General optics evaluation program (GENOPTICS)
Program prints and plots results of computations such as ray traces, radial energy distributions, and designs of two-mirror telescopes.
Howell, B. J.↗
SEARCH · Engineering Papers
Results for “Optical computing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Monte Carlo simulation of wave sensing with a short pulse radar
A Monte Carlo simulation is used to study the ocean wave sensing potential of a radar which scatters short pulses at small off-nadir angles. In the simulation, realizations of a random surface are created commensurate with an assigned probability density and power spectrum. Then the signal scattered back to the radar is computed for each realization using a physical optics analysis which takes wavefront curvature and finite radar-to-surface distance into account. In the case of a Pierson-Moskowitz spectrum and a normally distributed surface, reasonable assumptions for a fully developed sea, it has been found that the cumulative distribution of time intervals between peaks in the scattered power provides a measure of surface roughness. This observation is supported by experiments.
Levine, D. M.↗
Econ's optimal decision model of wheat production and distribution-documentation
The report documents the computer programs written to implement the ECON optical decision model. The programs were written in APL, an extremely compact and powerful language particularly well suited to this model, which makes extensive use of matrix manipulations. The algorithms used are presented and listings of and descriptive information on the APL programs used are given. Possible changes in input data are also given.
Source record↗
Adjacency effects on imaging by surface reflection and atmospheric scattering - Cross radiance to zenith
The paper discusses an analytical solution for the nadir radiance as measured from a satellite, based on a simplified single-scattering approximation in which the scattered radiation is not subject to extinction. In the solution, terms can be identified as due to a reflection from the vicinity of the object pixel, and respectively, (1) upward scattering to zenith above the object pixel (cross radiance), and (2) downward scattering from the entire atmosphere to the object pixel (cross irradiance). It is shown that the cross radiance is proportional to the forward scattering optical thickness, as defined, and the cross irradiance to the backscattering optical thickness. In addition, explicit expressions and computer solutions for the cross radiance from annular or from rectangular reflecting areas are presented. It is concluded that the effect depends on the height distribution and on the sharpness of the forward peak of the scattering particles.
Otterman, J.↗
Laser-optical blade tip clearance measurement system
A laser-optical measurement system was developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.
Barranger, J. P.↗
Laser-optical blade tip clearance measurement system
The need for blade tip clearance instrumentation has been intensified recently by advances in technology of gas turbine engines. A new laser-optical measurement system has been developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.
Barranger, J. P.↗
Q0957+561 - Detailed models of the gravitational lens effect
The galaxy responsible for causing multiple gravitational lens images of QSO Q0957+561 has been reobserved spectroscopically and a more accurate redshift of 0.36 was obtained. In addition, detailed models of the gravitational lens effect were computed. These models, which can explain all optical and radio data for the system, predict delays of up to five years between variations in the A and B images (with A preceding B). It is suggested that the third image is rather faint and located close to the center of the lens galaxy; it is possible that this third image contributes to the observed galaxy core. The possibility that this system can be used to measure the Hubble constant is discussed.
Young, P.↗
A conceptual design study of point focusing thin-film solar concentrators
Candidates for reflector panel design concepts, including materials and configurations, were identified. The large list of candidates was screened and reduced to the five most promising ones. Cost and technical factors were used in making the final choices for the panel conceptual design, which was a stiffened steel skin substrate with a bonded, acrylic overcoated, aluminized polyester film reflective surface. Computer simulations were run for the concentrator optics using the selected panel design, and experimentally determined specularity and reflectivity values. Intercept factor curves and energy to the aperture curves were produced. These curves indicate that surface errors of 2 mrad (milliradians) or less would be required to capture the desired energy for a Brayton cycle 816 C case. Two test panels were fabricated to demonstrate manufacturability and optically tested for surface error. Surface errors in the range of 1.75 mrad and 2.2 mrad were measured.
Source record↗
Acoustic ground impedance meter
A method and apparatus are presented for measuring the acoustic impedance of a surface in which the surface is used to enclose one end of the chamber of a Helmholz resonator. Acoustic waves are generated in the neck of the resonator by a piston driven by a variable speed motor through a cam assembly. The acoustic waves are measured in the chamber and the frequency of the generated acoustic waves is measured by an optical device. These measurements are used to compute the compliance and conductance of the chamber and surface combined. The same procedure is followed with a calibration plate having infinite acoustic impedance enclosing the chamber of the resonator to compute the compliance and conductance of the chamber alone. Then by subtracting, the compliance and conductance for the surface is obtained.
Zuckerwar, A. J.↗
Performance of OOK and low-order PPM modulations in optical communications when using APD-based receivers
The paper computes direct detection laser communications receiver performance when using avalanche photodiode (APD) detectors. The performances are compared in terms of bit error probability vs average signal required per bit when the transmitter uses either on-off keying (OOK) or low-order PPM formats. It is shown that QPPM requires 3 dB less signal than OOK, while BPPM requires the same or slightly more than OOK for the same performance. Optimum APD gain values range from 200 to 400. When using QPPM, k(eff) = 0.006, and optimum gain, 60 signal counts/bit are required at 500 Mbits/s for a 0.000001 bit error probability. It is concluded that QPPM may be an attractive signaling format for some fiber or free space laser communication applications.
Abshire, J. B.↗
Near-optimum design of GaAs-based concentrator space solar cells for 80 C operation
Using a detailed computer simulation model and reasonable values of optical, geometrical and material parameters from current published literature, parameter optimization studies were performed on two cell geometries, namely, the circular geometry for a Cassegrainian concentrator with 100 AM0, 80 C operation and the rectangular geometry for a venetian blind concentrator with 20 AM0, 80 C operation. For each cell geometry, three cell configurations were considered: p/n AlGaAs/GaAs; n/p AlGaAs/GaAs; and, n/p GaAs shallow homojunction. The studies show the possibility of designing GaAs-based space solar cells with beginning-of-life efficiencies exceeding 22 percent at 20 to 100 AM0, 80 C and probable efficiency degradation of less than 15 percent after a 70 percent reduction in diffusion length in each cell region.
Goradia, C.↗
Particle phase function measurements by a new Fiber Array Nephelometer: FAN 1
A fiber array polar nephelometer of advanced design, the FAN I is capable of in-situ phase function measurements of scattered light from man-made or natural atmospheric particles. The scattered light is measured at 100 different angles throughout 360 degrees, thus providing a potential measurement of the asymmetry of irregularly shaped particles. Phase functions can be measured at 10 to 100 Hz rates and the range of measurable single particle sizes is from 5 micron m to as large as 8mm. For particles smaller than 5 micro m the ensemble average can be measured. The FAN I is microprocessor controlled and the data may be stored on floppy disk or printed out in tabular and/or graphical form. The optical head may be separated from the computer system for operation in field or adverse conditions. Examples of laboratory measured scattering phase functions obtained with the FAN I for spherical particles is given to illustrate its measurement capabilities.
Farmer, W. M.↗
Digital cartography of the planets - New methods, its status, and its future
A system has been developed that establishes a standardized cartographic database for each of the 19 planets and major satellites that have been explored to date. Compilation of the databases involves both traditional and newly developed digital image processing and mosaicking techniques, including radiometric and geometric corrections of the images. Each database, or digital image model (DIM), is a digital mosaic of spacecraft images that have been radiometrically and geometrically corrected and photometrically modeled. During compilation, ancillary data files such as radiometric calibrations and refined photometric values for all camera lens and filter combinations and refined camera-orientation matrices for all images used in the mapping are produced. The system is designed to aid in the following: access to and utilization of spatial data returned by planetary spacecraft; coregistration of cartographic image and topographic elevation models with geological, geophysical, and geochemical databases; and the design and preparation of both standard and custom map products. A major goal of the project is to publish the DIMs on compact computer-compatible media such as digital-optical (CD-ROM) disks.
Batson, R. M.↗
Imaging phased telescope array study
The problems encountered in obtaining a wide field-of-view with large, space-based direct imaging phased telescope arrays were considered. After defining some of the critical systems issues, previous relevant work in the literature was reviewed and summarized. An extensive list was made of potential error sources and the error sources were categorized in the form of an error budget tree including optical design errors, optical fabrication errors, assembly and alignment errors, and environmental errors. After choosing a top level image quality requirment as a goal, a preliminary tops-down error budget allocation was performed; then, based upon engineering experience, detailed analysis, or data from the literature, a bottoms-up error budget reallocation was performed in an attempt to achieve an equitable distribution of difficulty in satisfying the various allocations. This exercise provided a realistic allocation for residual off-axis optical design errors in the presence of state-of-the-art optical fabrication and alignment errors. Three different computational techniques were developed for computing the image degradation of phased telescope arrays due to aberrations of the individual telescopes. Parametric studies and sensitivity analyses were then performed for a variety of subaperture configurations and telescope design parameters in an attempt to determine how the off-axis performance of a phased telescope array varies as the telescopes are scaled up in size. The Air Force Weapons Laboratory (AFWL) multipurpose telescope testbed (MMTT) configuration was analyzed in detail with regard to image degradation due to field curvature and distortion of the individual telescopes as they are scaled up in size.
Harvey, James E.↗
A digitally controlled system for effecting and presenting a selected electrical resistance
A digitally controlled resistance generator is described, in which resistors having values selected according to an expression 2(sup N-1)(R), where N is equal to the number of terms in the expression, and R is equal to the lowest value of resistance, are electrically inserted into a resistive circuit in accordance with a parallel binary signal provided by an analog-to-digital converter or a programmable computer. This binary signal is coupled via optical isolators which, when activated by a logical 1, provides a negative potential to some or all of the gate inputs of the normally on field effect transistors which, when on, shorts out the associated resistor. This applied negative potential turns the field effect transistors off and electrically inserts the resistor coupled between the source terminal and the drain terminal of that field effect transistor into the resistive circuit between the terminals.
Fletcher, James C.↗
Correlation of optical phase distortion with turbulent structure in a homogeneous shear flow
The relative importance of small-scale and large-scale turbulent structure to phase distortion in propagation through the homogeneous shear flow is the focus of this study. The importance of large-scale vortical structure and the associated scalar distribution to optical distortion induced by propagation through a turbulent shear flow has been established (Truman and Lee 1989). Phase errors induced in a coherent optical beam by these turbulent fluctuations are computed. This scalar field shows elongated regions of intense fluctuations which have an inclination with respect to the mean flow similar to that of the characteristic hairpin eddies. Long-term plans include an examination of the effects of inhomogeneity through consideration of direct numerical simulations of the channel flow, boundary layer or mixing layer.
Truman, C. Randall↗
Advanced computing
Advanced concepts in hardware, software and algorithms are being pursued for application in next generation space computers and for ground based analysis of space data. The research program focuses on massively parallel computation and neural networks, as well as optical processing and optical networking which are discussed under photonics. Also included are theoretical programs in neural and nonlinear science, and device development for magnetic and ferroelectric memories.
Source record↗
Visual information processing II; Proceedings of the Meeting, Orlando, FL, Apr. 14-16, 1993
Various papers on visual information processing are presented. Individual topics addressed include: aliasing as noise, satellite image processing using a hammering neural network, edge-detetion method using visual perception, adaptive vector median filters, design of a reading test for low-vision image warping, spatial transformation architectures, automatic image-enhancement method, redundancy reduction in image coding, lossless gray-scale image compression by predictive GDF, information efficiency in visual communication, optimizing JPEG quantization matrices for different applications, use of forward error correction to maintain image fidelity, effect of peanoscanning on image compression. Also discussed are: computer vision for autonomous robotics in space, optical processor for zero-crossing edge detection, fractal-based image edge detection, simulation of the neon spreading effect by bandpass filtering, wavelet transform (WT) on parallel SIMD architectures, nonseparable 2D wavelet image representation, adaptive image halftoning based on WT, wavelet analysis of global warming, use of the WT for signal detection, perfect reconstruction two-channel rational filter banks, N-wavelet coding for pattern classification, simulation of image of natural objects, number-theoretic coding for iconic systems.
Huck, Friedrich O.↗