Al{sub 5}O{sub 12}) - both important compounds in the generation of (In,Ga)N-based solid state white lighting - have been prepared using a simple microwave heating technique involving the use of a microwave susceptor to provide the initial heat source. Carbon used as the susceptor additionally creates a reducing atmosphere around the sample that helps stabilize the desired luminescent compound. High quality, phase-pure materials are prepared within a fraction of the time and using a fraction of the energy required in a conventional ceramic preparation; the microwave technique allows for a reduction of about 95% in preparation time, making it possible to obtain phase pure, Ce{sup 3+}-substituted garnet compounds in under 20 min of reaction time. It is estimated that the overall reduction in energy compared with ceramic routes as practiced in the lab is close to 99%. Conventionally prepared material is compared with material prepared using microwave heating in terms of structure, morphology, and optical properties, including quantum yield and thermal quenching of luminescence. Finally, the microwave-prepared compounds have been incorporated into light-emitting diode 'caps' to test their performance characteristics in a real device, in terms of their photon efficiency and color coordinates.
Explore the source record for details and available documents.
The orthosilicate phosphors Sr x Ba 2–x SiO 4 :Eu 2+ have now been known for over four decades and have found extensive recent use in solid-state white lighting. It is well-recognized in the literature and in practice that intermediate compositions in the solid-solutions between the orthosilicates Sr 2 SiO 4 and Ba 2 SiO 4 yield the best phosphor hosts when the thermal stability of luminescence is considered. We employ a combination of synchrotron X-ray diffraction, total scattering measurements, density functional theory calculations, and low-temperature heat capacity measurements, in conjunction with detailed temperature- and time-resolved studies of luminescence properties to understand the origins of the improved luminescence properties. We observe that in the intermediate compositions, the two cation sites in the crystal structure are optimally bonded as determined from bond valence sum calculations. Optimal bonding results in a more rigid lattice, as established by the intermediate compositions possessing the highest Debye temperature, which are determined experimentally from low-temperature heat capacity measurements. Greater rigidity in turn results in the highest luminescence efficiency for intermediate compositions at elevated temperatures.
La{sub 4}LiAuO{sub 8} and La{sub 2}BaPdO{sub 5}, two previously known oxides, are presented as model compounds for examining the role of isolated and immobilized Au{sup 3+} and Pd{sup 2+} ions in heterogeneous catalysis. Structural characterization, stability, surface composition, and electronic structure of these compounds are presented. These are examined in studies ranging from synchrotron X-ray scattering, including pair distribution function (PDF) and maximum entropy method (MEM) analysis, to density functional calculations of the electronic structures. The exceptional stability displayed by these compounds as verified by thermogravimetric analysis can be attributed to the presence of covalent Au-O and Pd-O interactions revealed in MEM studies, which suggests a criterion for stabilizing these highly oxophobic transition metals in oxide environments. Catalytic testing of the two compounds as heterogeneous catalysts in the oxidation of CO to CO{sub 2} are presented. La{sub 2}BaPdO{sub 5} appears to be an effective catalyst for CO oxidation, despite the low surface area of the oxide being used. This is the first time that a fully ordered (rather than doped) Pd{sup 2+} oxide had been used to catalyze CO oxidation. La{sub 4}LiAuO{sub 8} on the other hand, is much less effective at catalyzing CO oxidation. Differences in the reactivities of the two compounds are discussed with respect to differences in their density functional electronic structures.
Abstract not provided
Two new oxides have been unambiguously identified as Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} with {delta} = 0.14(1) and Bi{sub 3}TcO{sub 8} through X-ray absorption near-edge structure spectroscoy and neutron powder diffraction. The compound Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} has a cubic pyrochlore-type structure with {alpha} = 10.4746(1) {angstrom}, space group Fd{sub 3}m (origin choice 2), and Z = 8. The compound Bi{sub 3}TcO{sub 8} is also cubic, {alpha} = 11.5749(1) {angstrom}, space group P2{sub 1}3, Z = 8, and has a fluorite-related crystal structure. In Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} the Tc(IV) cations are octahedrally coordinated, whereas in Bi{sub 3}TcO{sub 8} the Tc(VII) cations are tetrahedrally coordinated. A third new phase, probably Bi{sub 3}Tc{sub 3}O{sub 11}, could not be obtained pure, but preliminary X-ray powder diffraction data affords a primitive cubic lattice with {alpha} = 9.3433(1) {angstrom}. On the basis of structural similarities between Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} and closely related oxides, Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} is expected to be a metallic oxide with Pauli paramagnetism. Electronic structure calculations of both Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} and Bi{sub 3}TcO{sub 8} further support metallic conductivity in the former and insulating behavior in the latter. The inert pair effect of the Bi cations on the crystal structures of Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} and Bi{sub 3}TcO{sub 8} is also described. In addition, calculations of the valence electron localization function for Bi{sub 2}Tc{sub 2}O{sub 7-{delta}} and Bi{sub 3}TcO{sub 8} provide further visualization of the Bi 6s{sup 2} lone pair electrons in the real space of the crystal structures.
We report the synthesis and characterization of new structural variants of the isotypic compound with the generic chemical formula, Co{sub 1-0.5x}{sup oct}Co{sub x}{sup tet}(OH){sub 2}(Cl){sub x}(H{sub 2}O){sub n}, all modifications of an {alpha}-Co(OH){sub 2} lattice. We show that the occupancy of tetrahedrally coordinated cobalt sites and associated chloride ligands, x, is modulated by the rate of formation of the respective layered hydroxide salts from kinetically controlled aqueous hydrolysis at an air-water interface. This new level of structural control is uniquely enabled by the slow diffusion of a hydrolytic catalyst, a simple technique. Independent structural characterizations of the compounds separately describe various attributes of the materials on different length scales, revealing details hidden by the disordered average structures. The precise control over the population of distinct octahedrally and tetrahedrally coordinated cobalt ions in the lattice provides a gentle, generic method for modulating the coordination geometry of cobalt in the material without disturbing the lattice or using additional reagents. A mechanism is proposed to reconcile the observation of the kinetic control of the structure with competing interactions during the initial stages of hydrolysis and condensation.
We have investigated the paraelectric-to-ferroelectric phase transition of various sizes of nanocrystalline barium titanate (BaTiO{sub 3}) by using temperature-dependent Raman spectroscopy and powder X-ray diffraction (XRD). Synchrotron X-ray scattering has been used to elucidate the room temperature structures of particles of different sizes by using both Rietveld refinement and pair distribution function (PDF) analysis. We observe the ferroelectric tetragonal phase even for the smallest particles at 26 nm. By using temperature-dependent Raman spectroscopy and XRD, we find that the phase transition is diffuse in temperature for the smaller particles, in contrast to the sharp transition that is found for the bulk sample. However, the actual transition temperature is almost unchanged. Rietveld and PDF analyses suggest increased distortions with decreasing particle size, albeit in conjunction with a tendency to a cubic average structure. These results suggest that although structural distortions are robust to changes in particle size, what is affected is the coherency of the distortions, which is decreased in the smaller particles.
Explore the source record for details and available documents.
Interactions of fluoride anions and organocations with crystalline silicate frameworks are shown to depend subtly on the architectures of the organic species, which significantly influence the crystalline structures that result. One- and two-dimensional (2D) {sup 1}H, {sup 19}F, and {sup 29}Si nuclear magnetic resonance (NMR) spectroscopy measurements establish distinct intermolecular interactions among F{sup -} anions, imidazolium structure-directing agents (SDA{sup +}), and crystalline silicate frameworks for as-synthesized siliceous zeolites ITW and MTT. Different types and positions of hydrophobic alkyl ligands on the imidazolium SDA{sup +} species under otherwise identical zeolite synthesis compositions and conditions lead to significantly different interactions between the F{sup -} and SDA{sup +} ions and the respective silicate frameworks. For as-synthesized zeolite ITW, F{sup -} anions are established to reside in the double-four-ring (D4R) cages and interact strongly and selectively with D4R silicate framework sites, as manifested by their strong {sup 19}F{sup 29}Si dipolar couplings. By comparison, for as-synthesized zeolite MTT, F{sup -} anions reside within the 10-ring channels and interact relatively weakly with the silicate framework as ion pairs with the SDA{sup +} ions. Such differences manifest the importance of interactions between the imidazolium and F{sup -} ions, which account for their structure-directing influences on the topologies of the resulting silicate frameworks. Furthermore, 2D {sup 29}Si{l_brace}{sup 29}Si{r_brace} double-quantum NMR measurements establish {sup 29}Si-O-{sup 29}Si site connectivities within the as-synthesized zeolites ITW and MTT that, in conjunction with synchrotron X-ray diffraction analyses, establish insights on complicated order and disorder within their framework structures.