Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPERATIONAL PROBLEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Integration of active and passive sensors for obstacle avoidance

The automatic obstacle-avoidance guidance problem is studied under the operational constraints imposed by the rotorcraft nap-of-the-earth (NOE) environment. The problem is discussed for two different circumstances. The first assumes that a full range map is available, irrespective of the type of sensor being used. Two approaches are proposed to extend a two-dimensional obstacle-avoidance concept presented by Cheng (1988). The situation where only a sparse range map is available from a passive sensor is also treated. An integrated approach that augments the passive sensor with an active one is discussed, along with the problem of data fusion and how it is affected by the characteristics of NOE flight.

Cheng, Victor H. L.↗

Design and experimental investigation of a single-stage turbine with a rotor entering relative Mach number of 2

The design and experimental investigation of a single-stage supersonic turbine are presented herein. The turbine was designed for a rotor entering relative Mach number of 2. The maximum equivalent specific work output of the turbine at design speed and approximately design over-all pressure ratio was 32.9 BTU per pound at a static efficiency of 0.414. This static efficiency gave good verification to an independent reference that indicated theoretical static efficiencies for similar single-stage turbines within the range 0.40 to 0.45. An experimental ratio of effective rotor blade momentum thickness to mean camber length was determined to be 0.0014, which compares favorably with the results obtained from several transonic and subsonic turbines. The design procedure for this turbine would have been improved by allowing for more rotor losses by assuming a value of this momentum parameter comparable with those obtained from transonic turbines. Removing a large portion of the rotor suction surface enabled a lower static pressure to be felt at the stator exit, at the expense of higher rotor losses. The net result was an improvement in turbine work output of about 3 percent at design setting conditions. No problems associated with supersonic starting were encountered even under the worst conditions of turbine operation with respect to this problem.

Moffitt, Thomas P↗

Scalable Predictive Control and Optimization for Grid Integration of Large-Scale Distributed Energy Resources: Preprint

Integration of a large number of distributed energy resources (DERs) into the power grid needs a scalable power balancing method. We formulate the power balancing problem as a look-ahead optimization problem to be solved sequentially by a power distribution system aggregator based on a model predictive control (MPC) framework. Solving large-scale look-ahead control problem requires proper configuration of the control steps. In this paper, to solve large-scale control problems, we propose a variable time granularity where control time steps nearby the current control step have finer resolutions. The aggregator objective includes maximization of power production revenue and minimization of power purchasing expense, renewable power curtailment, and mileage costs for energy storage and electric vehicle (EV) charging stations while satisfying system capacity and operational constraints. The control problem is formulated as a mixed-integer linear program (MILP) and solved using the XpressMP solver. We perform simulations considering a copper plate representation of a large distribution network consisting of 2507 devices (controllable DERs) including curtailable photovoltaics (PVs), energy storage batteries, EV charging stations, and buildings with heating, ventilation, and air conditioning units (HVACs). We show the effectiveness of the proposed approach in managing DERs interactively for maximum energy trading profit and local supply-demand power balancing. Finally, we demonstrate that the proposed method outperformed other benchmark controllers regarding computation time without compromising operational performance.

DER↗

Scalable Predictive Control and Optimization for Grid Integration of Large-Scale Distributed Energy Resources

Integrating a large number of distributed energy resources (DERs) into the power grid needs a scalable power balancing method. We formulate the power balancing problem as a look-ahead optimization problem to be solved sequentially by a power distribution system aggregator based on a model predictive control (MPC) framework. Solving large-scale look-ahead control problems requires proper configuration of the control steps. In this paper, to solve large-scale control problems, we propose a variable time granularity where control time steps nearby the current control step have finer resolutions. The aggregator objective includes maximization of power production revenue and minimization of power purchasing expense, renewable power curtailment, and mileage costs for energy storage and electric vehicle (EV) charging stations while satisfying system capacity and operational constraints. The control problem is formulated as a mixed-integer linear program (MILP) and solved using the XpressMP solver. We perform simulations considering a copper plate representation of a large distribution network consisting of 2507 devices (controllable DERs), including curtailable photovoltaics (PVs), energy storage batteries, EV charging stations, and buildings with heating, ventilation, and air conditioning units (HVACs). We show the effectiveness of the proposed approach in managing DERs interactively for maximum energy trading profit and local supply-demand power balancing. Finally, we demonstrate that the proposed method outperforms other benchmark controllers regarding computation time without compromising operational performance.

DER↗

Scalable Predictive Control and Optimization for Grid Integration of Large-Scale Distributed Energy Resources

Integrating a large number of distributed energy resources (DERs) into the power grid needs a scalable power balancing method. We formulate the power balancing problem as a look-ahead optimization problem to be solved sequentially by a power distribution system aggregator based on a model predictive control (MPC) framework. Solving large-scale look-ahead control problems requires proper configuration of the control steps. In this paper, to solve large-scale control problems, we propose a variable time granularity where control time steps nearby the current control step have finer resolutions. The aggregator objective includes maximization of power production revenue and minimization of power purchasing expense, renewable power curtailment, and mileage costs for energy storage and electric vehicle (EV) charging stations while satisfying system capacity and operational constraints. The control problem is formulated as a mixed-integer linear program (MILP) and solved using the XpressMP solver. We perform simulations considering a copper plate representation of a large distribution network consisting of 2507 devices (control-lable DERs), including curtailable photovoltaics (PVs), energy storage batteries, EV charging stations, and buildings with heating, ventilation, and air conditioning units (HVACs). We show the effectiveness of the proposed approach in managing DERs interactively for maximum energy trading profit and local supply-demand power balancing. Finally, we demonstrate that the proposed method outperforms other benchmark controllers regarding computation time without compromising operational performance.

DER↗

Measures of operator entanglement of two-qubit gates

Two different measures of operator entanglement of two-qubit gates, namely, Schmidt strength and linear entropy, are studied. While these measures are shown to have a one-to-one relation between them for the Schmidt number 2 class of gates, no such relation exists for the Schmidt number 4 class, implying that the measures are inequivalent in general. Further, we establish a simple relation between linear entropy and local invariants of two-qubit gates. The implication of the relation is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transition probabilities and oscillator strengths of E1 transitions in Fe XII and Fe XIV

Non-orthogonal orbitals in the multiconfiguration Hartree-Fock approach are used to calculate line strengths, oscillator strengths and transition probabilities for E1 transitions among the fine-structure levels of the 3s{sup 2}3p{sup 3}, 3s3p{sup 4}, 3s{sup 2}3p{sup 2}3d, 3s3p{sup 3}3d, 3p{sup 5} and 3s{sup 2}3p3d{sup 2} configurations in Fe XII and 3s{sup 2}3p, 3s3p{sup 2}, 3s{sup 2}3d, 3p{sup 3}, 3s3p3d, 3p{sup 2}3d, 3s3d{sup 2}, 3p3d{sup 2}, 3s{sup 2}4s, 3s{sup 2}4p, 3s3p4s and 3s{sup 2}4d configurations in Fe XIV. The lifetimes of excited levels belonging to these configurations of Fe XII and Fe XIV are also presented. An accurate representation of the levels has been obtained using spectroscopic and correlation radial functions. The wavefunctions exhibit large correlations and significant dependence of one-electron valence orbitals due to both the total and intermediate terms. The relativistic corrections are included through the one-body and two-body operators in the Breit-Pauli Hamiltonian. Progressively larger calculations are performed to check for important electron correlation contributions and for convergence of results. The atomic wavefunctions give excitation energies which are in close agreement with experiment. The present oscillator strengths and transition probabilities compare very well with previous large scale calculations. - Highlights: {yields} Fe XII and Fe XIV oscillator strengths and transition probabilities for E1 transitions. {yields} Energies and lifetimes of excited levels of Fe XII and Fe XIV. {yields} Multiconfiguration Hartree-Fock calculations with non-orthogonal radial functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Flight problem evaluation for Space Shuttle Orbiter

The flight problems experienced with the reusable Space Shuttle Orbiter have decreased during subsequent flights of each vehicle. By comparison to first flights of previous vehicles, the problems encountered on the initial flight of each new vehicle entering the fleet decreased. This improvement in turn has reduced the turnaround time between flights significantly and thus greatly enhanced the increased Space Shuttle launch frequency. The reusable manned space vehicle concept necessitated the development of a flight problem recognition and resolution system which would enable a thorough and timely vehicle turnaround flow. Flight evaluation, testing, and repair of manned spacecraft to enhance reliability and to ensure mission success is a unique activity. Real-time recognition of the flight problem, prompt isolation of the cause, and timely implementation of the corrective action are the keys to maintaining an operational fleet. Examples of flight problems that have been encountered as well as the corrective actions implemented during the first 24 Space Shuttle missions are presented. The corrective actions taken to preclude problem recurrence include modifications of hardware designs, manufacturing processes, flight software, test methods, and operational procedures.

Mechelay, Joseph E.↗

Icing Frequencies Experienced During Climb and Descent by Fighter-Interceptor Aircraft

Data and analyses are presented on the relative frequencies of occurrence and severity of icing cloud layers encountered by jet aircraft in the climb and descent phases of flights to high altitudes. Fighter-interceptor aircraft operated by the Air Defense Command (USAF) at bases in the Duluth and Seattle areas collected the data with icing meters installed for a l-year period. The project was part of an extensive program conducted by the NACA to collect Icing cloud data for evaluating the icing problem relevant to routine operations. The average frequency of occurrence of icing was found to be about 5 percent of the number of climbs and descents during 1 year of operations The icing encounters were predominantly in the low and middle cloud layers, decreasing above 15,000 feet to practically none above 25,000 feet. The greatest thickness of ice that would accumulate on any aircraft component (as indicated by the accretion on a small object) was measured with the icing meters. The ice thicknesses on a small sensing probe averaged less than 1/32 inch and did not exceed 1/2 inch. Such accumulations are relatively small when compared with those that can form during horizontal flight in icing clouds. The light accretions resulted from relatively steep angles of flight through generally thin cloud layers. Because of the limited statistical reliability of the results, an analysis was made using previous statistics on icing clouds below an altitude of 20,000 feet to determine the general icing severity probabilities. The calculations were made using adiabatic lifting as a basis to establish the liquid-water content. Probabilities of over-all ice accretions on a small object as a function of airspeed and rate of climb were computed from the derived water contents. These results were then combined with the probability of occurrence of icing in order to give the icing severity that can be expected for routine aircraft operations.

Perkins, Porter J.↗

Using the MCNP Taylor Series Perturbation Feature (Efficiently) for Shielding Problems

The Taylor series or differential operator perturbation feature was introduced into MCNP in version 4B in the mid-1990's. The perturbation feature has been shown to be unreliable for estimating perturbations in eigenvalue (k{sub eff}) problems. However, for fixed-source (shielding) problems, the perturbation feature can be extremely accurate and deserves to be more widely used. The Taylor series perturbation feature is invoked with the PERT card. In publications until now, a separate MCNP PERT card was used for each perturbed point in a parameter study. In fact, the MCNP manual recommends two PERT cards for each perturbed parameter so that the first- and second-order Taylor terms can be examined independently. The MCNP manual says that 'each perturbation increases running time by 10%- 20%'. Limiting the number of PERT cards is therefore desirable. This paper shows how to compute the two coefficients of a two-term Taylor expansion using only two PERT cards. These coefficients can be used to estimate the perturbed response for any point in a parameter study. The statistical uncertainty can be well estimated from these two PERT cards; it can be computed exactly using three more PERT cards.

42 ENGINEERING↗

Asymptotically perfect discrimination in the local-operation-and-classical-communication paradigm

We revisit the problem of discriminating orthogonal quantum states within the local-quantum-operation-and-classical-communication (LOCC) paradigm. Our particular focus is on the asymptotic situation where the parties have infinite resources and the protocol may become arbitrarily long. Our main result is a necessary condition for perfect asymptotic LOCC discrimination. As an application, we prove that for complete product bases, unlimited resources are of no advantage. On the other hand, we identify an example for which it still remains undecided whether unlimited resources are superior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Runtime and Pressurization Analyses of Propellant Tanks

Multi-element unstructured CFD has been utilized at NASA SSC to carry out analyses of propellant tank systems in different modes of operation. The three regimes of interest at SSC include (a) tank chill down (b) tank pressurization and (c) runtime propellant draw-down and purge. While tank chill down is an important event that is best addressed with long time-scale heat transfer calculations, CFD can play a critical role in the tank pressurization and runtime modes of operation. In these situations, problems with contamination of the propellant by inclusion of the pressurant gas from the ullage causes a deterioration of the quality of the propellant delivered to the test article. CFD can be used to help quantify the mixing and propellant degradation. During tank pressurization under some circumstances, rapid mixing of relatively warm pressurant gas with cryogenic propellant can lead to rapid densification of the gas and loss of pressure in the tank. This phenomenon can cause serious problems during testing because of the resulting decrease in propellant flow rate. With proper physical models implemented, CFD can model the coupling between the propellant and pressurant including heat transfer and phase change effects and accurately capture the complex physics in the evolving flowfields. This holds the promise of allowing the specification of operational conditions and procedures that could minimize the undesirable mixing and heat transfer inherent in propellant tank operation. It should be noted that traditional CFD modeling is inadequate for such simulations because the fluids in the tank are in a range of different sub-critical and supercritical states and elaborate phase change and mixing rules have to be developed to accurately model the interaction between the ullage gas and the propellant. We show a typical run-time simulation of a spherical propellant tank, containing RP-1 in this case, being pressurized with room-temperature nitrogen at 540 R. Nitrogen, shown in blue on the right-hand side of the figures, enters the tank from the diffuser at the top of the figures and impinges on the RP-1, shown in red, while the propellant is being continuously drained at the rate of 1050 lbs/sec through a pipe at the bottom of the tank. The sequence of frames in Figure 1 shows the resultant velocity fields and mixing between nitrogen and RP-1 in a cross-section of the tank at different times. A vortex is seen to form in the incoming nitrogen stream that tends to entrain propellant, mixing it with the pressurant gas. The RP-1 mass fraction contours in Figure 1 are also indicative of the level of mixing and contamination of the propellant. The simulation is used to track the propagation of the pure propellant front as it is drawn toward the exit with the evolution of the mixing processes in the tank. The CFD simulation modeled a total of 10 seconds of run time. As is seen from Figure 1d, after 5.65 seconds the propellant front is nearing the drain pipe, especially near the center of the tank. Behind this pure propellant front is a mixed fluid of compromised quality that would require the test to end when it reaches the exit pipe. Such unsteady simulations provide an estimate of the time that a high-quality propellant supply to the test article can be guaranteed at the modeled mass flow rate. In the final paper, we will discuss simulations of the LOX and propellant tanks at NASA SSC being pressurized by an inert ullage. Detailed comparisons will be made between the CFD simulations and lower order models as well as with test data. Conditions leading to cryo collapse in the tank will also be identified.

Field, Robert E.↗

Investigating the origin of efficiency droop by profiling the temperature across the multi-quantum well of an operating light-emitting diode

Performance degradation resulting from efficiency droop during high-power operation is a critical problem in the development of high-efficiency light-emitting diodes (LEDs). In order to resolve the efficiency droop and increase the external quantum efficiency of LEDs, the droop's origin should be identified first. To experimentally investigate the cause of efficiency droop, we used null-point scanning thermal microscopy to quantitatively profile the temperature distribution on the cross section of the epi-layers of an operating GaN-based vertical LED with nanoscale spatial resolution at four different current densities. The movement of temperature peak towards the p-GaN side as the current density increases suggests that more heat is generated by leakage current than by Auger recombination. We therefore suspect that at higher current densities, current leakage becomes the dominant cause of the droop problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Emerging bosons with three-body interactions from spin-1 atoms in optical lattices

We study two many-body systems of bosons interacting via an infinite three-body contact repulsion in a lattice: a pairs quasicondensate induced by correlated hopping and the discrete version of the Pfaffian wave function. We propose to experimentally realize systems characterized by such interaction by means of a proper spin-1 lattice Hamiltonian: spin degrees of freedom are locally mapped into occupation numbers of emerging bosons, in a fashion similar to spin-1/2 and hardcore bosons. Such a system can be realized with ultracold spin-1 atoms in a Mott insulator with a filling factor of 1. The high versatility of these setups allows us to engineer spin-hopping operators breaking the SU(2) symmetry, as needed to approximate interesting bosonic Hamiltonians with three-body hardcore constraint. For this purpose we combine bichromatic spin-independent superlattices and Raman transitions to induce a different hopping rate for each spin orientation. Finally, we illustrate how our setup could be used to experimentally realize the first setup, that is, the transition to a pairs quasicondensed phase of the emerging bosons. We also report on a route toward the realization of a discrete bosonic Pfaffian wave function and list some open problems for reaching this goal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Parable of the Boiled Safety Professional

Common and unique issues contribute to system failures. This paper touches on the concept of drift to failure as a cautionary message. Managers and leaders, design team members, fabricators and assemblers, analysis and assurance personnel, and others associated with operating and maintaining systems, need to pay attention to identify the manifestation of individual and collective behaviors that might indicate slips in rigor or focus or decisions that might eat away at safety margins as our system drifts to failure. Corrections to drift made during design and development phases may efficiently prevent or mitigate drift problems occurring in the operational phase.

Shivers, Charles H.↗

Operator evolution via the similarity renormalization group: The deuteron

Similarity renormalization group (SRG) flow equations can be used to unitarily soften nuclear Hamiltonians by decoupling high-energy intermediate-state contributions to low-energy observables while maintaining the natural hierarchy of many-body forces. Analogous flow equations can be used to consistently evolve operators so that observables are unchanged if no approximations are made. The question in practice is whether the advantages of a softer Hamiltonian and less-correlated wave functions might be offset by complications in approximating and applying other operators. Here we examine the properties of SRG-evolved operators, focusing in this article on applications to the deuteron but leading toward methods for few-body systems. We find the advantageous features generally carry over to other operators with additional simplifications in some cases from factorization of the unitary transformation operator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coordination Between Sectors in Shared Airspace Operations

Recent studies have shown that a more efficient use of airspace may involve shared airspace operations, i.e., temporal as well as spatial separation of arrival and departure flows [1][2]. Temporal separation would permit a departure aircraft to fly through an arrival flow, depending on an available gap. This would necessitate careful and precise coordination between controllers in different sectors. Three methods of coordination which permit the penetration of a controller's airspace by another controller's aircraft are described: point out, look-and-go, and prearranged coordination procedure. Requirements of each method are given, along with associated problems that have surfaced in the field as described by Aviation Safety and Reporting System (ASRS) and other reports. A Human-in-the-Loop simulation was designed to compare two of the methods: point out and prearranged coordination procedures. In prearranged coordination procedures (P-ACP), the controllers control an aircraft in another controller's airspace according to specified prearranged procedures, without coordinating each individual aircraft with another controller, as is done with point outs. In the simulation, three experienced controllers rotated through two arrival sectors and a non-involved arrival sector of a Terminal Radar Approach Control (TRACON) airspace. Results of eighteen one-hour simulation runs (nine in each of the two conditions) showed no impact of the coordination method on separation violations nor on arrival times for 208 departing aircraft crossing an arrival stream. Participant assessment indicated that although both coordination conditions were acceptable, the prearranged coordination procedure condition was slightly safer, more efficient, timely, and overall, worked better operationally. Problems arose in the point out condition regarding controllers noticing acceptance of point outs. Also, in about half of the point-out runs, time pressure was felt to have had an impact on when and if the departures could cross an arrival stream. An additional problem with point outs may be confusion in the field about which controller has responsibility for separating point-out aircraft from other aircraft.

Parke, Bonny↗

Vibrations of Elastic Shells of Revolution Partially Filled with Ideal Liquid

We propose an algorithm for the numerical analyses of vibrations of elastic shells of revolution partially filled with ideal incompressible liquids. In the solution of this problem, the wave motions of liquid on its free surface are taken into account. The solution of the problem of hydroelasticity is based on the application of the method of decomposition of the domain of integration of equations of the theory of shells with the use of the variational statement of the problem and on the approximate construction of the operator inverse to the operator of the hydrodynamic part of the problem. We construct a generalized functional of displacements of the shell for which the role of conditions of matching for the solutions in different subdomains is played by the natural boundary conditions. The obtained numerical results are compared with the existing exact solutions of the analyzed problem for a shell in the form of a straight circular cylinder.

42 ENGINEERING↗