Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ni”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Implications of carbon content for the processing, stability, and mechanical properties of cast and wrought Ni-based superalloy Nimonic 105

As the temperature and pressure requirements in land-based turbines for power generation increase, the shift towards more advanced alloys, e.g., Ni-based superalloys, requires improved understanding of their long-term stability and mechanical properties. Additionally, the larger size of the components also presents fabrication and cost-reduction problems. In this study, we investigated Nimonic 105 as a potential rotor material at two carbon content levels – the commonly used maximum of the alloy specification and a lower carbon content variant. Reducing the carbon content presented fabrication challenges, resulting in surface crack formation during hot working. Additionally, a lower M 6 C carbide fraction was present after fabrication/solutioning, leading to a significantly larger grain size. After the standard aging treatment, similar γ' populations formed in the two variants, however the M 6 C carbides in the high-carbon variant already started transforming to intergranular M 23 C 6 . Although we did not observe a noticeable effect on the tensile properties of the two variants, the lower carbon content alloy possessed a superior creep property – mainly due to the larger grain size as the microstructural stability was inferior. Further, upon prolonged thermal exposure, the M 6 C carbides in the low-carbon variant further decomposed to intergranular and intragranular σ and μ precipitates, as opposed to mainly M 23 C 6 as in the high-carbon variant.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Partitioning of tramp elements Cu and Si in a Ni-based superalloy and their effect on creep properties

An alloy's processing history, including melting, remelting or the choice of stock material, affects its purity and eventually involves tramp element pickup or retention. Herein, variants of a novel Ni-based superalloy were manufactured with different levels of purity. The so-called low purity alloys contained 0.138 wt. % Cu and 0.019 wt. % Si while the Cu and Si levels were below x-ray fluorescence (XRF) detection limits of 0.003 and 0.010 wt. %, respectively, in the high purity ingots. Atom-probe tomography (APT) was carried out and revealed Si partitioning at the following interfaces: grain boundaries, MC carbide/γ, M 3 B 2 boride/$γ$ and M 3 B 2 boride/$γ$'. Copper was found to primarily segregate to the $γ$' precipitates. An average of 2.4 × decrease in creep life and 4.3 × decrease in creep ductility was measured in the low purity alloys, which was attributed to the embrittlement caused by Si segregation to grain boundaries. Furthermore, the positive effect of B on the creep properties was mitigated by the presence of Si. Thermodynamic predictions for the matrix and γ' precipitate compositions represented the trends observed experimentally although the extent of preferential partitioning lacks accuracy. Monte Carlo simulations were performed to describe the partitioning of Cu and Si atoms to either $γ$ or $γ$' phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reviving the rock-salt phases in Ni-rich layered cathodes by mechano-electrochemistry in all-solid-state batteries

The rock-salt phase (RSP) formed on the surface of Ni-rich layered cathodes in liquid-electrolyte lithium-ion batteries is conceived to be electrochemically "dead". Here we show massive RSP forms in the interior of LiNi x Mn y Co (1–x-y) O 2 (NMC) crystals in sulfide based all solid state batteries (ASSBs), but the RSP remains electrochemically active even after long cycles. The RSP and the layered structure constitute a two-phase mixture, a material architecture that is distinctly different from the RSP in liquid electrolytes. The tensioned layered phase affords an effective percolation channel into which lithium is squeezed out of the RSPs by compressive stress, rendering the RSPs electrochemically active. Consequently, the ASSBs with predominant RSP in the NMC cathode deliver remarkable long cycle life of 4000 cycles at high areal capacity of 4.3 mAh/cm 2 . Our study unveils distinct mechano-electrochemistry of RSPs in ASSBs that can be harnessed to enable high energy density and durable ASSBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Rational synthesis of high-performance Ni-rich layered oxide cathode enabled via probing solid-state lithiation evolution

Lithium (Li)-ion batteries using nickel (Ni)-rich layered oxide cathode have been pursued with interest due to high practical energy density. A fundamental understanding of the reaction pathways and structural evolution of the solid-phase synthesis of these materials is crucial for their rational design and process development for mass production. In this work, structural evolution during solid-state synthesis was traced via in situ technique, with a particular emphasis on the lithiation reaction and migration of transition metal (TM) ions. The sintering process is governed by the competitive relationship of decomposition and lithiation reactions, which can be regulated through temperature windows. Controlling the melting point of the Li sources, as well as their affinity to cathode precursors, is highly desired to maintain the layered ordering of TM ions throughout the whole synthesis process, which simplifies the manufacturing process and improves the quality of the manufactured cathode material.

25 ENERGY STORAGE↗
DOE OSTI2026

Abnormal grain growth driven by high-temperature proton irradiation in nanocrystalline Ni

In this research we examine a nanocrystalline Ni thin film exposed to high-temperature proton irradiation and compare it with as-deposited and annealed-only counterparts. Despite lacking thermal spikes typical of heavy ions, 400 °C proton irradiation drives pronounced grain growth in select grains, whereas annealing alone yields only modest coarsening. Grain-boundary statistics show fewer low-angle boundaries (10–20°) and more high-angle boundaries (55–60°), consistent with irradiation-enhanced mobility of high-misorientation boundaries. The irradiated films retain a random texture, with no evidence of texture development or sharpening. Mechanisms, such as radiation-enhanced grain boundary diffusion, beam-induced heating, and ion channeling-mediated selective grain growth, are unlikely to be the predominant drivers to explain the resultant microstructure. Instead, we suggest irradiation-induced modifications of grain-boundary structure, including possible complexion transitions, as one plausible explanation for this selective grain growth and retention of random texture. However, additional temperature–dose studies are required to confirm the mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interphasial engineering for Ni-rich NMC cathode materials

Ni-rich LiNi 1-x-y Mn x CoyO 2 , (NMC: 1-x-y ≥ 0.6) are promising cathode materials for lithium-ion batteries (LIBs) due to high reversible capacity and low cost. However, the fast capacity decay and voltage fading caused by interphasial instability requires improvement. The unstable cathodeelectrolyte interphase (CEI) and transition metal (TM) dissolution at higher voltages can lead to the drastic deterioration of electrochemical performance. In this review, recent approaches to novel electrolyte and additive design, cathode engineering including artificial CEI, and doping/coating on the surface of particles or the whole electrode are comprehensively summarized. In conclusion, the importance of multi-model and multi-scale characterization methods in understanding the effects of interphasial chemistry on battery performance is highlighted.

25 ENERGY STORAGE↗
DOE OSTI2023

Temperature-Dependent Morphological Evolution during Corrosion of the Ni-20Cr Alloy in Molten Salt Revealed by Multiscale Imaging

Understanding the mechanisms leading to the degradation of alloys in molten salts at elevated temperatures is significant for developing several key energy generation and storage technologies, including concentrated solar and next-generation nuclear power plants. Specifically, the fundamental mechanisms of different types of corrosion leading to various morphological evolution characteristics for changing reaction conditions between the molten salt and alloy remain unclear. Here, in this work, the three-dimensional (3D) morphological evolution of Ni–20Cr in KCl–MgCl 2 is studied at 600 °C by combining in situ synchrotron X-ray and electron microscopy techniques. By further comparing different morphology evolution characteristics in the temperature range of 500–800 °C, the relative rates between diffusion and reaction at the salt–metal interface lead to different morphological evolution pathways, including intergranular corrosion and percolation dealloying. In this work, the temperature-dependent mechanisms of the interactions between metals and molten salts are discussed, providing insights for predicting molten salt corrosion in real-world applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanistic Insights into the Electrochemical Oxidation of 5-Hydroxymethylfurfural on a Thin-Film Ni Anode

The electrochemical oxidation of alcohols is being explored as a favorable substitute for the oxygen evolution reaction owing to its capability to generate high-value products and lower overpotentials. Herein, we present a systematic investigation into the electrochemical oxidation of 5-hydroxymethylfurfural (HMF), a model biomass platform chemical, on a thin-film nickel catalyst, aiming to investigate the underlying reaction mechanism and shed light on the role of the catalyst’s microenvironment and phase on activity and product selectivity. Utilizing a combined experimental and computational approach, we demonstrate that NiOOH is the active phase for HMF oxidation. Additionally, we find a substantial impact of the electrochemical environment, particularly the electrolyte pH, on the reaction. Under highly alkaline conditions (pH = 13), higher activity for HMF oxidation is observed, accompanied by an increased selectivity toward 2,5-furandicarboxylic acid (FDCA) production. Conversely, a less alkaline environment (pH = 11) results in diminished HMF oxidation activity and a higher preference for the partial oxidation product 2,5-diformylfuran (DFF). Mechanistic insights from DFT studies reveal that geminal diols that are present under highly alkaline conditions undergo hydride transfer via HMFCA, while a shift to an alkoxide route occurs at a lower pH, favoring the DFF pathway. Hydride transfer energetics are also strongly affected by the surface Ni oxidation state. Finally, this integrated approach, bridging experimental and computational insights, provides a general framework for investigating the electrochemical oxidation of aldehydes and alcohols, thereby advancing rational design strategies in electrocatalysts for alcohol electro-oxidation reactions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Mesoporous 3D/2D NiCoP/g-C 3 N 4 Heterostructure with Dual Co–N and Ni–N Bonding States for Boosting Photocatalytic H 2 Production Activity and Stability

The mesoporous 3D/2D NiCoP/g-C 3 N 4 heterostructure is fabricated by embedding NiCoP nanoclusters on the surfaces of g-C 3 N 4 nanosheets, which exhibit more outstanding photocatalytic H 2 production activity than g-C 3 N 4 modified with Pt and other similar phosphides. The highest H 2 production rate over NiCoP/g-C 3 N 4 heterostructures reaches up to about 2.27 times than that of Pt/g-C 3 N 4 under visible light, and meanwhile, the NiCoP/g-C 3 N 4 heterostructure can maintain a continuously stable H 2 production rate during long cyclic running of 15 times in a total of 60 h. Here, the structure and properties investigations reveal that the splendid H 2 production activity and stability derive from the formed dual Co–N and Ni–N bonding states between 3D NiCoP nanoclusters and 2D g-C 3 N 4 nanosheets that can efficiently facilitate the transfer and separation of charge carriers and improve the interaction at heterointerfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr

The transport paths of O during intergranular oxidation in binary Ni-Cr were investigated. To isolate the selective oxidation of Cr, oxidation was performed with a CO/CO 2 gas mixture in which the oxygen partial pressure was kept under the NiO dissociation pressure. A combination of electron microscopy and atom probe tomography (APT) was used to study the nanometer-scale details of the passivation and penetrative intergranular oxidation processes at high-energy grain boundaries. Oxygen transport towards the terminating oxidation front is elucidated with dedicated usage of oxygen tracer exchange experiments. Secondary ion mass spectroscopy and APT support classical theories of internal oxidation, revealing preferred transport paths at the oxide/alloy interface with sub-nanometer resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film

Abstract High-resolution transmission electron microscopy and atom probe tomography are used to characterize the initial passivation and subsequent intergranular corrosion of degraded grain boundaries in a model Ni-30Cr alloy exposed to 360 °C hydrogenated water. Upon initial exposure for 1000 h, the alloy surface directly above the grain boundary forms a thin passivating film of Cr 2 O 3 , protecting the underlying grain boundary from intergranular corrosion. However, the metal grain boundary experiences severe Cr depletion and grain boundary migration during this initial exposure. To understand how Cr depletion affects further corrosion, the local protective film was sputtered away using a glancing angle focused ion beam. Upon further exposure, the surface fails to repassivate, and intergranular corrosion is observed through the Cr-depleted region. Through this combination of high-resolution microscopy and localized passive film removal, we show that, although high-Cr alloys are resistant to intergranular attack and stress corrosion cracking, degradation-induced changes in the underlying metal at grain boundaries make the material more susceptible once the initial passive film is breached.

(S)TEM↗
DOE OSTI2021

Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries

Reduction on cobalt reliance is an urgent requirement in the development of sustainable cathode materials for Li-ion batteries. Here the authors analyse the roles of cobalt and its interplay with other ions in high-nickel layered oxides, and deduce a material formula for promising cobalt-free cathodes. Current bottlenecks in cobalt (Co) supply have negatively impacted commercial battery production and inspired the development of cathode materials that are less reliant on Co. However, complete Co elimination is prevented by the lack of fundamental understanding of the impact of Co on cathode capacity and structural stability, as well as the lack of effective substitute components in practice. Here we investigate the roles of Co in purposely designed systems that include both Co-rich and Mn-substituted Co-free cathodes. Our results affirmed that Co plays an undeniable role in fast capacity and/or structural degradation, and found that Co is more destructive than Ni at high potentials, which offers unexpected but encouraging perspectives for Co reduction. Moreover, Mn substitution effectively alleviates the destructive effects of Co and enables a high potential functionality. Finally, with these fundamental discoveries, we demonstrated a series of LiNi α Mn β X γ O 2 (X = single or multiple dopants) as a promising candidate for Co-free cathodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Synthesis and Morphological Characterization of Electroless-Deposited Ni-P Coatings on Diamond Abrasives

Deposition of a coating on rough surfaces faces unique challenges due to the complexity of substrate morphology. In the present research, electroless deposition of a Ni-P coating was successfully deposited on diamond particles. Microtomography was conducted to study the deposition mechanisms. It revealed that the coating coverage rate on diamond particles was affected by the synergistic action of the deposition time, substrate morphology, and hypophosphite concentration. The best coverage was achieved in a solution with 0.2 mol/L hypophosphite. Two major morphological features of the coating: nodular and smooth, were influenced by the deposition parameters, coating integrity, and substrate morphology. The failure was seen in fractured and peeled off coatings. It was due to residual stress produced by the coalescing of crystallites during the deposition. This failure mechanism explains the tendency of coating fracture at three morphological features of the substrate. This work is beneficial to semiconductor manufacturing where effective cutting in chip fabrication is essential.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Twin nucleation and growth mechanism in Ni-based superalloys

While micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C, many aspects of twin nucleation and growth remain unexplored. Kolbe mechanism for micro-twinning, based on thermally activated reordering, is probably the only concept currently widely accepted by the scientific community. We propose a qualitatively different mechanism for nucleation and growth of twins. The mechanism can be briefly described as follows. Penetration of a gamma prime precipitate by two 1/2(110) edge dislocations travelling on adjacent {111} glide planes triggers nucleation (at the interface of the precipitate and the matrix) and emission of Shockley partial of screw character on the glide plane of the edge dislocation, which entered the precipitate first (generating trailing high-energy anti-phase boundary (APB)). Propagation of this Shockley partial into the precipitate converts the APB into super intrinsic stacking fault (SISF). The recurring arrival of additional edge dislocations on the glide planes adjacent to the configuration described above leads to formation of super extrinsic stacking fault SESF, subsequent micro-twin formation, and growth of the twinned region. We demonstrate the proposed mechanism via molecular dynamics simulations.

Ni-superalloys↗
NASA NTRSDate not supplied

Twin nucleation and growth mechanism in Ni-based superalloys

While micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C, many aspects of twin nucleation and growth remain unexplored. Kolbe mechanism for micro-twinning, based on thermally activated reordering, is probably the only concept currently widely accepted by the scientific community. We propose a qualitatively different mechanism for nucleation and growth of twins. The mechanism can be briefly described as follows. Penetration of a   precipitate by two 1/2(110) edge dislocations travelling on adjacent {111} glide planes triggers nucleation (at the interface of the precipitate and the matrix) and emission of Shockley partial of screw character on the glide plane of the edge dislocation, which entered the precipitate first (generating trailing high-energy anti-phase boundary (APB)). Propagation of this Shockley partial into the precipitate converts the APB into super intrinsic stacking fault (SISF). The recurring arrival of additional edge dislocations on the glide planes adjacent to the configuration described above leads to formation of super extrinsic stacking fault SESF, subsequent micro-twin formation, and growth of the twinned region. We demonstrate the proposed mechanism via molecular dynamics simulations.

Ni-based superalloys↗
NASA NTRSDate not supplied

Effect of Alloying Additions on Twinning in Ni-Based Superalloys

Micro-twinning is the dominant creep deformation mechanism in Ni-based superalloys at temperatures above 700 C. We use atomistic simulations to study two mechanisms of twin nucleation and growth that are characterized by qualitatively different rate limiting processes. In case of the mechanism proposed by Kolbe, the rate limiting process is diffusion-mediated atomic reshuffling. In case of the other mechanism, we proposed recently, the rate limiting process is nucleation of Shockley partial dislocation. We demonstrate the effects of alloying additions on functionality of these mechanisms.

Ni-based superalloys↗