Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Assessment of Error in Synoptic-Scale Diagnostics Derived from Wind Profiler and Radiosonde Network Data

A topic of current practical interest is the accurate characterization of the synoptic-scale atmospheric state from wind profiler and radiosonde network observations. We have examined several related and commonly applied objective analysis techniques for performing this characterization and considered their associated level of uncertainty both from a theoretical and a practical standpoint. A case study is presented where two wind profiler triangles with nearly identical centroids and no common vertices produced strikingly different results during a 43-h period. We conclude that the uncertainty in objectively analyzed quantities can easily be as large as the expected synoptic-scale signal. In order to quantify the statistical precision of the algorithms, we conducted a realistic observing system simulation experiment using output from a mesoscale model. A simple parameterization for estimating the uncertainty in horizontal gradient quantities in terms of known errors in the objectively analyzed wind components and temperature is developed from these results.

Mace, Gerald G.↗
NASA NTRS1996

Effect of variations in the doping profiles on the properties of doped multiple quantum well avalanche photodiodes

The purpose of this study is to use both theoretical and experimental evidence to determine the impact of doping imbalance and symmetry on the physical and electrical characteristics of doped multiple quantum well avalanche photodiodes (APD). Theoretical models have been developed to calculate the electric field valence and conduction bands, capacitance-voltage (CV), and carrier concentration versus depletion depth profiles. The models showed a strong correlation between the p- and n-doping balance inside the GaAs wells and the number of depleted stages and breakdown voltage of the APD. A periodic doping imbalance in the wells has been shown to result in a gradual increase (or decrease) in the electric field profile throughout the device which gave rise to partially depleted devices at low bias. The MQW APD structures that we modeled consisted of a 1 micron top p(+)-doped (3 x 10(exp 18) cm(exp -3)) GaAs layer followed by a 1 micron region of alternating layers of GaAs (500 A) and Al(0.42)Ga(0.58)As (500 A), and a 1 micron n(+) back layer (3 x 10(exp 18) cm(exp -3)). The GaAs wells were doped with p-i-n layers placed at the center of each well. The simulation results showed that in an APD with nine doped wells, and where the 50 A p-doped layer is off by 10% (p = 1.65 x 10(exp 18) cm(exp -3), n = 1.5 x 10(exp 18) cm(exp -3)), almost half of the MQW stages were shown to be undepleted at low bias which was a result of a reduction in the electric field near the p(+) cap layer by over 50% from its value in the balanced structure. Experimental CV and IV data on similar MBE grown MQW structures have shown very similar depletion and breakdown characteristics. The models have enabled us to better interpret our experimental data and to determine both the extent of the doping imbalances in the devices as well as the overall p- or n-type doping characteristics of the structures.

Menkara, H. M.↗
NASA NTRS1994

An Alternate Method for Estimating Dynamic Height from XBT Profiles Using Empirical Vertical Modes

A technique is presented that applies modal decomposition to estimate dynamic height (0-450 db) from Expendable BathyThermograph (XBT) temperature profiles. Salinity-Temperature-Depth (STD) data are used to establish empirical relationships between vertically integrated temperature profiles and empirical dynamic height modes. These are then applied to XBT data to estimate dynamic height. A standard error of 0.028 dynamic meters is obtained for the waters of the Gulf of Alaska- an ocean region subject to substantial freshwater buoyancy forcing and with a T-S relationship that has considerable scatter. The residual error is a substantial improvement relative to the conventional T-S correlation technique when applied to this region. Systematic errors between estimated and true dynamic height were evaluated. The 20-year-long time series at Ocean Station P (50 deg N, 145 deg W) indicated weak variations in the error interannually, but not seasonally. There were no evident systematic alongshore variations in the error in the ocean boundary current regime near the perimeter of the Alaska gyre. The results prove satisfactory for the purpose of this work, which is to generate dynamic height from XBT data for coanalysis with satellite altimeter data, given that the altimeter height precision is likewise on the order of 2-3 cm. While the technique has not been applied to other ocean regions where the T-S relation has less scatter, it is suggested that it could provide some improvement over previously applied methods, as well.

Lagerloef, Gary S. E.↗
NASA NTRS1996

An Analysis of Gamma-ray Burst Time Profiles from the Burst and Transient Source Experiment

This proposal requested funding to measure the durations of gamma-ray bursts (GRB) in the 4B catalog as well as to study the structure of GRB time profiles returned by the Burst And Transient Source Experiment (BATSE) on board the Compton Gamma-Ray Observatory. The duration (T90) was to be measured using the same techniques and algorithms developed by the principal investigator for the 3B data. The profile structure studies fall into the two categories of variability and fractal analyses.

Lestrade, John Patrick↗
NASA NTRS1996

Ionospheric Profiling using GPS/MET Data

A report on ionospheric profiling using GPS and MET data is presented. A description of the GPS occultation technique, some examples of GPS/MET data products, the data processing system and a preliminary validation of ionospheric profiles is discussed.

Hajj, George↗
NASA NTRS1994

A New Variability Parameter for Gamma-Ray Burst Time Profiles

We present a parameter that measures the structure of gamma-ray burst time profiles. This parameter is based on the statistics of runs and is a good measure of time profile variability. It is shown to be independent of burst duration and less sensitive to burst distance than algorithms that depend directly on the intensity of a burst.

Lestrade, John Patrick↗
NASA NTRS1997

Noise from Supersonic Coaxial Jets: Normal Velocity Profile - Part 2

Instability waves have been established as noise generators in supersonic jets. Recent analysis of these slowly diverging jets has shown that these instability waves radiate noise to the far field when the waves have components with phase velocities that are supersonic relative to the ambient speed of sound. This instability wave noise generation model has been applied to supersonic jets with a single shear layer and is now applied to supersonic coaxial jets with two initial shear layers. In this paper the case of coaxial jets with normal velocity profiles is considered, where the inner jet stream velocity is higher than the outer jet stream velocity. To provide mean flow profiles at all axial locations, a numerical scheme is used to calculate the mean flow properties. Calculations are made for the stability characteristics in the coaxial jet shear layers and the noise radiated from the instability waves for different operating conditions with the same total thrust, mass flow and exit area as a single reference jet. The effects of changes in the velocity ratio, the density ratio and the area ratio are each considered independently.

Dahl, M. D.↗
NASA NTRS1996

Monitoring of Time-Dependent System Profiles by Multiplex Gas Chromatography with Maximum Entropy Demodulation

The maximum entropy technique was successfully applied to the deconvolution of overlapped chromatographic peaks. An algorithm was written in which the chromatogram was represented as a vector of sample concentrations multiplied by a peak shape matrix. Simulation results demonstrated that there is a trade off between the detector noise and peak resolution in the sense that an increase of the noise level reduced the peak separation that could be recovered by the maximum entropy method. Real data originated from a sample storage column was also deconvoluted using maximum entropy. Deconvolution is useful in this type of system because the conservation of time dependent profiles depends on the band spreading processes in the chromatographic column, which might smooth out the finer details in the concentration profile. The method was also applied to the deconvolution of previously interpretted Pioneer Venus chromatograms. It was found in this case that the correct choice of peak shape function was critical to the sensitivity of maximum entropy in the reconstruction of these chromatograms.

Becker, Joseph F.↗
NASA NTRS1998

Data Quality Assessment Methods for the Eastern Range 915 MHz Wind Profiler Network

The Eastern Range installed a network of five 915 MHz Doppler Radar Wind Profilers with Radio Acoustic Sounding Systems in the Cape Canaveral Air Station/Kennedy Space Center area to provide three-dimensional wind speed and direction and virtual temperature estimates in the boundary layer. The Applied Meteorology Unit, staffed by ENSCO, Inc., was tasked by the 45th Weather Squadron, the Spaceflight Meteorology Group, and the National Weather Service in Melbourne, Florida to investigate methods which will help forecasters assess profiler network data quality when developing forecasts and warnings for critical ground, launch and landing operations. Four routines were evaluated in this study: a consensus time period check a precipitation contamination check, a median filter, and the Weber-Wuertz (WW) algorithm. No routine was able to effectively flag suspect data when used by itself. Therefore, the routines were used in different combinations. An evaluation of all possible combinations revealed two that provided the best results. The precipitation contamination and consensus time routines were used in both combinations. The median filter or WW was used as the final routine in the combinations to flag all other suspect data points.

Lambert, Winifred C.↗
NASA NTRS1998

Results from the 1995 Stratospheric Ozone Profile Intercomparison at Mauna Loa (MLO3)

In August 1995 multiple instruments that measure the stratospheric ozone vertical distribution were intercompared at the Mauna Loa Observatory, Hawaii, under the auspices of the Network for the Detection of Stratospheric Change. The instruments included two UV lidar systems, one from JPL and the other from Goddard Space Flight Center, ECC balloon-sondes, a ground-based microwave instrument, Umkehr measurements, and a new ground-based FTIR instrument. The MLS instrument on the UARS satellite provided correlative profiles of ozone, and there was one close overpass of the SAGE II instrument. The results show that much better consistency among instruments is being achieved than even a few years ago, usually to within the instrument uncertainties. The different measurement techniques in this comparison agree to within +/-10% at almost all altitudes, and in the 20 km to 45 km region most agreed within +/-5%. The results show that the current generation of lidars are capable of accurate measurement of the ozone profile to a maximum altitude of 50 km. SAGE agreed well with both lidar and balloon-sonde down to at least 17 km. The ground-based microwave measurement agreed with other measurements from 22 km to above 50 km. One minor source of disagreement continues to be the pressure-altitude conversion needed to compare a measurement of ozone density versus altitude with a measurement of ozone mixing ratio versus pressure.

McPeters, R. D.↗
NASA NTRS1998

Atmos/Atlas 3 Infrared Profile Measurements of Clouds in the Tropical and Subtropical Upper Troposphere

Vertical profiles of infrared cirrus extinction have been derived from tropical and subtropical upper tropospheric solar occultation spectra. The measurements were recorded by the Atmospheric Trace Molecule Spectroscopy (ATMOS) Fourier transform spectrometer during the Atmospheric Laboratory for Applications and Sciences (ATLAS) 3 shuttle flight in November 1994. The presence of large numbers of small ice crystals is inferred from the appearance of broad extinction features in the 8-12 micron region. These features were observed near the tropopause and at lower altitudes. Vertical profiles of the ice extinction (/km) in microwindows at 831, 957, and 1204/cm have been retrieved from the spectra and analyzed with a model for randomly oriented spheroidal ice crystals. An area-equivalent spherical radius of 6 gm is estimated from the smallest ice crystals observed in the 8-12 micron region. Direct penetration of clouds into the lower stratosphere is inferred from observations of cloud extinction extending from the upper troposphere to 50 mbar (20 km altitude). Cloud extinction between 3 and 5 micron shows very little wavelength dependence, at least for the cases observed by the ATMOS instrument in the tropics and subtropics during ATLAS 3.

Rinsland, C. P.↗
NASA NTRS1998

ATMOS/ATLAS 3 Infrared Profile Measurements of Clouds in the Tropical and Subtropical Upper Troposphere

Vertical profiles of infrared cirrus extinction have been derived from tropical and subtropical upper tropospheric solar occultation spectra. The measurements were recorded by the Atmospheric Trace Molecule Spectroscopy (ATMOS) Fourier transform spectrometer during the Atmospheric Laboratory for Applications and Sciences (ATLAS) 3 shuttle flight in November 1994. The presence of large numbers of small ice crystals is inferred from the appearance of broad extinction features in the 8-12 micron region. These features were observed near the tropopause and at lower altitudes. Vertical profiles of the ice extinction (/km) in microwindows at 831, 957, and 1204/cm have been retrieved from the spectra and analyzed with a model for randomly oriented spheroidal ice crystals. An area-equivalent spherical radius of 6 microns is estimated from the smallest ice crystals observed in the 8-12 gm region. Direct penetration of clouds into the lower stratosphere is inferred from observations of cloud extinction extending from the upper troposphere to 50 mbar (20 km altitude). Cloud extinction between 3 and 5 microns shows very little wavelength dependence, at least for the cases observed by the ATMOS instrument in the tropics and subtropics during ATLAS 3.

Rinsland, C. P.↗
NASA NTRS1998

Unprecedentedly Accurate X-Ray Mass Determination for Several Clusters Using Measured Temperature Profiles

We use accurate ASCA gas temperature profiles for nearby clusters A3571, A496, A2199 and some others to derive their mass profiles out to radii of overdensity approximately 500. These are relaxed, moderate cooling flow clusters whose two-dimensional temperature maps do not exhibit any structure that would suggest merging activity. Thus the hydrostatic equilibrium assumption should hold for these clusters and meaningful masses can be derived.

Markevitch, Maxim↗
NASA NTRS1999

Using High Frequency Focused Water-Coupled Ultrasound for 3-D Surface Depression Profiling

Surface topography is an important variable in the performance of many industrial components and is normally measured with diamond-tip profilometry over a small area or using optical scattering methods for larger area measurement. A prior study was performed demonstrating that focused air-coupled ultrasound at 1 MHz was capable of profiling surfaces with 25 micron depth resolution and 400 micron lateral resolution over a 1.4 mm depth range. In this article, the question of whether higher-frequency focused water-coupled ultrasound can improve on these specifications is addressed. 10 and 25 MHz focused ultrasonic transducers were employed in the water-coupled mode. Time-of-flight images of the sample surface were acquired and converted to depth / surface profile images using the simple relation (d = V*t/2) between distance (d), time-of-flight (t), and the velocity of sound in water (V). Results are compared for the two frequencies used and with those from the 1 MHz air-coupled configuration.

Roth, Don J.↗
NASA NTRS1996

1985 Voyager 2 Radio Ranging Measurements of Coronal Density: Asymmetry in the Radial Profiles Explained

An asymmetry in the radial variation of electron density above the cast and west limbs of the Sun was inferred from centimeter wavelength ranging measurements conducted by Voyager 2 during its 1985 solar conjunction. The Voyager 2 ranging measurements, which took place in the heliocentric distance range of 7-40 solar radius, have been compared with the white-light coronagraph measurements of the underlying corona collected by the Mark 3 K-coronameter located at the Mauna Loa Solar Observatory. It is shown that the disparity in radial profiles is not real but is instead caused by longitudinal variations stemming from the probing of significantly different source regions its revealed in the white-light measurements. These results improve our understanding of the probing abilities of ranging measurements and their relationship to white-light measurements. They reinforce the notion that the high-precision and high-sensitivity features of ranging measurements are more fully exploited in the investigation of density variations across the ubiquitous low-contrast raylike structures that permit the corona, rather than in determining radial density profiles.

Woo, Richard↗
NASA NTRS1995

Steady State Temperature Profile in a Cylinder Heated by Microwaves

A new theory has been developed to calculate the steady state temperature profile in a cylindrical sample positioned along the entire axis of a cylindrical microwave cavity. Temperature profiles where computed for- alumina rods of various radii contained in a cavity excite in one of the TM(sub OnO) modes with n = 1, 2 or 3. Calculations where also performed with a concentric outer cylindrical tube surrounding the rod to investigate hybrid heating. The parameters studies of the sample center and surface temperature where performed as a function of the total power transmitted into the cavity. Also, the total hemispherical emissivity was varied at boundaries of the rod, surrounding tube, and cavity walls. The result are discussed in the context of controlling the average rod temperature and the temperature distribution in the rod during microwave processing.

Jackson, H. W.↗
NASA NTRS1999

Validation of Surface Skin Temperature and Moisture Profiles Using Satellite Data

New validation techniques and metrics using satellite data have been developed to evaluate the quality of model-based estimates of surface skin temperature (Tg) and moisture profiles (q). The satellite data consist of clear sky outgoing long-wave radiation (CLR), broadband radiances from 8 to 12 mu (RadWn), brightness temperature centered around 10.8 mu (Tbb), and total precipitable water (TPW) from microwave radiometry. We show that CLR can be used to diagnose Tg. Furthermore, by using a combination of CLR and RadWn from CERES-TRMM measurements and TPW from SSM/I, we are able to identify errors in the moisture profile. Finally, three-hourly Tbb from the International Satellite Cloud Climatology Project can be used to evaluate the amplitude and diurnal variation of Tg. For purpose of illustration, Tg and q are evaluated from runs with an early version of the Goddard Earth Observing System Data Assimilation System (GEOS-2). It is found that, in general, Tg is too cold in the winter hemisphere and q is too wet in the upper atmosphere. In order to address these deficiencies, several improvements have been implemented into GEOS-2, including a Land-Surface-Model, a Moist Turbulence Scheme, and the assimilation of new TOVS retrievals. Preliminary results indicate positive impacts from each of these implementations.

Wu, Man Li C.↗