Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanomaterial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Amorphization of Pseudocapacitive T−Nb 2 O 5 Accelerates Lithium Diffusivity as Revealed Using Tunable Isomorphic Architectures

Abstract Intercalation pseudocapacitance can combine capacitor‐like power densities with battery‐like energy densities. Such surface‐limited behavior requires rapid diffusion where amorphization can increase solid‐state diffusivity. Here intercalation pseudocapacitive materials with tailored extents of amorphization in T‐Nb 2 O 5 are first reported. Amorphization was characterized with WAXS, XPS, XAFS, and EPR which suggested a peroxide‐rich (O 2 2− ) surface that was consistent with DFT predictions. A series of tunable isomorphic architectures enabled comparisons while independently varying transport parameters. Through process of elimination, solid‐state lithium diffusion was identified as the dominant diffusive‐constraint dictating the maximum voltage sweep rate for surface‐limited kinetics ( v SLT ), termed the Surface‐Limited Threshold (SLT). The v SLT increased with amorphization however stable cycling required crystalline T‐Nb 2 O 5 . A current‐response model using series‐impedances well‐matched these observations. This perspective revealed that amorphization of T‐Nb 2 O 5 enhanced solid‐state diffusion by 12.2 % and increased surface‐limitations by 17.0 % (stable samples). This approach enabled retaining 95 % lithiation capacity at ∼800 mV s −1 (1,600 C‐rate equivalent).

25 ENERGY STORAGE↗
DOE OSTI2026

Influence of Air and Ethanol Dehydration on Structure, Behavior, and Function of Type I Collagen Scaffolds

Ethanol dehydration is a common step in both scaffold manufacturing and tissue processing, yet the influence of ethanol on collagen is not well understood. This study examined the effects of dehydration, via ethanol treatment and air drying, on collagen structure, behavior, mechanics, and rehydration capacity. Multiple material characterization methods were used including Fourier Transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy, thermogravimetric analysis, small/medium angle x‐ray scattering, volumetric swelling analysis, and tensile testing. Ethanol dehydration removed bulk water from scaffolds, making them stronger and stiffer, but also showed loss of molecular water. This molecular water appears to act as a collagen stabilizer, resulting in less thermally stable scaffolds. The loss of molecular water is also evident in the molecular d‐spacing. Secondary structure of scaffolds was also altered by ethanol, resulting in significantly enhanced rehydration capacity. Bulk water, both before and after rehydration, largely determined mechanical properties, which did not correlate with other structural measures such as FTIR. While rehydration largely returned collagen spacing to pre‐ethanol treated state, structural alterations seen in FTIR cannot be recovered. These results have implications for not only collagen scaffolds, but in many tissue engineering and processing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Hydrothermal synthesis of chiral carbon dots

Abstract Nanocolloids that are cumulatively referred to as nanocarbons, attracted significant attention during the last decade because of facile synthesis methods, water solubility, tunable photoluminescence, easy surface modification, and high biocompatibility. Among the latest development in this reserach area are chiral nanocarbons exemplified by chiral carbon dots (CDots). They are expected to have applications in sensing, catalysis, imaging, and nanomedicine. However, the current methods of CDots synthesis show often contradictory chemical/optical properties and structural information that required a systematic study with careful structural evaluation. Here, we investigate and optimize chiroptical activity and photoluminescence of L‐ and D‐ CDots obtained by hydrothermal carbonization of L‐ and D‐ cysteine, respectively. Nuclear magnetic resonance spectroscopy demonstrates that they are formed via gradual dehydrogenation and condensation reactions of the starting amino acid leading to particles with a wide spectrum of functional groups including aromatic cycles. We found that the chiroptical activity of CDots has an inverse correlation with the synthesis duration and temperature, whereas the photoluminescence intensity has a direct one, which is associated with degree of carbonization. Also, our studies show that the hydrothermal synthesis of cysteine in the presence of boric acid leads to the formation of CDots rather than boron nitride nanoparticles as was previously proposed in several reports. These results can be used to design chiral carbon‐based nanoparticles with optimal chemical, chiroptical, and photoluminescent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid In Situ Ligand‐Exchange Process Used to Prepare 3D PbSe Nanocrystal Superlattice Infrared Photodetectors

Abstract Colloidal semiconductor nanocrystals are important building blocks for low‐cost, solution‐processed electronic devices with tunable functionalities. Considerable progress is made in improving charge transport through nanocrystal films by exchanging long insulating ligands with shorter passivating ligands. To take full advantage of this strategy, it is equally important to fabricate close‐packed structures that reduce the average interparticle spacing. Yet it remains a challenge to retain long‐range, close‐packed order after ligand exchange. Here, a novel one‐step in situ ligand‐exchange method is demonstrated that enables rapid (5 min) ligand exchange of nanocrystal films, which are more than 50 layers thick. Using this simple and efficient method, it is shown that the face‐centered cubic ordering of 500 nm thick PbSe nanocrystal films is retained after ligand exchange from oleic acid to benzoic acid. Moreover, it is demonstrated that PbSe nanocrystal photodetectors with a well‐ordered structure have superior optoelectronic properties compared to disordered films; ordered films have a 16× higher responsivity of ≈0.25 A W −1 at 1 V and a 2× faster response time. As far as it is known, this is the first report to realize a rapid one‐step ligand exchange through a thick superlattice film with retention of long‐range order.

infrared detecton↗
DOE OSTI2025

Monolayer TiS 2 Nanosheets on Au(111)–Structural Characterization and Effect of Edge Stability for Shape Control

Transition metal dichalcogenides are promising alternatives to noble metal catalysts, e.g., for (photo-)activation of greenhouse gases or hydrogenations. Herein, a direct synthetic route for 2D TiS 2 nanosheets on Au(111) by titanium deposition in the presence of a mild, organic, non-oxidizing sulfur source is presented. High-resolution scanning tunneling microscopy (STM) is used to gain atomic-level insights into the TiS 2 nanosheet morphology. In contrast to the literature, this protocol gains mostly hexagonal and truncated triangular nanosheets with an increased edge contrast in STM, analog to metallic edge states in MoS 2 . Synchrotron-based photoelectron spectroscopy allows insights into compositional details, specifically to distinguish different S sites on the TiS 2 sheets and other S species on the sample. Further, a minimum size is identified (9 S atoms side length), which underlines the importance of moiré reconstructions for stress relief. The TiS 2 sheets coexist with [Au]Ti 1 S 3 clusters, in which a single gold atom is alloyed into the surface and capped by three S atoms. Together with the finding of a critical sheet size, this points toward on-surface Ostwald ripening as a relevant process in the sheet formation. Ab-initio calculations (density functional theory) underscore that the chemical potential of S is an essential descriptor to maintain shape control.

2D nanomaterials↗
DOE OSTI2025

SnSe 1-x S x Alloys: Anisotropic Van der Waals Semiconductors with Tunable Bandgaps

Alloying is one of the main tools of bandgap engineering, allowing the tuning of crystal structure, lattice parameters, and electronic structure of 3D and 2D/layered semiconductors. Among the latter, it can play a key role in tailoring the properties of tin monochalcogenides, a class of van der Waals semiconductors of interest for optoelectronics, thermoelectrics, ferroelectrics, and valleytronics. Here, the study investigates the synthesis and properties of large flakes of the anion substitution alloys SnSe 1-x S x . Alloy flakes across a wide range of compositions are obtained systematically by repeated growth from the same mixed (SnS, SnSe) powder precursor. Combined experiment and theory show full miscibility for all compositions, along with tunable lattice constants, bandgaps, and vibrational modes. Atomic resolution imaging demonstrates the accumulation of S and Se in alternating layers in the SnSe 1-x S x unit cell, attributed to growth kinetics. Polarized Raman spectroscopy confirms anisotropic vibrational modes; the calculated and measured band structure shows systematic changes in the band edge energies and anisotropic electronic structure due to the anisotropic in-plane lattice of the monochalcogenides. Cathodoluminescence, finally, indicates that a unique configuration of two non-degenerate, direct valleys along orthogonal k-space directions persists all the way from SnS to SnSe, making SnSe 1-x S x alloys interesting for valleytronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photocatalytic Nitrate Destruction Studies in Complex Environments

One method for denitration of nitric acid used in nuclear facilities is to use formic acid as a reductant. The major problem with formic acid denitration is an induction period of varying duration that may result in excessive accumulation of formic acid at the reaction onset. This accumulation poses an off-gas process control issue. In this talk, we will describe the use of titaniabased photocatalysts for the treatment of nitric acid and nitrate wastes. We find that the photocatalytic process is a simple and straightforward method to completely destroy nitrate ions at room temperature without any initiation period.

nanomaterials↗
DOE OSTI2021

Thermodynamic stabilization of nanocrystalline aluminum

Nanocrystalline metals are generally unstable due to a large volume fraction of high-energy grain boundaries associated with a small grain size. Preferential dopant segregation to the high-energy grain boundaries is observed to enhance the stability of the material’s microstructure by minimizing its energy. Nanocrystalline aluminum-dopant systems were evaluated for thermodynamic stability against grain growth and phase precipitation via the mechanism of grain boundary segregation according to a modified regular nanocrystalline solution model. Fifty-one potential dopant elements have been evaluated for their efficacy in stabilizing nanostructures with three potential candidates, magnesium, lanthanum, and silicon, identified possessing the characteristics to promote grain boundary segregation and a state of thermodynamic stability in aluminum’s nanocrystalline regime. Here, the minimum dopant content required to achieve nanocrystalline microstructure stability is identified for each of the three candidate elements. Beyond this minimum content, further addition of the dopant elements decreased the final microstructure’s stability with no effects on the existence of a stable nanocrystalline state.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural metamaterials with innate capacitive and resistive sensing

Interpenetrating lattices consist of two or more interwoven but physically separate sub-lattices with unique behaviors derived from their multi-body construction. If the sublattices are constructed or coated with an electrically conducting material, the close proximity and high surface area of the electrically isolated conductors allow the two lattices to interact electromagnetically either across the initial dielectric filled gap or through physical contact. Furthermore, changes in the size of the dielectric gap between the sub-lattices induced by deformation can be measured via capacitance or resistance, allowing a structurally competent lattice to operate as a force or deformation sensor. In addition to resistive and capacitive deformation sensing, this work explores capacitance as a fundamental metamaterial property and the environmental sensing behaviors of interpenetrating lattices.

Computational Solid Mechanics↗
DOE OSTI2025

Polymer-assisted deposition of nanoparticle feedstocks for target fabrication

Traditional polymer-assisted deposition has been shown to produce highly uniform thin films of metal oxides, including actinide oxides. Furthermore, while producing thicker films for nuclear targets is possible through repeated coating application, we exchanged the dissolved metal species with nanoparticles to maximize the thickness that can be achieved with an individual layer. Using CeO 2 nanoparticles in a polyethyleneimine matrix, we produced targets with single-layer areal densities of 0.22 ± 0.01 mg·cm −2 (1σ) and thicknesses of 690 ± 80 nm (1σ). A custom 3D-printed spin coating chuck attachment with an inlay improved target homogeneity and will streamline future work with radioactive materials.

and nuclear chemistry↗
DOE OSTI2020

3D printing of metal-based materials for renewable energy applications

Large-scale renewable energy must overcome conversion and storage challenges before it can replace fossil fuels due to its intermittent nature. However, current sustainable energy devices still suffer from high cost, low efficiency, and poor service life problems. Recently, porous metal-based materials have been widely used as desirable cross-functional platforms for electrochemical and photochemical energy systems for their unique electrical conductivity, catalytic activity, and chemical stability. To tailor the porosity length scale, ordering, and compositions, 3D printing has been applied as a disruptive manufacturing revolution to create complex architected components by directly joining sequential layers into designed structures. In conclusion, this article intends to summarize cutting-edge advances of metal-based materials for renewable energy devices (e.g., fuel cells, solar cells, supercapacitors, and batteries) over the past decade.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Directional Assembly of Nanoparticles by DNA Shapes: Towards Designed Architectures and Functionality

In bottom–up self-assembly, DNA nanotechnology plays a vital role in the development of novel materials and promises to revolutionize nanoscale manufacturing technologies. DNA shapes exhibit many versatile characteristics, such as their addressability and programmability, which can be used for determining the organization of nanoparticles. Furthermore, the precise design of DNA tiles and origami provides a promising technique to synthesize various complex desired architectures. These nanoparticle-based structures with targeted organizations open the possibility to specific applications in sensing, optics, catalysis, among others. In this work, we review progress in the development and design of DNA shapes for the self-assembly of nanoparticles and discuss the broad range of applications for these architectures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

A dual promotional effect of doping tantalum (Ta) in atomically dispersed Ru/CeO 2 catalyst toward CO 2 methanation: Enhanced associative adsorption of CO 2 and activation of H 2

Precisely controlling the product selectivity in CO 2 hydrogenation through rational catalyst design presents a promising approach to mitigate environmental and energy-related challenges, though it remains a significant scientific hurdle. Herein, the CH 4 selectivity of 0.5 wt% Ru loaded catalysts at 250 °C was effectively shifted from approximately 35 % to 100 % through the incorporation of Ta dopant into the CeO 2 support. The EXAFS spectra in conjunction with CO DRIFTS experiment indicated the presence of atomically dispersed Ru particles anchored on the Ta-doped CeO 2 surface. A higher oxidized CeO 2 surface was evidenced in the presence of Ta dopant. The presence of Ta dopant also improved the dispersion of Ru species and their interaction with the support. Most importantly, the Ru/Ta-CeO 2 catalyst exhibited a pronounced capacity for associative CO 2 -adsorption under atmospheric pressure at 50 °C. An improved H 2 activation was also observed under CO 2 hydrogenation conditions. This novel finding of the dual promotional effect of Ta carries a significant impact in the field of CO 2 capture and utilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of grafting density on the two-dimensional assembly of nanoparticles

Employing grazing-incidence small-angle X-ray scattering (GISAXS) and X-ray reflectivity (XRR), we demonstrate that films composed of polyethylene glycol (PEG)-grafted silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), as well as their binary mixtures, form highly stable hexagonal structures at the vapor–liquid interface. These nanoparticles exhibit remarkable stability under varying environmental conditions, including changes in pH, mixing concentration, and PEG chain length. Short-chain PEG grafting produces dense, well-ordered films, while longer chains produce more complex, less dense quasi-bilayer structures. AuNPs exhibit higher grafting densities than AgNPs, leading to more ordered in-plane arrangements. In binary mixtures, AuNPs dominate the population at the surface, while AgNPs integrate into the system, expanding the lattice without forming a distinct binary superstructure. In conclusion, these results offer valuable insights into the structural behavior of PEG-grafted nanoparticles and provide a foundation for optimizing binary nanoparticle assemblies for advanced nanotechnology applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Activity and selectivity for CO 2 methanation of clusters and nanoplates of ruthenium dispersed on ceria: In-situ studies with XAFS and DRIFTS

The performance of Ru/CeO 2 catalysts under CO 2 hydrogenation conditions was studied using in situ X-ray absorption fine structure (XAFS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) to understand the structural evolution and chemical nature of each component under reaction conditions. The catalysts were prepared using a reverse microemulsion method that maximized the dispersion of RuOx particles on ceria. A RuO x → Ru transformation was observed upon exposure of the RuO x /CeO 2 systems to H 2 at 250 °C. For a sample with 5% molar Ru, two-dimensional clusters (2-4 atoms) of Ru formed on top of the ceria support. An increase in the loading of ruthenium to 20% molar led to the formation of nanoplates of the metal 2-3 atomic layers thick. Both Ru structures were highly dispersed on ceria. They were oxidized after exposure to CO 2 at 250 °C. However, under CO 2 /H 2 mixture, they remained in a metallic state as two-dimensional clusters and nanoplates. In situ DRIFTS studies, the 5% and 20% Ru/CeO 2 catalysts showed distinct reaction intermediates when exposed to CO 2 or CO 2 /H 2 (1/4) reaction mixtures. Normalized to the Ru molar percentage, the 5% Ru/CeO 2 system was the most active catalyst exhibiting a selectivity of ~ 60% CH 4 and 40% CO at 250 °C. On the other hand, under the same reaction conditions, the 20% Ru/CeO 2 system was less active but had a CH 4 selectivity close to 80%. In conclusion, these results highlight the importance of the structure of the metallic Ru particles as a factor that determines the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Towards improved conversion of wet waste to jet fuel with atomic layer deposition-coated hydrodeoxygenation catalysts

The conversion of wet waste-derived volatile fatty acids into jet fuel-range hydrocarbons is a promising route for increasing the production of sustainable aviation fuel; however, the cost and moderate alkane selectivity of Pt-based hydrodeoxygenation catalysts present challenges for commercialization. Here, to address this, we used atomic layer deposition to apply TiO 2 overcoats to Pt/Al 2 O 3 catalysts and create new interface sites that exhibited 8 times higher site time yield of the desirable n-alkane product than uncoated catalyst. Through TPR/TPD, XPS, CO DRIFTS, and DFT calculations, we found that the increased selectivity of the ALD-coated catalyst was due to the creation of O vacancies at the Pt-TiO 2 interface under reducing conditions, resulting in new Ti 3+ acid sites near the active metal. Maximum conversion and alkane selectivity during HDO was achieved with an ALD-coated 0.5% wt Pt catalyst, indicating that TiO 2 ALD can be used to maximize the utility of precious-metal catalysts.

09 BIOMASS FUELS↗
DOE OSTI2024

Development of ceria-supported metal-oxide (MO x /CeO 2 ) catalysts via a one-pot chemical vapor deposition (OP-CVD) technique: Structure and reverse water gas shift reaction study

Current synthesis techniques for metal oxide (MO x )-supported catalysts have certain limitations of undesired target loading, ineffective dispersion of active species over the surface, uncontrolled particle size of active species, and complicated synthesis steps. Here, we developed a one-pot chemical vapor deposition (OP-CVD) methodology; by using which a solid metal precursor forms a vapor in a controlled condition and gets supported over the surrounding matrix. The theoretical stability followed by experimental validation using TGA is crucial for selecting the metal precursors. Three simple steps viz. premixing, dispersion, and rapid fixation by calcination are involved in the catalyst development via the OP-CVD approach. This study solely focused on the synthesis of 3d transition MO x over ceria support. The physicochemical characterizations of the prepared catalysts were performed by XRD, ICP-OES, SEM-EDX, CO pulse chemisorption, XANES, and EXAFS analyses to understand the crystal structure of involved species, target metal loading, dispersion, and particle size and prove the feasibility and viability of OP-CVD. The prepared catalysts were further tested for reverse water gas shift (RWGS) reaction to link their structural information with activity. The RWGS reaction data showed that the CO activity and CO selectivity were metal - and metal precursor-dependent. Higher CO activity of > 0.1 mol/h g-cat was observed for Cu and Co-based catalysts, with CO selectivity of ~100 %. This study provides an opportunity to produce efficient supported catalysts in a convenient way, providing effective catalytic activity.

36 MATERIALS SCIENCE↗