Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Photochemistry of Triton's Atmosphere and Ionosphere

The photochemistry of 32 neutral and 21 ion species in Triton's atmosphere is considered. Parent species N2, CH4, and CO (with a mixing ratio of 3 x 10(exp -4) in our basic model) sublime from the ice with rates of 40, 208, and 0.3 g/sq cm/b.y., respectively. Chemistry below 50 km is driven mostly by photolysis of methane by the solar and interstellar medium Lyman-alpha photons, producing hydrocarbons C2H4, C2H6, and C2H2 which form haze particles with precipitation rates of 135, 28, and 1.3 g/sq cm/b.y., respectively. Some processes are discussed which increase the production of HCN (by an order of magnitude to a value of 29 g/sq cm/b.y.) and involve indirect photolysis of N2 by neutrals. Reanalysis of the measured methane profiles gives an eddy diffusion coefficient K = 4 x 10(exp 3)sq cm/s above the tropopause and a more accurate methane number density near the surface, (3.1 +/- 0.8)x IO(exp 11)/cu cm. Chemistry above 200 km is driven by the solar EUV radiation (lambda less than 1000 A) and by precipitation of magnetospheric electrons with a total energy input of 10(exp 8) W (based on thermal balance calculations). The most abundant photochemical species are N, H2, H, 0, and C. They escape with the total rates of 7.7 x 10(exp 24)/ s, 4.5 x 10(exp 25)/s, 2.4 x 10(exp 25)/s, 4.4 x 10(exp 22)/s, and 1.1 x 10(exp 24), respectively. Atomic species are transported to a region of 50-200 km and drive the chemistry there. Ionospheric chemistry explains the formation of an E region at 150-240 km with HCO(+) as a major ion, and of an F region above 240 km with a peak at 320 km and C(+) as a major ion. The ionosphere above 500 km consists of almost equal densities of C(+) and N(+) ions. The model profiles agree with the measured atomic nitrogen and electron density profiles. A number of other models with varying rate coefficients of some reactions, differing properties of the haze particles (chemically passive or active), etc., were developed. These models show that there are four basic unknown values which have strong impacts on the composition and structure of the atmosphere and ionosphere. These values and their plausible ranges are the CO mixing ratio f(sub co) = 10(exp -4) - 10(exp -3), the magnetospheric electron energy input (1 +/- 0.5) x 10(exp 8) W, the rate coefficient of charge-exchange reaction N2(+) + C(kappa) = 10(exp -11) - 10(exp -10)cu cm/s, and the ion escape velocity upsilon(sub i) approx. equals 150 cm/s.

Krasnopolsky, Vladimir A.↗
NASA NTRS1995

Photochemistry of Triton's Atmosphere and Ionosphere

The photochemistry of 32 neutral and 21 ion species in Triton's atmosphere is considered. Parent species N2, CH4, and CO (with a mixing ratio of 3 x 10(exp -4) in our basic model) sublime from the ice with rates of 40, 208, and 0.3 g/sq cm/b.y., respectively. Chemistry below 50 km is driven mostly by photolysis of methane by the solar and interstellar medium Lyman-alpha photons, producing hydrocarbons C2H4, C2H6, and C2H2 which form haze particles with precipitation rates of 135, 28, and 1.3 g/sq cm/b.y., respectively. Some processes are discussed which increase the production of HCN (by an order of magnitude to a value of 29 g/sq cm/b.y.) and involve indirect photolysis of N2 by neutrals. Reanalysis of the measured methane profiles gives an eddy diffusion coefficient K = 4 x 10(exp 3) sq cm/s above the tropopause and a more accurate methane number density near the surface, (3.1 +/- 0.8) x 10(exp 11)/cc cm. Chemistry above 200 km is driven by the solar EUV radiation (lambda less than 1000 A)) and by precipitation of magnetospheric electrons with a total energy input of 10(exp 8) W (based on thermal balance calculations). The most abundant photochemical species are N, H2, H, O, and C. They escape with the total rates of 7.7 x 10(exp 24)/ s, 4.5 x 10(exp 25)/ s, 2.4 x 10(exp 25)/ s, 4.4 x 10(exp 22)/ s, and 1.1 x 10(exp 24)/ s, respectively. Atomic species are transported to a region of 50-200 km and drive the chemistry there. Iono- spheric chemistry explains the formation of an E region at 150-240 km with HCO(+) as a major ion, and of an F region above 240 km with a peak at 320 km and C(+) as a major ion. The ionosphere above 500 km consists of almost equal densities of C(+) and N(+) ions. The model profiles agree with the measured atomic nitrogen and electron density profiles. A number of other models with varying rate coefficients of some reactions, differing properties of the haze particles (chemically passive or active), etc., were developed. These models show that there are four basic unknown values which have strong impacts on the composition and structure of the atmosphere and ionosphere. These values and their plausible ranges are the CO mixing ratio f(sub co) = 10(exp -4)- 10(exp -3), the magnetospheric electron energy input (1 +/- 0.5) x 10(exp 8) W, the rate coefficient of charge-exchange reaction N2(+) + Ck = 10(exp -11)-10(exp -10)cc cm/s, and the ion escape velocity upselon(sub i) approx. 150 cm/s.

Krasnopolsky, Vladimir A.↗
DOE OSTI2020

Why Are There so Few Reports of High-Energy Electron Drift Resonances? Role of Radial Phase Space Density Gradients

Models of monochromatic Pc5 (2–7 mHz) ultralow frequency (ULF) wave interactions with high energy (greater than ~1 MeV) electrons predict drift resonant interactions that can cause rapid radial transport and acceleration. There are few reports of electron drift resonance at energies greater than ~1 MeV, in contrast to lower energies; moreover, all previous reports occur in the aftermath of interplanetary shocks. These two facts are difficult to reconcile with theory and numerical simulations predicting that greater than ~1 MeV drift resonances should occur more often and in a wider variety of driving conditions. In this study, we show that a combination of observational sampling biases and nominal radial phase space density gradients is one explanation for this discrepancy between theory and observations. In particular, we examine electron dynamics in two case studies with very similar satellite coverage, solar wind conditions, and Pc5 wave properties, yet with different radial phase space density profiles. Using global wave and particle observations, we show that the events have vastly different particle responses despite having similar wave properties. Placing these results in context with past studies, we further show here that nominal radial PSD gradients near geostationary orbit can mask the expected drift resonance particle response and explain (1) the small number of past greater than ~1 MeV drift resonance reports and (2) the restriction of these reports to interplanetary shock events. We argue that future observational studies characterizing radial transport via drift resonance should examine global particle dynamics, including observations of the radial phase space density profile.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2019

A Large Source of Cloud Condensation Nuclei from New Particle Formation in the Tropics

Cloud condensation nuclei (CCN) can affect cloud properties and therefore the Earth’s radiative balance. New particle formation (NPF) from condensable vapours in the free troposphere has been suggested to contribute to CCN, especially in remote, pristine atmospheric regions, but direct evidence is sparse, and the magnitude of this contribution is uncertain. Here we use in-situ aircraft measurements of vertical profiles of aerosol size distributions to present a global-scale survey of NPF occurrence. We observed intense NPF occurring at high altitude in tropical convective regions over both the Pacific and Atlantic Oceans. Together with the results of chemical-transport models, our findings indicate that NPF persists at all longitudes as a global-scale band in the tropical upper troposphere, covering about 40% of the Earth’s surface. Furthermore, we find that this NPF in the tropical upper troposphere is a globally important source of CCN in the lower troposphere, where they can affect cloud properties. Our findings suggest that the production of CCN, as these new particles descend towards the surface, is currently not adequately captured in global models, because they tend to underestimate both the magnitude of tropical upper tropospheric NPF and the subsequent growth to CCN sizes. This has potential implications for cloud albedo and the global radiative balance.

Atmospheric chemistry↗
NASA NTRSDate not supplied

Impact of Air Traffic Reductions during the COVID-19 Pandemic on Aircraft-induced Clouds and their Radiative Effects

Air travel restrictions due to the novel coronavirus 2019 (COVID-19) pandemic drastically reduced air travel internationally during the spring of 2020. Such an extraordinary disruption of air traffic may have a profound effect on contrail formation that could allow for better quantification and scientific understanding of the radiative impacts of aviation-induced clouds on climate. This investigation synergizes MODIS, CrIS, and GOES-16 satellite analyses with weather analyses, including those from GEOS and MERRA, to compare contrail formation conditions and radiative forcings of linear contrails and thin cirrus detected over the contiguous United States (CONUS) and the North Atlantic for the 2020 air traffic slowdown period with parallel analyses conducted for a baseline period from a previous year with normal air traffic. A consistent analysis system for contrail detection and cloud property retrievals (e.g. optical depth, particle size, and altitude) from satellites, coupled with radiative transfer modeling are applied to characterize and contrast contrail cirrus properties and radiative effects estimated during the pandemic and baseline periods. Temperature and humidity profiles from numerical weather models and hyperspectral infrared measurements are used to estimate the contrail formation potential (CFP) over the study areas in order to help choose the most appropriate baseline period and to account for potential impacts of differences in meteorology on contrail formation and coverage. This study, using NASA satellite data and other assets, is expected to improve our understanding of the relationship between air traffic, contrail cirrus coverage and related impacts in order to better quantify the need for contrail formation mitigation strategies that could reduce aviation effects on climate.

William L Smith↗
DOE OSTI2020

Thermomechanical Analysis of Polysulfone-Nanodiamond Mixed Matrix Membranes

Idaho National Laboratory is developing a polymer membrane designed to concentrate oxygen from air to assist in cleaner coal combustion and other gasification processes. These membranes were formed by adding nanodiamond particles to enhance their transport properties. This study focuses on the thermomechanical analysis (TMA) of these membranes to probe the behavior between the nanodiamond particles and the polymer.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Simulated Dust Transport in the Convective Boundary Layer

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth's radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud–relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large–eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large–eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART–WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi–single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. Furthermore, these results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Dataset for "FLEXPART-WRF simulations to assess dust transport in the convective boundary layer at the Southern Great Plains site"

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth’s radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud-relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large-eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large-eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART-WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi-single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. These results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The importance of Aitken mode aerosol particles for cloud sustenance in the summertime high Arctic – a simulation study supported by observational data

The potential importance of Aitken mode particles (diameters ~ 25–80 nm) for stratiform mixed-phase clouds in the summertime high Arctic (>80° N) has been investigated using two large-eddy simulation models. We find that, in both models, Aitken mode particles significantly affect the simulated microphysical and radiative properties of the cloud and can help sustain the cloud when accumulation mode concentrations are low (< 10–20 cm –3 ), even when the particles have low hygroscopicity (hygroscopicity parameter – κ=0.1). However, the influence of the Aitken mode decreases if the overall liquid water content of the cloud is low, either due to a higher ice fraction or due to low radiative cooling rates. An analysis of the simulated supersaturation (ss) statistics shows that the ss frequently reaches 0.5 % and sometimes even exceeds 1 %, which confirms that Aitken mode particles can be activated. The modelling results are in qualitative agreement with observations of the Hoppel minimum obtained from four different expeditions in the high Arctic. Our findings highlight the importance of better understanding Aitken mode particle formation, chemical properties and emissions, particularly in clean environments such as the high Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

First Principles Simulations of Electrified Interfaces in Electrochemistry

This chapter discusses some of the recent advances made in the first principles modeling of electrochemical catalysts. It also discusses the key development, namely the ability to explicitly treat the effects of surface electrification due to electrochemical processes and applied voltages in a computationally efficient manner. The chapter introduces the thermodynamics and statistical mechanics of electrified metal-solution interfaces. It then discusses the structure of the electrode-electrolyte interface and the effects of applied voltages, followed by an overview of the first-principles model and a motivating example. The chapter also provides a brief summary of classical thermodynamics and describes the basics of thermodynamic detour. It considers the thermodynamics of macroscopic systems and introduces several useful fundamental relations. Here, the chapter also considers a system to exist in a certain macrostate, which is a particular thermodynamic state specified by a set of fixed properties such as constant particle number, constant volume, and constant temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synergistic enhancement of nanocellulose foam with dual in situ mineralization and crosslinking reaction

Cellulose nanocrystals (CNCs) foams have recently gained research interests because they are renewable, abundant, biodegradable and exhibit high surface area. However, the application of CNCs-based foams is still challenging, which is attributed to its lack of effective entanglements between the CNCs particles, thus lowering foam properties. In this study, a synergistic enhancement strategy was proposed, based on the in situ mineralization with hydroxyapatite (HAP) layer onto the CNCs surface, followed by a chemical crosslinking reaction. The physical and chemical structures of the composites were analyzed with SEM, STEM, XRD, FTIR, and TGA. By controlling the amount of coated HAP and the crosslinker, it is possible to manufacture a series of CNCs-based foams that are lightweight (50–75 mg/cm 3 ), highly porous (~90%) with high water absorption (>1300%) and outstanding mechanical strength properties (as high as 1.37 MPa). Moreover, our study further indicated that these CNCs/HAP materials could increase the proliferation of rat osteoblast cells. The method developed in this study presents a novel approach to design improved networked CNCs foam, which has the potential to be used in thermal-retardant material, wastewater treatment, tissue engineering, and personal care applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Linear beam stability in periodic focusing systems: Krein signature and band structure

The general question of how a beam becomes unstable has been one of the fundamental research topics among beam and accelerator physicists for several decades. In this study, we revisited the general problem of linear beam stability in periodic focusing systems by applying the concepts of Krein signature and band structure. We numerically calculated the eigenvalues and other associated characteristics of one-period maps, and discussed the stability properties of single-particle motions with skew quadrupoles and envelope perturbations in high-intensity beams on an equal footing. In particular, an application of the Krein theory to envelope instability analysis was newly attempted in this study. Finally, the appearance of instabilities is interpreted as the result of the collision between eigenmodes of opposite Krein signatures and the formation of a band gap.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

CFD-DEM study of bubble properties in a cylindrical fluidized bed of Geldart Group D particles and comparison with prior MRI data

Numerical simulations of a freely bubbling cylindrical fluidized bed are carried out using a coupled computational fluid dynamics and discrete element method (CFD-DEM) model and compared to recent experimental data. The experiments were conducted using high-resolution and high-frequency magnetic resonance imaging providing high-fidelity data of the bubbling within a central 10 mm slice of the bed. Qualitatively, we nd more regular (i.e., less chaotic) structures in the simulated beds than observed experimentally. Quantitatively, however, the bubble diameter and number of bubbles as a function of height within the bed is predicted well by the base model. Unfortunately, the regularity in the simulations manifests as a considerable discrepancy in the speed of the (dense) emulsion phase. The simulated velocity probability distribution functions show an accumulation of low-speed regions and deficiency of high-speed regions. A simple parametric study of the base model is also carried out considering many of the most common CFD-DEM modeling parameters. It is found that the fluid grid size, geometry resolution, transfer kernel and drag law did not have a significant effect on bubble or particle dynamics.

42 ENGINEERING↗
DOE OSTI2024

Interactions in misaligned layered materials

The deliberate introduction of stacking faults has been found to induce properties markedly distinct from those of perfectly stacked particles or sheets, with even minute deviations leading to significant alterations in material characteristics. In this review article, we discuss the effects of stacking faults – both linear and rotational – on surface structures influencing ion adsorption, particle–particle affinity governing crystal growth, friction, and electronic properties. In conclusion, our comprehensive overview sheds light on the multifaceted impact of stacking faults on these phenomena, offering insights that bridge multiple disciplines, and provides numerous interdisciplinary research questions, paving the way for future innovations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Advancing the physics basis for quasi-helically symmetric stellarators

A new optimized quasi-helically symmetric configuration is described that has the desirable properties of improved energetic particle confinement, reduced turbulent transport by three-dimensional shaping and non-resonant divertor capabilities. The configuration presented in this paper is explicitly optimized for quasi-helical symmetry, energetic particle confinement, neoclassical confinement and stability near the axis. Post optimization, the configuration was evaluated for its performance with regard to energetic particle transport, ideal magnetohydrodynamic stability at various values of plasma pressure and ion temperature gradient instability induced turbulent transport. The effects of discrete coils on various confinement figures of merit, including energetic particle confinement, are determined by generating single-filament coils for the configuration. Preliminary divertor analysis shows that coils can be created that do not interfere with expansion of the vessel volume near the regions of outgoing heat flux, thus demonstrating the possibility of operating a non-resonant divertor.

Physics↗
DOE OSTI2021

Screening of metal complexes and organic solvents using the COSMOSAC-LANL model to enhance the energy density in a non-aqueous redox flow cell: an insight into the solubility

In this paper, we have proposed a first-principles methodology to screen transition metal complexes against a particular organic solvent and organic solvents against a particular transition metal complex based on their solubility information without the knowledge of heat of fusion and melting temperature. The energy density of a non-aqueous redox flow cell directly depends on the solubility of the redox active species in the non-aqueous medium. Here, we have used the “COSMOSAC-LANL” activity coefficient model which is based on first-principles COSMO calculations where the microscopic information is passed to the macroscopic world via a dielectric continuum solvation model, followed by a post-statistical thermodynamic treatment of the self-consistent properties of the solute particle to calculate the solubility. To model the activity coefficient at infinite dilution for the binary mixtures, a 3-suffix Margules (3sM) function is introduced for the quantitative estimation of the asymmetric interactions and, for the combinatorial term, the Staverman–Guggenheim (SG) form is used. The new activity coefficient model is separately called the “LANL” activity coefficient model. The metal complex and the organic solvent have been treated as a simple binary mixture. The present model has been applied to a set of 14 different organic solvents and 16 different transition metal complexes. Using the new LANL activity coefficient model in combination with the ADF-COSMOSAC-2013 model, we have shown how one can improve the solubility of a transition metal complex in an organic solvent. We applied our model to screen 84 binary mixtures to predict the compatible pair of redox active species and organic solvent to increase the energy density. The solvation mechanism of the transition metal complexes in the organic solvents was obtained using the new model. The results have been compared with the experimental and theoretical results where they are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Light-induced electron spin qubit coherences in the purple bacteria reaction center protein

Photosynthetic reaction center proteins (RCs) provide ideal model systems for studying quantum entanglement between multiple spins, a quantum mechanical phenomenon wherein the properties of the entangled particles become inherently correlated. Following light-generated sequential electron transfer, RCs generate spin-correlated radical pairs (SCRPs), also referred to as entangled spin qubit (radical) pairs (SQPs). Understanding and controlling coherence mechanisms in SCRP/SQPs is important for realizing practical uses of electron spin qubits in quantum sensing applications. The bacterial RC (bRC) provides an experimental system for exploring quantum effects in the SCRP P 865 + Q A − , where P 865 , a special pair of bacteriochlorophylls, is the primary donor, and Q A is the primary quinone acceptor. In this study, we focus on understanding how local molecular environments and isotopic substitution, particularly deuteration, influence spin coherence times (T M ). Using high-frequency electron paramagnetic resonance (EPR) spectroscopy, we observed that the local environment surrounding P 865 and Q A plays a significant role in determining T M . Our findings show that while deuteration led to a modest increase in T M , particularly at low temperatures, but the effect was substantially smaller than predicted by classical nuclear spin diffusion alone. This result is in contrast to our previous study of the photosystem I (PSI) RC, where no increase in T M was observed upon deuteration. Theoretical modeling identified several methyl groups at key distances from the spin centers of both bRC and PSI, and methyl group tunneling at low temperatures has been previously suggested as a mechanism for enhanced spin decoherence. Additionally, our study revealed a strong dependence of spin coherence on the orientation of the external magnetic field, highlighting the influence of the protein microenvironment on spin dynamics. In conclusion, these results offer new insights for optimizing coherence times in quantum system design for quantum information science and sensing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Preliminary benchmarks and analysis of boundary conditions in a trenched microstructured silicon radiation detector

Microstructured neutron detectors have the benefit of enhanced neutron detection efficiency as compared to planar devices, achieved by etching 6 LiF-filled trenches on the top surface of a silicon PIN diode. This sensor geometry results in a complex electric field distribution and depletion characteristics within the diode under reverse bias. For the first time on record, the effects of a fixed oxide charge on the microstructured device depletion characteristics and mobile carrier transport is investigated. Prototype detectors were fabricated with non-conformal surface doping. Capacitance voltage and current voltage measurements were performed for these prototypes and compared with COMSOL Multiphysics simulations. A spectral response from an 241Am alpha particle source was acquired and analyzed. It was found that monoenergetic alpha particles produce three prominent peaks in the pulse height spectrum output by the device. The peaks were confirmed by simulations to correlate with dead layers and incident trajectories into the microstructure. It was also found that significant differences in pulse rise time result, corresponding with events arriving in a low-field region in the fins and a high-field region in the bulk. Geant4 was utilized for radiation transport, interaction modeling, and benchmarking the spectral data. The results of this simulation work provide confidence in the ability to attain and benchmark electrical characteristics and spectral data for semiconductor radiation detectors employing complex microstructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗