Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quench”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Coordination Chemistry and Photoluminescence of Sm(II) Dibenzo-24-crown-8 Complexes

Three Sm(II) dibenzo-24-crown-8 (db24c8) complexes were synthesized in anhydrous, air-free conditions via the reaction of SmI 2 with db24c8 and tetrabutylammonium tetraphenylborate ([TBA][BPh 4 ]; where needed) in acetonitrile (CH 3 CN), dimethoxyethane (DME), and tetrahydrofuran (THF) to yield [Sm(db24c8)(CH 3 CN) 2 ][BPh 4 ][I]·CH 3 CN, [Sm(db24c8)(DME)]I 2 , and [Sm(db24c8)(THF) 2 ]I 2 , respectively. In each case, a 10-coordinate, staggered dodecahedral (2:6:2) environment is formed around the Sm 2+ center that is completed by either two solvent molecules (CH 3 CN or THF) or one bidentate solvent molecule (DME). Inner-sphere solvent molecules can be excluded by reacting SmI 2 with db24c8 in 1:3 THF:toluene to yield Sm(db24c8)I 2 . Here, this molecule features a distorted, eight-coordinate, hexagonal pyramidal Sm 2+ metal center, where the coordinated db24c8 molecule shows a torsion angle unexpectedly close to the 180° antiperiplanar arrangement and two uncoordinated db24c8 oxygen atoms. Solution UV–vis–NIR measurements demonstrate that Sm 2+ is a good size match for the cavity of various db24c8 conformations and that Eu 2+ and Yb 2+ exhibit competition between acetonitrile solvation and the Eu 2+ and Yb 2+ /db24c8 complexes in solution. During excitation by 546 nm light, both [Sm(db24c8)(DME)]I 2 and [Sm(db24c8)(THF) 2 ]I 2 exhibit mixed 5d → 4f and 4f → 4f emission at 20 °C and exclusively 4f → 4f at −180 °C, whereas Sm(db24c8)I 2 only shows 5d → 4f emission regardless of temperature. Photoluminescence from [Sm(db24c8)(CH 3 CN) 2 ][BPh 4 ][I]·CH 3 CN is quenched.

Cations↗
DOE OSTI2025

Thermochemical Properties of a Water-Soluble Zr(IV)-Flavonolate Complex for Fluoride Sensing

Detection of fluoride in water samples is critical for monitoring many chemical, environmental, and biological processes, however, these measurements often rely on costly instrumentation. Here, this situation has motivated the design of simple to use, fieldable fluoride sensors. Previously, a fluorometric sensor based on (EDTA)­Zr­(H 2 O) 2 (EDTA = ethylenediamine-N,N,N′,N′-tetraacetate) and 3-hydroxyflavone (FlvH) was reported for fluoride detection in ethanol-H 2 O mixtures. Herein, we report the synthesis and characterization of the previously proposed Zr­(IV)-flavonolate complex as the dimethylammonium salt, [(EDTA)­Zr­(Flv)]­[NMe 2 H 2 ] (Flv = 3-hydroxyflavonolate), and detail its utility for aqueous fluoride sensing. This species exhibits an intense blue fluorescence upon excitation with near-UV light (λ ex = 390 nm; λ em = 460 nm) that is quenched in the presence of NaF (100 mM acetate buffer, pH = 5) with good sensitivity (LOD = 20.9 nM; [F – ] from 10 –8 to 10 –4 M) under neat aqueous conditions. The equilibrium constant (K eq = 1.26 ± 0.00184 × 10 8 M –2 ) and free energy (Δ$G^°_{\textrm{rxn}}$ = –11.0 kcal mol –1 ) were determined under the conditions used for fluoride sensing, indicating a highly favorable reaction with F – in water. Finally, we developed paper-based sensing strips for qualitative fluoride sensing by immobilizing the sensor in a deposited gel enabling good selectivity and reduced interference due to slower ion diffusion.

aqueous chemistry↗
DOE OSTI2026

Generalizing Reversible Triplet–Triplet Energy Transfer as a Strategy to Increase Excited-State Lifetime in Copper(I) Charge-Transfer Chromophores

In this work, we generalize reversible triplet–triplet energy transfer (TTET) as a strategy to achieve long (μs range) excited-state lifetimes in copper(I) photosensitizers of the general formula Cu(RNacNac)(CN-Ar) (RNacNac is a substituted β-diketiminate and CN-Ar is an aryl isocyanide). Six new complexes are presented where the isocyanide is substituted with a triplet–acceptor moiety─anthracene, naphthalene, or phenanthrene. In-depth photophysical analysis reveals that energetic matching of the charge-transfer ( 3 CT) and acceptor-localized 3 (π→π*) states is key to achieving long triplet excited-state lifetimes via reversible TTET. With 2-isocyanoanthracene as the acceptor ligand, 3 CT and 3(π→π*) are not energetically proximate, and irreversible quenching of 3 CT occurs. With a small 0.1–0.2 eV gap between the two triplet states, luminescence originates from the 3 CT state with a moderate excited-state lifetime of 250 or 283 ns observed. As key to the success of this approach, we demonstrate that altering the N-substituent on the RNacNac ligand modulates the energy of the 3 CT state, giving three complexes where the 3 CT and 3 (π→π*) energies are perfectly matched and the excited-state lifetimes are much longer, spanning 1.9–2.7 μs. As such, the key lesson of this work is that long triplet-state lifetimes in these compounds can be achieved by proper “mixing and matching” of the RNacNac ligand, which influences the 3 CT energy, and the triplet acceptor group which dictates the energy of the 3 (π→π*) state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tetrel Bond-Mediated Photophysical Modulation and Fluoride Recognition in Carbazole-Organosilanes

Silicon-centered orbitals are typically regarded as electronically inert in donor–acceptor systems. Here, we show that silole-based carbazole–silane architectures can render these orbitals electronically relevant, enabling modulation of excited-state behavior and anion-responsive photophysics. Two carbazole–Dipp–silanes exhibit identical carbazole-localized LE singlet emission in solution yet diverge markedly in the solid state: one compound displays a broad long-wavelength emission band in the prompt spectrum and enhanced long-lived emission consistent with a triplet-derived excited state, likely arising from a combination of intramolecular structural locking and solid-state packing effects, whereas the more flexible analogue remains predominantly LE-emissive. Fluoride coordination further differentiates the two systems, producing ratiometric red-shifted emission in one case and fluorescence quenching in the other through a fully reversible coordination process. These results identify σ*(Si–Ar) orbitals as tunable contributors to excited-state landscapes in organosilane luminophores and suggest a broader design strategy for controlling excited-state behavior in tetrel-based photofunctional systems.

Haque, Md Hasanul↗
DOE OSTI2022

Triple Emission of 5'-( para -R-Phenylene)vinylene-2-(2'-hydroxyphenyl)benzoxazole (PVHBO). Part I: Dual Emission from the Neutral Species

The effects of 5'-(para-R-phenylene)vinylene (PV) substituents on the emission properties of 2-(2'-hydroxyphenyl)benzoxazole (HBO) are analyzed using steady-state and time-resolved absorption and emission spectroscopies in addition to quantum chemical calculations. All members in the series of PVHBOs are capable of excited-state intramolecular proton transfer (ESIPT) with a solvent sensitivity that is typical of a HBO derivative to produce a normal (aka enol) emission and an excited-state tautomer (aka keto) emission. These two emission bands of the neutral dyes are discussed in the current paper. The intermolecular proton transfer, i.e., the deprotonation, of a PVHBO results in the third band of the triple emission, which is described in the succeeding paper. The placement of an electron-withdrawing substituent R on the PVHBO scaffold increases the intensity of the keto emission relative to the enol emission in hydrogen-bonding solvents. The R substituents do not significantly alter the wavelengths of the enol and keto emission bands, which are located in the blue and green regions, respectively, of the visible spectrum. The ultrafast time-resolved spectroscopies and quantum chemical calculations offer explanations on how the R group and the solvent affect the enol and keto emission properties (i.e., wavelength, lifetime, fluorescence quantum yield, and relative ratio of their emissions). Here, the key findings include the following: (1) the emission energies of both enol and keto forms are not sensitively dependent on the R substituent and (2) the solvent-engaged enol excited state is quenched more efficiently as the R substituent becomes more electron-withdrawing. A PVHBO acts as a fusion of HBO and stilbenoid that intersect at the hydroxyphenyl moiety. Depending on the solvent and other environmental conditions, PVHBOs may exhibit the ESIPT property of HBO or the substituent-dependent emission of stilbenoid. This paper and the succeeding article provide a photophysical model of PVHBOs to explain the wavelengths and relative abundances of the three emission bands (enol, keto, and anion) that these compounds are able to produce. Judicial selection of the environmental factors may drive the emission of a PVHBO into the spectral regions of blue, green, and, in a couple of cases, orange or red.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rate Coefficients for OH + NO (+N 2 ) in the Fall-off Regime and the Impact of Water Vapor

The termolecular, association reaction between OH and NO is a source of nitrous acid (HONO), an important atmospheric trace gas. Rate coefficients for the title reaction as recommended by evaluation panels differ substantially at the temperatures and pressures that prevail in the Earth’s boundary layer where the reaction is in the fall-off regime between low- and high-pressure limiting rate coefficients. Using pulsed laser methods for generation and detection of OH, we have reinvestigated the kinetics of the title reaction at pressures of 22–743 Torr (1 Torr = 1.333 hPa) and temperatures (273, 298, and 333 K) in pure N 2 and in N 2 –H 2 O bath gases. In situ optical absorption measurements were used to rule out any bias due to NO 2 or HONO impurities. Our rate coefficients (k 1 ) in N 2 bath gas are parametrized in terms of low-pressure (k o ) and high-pressure (k ∞ ) rate coefficients and a fall-off parameter (F C ) with k 1,0 N 2 = 7.24 × 10 –31 (T/300 K) –2.17 cm 6 molecule –2 s –1 , k 1,∞ = 3.3 × 10 –12 (T/300 K) –3 cm 3 molecule –1 s –1 , and F C = 0.53. Used with the “Troe” expression for termolecular reactions, these parameters accurately reproduce the current data in the fall-off regime and also capture literature rate coefficients at extrapolated temperatures. The presence of water vapor was found to enhance the rate coefficients of the title reaction significantly. The low-pressure limiting rate coefficient in H 2 O bath gas is a factor 5–6 larger than in N 2 , at room temperature (k 1,o H 2 O = 4.55 × 10 –30 (T/300 K) –4.85 cm 6 molecule –2 s –1 ) indicating that H 2 O is much more efficient in quenching the association complex HONO* through collisional energy transfer. Based on measurements in N 2 –H 2 O mixtures, a parametrization of k 1 including both N 2 and H 2 O as third-body quenchers was derived. Neglecting the effect of H 2 O results, e.g., in an underestimation of k 1 by >10% in the tropical boundary layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stress-Alteration Enhancement of the Reactivity of Aluminum Nanoparticles in the Catalytic Decomposition of exo -Tetrahydrodicyclopentadiene (JP-10)

High energy density aluminum nanoparticles (AlNP) upon thermal annealing followed by super-quenching results in elevated stress levels in the metallic core and reduced surface energy at the core-shell interface. Isomer-selective vacuum ultraviolet based photoionization mass spectrometry coupled to a high temperature chemical microreactor reveals that these stress-altered (SA) AlNPs exhibit distinctive temperature-dependent reactivities towards catalytic decomposition of the hydrocarbon jet fuel exo-tetrahydrodicyclopentadiene (JP-10, C 10 H 16 ) compared to untreated (UN) AlNPs. SA-AlNPs show a delayed initiation of the decomposition for JP-10 by 200 K relative to the UN-AlNPs, however, the full decomposition is achieved at 100 K lower temperature. Furthermore, there is less oxygenated products that are generated from the alumina surface-induced heterogeneous oxidation process, and a larger fraction of closed and open-shell hydrocarbons. Furthermore, chemical insight bridging the reactivity order of SA-AlNPs at low and high temperatures, simultaneously, is obtained via a detailed examination of the product branching ratios obtained in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Entropy-Driven Porous Liquids Allowing Gas Solubility in Solvent-Filled Imine-Based Porous Organic Cages

Porous liquids offer a promising platform for gas separation by combining fluid processability with intrinsic molecular porosity. Traditional Type II porous liquids are formed by dissolving porous molecular cages in size-excluded solvents, limiting solvent options and practical applications. In this work, we introduce a novel method of creating Type II porous liquids using common small solvents, where intrinsic porosity is achieved at elevated pressures due to the selective displacement of solvent molecules by gas molecules within the cage structures. Using molecular simulations, we investigate the behavior of CO 2 in solutions of the imine-based porous organic cage CC13 dissolved in small molecular solvents such as chloroform and 1,2-dimethoxyethane (DME). Grand canonical Monte Carlo simulations of solid-state CC13 reveal that selectivity reversal, where smaller CO 2 molecules displace larger solvent molecules inside the cage, is achievable at sufficiently high pressures. Temperature quench molecular dynamics simulations confirm that while CO 2 displacement within chloroform-filled cages is limited, DME enables entropy-driven cage CO 2 occupancy at pressures as low as ∼23 bar, setting up the foundation of an alternative way of forming Type II porous liquids.

adsorption↗
DOE OSTI2025

Photoactivation Transition State and Dynamical Response of the Orange Carotenoid Protein

The orange carotenoid protein (OCP) regulates light harvesting in cyanobacteria by acting as a photoreceptor in its resting form, OCP O , and by effecting the quenching of bilin excitons upon binding to the core of the phycobilisome in its photoactivated red form, OCP R . We show herein using fluorescence anisotropy measurements and the action spectra for the rate constants of the two light-driven steps in the mechanism that the photoactivation of the OCP from Synechocystis sp. PCC 6803 is triggered by excited-state motions of the canthaxanthin chromophore that yield a twisted and bent conformation. Well-tempered metadynamics simulations reveal that a bicycle-pedal configuration, due to twisting of the two adjacent C=C bonds at the C13−C14 and C15−C15′ positions in the center of canthaxanthin’s π-conjugated isoprenoid backbone, can be accommodated by the binding site in the OCP, with the energy of a captured photon required to cross the local activation energy barriers from the dark equilibrium structure. The bicycle-pedal configuration breaks the conserved hydrogen-bonding interactions between the carbonyl substituent of the β-ionone end ring of canthaxanthin and the adjacent W288 and Y201 residues in the C-terminal domain. The action spectra are modulated by the vibronic excitation prepared by absorption transitions to the S 2 state, indicating that the photoactivation reactions are triggered by the canthaxanthin chromophore well prior to vibrational equilibration. These findings show that an ultrafast structural response of the OCP protein to the excited-state motions of the canthaxanthin chromophore controls the photoactivation yield and the sensing of blue light.

Fluorescence↗
DOE OSTI2020

RbB 3 Si 3 : An Alkali Metal Borosilicide that is Metastable and Superconducting at 1 atm

The stability, electronic structure and potential superconductivity in AB 3 Si 3 (A = Na, K, Rb, and Cs) compounds that assume the clathrate-based sodalite structure whose frameworks consists of covalent B-Si bonds is investigated via first-principles calculations. This structure type has recently been predicted in a number of high temperature superconducting hydrides, but these are only stable under megabar pressures. Herein, we predict a novel superconducting phase, RbB 3 Si 3 , that could be synthesized under pressures that are a factor of ten smaller, ~10 GPa, and quenched to atmospheric conditions. Electron-phonon coupling calculations predict that RbB 3 Si 3 possesses a superconducting critical temperature, T c , of 14 K at 1 atm. Here, the dynamic stability of RbB 3 Si 3 and CsB 3 Si 3 at ambient pressure can be explained by considering the chemical pressure exerted on the B-Si framework that is caused by the size effect of the alkali metal atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Different Kinetic Reactivities of Electrons in Distinct TiO 2 Nanoparticle Trap States

Electrons added to TiO 2 and other semiconductors often occupy trap states, whose reactivity can determine the catalytic and stoichiometric chemistry of the material. We previously showed that reduced aqueous colloidal TiO 2 nanoparticles have two distinct classes of thermally equilibrated trapped electrons, termed Red/e – and Blue/e – . Presented here are parallel optical and electron paramagnetic resonance (EPR) kinetic studies of the reactivity of these electrons with solution-based oxidants. Optical stopped-flow measurements monitoring the reactions of TiO 2 /e – with substoichiometric oxidants showed a surprising pattern: an initial fast (seconds) decrease in TiO 2 /e – absorbance followed by a secondary, slow (minutes) increase in the broad TiO 2 /e – optical feature. The analysis revealed that the fast decrease is due to the preferential oxidation of the Red/e – trap states and the slow increase results from the re-equilibration of electrons from Blue/e - to Red/e - states. This kinetic model was confirmed by freeze-quench EPR measurements. Quantitative analysis of the kinetic data demonstrated that Red/e – react ~5 times faster than Blue/e – with the nitroxyl radical oxidant 4-methoxy-2,2,6,6-tetramethyl-1-piperidinyloxyl (4-MeO-TEMPO). Similar reactivity patterns were also observed in oxidations of TiO 2 /e – by O 2 , which like 4-MeO-TEMPO is a proton-coupled electron transfer (PCET) oxidant, and by the pure electron transfer (ET) oxidant potassium triiodide (KI 3 ). Furthermore, this suggests that the faster intrinsic reactivity of one trap state over another on the seconds–minutes time scale is likely a general feature of reduced TiO 2 reactivity. This differential trap-state reactivity is likely to influence the performance of TiO 2 in photochemical/electrochemical devices, and it suggests an opportunity for tuning catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Light Induced Processes in CsPbBr 3 –Au Hybrid Nanocrystals: Electron Transfer and Expulsion of Au

Semiconductor–metal heterostructures such as CsPbBr 3 –Au are useful in photocatalysis. When Au nanoparticles are deposited on the CsPbBr 3 nanocrystal surface, they efficiently quench the photoluminescence of the semiconductor. This process has been studied by femtosecond transient absorption spectroscopy measurements, which indicate that electron transfer to the Au nanoparticles occurs from both hot and relaxed electrons in the conduction band of CsPbBr 3 . The electron transfer rate constant is much larger for the hot electrons compared to the relaxed electrons. Under steady state photoirradiation of CsPbBr 3 –Au heterostructure, the photogenerated electrons from the excited CsPbBr 3 nanocrystals continue to charge the Au nanoparticles. After sufficient irradiation, the gold nanoparticles dissociate from the CsPbBr 3 surface and aggregate into larger size gold nanoparticles. The expulsion of gold nanoparticles restores the original luminescence behavior of CsPbBr 3 nanocrystals. The spectroscopic and morphological studies provide insight into the expulsion of gold nanoparticles in photoirradiated CsPbBr 3 –Au heterostructures.

14 SOLAR ENERGY↗
DOE OSTI2021

Role of a 3D Structure in Energy Transfer in Mixed-Ligand Metal–Organic Frameworks

We present a detailed investigation of the photophysical properties of mixed-ligand pyrene- and porphyrin-based metal–organic frameworks (MOFs) as a function of their 3D structure. Solvothermal reactions between metal salts (InCl 3 , Zr(acac) 4 , and ZrCl 4 ) and suitable ratios of 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy) and meso-tetrakis- (4-carboxyphenyl)porphyrin (TCPP) were performed to prepare a series of mixed-ligand ROD-7, NU-901, and NU-1000 MOFs. Time-resolved and steady-state fluorescence measurements were conducted on the mixed-ligand MOFs to study their photophysics. Based on the results, we concluded that upon excitation of TBAPy linkers in the MOFs, singlet excitation energy migrates across TBAPy linkers until it finds a TCPP unit. TCPP acts as an energy trap and quenches the excitation. The efficiency of TBAPy-to-TBAPy energy transfer was found to be sensitive to the structural parameters of MOFs. Analysis of steady-state and time-resolved fluorescence data revealed that excitation energy transfer (EET) is most efficient in ROD-7, followed by NU-901 and NU-1000. We propose that topology that invokes the shorter interchromophoric distances between TBAPy linkers in ROD-7 is responsible for its higher EET efficiency. The distance dependence of the EET rate constant (kEET) was investigated to gain insight into the mechanistic aspects of energy transfer in MOFs. This study revealed that (a) energy transfer in MOFs deviates from the classical Förster model and (b) the geometrical arrangement of linkers influences the mechanism of EET in MOFs. A theoretical investigation was also performed to determine energy-transfer rate constants along different directions and assess the directionality of energy transfer in these MOFs. The magnitude of rate constants indicated that energy transfer in ROD-7 should be highly anisotropic along the stacking direction. Furthermore, these findings suggest that ROD-7 is a promising candidate to play the role of the light-harvesting and energy-transfer component in solar energy conversion devices, where directional energy transfer is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ligand-Structure-Dependent Coherent Vibrational Wavepacket Dynamics in Pyrazolate-Bridged Pt(II) Dimers

Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interrupted DNA and Slow Silver Cluster Luminescence

A DNA–silver cluster conjugate is a hierarchical chromophore with a partly reduced silver core embedded within the DNA nucleobases that are covalently linked by the phosphodiester backbone. Specific sites within a polymeric DNA can be targeted to spectrally tune the silver cluster. Here, the repeated (C 2 A) 6 strand is interrupted with a thymine, and the resulting (C 2 A) 2 -T-(C 2 A) 4 forms only Ag 10 6+ , a chromophore with both prompt (~1 ns) green and sustained (~10 2 μs) red luminescence. Thymine is an inert placeholder that can be removed, and the two fragments (C 2 A) 2 and (C 2 A) 4 also produce the same Ag 10 6+ adduct. In relation to (C 2 A) 2 T(C 2 A) 4 , the (C 2 A) 2 + (C 2 A) 4 pair is distinguished because the red Ag 10 6+ luminescence is ~6× lower, relaxes ~30% faster, and is quenched ~2× faster with O 2 . These differences suggest that a specific break in the phosphodiester backbone can regulate how a contiguous vs broken scaffold wraps and better protects its cluster adduct.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Charge Transfer and Recombination Pathways through Fullerene Guests in Porphyrin-Based MOFs

Porphyrin-based metal–organic frameworks (MOFs) offer a unique platform for building porous donor–acceptor networks that exhibit long-lived charge separation and transport upon incorporation of electron acceptor guest species. Here, in this work, porphyrin-based MOFs, PCN-222(H 2 ) and PCN-222(Zn), synthesized as nanoparticle suspensions, are successfully infiltrated with fullerene acceptor molecules, C 60 or PC 61 BM, in both polar and nonpolar solvent environments. The location and relative binding strength of these guest species are evaluated through a combination of N 2 physisorption measurements, photoluminescence quenching, and UV–vis absorption titration experiments. Semiempirical tight binding calculations are used to screen potential locations of the fullerene guest within the MOF pores, and hybrid density functional theory (DFT)-computed interaction energies confirm the energetically favorable positions. The fundamental photophysics of these donor–acceptor host–guest combinations are probed using ultrafast transient absorption spectroscopy. Sub-picosecond electron transfer involving initial exciplex population is observed, with slow charge recombination lifetimes on the order of τ ~1 ns for all systems in both dimethylformamide and 1,4-dioxane. Charge recombination occurs through population of fullerene and/or framework porphyrin triplet states depending on the porphyrin metalation status. The photophysics of the fullerene-loaded MOFs are discussed in the context of relevant porphyrin–fullerene donor–acceptor molecules to highlight the unique role of the framework environment in dictating photoinduced electron transfer and decay pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Long-Lived Charge-Transfer Excitons in a Graphene–PTCDI–TiOPc Trilayer Heterostructure

Excitation transfer across the interfaces between graphene, perylenetetracarboxylic diimide (PTCDI), and titanyl phthalocyanine (TiOPc) was studied by using transient absorption and photoluminescence spectroscopy. Both photoluminescence quenching and transient absorption measurements confirm the presence of a type-II interface between PTCDI and TiOPc. While the graphene/PTCDI interface is expected to exhibit type-I behavior, transient absorption measurements indicate that only electrons transfer from PTCDI to graphene, with no evidence of hole transfer. Density functional theory calculations reveal significant ground-state electron transfer from graphene to PTCDI, resulting in band bending that prevents excited holes from transferring from PTCDI to graphene. This feature is exploited in a trilayer heterostructure of graphene/PTCDI/TiOPc, where the spatial separation of photoexcited electrons and holes in graphene and TiOPc, respectively, leads to the formation of long-lived photoexcitations with a lifetime of approximately 500 ps. Furthermore, spatially resolved transient absorption measurements reveal the immobile nature of these excitations, confirming that they are charge-transfer excitons rather than free electrons and holes. Furthermore, these results provide valuable insights into the complex interlayer photoexcitation transfer properties and demonstrate precise control over the layer population and the recombination lifetime of photocarriers in such hybrid heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Dial It Down: The Effect of Strongly Interacting Adsorbates on the BiAg 2 Rashba Surface State

Organic semiconductors interfaced with spin–orbit coupled materials offer a rich playground for fundamental studies of controlling spin dynamics in spintronic devices. The adsorbate–surface interactions at such interfaces play a key role in determining the valence electronic and spin structure and consequently, the device physics as well. Here we show that strong adsorbate–surface alloy interaction leads to weakening of the electronic coupling between the surface alloy atoms and quenches the spin–orbit coupled surface state, demonstrated for the case of the strong organic electron acceptor 2,7-dinitropyrene-4,5,9,10-tetrone (NO 2 –PyT, C 16 H 4 N 2 O 8 ) on the Rashba spin–orbit coupled surface alloy BiAg 2 /Ag(111). Furthermore, our findings demonstrate an important challenge associated with using molecular adsorbates to tailor the spin texture in BiAg 2 /Ag(111), and our work provides guidelines to consider while designing interfacial systems to engineer the spin texture in Rashba surface alloys.

36 MATERIALS SCIENCE↗