SEARCH · Engineering Papers

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

DOE OSTI2024

OC6 project Phase IV: validation of numerical models for novel floating offshore wind support structures

Abstract. This paper provides a summary of the work done within Phase IV of the Offshore Code Comparison Collaboration, Continued with Correlation and unCertainty (OC6) project, under International Energy Agency Wind Technology Collaboration Programme Task 30. This phase focused on validating the loading on and motion of a novel floating offshore wind system. Numerical models of a 3.6 MW horizontal-axis wind turbine atop the TetraSpar floating support structure were compared using measurement data from a 1:43-Froude-scale test performed in the University of Maine's Alfond Wind–Wave (W2) Ocean Engineering Laboratory. Participants in the project ran a series of simulations, including system equilibrium, surge offsets, free-decay tests, wind-only conditions, wave-only conditions, and a combination of wind and wave conditions. Validation of the models was performed by comparing the aerodynamic loading, floating support structure motion, tower base loading, mooring line tensions, and keel line tensions. The results show a relatively good estimation of the aerodynamic loading and a reasonable estimation of the platform motion and tower base fore–aft bending moment. However, there is a significant dispersion in the dynamic loading for the upwind mooring line. Very good agreement was observed between most of the numerical models and the experiment for the keel line tensions.

17 WIND ENERGY↗

DOE OSTI2026

Thermodynamics of Tritium Trapping by Point Defects at Interfacial Cr-based Phases of the Al Coating

Density functional theory (DFT) simulations have been carried out to evaluate the potential for tritium trapping by metal vacancies in four phases Cr-containing phases (i.e., Cr3Si, Al0.3Cr0.7, Al8Cr5-HT, and Al8Cr5) identified near the interface between the Al coating and 316 stainless steel (316 SS) cladding. In addition, an ab initio thermodynamics approach has been employed to predict the temperature and T2-partial pressure dependence on the thermodynamics of singly tritiated defects. Key results in this work suggest that metal vacancies in the four phases have the potential to favorably trap tritium species, especially Si vacancies in Cr3Si phase. This overall thermodynamic trend can be correlated to the energy cost of having an interstitial tritium in the lattice, which has been calculated to range from 0.17 eV in Al8Cr5-HT to 0.89 eV in Cr3Si. A comparison of the results from this study with previous theoretical works investigating tritium behavior in other Fe-Al phases identified in the aluminide coating, suggests that metal vacancies are generally able to trap tritium in various Fe-Al aluminide phases. Especially, it was found that Si and Al vacancies would be the most efficient to trap for tritium, followed by Cr vacancies, then Fe and Ni vacancies. In the four Cr-based material phases investigated in this work, it is interesting to note that, in the absences of Fe or Ni species, strong interactions between tritium and the metal vacancies are always occurring by the formation of preferential Cr—T bonds (i.e., no Si—T or Al—T bonds were formed).

Sassi, Michel J.↗

NASA NTRS1985

Application of a computable model of human spatial vision to phase discrimination

A computable model of human spatial vision is used to make predictions for phase-discrimination experiments. This model is being developed to deal with a broad range of problems in vision and was not specifically formulated to deal with phase discrimination. In the model, cross-correlation of the stimuli with an array of sensors produces feature vectors that are operated on by a position-uncertain ideal observer to simulate detection and discrimination experiments. In this report, the stimuli are compound sinusoidal gratings composed of a fundamental and a higher-frequency component added in various phases. Model predictions are compared with three key results from the literature: (1) the effect of the contrast of the fundamental on phase discrimination, (2) threshold phase difference as a function of the fundamental frequency, and (3) the contrast required for phase discrimination as a function of the frequency ratio of the two grating components. In the first two cases, the predictions capture the main features of the data, although quantitative discrepancies remain. In the third case, the model fails, and this failure suggests additional restrictions on the combination of information across sensors.

Nielsen, K. R. K.↗

NASA NTRS2007

Coadding Techniques for Image-based Wavefront Sensing for Segmented-mirror Telescopes

Image-based wavefront sensing algorithms are being used to characterize optical performance for a variety of current and planned astronomical telescopes. Phase retrieval recovers the optical wavefront that correlates to a series of diversity-defocused point-spread functions (PSFs), where multiple frames can be acquired at each defocus setting. Multiple frames of data can be coadded in different ways; two extremes are in "image-plane space," to average the frames for each defocused PSF and use phase retrieval once on the averaged images, or in "pupil-plane space," to use phase retrieval on every set of PSFs individually and average the resulting wavefronts. The choice of coadd methodology is particularly noteworthy for segmented-mirror telescopes that are subject to noise that causes uncorrelated motions between groups of segments. Using data collected on and simulations of the James Webb Space Telescope Testbed Telescope (TBT) commissioned at Ball Aerospace, we show how different sources of noise (uncorrelated segment jitter, turbulence, and common-mode noise) and different parts of the optical wavefront, segment and global aberrations, contribute to choosing the coadd method. Of particular interest, segment piston is more accurately recovered in "image-plane space" coadding, while segment tip/tilt is recovered in "pupil-plane space" coadding.

Smith, Scott↗

DOE OSTI2024

Inter-ELM pedestal turbulence dynamics dependence on q 95 and temperature gradient

A series of dedicated experiments from DIII-D tokamak provide spatially and temporally resolved measurements of electron density and temperature, and multiscale and multichannel fluctuations over a wide range of conditions. Measurements of long wavelength density fluctuations in the type-I ELMing H-mode pedestal routinely revealed a coexistence of multiple instabilities that exhibit dramatic different dynamic behaviors as q 95 and temperature gradient are varied, apparently responsible for limiting pedestal temperature profiles. Two distinct frequency bands of density fluctuations are modulated with ELM cycle with frequency above 200kHz propagating in the electron diamagnetic direction in the lab frame (electron mode) and below 200kHz propagating in the ion diamagnetic direction (ion mode). The electron mode amplitude peaks near the electron temperature gradient region and increases with q 95 which seems to be correlated with the increased χ e at higher q 95 , similar to the characteristics expected for Micro-tearing Mode (MTM). At higher q 95 , during the inter-ELM period, the ion mode decays at later phase of the ELM cycle. Consistently, the poloidal correlation length of the ion mode is also found to reduce which suggests the possible E×B flow shear suppression of ion mode at later phase of the ELM cycle as the Er well recovers. In contrast, the electron mode grows during the ELM cycle and reaches saturation at around 50-60% of ELM period. Linear gyrokinetic simulations find the MTMs as the most unstable mode in the pedestal electron temperature gradient region. The higher q 95 and lower magnetic shear destabilize MTMs. These observations provide key insights of the underlying physics of multifield properties and rich dataset of experimental 'fingerprints' that enable new tests of the theoretical pedestal models and lead to developing a predictive model for pedestal formation on ITER and future burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Calculating n-point charge correlations in evolving systems

Background: In dynamic systems such as heavy-ion collisions, charge susceptibilities and local charge correlations change with time. These changes are accompanied by nonlocal correlations, which spread diffusively with time and are constrained by local charge conservation. Such correlations have been measured at the Relativistic Heavy-Ion Collider (RHIC) and have been linked to the chemical evolution of the matter and possible phase separation or critical phenomena. The evolution of such correlations has been modeled for two-point correlators superimposed onto hydrodynamics, but not for three- or four-point correlators. These higher-order correlators represent an essential basis for calculating the kurtosis and skewness of charge distributions measured at RHIC. For short-range correlations, such as those between charges on the same particle, and the associated charge-balance correlations a theoretical formalism was lacking for handling higher-order correlations. In particular, one needed to understand how higher-order charge fluctuations was split onto lower numbers of particles. For example, correlations of order three have contributions with charge all on one particle, split onto two particle, or split onto three. By assuming local chemical equilibrium of short-range correlations, the sources of the various correlators were found to be uniquely determined. The relevant theoretical foundation is presented here, including a diagrammatic technique to correctly account for all the possible terms to higher-order correlations. Here, we found a consistent theoretical treatment and its applicability, viability, and tractability are discussed. The formalism derived here enables realistic and quantitative modeling of the three- and four-point charge correlations necessary for understanding measurements of the kurtosis and skewness of charge distributions at RHIC. These observables have been promoted as signals of phase transitions or measures of chemical evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS2006

SOFTC: A Software Correlator for VLBI

SOFTC is an advanced software implementation of a signal correlator for very-long-baseline interferometry (VLBI) for measuring positions of natural celestial objects and distant spacecraft. Because of increases in processing speeds of general-purpose computers, software VLBI correlators have become viable alternatives to hardware ones. The input to SOFTC consists of digitized samples of raw VLBI-antenna received- signal voltages. Optionally, SOFTC also tracks calibration tones superimposed on the received signals. The outputs of SOFTC are (1) phases and amplitudes as functions of time and frequency for cross-correlated received signals and (2) phases and amplitudes as functions of time, station, and tone number for the calibration tones. SOFTC was created to be as accurate as possible, capable of processing essentially any VLBI data, pass strong debugging tests, have a simple user interface, and have no platform dependencies. SOFTC is written modularly in the C programming language. The great advantage of implementing a correlator in software, in contradistinction to hardware, is that it becomes relatively easy and much less expensive and time-consuming to adapt, modify, improve, and update the correlator.

Lowe, Stephen↗

DOE OSTI2025

In-Situ Process Monitoring Evaluation and Demonstration using Advanced Characterization with Laser Powder Bed Systems

Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) worked with EOS Group to evaluate the current in-situ sensor capabilities of an EOS M290 Laser Powder Bed Fusion machine. The M290 was fitted with a 1 Mega-Pixel (MP) grayscale visible-light camera and a 5 MP temporally integrated (TI) near-infrared (NIR) camera. One print from stainless steel (SS) 316 and two from Inconel 625 (IN625) were performed where data including in-situ imaging and a machine log file were captured. These data were subsequently analyzed using a Dynamic Multi-Scale Segmentation Convolutional Neural Network (DMSCNN) trained on user defined classes and correlated to as-printed flaws, in the form of porosity, discovered in X-Ray Computed Tomography (XCT). In Phase I, two indications were detected in-situ and spatially correlated to stochastic lack-of-fusion flaws discovered using XCT. In Phase II, using these links from in-situ signatures to XCT flaw populations, a second neural network (NN) was trained to create a Voxelized Property Prediction Model (VPPM) to predict porosity percentages within the part using only features garnered from the in-situ data from two IN625 complex geometries. The VPPM was able to accurately predict porosity values for IN625 parts with an R 2 value of 0.764.

36 MATERIALS SCIENCE↗

DOE OSTI2025

In-Situ Process Monitoring Evaluation and Demonstration using Advanced Characterization with Laser Powder Bed Systems

36 MATERIALS SCIENCE↗

DOE OSTI2022

Holographic solar systems and hydrogen atoms: non-relativistic physics in AdS and its CFT dual

We study a non-relativistic limit of physics in AdS which retains the curvature through a harmonic Newtonian potential. This limit appears in a CFT dual through the spectrum of operators of large dimension and correlation functions of those operators with appropriate kinematics. In an additional flat spacetime limit, the spectrum is determined by scattering phase shifts (proportional to anomalous dimensions), and a CFT correlation function is proportional to the S-matrix. In particular, we describe the effect of resonances on the spectrum and correlation functions. As an example, we discuss the Coulomb potential (describing solar systems and hydrogen atoms in AdS) in detail.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Introducing the embedded random phase approximation: H 2 dissociative adsorption on Cu(111) as an exemplar

The random phase approximation (RPA) as a means of treating electron correlation recently has been shown to outperform standard density functional theory (DFT) approximations in a variety of cases. However, the computational cost of the RPA is substantially more than DFT, especially when aiming to study extended surfaces. Properly accounting for sufficient surface ensemble size, Brillouin zone sampling, and vacuum separation of periodic images in standard periodic-planewave-based DFT code raises the cost to achieve converged results. Here, we show that sub-system embedding schemes enable use of the RPA for modeling heterogeneous reactions at reduced computational cost. Further, we explore two different embedded RPA (emb-RPA) approaches, periodic emb-RPA and cluster emb-RPA. We use the (experimentally and theoretically) well-studied H 2 dissociative adsorption on Cu(111) as our exemplar, and first perform full periodic RPA calculations as a benchmark. The full RPA results match well the semi-empirical barrier fit to experimental observables and others derived from high-level computations, e.g., from recent embedded n-electron valence second order perturbation theory [Zhao et al., J. Chem. Theory Comput. 16(11), 7078–7088 (2020)] and quantum Monte Carlo [Doblhoff-Dier et al., J. Chem. Theory Comput. 13(7), 3208–3219 (2017)] simulations. Among the two emb-RPA approaches tested, the cluster emb-RPA accurately reproduces the energy profile (maximum error of 50 meV along the reaction pathway) while reducing the computational cost by approximately two orders of magnitude. We therefore expect that the embedded cluster approach will enable wider RPA implementation in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1991

A spectroscopic search for colliding stellar winds in O-type close binary systems. I - AO Cassiopeiae

AO Cas, a short-period, double-lined spectroscopic binary, is studied as part of a search for spectroscopic evidence of colliding stellar winds in binary systems of O-type stars. High S/N ratio spectra of the H-alpha and He I 6678-A line profiles are presented, and their orbital-phase-related variations are examined in order to derive the location and motions of high-density circumstellar gas in the system. These profile variations are compared with those observed in the UV stellar wind lines in IUE archival spectra. IUE spectra are also used to derive a system mass ratio by constructing cross-correlation functions of a single-lined phase spectrum with each of the other spectra. The resulting mass ratio is consistent with the rotational line broadening of the primary star, if the primary is rotating synchronously with the binary system. The best-fit models were found to have an inclination of 61.1 deg + or - 3.0 deg and have a primary which is close to filling its critical Roche lobe.

Gies, Douglas R.↗

DOE OSTI2023

Simulations with machine learning potentials identify the ion conduction mechanism mediating non-Arrhenius behavior in LGPS

Abstract Li 10 Ge(PS 6 ) 2 (LGPS) is a highly concentrated solid electrolyte, in which Coulombic repulsion between neighboring cations is hypothesized as the underlying reason for concerted ion hopping, a mechanism common among superionic conductors such as Li 7 La 3 Zr 2 O 12 (LLZO) and Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP). While first principles simulations using molecular dynamics (MD) provide insight into the Li + transport mechanism, historically, there has been a gap in the temperature ranges studied in simulations and experiments. Here, we used a neural network potential trained on density functional theory (DFT) simulations, to run up to 40-nanosecond long MD simulations at DFT-like accuracy to characterize the ion conduction mechanisms across a range of temperatures that includes previous simulations and experimental studies. We have confirmed a Li + sublattice phase transition in LGPS around 400 K, below which the ab -plane diffusivity D a b ∗ is drastically reduced. Concomitant with the sublattice phase transition near 400 K, there is less cation-cation (cross) correlation, as characterized by Haven ratios closer to 1, and the vibrations in the system are more harmonic at lower temperature. Intuitively, at high temperature, the collection of vibrational modes may be sufficient to drive concerted ion hops. However, near room temperature, the vibrational modes available may be insufficient to overcome electrostatic repulsion, thus resulting in less correlated ion motion and comparatively slower ion conduction. Such phenomena of a sublattice phase transition, below which concerted hopping plays a less significant role, may be extended to other highly concentrated solid electrolytes such as LLZO and LATP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2013

Observations of Global and Regional Ionospheric Irregularities and Scintillation Using GNSS Tracking Networks

The rate of TEC index (ROTI) is a measurement that characterizes ionospheric irregularities. It can be obtained from standard GNSS dual-frequency phase data collected using a geodetic type of GNSS receiver. By processing GPS data from ground-based networks of International GNSS Service and Continuously Operating Reference Station (CORS), ROTI maps have been produced to observe global and regional scintillation activities. A major mid-latitude scintillation event in the contiguous United States is reported here that was captured in ROTI maps produced using CORS GPS data collected during a space weather storm. The analyses conducted in this work and previously by another group indicate that ROTI is a good occurrence indicator of both amplitude and phase scintillations of GPS L-band signals, even though the magnitudes of ROTI, S4, and sigma(sub phi) can be different. For example, our analysis indicates that prominent ROTI and the L1 phase scintillation (sigma(sub phi)) are well correlated temporally in the polar region while L1 amplitude scintillation rarely occurs. The differences are partially attributed to physics processes in different latitude regions, such as high-speed plasma convection in the polar region that can suppress the amplitude scintillation. An analysis of the impact of ionospheric scintillation on precise positioning, which requires use of dual-frequency phase data, is also conducted. The results indicate that significant (more than an order of magnitude) positioning errors can occur under phase scintillation conditions.

ionospheric measurements↗

DOE OSTI2025

Nanoscale modulation of flat bands via controllable charge density wave defects in 4⁢𝐻⁡𝑏−Ta⁢S 2

Electron correlation is a main driver of exotic quantum phases and their interplay. The 4H b-TaS 2 system, possessing an intrinsic heterostructure of 1T- and 1H -TaS 2 monolayers, offers a unique opportunity to control electron correlation by distorting the atomic lattice or tuning interlayer coupling. Here, we investigated intrinsically deformed charge-density waves (CDWs) in the 1T layer of 4H b-TaS 2 to elucidate and control their effects on flat bands using scanning tunneling microscopy and spectroscopy (STM/S) combined with first-principles calculations. We identified two types of CDW defects: Type 1 has structural distortion and locally suppressed flat bands, while Type 2 features an increased flat band filling factor of intact CDW structure. Density functional theory calculations indicate that a sulfur vacancy in the 1T layer distorts the CDW structure and gives rise to a Type 1, whereas a sulfur vacancy in the 1H layer reduces the interlayer charge transfer and leads to a Type 2. Furthermore, we demonstrated creating and erasing individual CDW defects via STM manipulation. Here, our findings provide a pathway to not only tune flat bands but also selectively manipulate the interaction between CDW, the atomic lattice, and interlayer coupling in strongly correlated systems with atomic precision.

Charge density waves↗

DOE OSTI2023

OC6 project Phase III: validation of the aerodynamic loading on a wind turbine rotor undergoing large motion caused by a floating support structure

Abstract. This paper provides a summary of the work done within Phase III of the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) project, under the International Energy Agency Wind Technology Collaboration Programme Task 30. This phase focused on validating the aerodynamic loading on a wind turbine rotor undergoing large motion caused by a floating support structure. Numerical models of the Technical University of Denmark 10 MW reference wind turbine were validated using measurement data from a 1:75 scale test performed during the UNsteady Aerodynamics for FLOating Wind (UNAFLOW) project and a follow-on experimental campaign, both performed at the Politecnico di Milano wind tunnel. Validation of the models was performed by comparing the loads for steady (fixed platform) and unsteady (harmonic motion of the platform) wind conditions. For the unsteady wind conditions, the platform was forced to oscillate in the surge and pitch directions under several frequencies and amplitudes. These oscillations result in a wind variation that impacts the rotor loads (e.g., thrust and torque). For the conditions studied in these tests, the system aerodynamic response was almost steady. Only a small hysteresis in airfoil performance undergoing angle of attack variations in attached flow was observed. During the experiments, the rotor speed and blade pitch angle were held constant. However, in real wind turbine operating conditions, the surge and pitch variations would result in rotor speed variations and/or blade pitch actuations, depending on the wind turbine controller region that the system is operating. Additional simulations with these control parameters were conducted to verify the fidelity of different models. Participant results showed, in general, a good agreement with the experimental measurements and the need to account for dynamic inflow when there are changes in the flow conditions due to the rotor speed variations or blade pitch actuations in response to surge and pitch motion. Numerical models not accounting for dynamic inflow effects predicted rotor loads that were 9 % lower in amplitude during rotor speed variations and 18 % higher in amplitude during blade pitch actuations.

17 WIND ENERGY↗

DOE OSTI2023

Quantum Phase Diagram and Spontaneously Emergent Topological Chiral Superconductivity in Doped Triangular-Lattice Mott Insulators

The topological superconducting state is a highly sought-after quantum state hosting topological order and Majorana excitations. Here, in this Letter, we explore the mechanism to realize the topological superconductivity (TSC) in the doped Mott insulators with time-reversal symmetry (TRS). Through large-scale density matrix renormalization group study of an extended triangular-lattice t–J model on the six- and eight-leg cylinders, we identify a d + id-wave chiral TSC with spontaneous TRS breaking, which is characterized by a Chern number C=2 and quasi-long-range superconducting order. We map out the quantum phase diagram with by tuning the next-nearest-neighbor (NNN) electron hopping and spin interaction. In the weaker NNN-coupling regime, we identify a pseudogaplike phase with a charge stripe order coexisting with fluctuating superconductivity, which can be tuned into d -wave superconductivity by increasing the doping level and system width. The TSC emerges in the intermediate-coupling regime, which has a transition to a d-wave superconducting phase with larger NNN couplings. The emergence of the TSC is driven by geometrical frustrations and hole dynamics which suppress spin correlation and charge order, leading to a topological quantum phase transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Noise robust detection of quantum phase transitions

Quantum computing allows for the manipulation of highly correlated states whose properties quickly go beyond the capacity of any classical method to calculate. Thus one natural problem which could lend itself to quantum advantage is the study of ground-states of condensed matter models, and the transitions between them. However, current levels of hardware noise can require extensive application of error-mitigation techniques to achieve reliable computations. In this work, we use several IBM devices to explore a finite-size spin model with multiple “phaselike” regions characterized by distinct ground-state configurations. Using preoptimized Variational Quantum Eigensolver (VQE) solutions, we demonstrate that in contrast to calculating the energy, where zero-noise extrapolation is required in order to obtain qualitatively accurate yet still unreliable results, calculations of the energy derivative, two-site spin correlation functions, and the fidelity susceptibility yield accurate behavior across multiple regions, even with minimal or no application of error-mitigation approaches. Taken together, these sets of observables could be used to identify level crossings in a simple, noise-robust manner which is agnostic to the method of ground state preparation. This work shows promising potential for near-term application to identifying quantum phase transitions, including avoided crossings and nonadiabatic conical intersections in electronic structure calculations. Published by the American Physical Society 2024

Lively, Kevin (ORCID:0000000320981494)↗