Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

The discharge mode transition and O({sup 5}p{sub 1}) production mechanism of pulsed radio frequency capacitively coupled plasma

The discharge mode transition from uniform plasma across the gas gap to the {alpha} mode happens at the rising phase of the pulsed radio frequency capacitively coupled plasma (PRF CCP). This transition is attributed to the fast increasing stochastic heating at the edge of sheath. In the second stage with the stable current and voltage amplitude, the consistency between experimental and numerical spatial-temporal 777 nm emission profile suggests that He* and He{sub 2}* dominate the production of O({sup 5}p{sub 1}) through dissociation and excitation of O{sub 2}. Finally, the sterilization efficiency of PRF CCP is found to be higher than that of plasma jet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear plasma experiments in geospace with gigawatts of RF power at HAARP

The ionosphere is the ionized uppermost layer of our atmosphere (from 70 – 500 km altitude) where free electron densities yield peak critical frequencies in the HF (3 – 30 MHz) range. The ionosphere thus provides a quiescent plasma target, stable on timescales of minutes, for a whole host of active plasma experiments. High power RF experiments on ionospheric plasma conducted in the U.S. have been reported since 1970. The largest HF transmitter built to date is the HAARP phased-array HF transmitter near Gakona, Alaska which can deliver up to 3.6 Gigawatts (ERP) of CW RF power in the range of 2.8 – 10 MHz to the ionosphere with microsecond pointing, power modulation, and frequency agility. With an ionospheric background thermal energy in the range of only 0.1 eV, this amount of power gives access to the highest regimes of the nonlinearity (RF intensity to thermal pressure) ratio. HAARP’s unique features have enabled the conduct of a number of unique nonlinear plasma experiments in the interaction region of overdense ionospheric plasma including generation of artificial aurorae, artificial ionization layers, VLF wave-particle interactions in the magnetosphere, parametric instabilities, stimulated electromagnetic emissions (SEE), strong Langmuir turbulence (SLT) and suprathermal electron acceleration. Diagnostics include the Modular UHF Ionospheric Radar (MUIR) sited at HAARP, the SuperDARN-Kodiak HF radar, spacecraft radio beacons, HF receivers to record stimulated electromagnetic emissions (SEE) and telescopes and cameras for optical emissions. We report on short timescale ponderomotive overshoot effects, artificial field-aligned irregularities (AFAI), the aspect angle dependence of the intensity of the HF-enhanced plasma line, and production of suprathermal electrons. One of the primary missions of HAARP, has been the generation of ELF (300 – 3000 Hz) and VLF (3 – 30 kHz) radio waves which are guided to global distances in the Earth-ionosphere waveguide. We review recent efforts to improve the efficiency of the generation ELF/VLF and develop alternative mechanisms that do not require a natural ionospheric current. Applications include the controlled study of ionospheric irregularities affecting spacecraft communication and navigation systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DBD plasma-assisted ethanol steam reforming for green H 2 production: Process optimization through response surface methodology (RSM)

Herein this work investigates ethanol steam reforming (ESR) to produce hydrogen (H 2 ) in a dielectric barrier discharge (DBD) plasma reactor. A five-level, three-factor experiment design was performed using a response surface methodology (RSM) to evaluate the combined effects of the three process parameters, including discharge power, total flow rate, and ethanol-to-water (EtOH/H 2 O) molar ratio on the plasma-assisted ESR reaction. Quadratic regression models were employed in RSM to fit the experimental results and present the correlation between process parameters and targeted responses (EtOH conversion, H 2 yield, H 2 selectivity, and specific energy requirement (SER) for H 2 production). The results suggested that the EtOH/H 2 O molar ratio is considered to have the most significant effect on the EtOH conversion and H 2 , H 2 selectivity, while the total flow rate is the most significant parameter determining SER for H 2 production. Process optimization demonstrated the optimal process conditions, including a discharge power of 55.9 W, a total flow rate of 26.7 ml/min, and an EtOH/H 2 O molar ratio equal to 0.34. A validation test was performed and confirmed the feasibility of the optimization process.

08 HYDROGEN↗

Modification of nuclear transitions in stellar plasma by electronic processes: K isomers in {sup 176}Lu and {sup 180}Ta under s-process conditions

The influence of the stellar plasma on the production and destruction of K isomers is studied for the examples {sup 176}Lu and {sup 180}Ta. Individual electromagnetic transitions are enhanced predominantly by nuclear excitation by electron capture, whereas the other mechanisms of electron scattering and nuclear excitation by electron transition give only minor contributions. It is found that individual transitions can be enhanced significantly for low transition energies below 100 keV. Transitions with higher energies above 200 keV are practically not affected. Although one low-energy transition in {sup 180}Ta is enhanced by up to a factor of 10, the stellar transition rates from low-K to high-K states via so-called intermediate states in {sup 176}Lu and {sup 180}Ta do not change significantly under s-process conditions. The s-process nucleosynthesis of {sup 176}Lu and {sup 180}Ta remains essentially unchanged.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Post-inflationary gravitino production revisited

We revisit gravitino production following inflation. As a first step, we review the standard calculation of gravitino production in the thermal plasma formed at the end of post-inflationary reheating when the inflaton has completely decayed. Next we consider gravitino production prior to the completion of reheating, assuming that the inflaton decay products thermalize instantaneously while they are still dilute. We then argue that instantaneous thermalization is in general a good approximation, and also show that the contribution of non-thermal gravitino production via the collisions of inflaton decay products prior to thermalization is relatively small. Our final estimate of the gravitino-to-entropy ratio is approximated well by a standard calculation of gravitino production in the post-inflationary thermal plasma assuming total instantaneous decay and thermalization at a time t ≅ 1.2/Γ{sub φ}. Finally, in light of our calculations, we consider potential implications of upper limits on the gravitino abundance for models of inflation, with particular attention to scenarios for inflaton decays in supersymmetric Starobinsky-like models.

79 ASTRONOMY AND ASTROPHYSICS↗

Note: Characterization of the plasma parameters of a capillary discharge-produced plasma channel waveguide to guide an intense laser pulse

We demonstrated the production of an optical waveguide in a capillary discharge-produced plasma using a cylindrical capillary. Plasma parameters of its waveguide were characterized by use of both a Nomarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 400 A. An ultrashort, intense laser pulse was guided by use of this plasma channel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interactions of chlorine plasmas with silicon chloride-coated reactor walls during and after silicon etching

The interplay between chlorine inductively coupled plasmas (ICP) and reactor walls coated with silicon etching products has been studied in situ by Auger electron spectroscopy and line-of-sight mass spectrometry using the spinning wall method. A bare silicon wafer mounted on a radio frequency powered electrode (-108 V dc self-bias) was etched in a 13.56 MHz, 400 W ICP. Etching products, along with some oxygen due to erosion of the discharge tube, deposit a Si-oxychloride layer on the plasma reactor walls, including the rotating substrate surface. Without Si-substrate bias, the layer that was previously deposited on the walls with Si-substrate bias reacts with Cl-atoms in the chlorine plasma, forming products that desorb, fragment in the plasma, stick on the spinning wall and sometimes react, and then desorb and are detected by the mass spectrometer. In addition to mass-to-charge (m/e) signals at 63, 98, 133, and 168, corresponding to SiCl{sub x} (x = 1 - 4), many Si-oxychloride fragments with m/e = 107, 177, 196, 212, 231, 247, 275, 291, 294, 307, 329, 345, 361, and 392 were also observed from what appear to be major products desorbing from the spinning wall. It is shown that the evolution of etching products is a complex 'recycling' process in which these species deposit and desorb from the walls many times, and repeatedly fragment in the plasma before being detected by the mass spectrometer. SiCl{sub 3} sticks on the walls and appears to desorb for at least milliseconds after exposure to the chlorine plasma. Notably absent are signals at m/e = 70 and 72, indicating little or no Langmuir-Hinshelwood recombination of Cl on this surface, in contrast to previous studies done in the absence of Si etching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fludrocortisone stimulates erythropoietin production in the intercalated cells of the collecting ducts

Erythropoietin has been thought to be secreted to plasma soon after the production because of the difficulty of Western blot analysis and immunohistochemistry. We established the new methods of Western blot analysis and immunohistochemistry. Using the new methods, we investigated the effects of aldosterone and fludrocortisone, an analogue of aldosterone on erythropoietin mRNA and protein production by the kidneys. Aldosterone stimulated Epo and HIF2α mRNA expressions in tubule suspensions and microdissected medullary thick ascending limbs and outer medullary collecting ducts. Western blot analysis showed a recombinant erythropoietin at 34–45 kDa and kidney erythropoietin at 36–40 and 42 kDa, both of which shifted to 22 kDa by deglycosylation. Erythropoietin protein expression was observed in the nephrons but not in the interstitial cells in control condition. Fludrocortisone stimulated erythropoietin mRNA and protein expressions in the distal nephrons, particularly in the intercalated cells of the collecting ducts. These data show that erythropoietin is produced by the nephrons by the regulation of renin-angiotensin-aldosterone system and not by the renal interstitial cells in control condition.

60 APPLIED LIFE SCIENCES↗

Thermochemically evolved nanoplatelets of bismuth selenide with enhanced thermoelectric figure of merit

We firstly present a simple thermochemical method to fabricate high-quality Bi{sub 2}Se{sub 3} nanoplatelets with enhanced figure of merit using elemental bismuth and selenium powders as precursors. The crystal structure of as synthesized products is characterized via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscopy (HRTEM) measurements. Morphological and chemical synthetic parameters are investigated through a series of experiments; thickness and composition of the platelets are well controlled in large scale production. Subsequently spark plasma sintering (SPS) is performed to fabricate n-type nanostructured bulk thermoelectric materials. Raman Spectroscopy of the two selected samples with approximately of 50 and 100 nm thicknesses shows three vibrational modes. The lower thickness sample exhibits the maximum red shift of about 2.17 cm{sup -1} and maximum broadening of about 10 cm{sup -1} by in-plane vibrational mode E{sup 2}{sub g}. The enhanced value of figure of merit ∼0.41 is obtained for pure phase bismuth selenide to the best of our knowledge. We observe metallic conduction behavior while semiconducting behavior for nanostructured bismuth selenide is reported elsewhere which could be due to different synthetic techniques adopted. These results clearly suggest that our adopted synthetic technique has profound effect on the electronic and thermoelectric transport properties of this material.

36 MATERIALS SCIENCE↗

Characteristics of silicon etching by silicon chloride ions

Plasmas generated from halogen-containing gases, such as Cl{sub 2} or HBr, have been widely used in gate etching processes for semiconductor chip manufacturing. Such plasmas may contain silicon halide ions formed by the ionization of etching products that enter the plasma. In this study, to illustrate Si etching by such silicon halide ions, the sputtering yield of Si by SiCl{sub x}{sup +} (with x = 1 or 3) ions has been obtained as a function of the incident ion energy by using a mass-selected ion beam injection system. It has been found that, at sufficiently low energy, the incidence of SiCl{sup +} ions leads to the deposition of Si which may affect profile control in microelectronic device fabrication processes.

36 MATERIALS SCIENCE↗

Collaborative Research: Explosive reconnection in relativistic magnetically-dominated plasmas (Final Report)

Magnetic fields can be the dominant component of astrophysical plasmas, so that the magnetic energy density might exceed even the rest-mass energy density of matter. In this extreme (and largely unexplored) regime the magnetic field controls the overall plasma evolution, dissipation, and acceleration of non-thermal particles. This plasma regime, applicable to a variety of astrophysical sources - magnetars, pulsars and pulsar wind nebulae (PWNe), jets of Active Galactic Nuclei (AGNs) and Gamma-Ray Bursters (GRBs) - is dramatically different from laboratory plasmas, the magnetospheres of planets, and the interplanetary plasma. Relativistic astrophysical sources then provide an unique opportunity to study the fundamental plasma physics of magnetically-dominated plasmas; a novel and fast-evolving field of theoretical research which, by investigating energy conversion and particle energization processes in plasmas, is of vital importance to the Fusion Energy Sciences DoE program. Data coming from astrophysical high-energy missions, especially the Crab Nebula flares recently observed by the Fermi and AGILE satellites, suggest that the acceleration of non-thermal particles to the highest energies occurs in magnetic reconnection events - a major change of paradigm in high-energy astrophysics. Most importantly, observations demand that particle acceleration should proceed extremely fast (with accelerating electric field of the order of the magnetic field) and on macroscopic scales (much larger, e.g., than the microscopic plasma skin depth). We are conducting studies of the microphysics of magnetically-dominated plasmas focussing in particular on the highly dynamic regime of explosive reconnection and associated particle acceleration in relativistic plasmas. We are studying the stability and explosive plasma dynamics, particle acceleration and radiation production in a number of idealized plasma configurations that approximate relevant astrophysical sources (like the magnetic ABC structures and interacting flux tubes, as well as generalizations of analytical models of X-point collapse to relativistic plasmas). The well-studied case of the Crab Nebula is taken as a prototypical example for the application of the model. We are combining analytical studies of explosive magnetic dynamics and dissipation in relativistic plasmas with particle-in-cell (PIC) simulations and fluid simulations. The theoretical model, fluid and particle-in-cell simulations are cross-checked for agreement and convergence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct nuclear-powered lasers

The development of direct nuclear pumped lasers is reviewed. Theoretical and experimental investigations of various methods of converting the energy of nuclear fission fragments to laser power are summarized. The development of direct nuclear pumped lasers was achieved. The basic processes involved in the production of a plasma by nuclear radiation were studied. Significant progress was accomplished in this area and a large amount of basic data on plasma formation and atomic and molecular processes leading to population inversions is available.

Jalufka, N. W.↗

Ion bombardment experiments suggesting an origin for organic particles in pre-cometary and cometary ices

During the Giotto and Vega encounters with Comet Halley both organic particles called CHON and energetic ions were detected. The acceleration of ions to hundreds of keV in the vicinity of the bow shock and near the nucleus may be a demonstration of a situation occurring in the early solar system (perhaps during the T Tauri stage) that led to the formation of organic particles only now released. Utilizing a Van de Graaff accelerator and a target chamber having cryogenic and mass spectrometer capabilities, frozen gases were bombarded at 10 K with 175 keV protons with the result that fluffy solid material remains after sublimation of the ice. Initial experiments were carried out with a gas mixture in parts of 170 carbon monoxide, 170 argon, 25 water, 20 nitrogen, and 15 methane formulated to reflect an interstellar composition in experiments involving the freezing out of the products of a plasma. The plasma experiments resulted in a varnish-like film residue that exhibited luminescence when excited with ultraviolet radiation, while the ion bombardment created particulate material that was not luminescent.

Wdowiak, Thomas J.↗

Physics of the central engine

Physical processes which may be important in the central engines of AGNs are discussed. Black hole accretion models have been elaborated during the past few years, and provide a plausible framework for jet and spectrum formation. However, the specific mechanisms responsible for producing the observed continuum radiation remain uncertain. Consideration is given to nonthermal models for the IR continuum, constraints on thermal plasma, and the production of relativistic electrons.

Begelman, Mitchell C.↗

Magnetic Flux Compression Reactor Concepts for Spacecraft Propulsion and Power (MSFC Center Director's Discretionary Fund; Project No. 99-24)

This technical publication (TP) examines performance and design issues associated with magnetic flux compression reactor concepts for nuclear/chemical pulse propulsion and power. Assuming that low-yield microfusion detonations or chemical detonations using high-energy density matter can eventually be realized in practice, various magnetic flux compression concepts are conceivable. In particular, reactors in which a magnetic field would be compressed between an expanding detonation-driven plasma cloud and a stationary structure formed from a high-temperature superconductor are envisioned. Primary interest is accomplishing two important functions: (1) Collimation and reflection of a hot diamagnetic plasma for direct thrust production, and (2) electric power generation for fusion standoff drivers and/or dense plasma formation. In this TP, performance potential is examined, major technical uncertainties related to this concept accessed, and a simple performance model for a radial-mode reactor developed. Flux trapping effectiveness is analyzed using a skin layer methodology, which accounts for magnetic diffusion losses into the plasma armature and the stationary stator. The results of laboratory-scale experiments on magnetic diffusion in bulk-processed type II superconductors are also presented.

Litchford, R. J.↗

Reaction mechanisms of atomic layer deposition of TaN{sub x} from Ta(NMe{sub 2}){sub 5} precursor and H{sub 2}-based plasmas

The reaction mechanisms of plasma-assisted atomic layer deposition (ALD) of TaN{sub x} using Ta(NMe{sub 2}){sub 5} were studied using quadrupole mass spectrometry (QMS). The fact that molecule dissociation and formation in the plasma have to be considered for such ALD processes was illustrated by the observation of 4% NH{sub 3} in a H{sub 2}-N{sub 2} (1:1) plasma. Using QMS measurements the reaction products during growth of conductive TaN{sub x} using a H{sub 2} plasma were determined. During the Ta(NMe{sub 2}){sub 5} exposure the reaction product HNMe{sub 2} was detected. The amount of adsorbed Ta(NMe{sub 2}){sub 5} and the amount of HNMe{sub 2} released were found to depend on the number of surface groups generated during the plasma step. At the beginning of the plasma exposure step the molecules HNMe{sub 2}, CH{sub 4}, HCN, and C{sub 2}H{sub 2} were measured. After an extended period of plasma exposure, the reaction products CH{sub 4} and C{sub 2}H{sub 2} were still present in the plasma. This change in the composition of the reaction products can be explained by an interplay of aspects including the plasma-surface interaction, the ALD surface reactions, and the reactions of products within the plasma. The species formed in the plasma (e.g., CH{sub x} radicals) can re-deposit on the surface and influence to a large extent the TaN{sub x} material composition and properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Innovative techniques for the production of energetic radicals for lunar processing including cold plasma processing of local planetary ores

Hydrogen reduction of ilmenite has been studied by a number of investigators as a potential means for recovery of oxygen from lunar soil. Interest in this process has always rested with the simplicity of the flow diagram and the utilization of established technology. Effective utilization of hydrogen in the reduction process at temperatures of 1200 C and below has always been disappointing and, as such, has led other investigators to focus attention on other systems. Effective utilization of hydrogen in the reduction of ilmenite can be significantly enhanced in the presence of a non-equilibrium hydrogen plasma. Ilmenite at solid specimen temperatures of 600 C to 970 C were reacted in a hydrogen plasma. Those experiments revealed that hydrogen utilization can be significantly enhanced. At a specimen temperature of 850 C the fraction of H2 reacted was 24 percent compared to the 7 percent theoretical limit calculated with thermodynamic theory for the same temperature. An added advantage for a hydrogen plasma involves further reduction of TiO2. Reduction of the iron oxide in ilmenite yields TiO2 and metallic iron as by products. Titanium forms a number of oxides including TiO, Ti2O3, Ti3O5 and the Magneli oxides (Ti4O7 to Ti50O99). In conventional processing of ilmenite with hydrogen it is possible to reduce TiO2 to Ti7O13 within approximately an hour, but with poor utilization of hydrogen on the order of one mole of H2 per thousand. In the cold or non-equilibrium plasma TiO2 can be rapidly reduced to Ti2O3 with hydrogen utilization exceeding 10 percent. Based on design considerations of the plasma reactor greater utilization of the hydrogen in the reduction of TiO2 is possible.

Bullard, D.↗

Towards a better comprehension of plasma formation and heating in high performances electron cyclotron resonance ion sources (invited)

Further improvements of electron cyclotron resonance ion sources (ECRIS) output currents and average charge state require a deep understanding of electron and ion dynamics in the plasma. This paper will discuss the most recent advances about modeling of non-classical evidences like the sensitivity of electron energy distribution function to the magnetic field detuning, the influence of plasma turbulences on electron heating and ion confinement, the coupling between electron and ion dynamics. All these issues have in common the non-homogeneous distribution of the plasma inside the source: the abrupt density drop at the resonance layer regulates the heating regimes (from collective to turbulent), the beam formation mechanism and emittance. Possible means to boost the performances of future ECRIS will be proposed. In particular, the use of Bernstein waves, in preliminary experiments performed at Laboratori Nazionali del Sud (LNS) on MDIS (microwave discharge ion sources)-type sources, has permitted to sustain largely overdense plasmas enhancing the warm electron temperature, which will make possible in principle the construction of sources for high intensity multicharged ions beams with simplified magnetic structures.

43 PARTICLE ACCELERATORS↗