Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Investigation of Coal-biomass Catalytic Gasification using Experiments, Reaction Kinetics and Computational Fluid Dynamics

A collaborative effort involving experiments, kinetic modeling, and computational fluid dynamics (CFD) was used to understand co-gasification of coal-biomass mixtures. The overall goal of the work was to determine the key reactive properties for coal-biomass mixed fuels. Sub-bituminous coal was mixed with biomass feedstocks to determine the fluidization and gasification characteristics of hybrid poplar wood, switchgrass and corn stover. It was found that corn stover and poplar wood were the best feedstocks to use with coal. The novel approach of this project was the use of a red mud catalyst to improve gasification and lower gasification temperatures. An important results was the reduction of agglomeration of the biomass using the catalyst. An outcome of this work was the characterization of the chemical kinetics and reaction mechanisms of the co-gasification fuels, and the development of a set of models that can be integrated into other modeling environments. The multiphase flow code, MFIX, was used to simulate and predict the hydrodynamics and co-gasification, and results were validated with the experiments. The reaction kinetics modeling was used to develop a smaller set of reactions for tractable CFD calculations that represented the experiments. Finally, an efficient tool was developed, MCHARS, and coupled with MFIX to efficiently simulate the complex reaction kinetics.

09 BIOMASS FUELS↗

Measurement of critical energy for direct initiation of spherical detonations in stoichiometric high-pressure H{sub 2}-O{sub 2} mixtures

In this study, the critical energy for direct initiation of spherical detonations in stoichiometric high-pressure hydrogen-oxygen mixtures are measured and investigated to look at the effect of explosion limits on the detonation sensitivity. Results up to an initial pressure of 20 atm are obtained. Experiments are carried out in a spherical bomb and direct initiation is achieved via spark ignition from a high-voltage capacitor discharge. A detailed description of different methods to obtain a good estimate of the correct amount of energy deposited into the mixture used to initiate the detonation, including the calorimeter method and current method, is provided. It is demonstrated that at elevated initial pressure, the second explosion limit effect plays a significant role leading to slow-branching reactions and the detonation sensitivity of hydrogen mixtures is comparable to other common hydrocarbon mixtures at such condition. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of large-particle-size monodisperse latexes in space

Results are reported of latex sphere polymerization experiments performed on two flights of the Columbia and three flights of the Challenger. The trials were carried out because polymerization of the spheres in space avoids coagulation, nucleation of a new crop of particles, and excessive stirring requirements, and allows growth of spheres larger than 4 microns diam. The Monodisperse Latex Reactor (MLR) held four stirred 100 cc sealed stainless steel cylindrical containers. The mixtures were monitored for the conversion times, volume decreases as spheres formed and the mixture temperature. The spheres were grown from 0.19 micron seeds. Details of the flight preparation efforts are outlined. In flights which did not experience mechanical malfunctions spheres 3-30 microns diam were grown that had noticeably lower size variations than did the ground-based control particles. The 10 micron diam spheres grown on STS-6 were accepted as standard reference material by the NBS and became the first products made in space to be commercially sold on earth; the 30 micron spheres also became NBS standards. The experiments confirmed all projected benefits of producing the spheres in space, as well as provided the opportunity to grow more larger offsize spheres by finishing the growths on earth.

Vanderhoff, J. W.↗

Autoignition of n-decane at high pressure

The ignition of n-decane in air has been studied experimentally at temperatures between 800 and 1300 K and at pressures up to 80 atm. The experiments have been carried out in a preheated shock tube. Ignition delay times of stoichiometric and lean mixtures of n-decane and air have been measured behind reflected shock waves. The experimental data have been compared with four kinetic mechanisms. Differences between the experimental data and the modeling results are discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition of the molecular precursor Bu{sub 4}Sn{sub 6}S{sub 6} on the surface of TiO{sub 2} to prepare semiconductor composite photocatalysts

In this work, the single source organometallic precursor Bu{sub 4}Sn{sub 6}S{sub 6} was impregnated and decomposed on the surface of TiO{sub 2} to produce semiconductor composites. {sup 119}Sn Moessbauer, Raman and ultra violet/visible spectroscopies, powder X-ray diffraction, temperature programmed reduction and surface area suggest for Sn contents of 1, 5 and 10 wt%, the formation of a highly dispersed unstable SnS phase which is readily oxidized by air at room temperature to form SnO{sub 2} on the TiO{sub 2} surface. The composite with Sn 30 wt% produced a mixture with the phases SnS/{gamma}-Sn{sub 2}S{sub 3} and SnO{sub 2}. Photocatalytic experiments with the composites SnX{sub n}/TiO{sub 2} using the textile dye Drimaren red as a probe molecule showed a first-order reaction with rate constants k{sub absorbance} for the composites with Sn 1 and 5% higher than pure TiO{sub 2} which was explained by the formation of the more active photocatalyst composite SnO{sub 2}/TiO{sub 2}.

36 MATERIALS SCIENCE↗

Probing the antagonistic effect of toluene as a component in surrogate fuel models at low temperatures and high pressures. A case study of toluene/dimethyl ether mixtures

There is a dearth of experimental data which examine the fundamental low-temperature ignition (T < 900 K) behavior of toluene resulting in a lack of data for the construction, validation, and interpretation of chemical kinetic models for commercial fuels. In order to gain a better understanding of its combustion chemistry, dimethyl ether (DME) has been used as a radical initiator to induce ignition in this highly knock resistant aromatic, and its influence on the combustion of toluene ignition was studied in both shock tube and rapid compression machines as a function of temperature (624–1459 K), pressure (20–40 atm), equivalence ratio (0.5–2.0), and blending ratio (100% toluene, 76% toluene (76T/24D), 58% toluene (58T/42D), 26% toluene (26T/74D) and 100% DME). We use several literature chemical kinetic models to interpret our experimental results. For mixtures containing high concentrations of toluene at low-temperatures none of these are capable of reproducing experiment. This then implies an incomplete understanding of the low-temperature oxidation pathways which control its ignition in our experimental reactors, and by extension, in spark- (SI) and compression-ignition (CI) engines, and an updated detailed chemical kinetic model is presented for engineering applications. Model analyses indicate that although the initial fate of the fuel is dominated by single-step H-atom abstraction reactions from both the benzylic and phenylic sites, the subsequent fate of the allylic and vinylic radicals formed is much more complex. Further experimental and theoretical endeavors are required to gain a holistic qualitative and quantitative chemical kinetics based understanding of the combustion of pure toluene, toluene blends, and commercial fuels containing other aromatic components, at temperatures of relevance to SI and CI engines.

30 DIRECT ENERGY CONVERSION↗

Surface properties, crystallinity and optical properties of anodised titanium in mixture of β-glycerophosphate (β-GP) and calcium acetate (CA)

Anodic oxidation is an electrochemical method for the production of ceramic films on a metallic substrate. It had been widely used to deposit the ceramic coatings on the metals surface. This method has been widely used in surface modification of biomaterials especially for dental implants. In this study, the surface morphology, crystallinity and optical properties of titanium foil was modified by anodising in mixture of β-glycerophosphate disodium salt pentahydrate (β-GP) and calcium acetate monohydrate (CA). The experiments were carried out at high voltage (350 V), different anodising time (5 and 10 minutes) and current density (10-70 mA.cm{sup −2}) at room temperature. Anodised titanium was characterised by using field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), and UV-Vis spectrometry. The result of the experiment showed that surface morphology, crystallinity and optical properties depended strongly on the current density and anodising time. More porous surface and large amount of anatase and rutile was produced at higher current density and longer anodising time. Apart from that, it is also revealed that the energy band gap of anodised titanium increases as the increase in current density due to the presence of anatase and rutile TiO{sub 2}.

36 MATERIALS SCIENCE↗

Measuring molecular parity nonconservation using nuclear-magnetic-resonance spectroscopy

Here, the weak interaction does not conserve parity and therefore induces energy shifts in chiral enantiomers that should in principle be detectable in molecular spectra. Unfortunately, the magnitude of the expected shifts are small and in spectra of a mixture of enantiomers, the energy shifts are not resolvable. We propose a nuclear-magnetic-resonance (NMR) experiment in which we titrate the chirality (enantiomeric excess) of a solvent and measure the diasteriomeric splitting in the spectra of a chiral solute in order to search for an anomalous offset due to parity nonconservation (PNC). We present a proof-of-principle experiment in which we search for PNC in the 13 C resonances of small molecules, and use the 1 H resonances, which are insensitive to PNC, as an internal reference. We set a constraint on molecular PNC in 13 C chemical shifts at a level of 10 –5 ppm, and provide a discussion of important considerations in the search for molecular PNC using NMR spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗

The anaerobic fungus Neocallimastix californiae shifts metabolism and produces melanin in response to lignin-derived aromatic compounds

Biological deconstruction of lignocellulose for sustainable chemical production offers an opportunity to harness evolutionarily specialized enzymes and organisms for industrial bioprocessing. While hydrolysis of cellulose and hemicellulose by CAZymes yields fermentable sugars, ligninolysis releases a heterogeneous mix of aromatic compounds that likely play a crucial role in shaping microbial communities and microbial metabolism. Here, we interrogated the metabolomic and transcriptomic response of a lignocellulolytic anaerobic fungus, Neocallimastix californiae, to a heterogeneous mixture of aromatic compounds derived from lignin. Through exposing the fungus to both a concentration it might experience in its native environment and an elevated concentration of alkaline lignin, we observe that N. californiae transforms vanillin and that supplying alkaline lignin at 0.125 g/L, alongside cellulose, enhances the growth and polysaccharide-degrading activity of N. californiae. Altogether, our results further suggest that vanillin consumption, increased polymer-degrading activity, increased metabolic activity, and transcriptomic remodeling of amino acid synthesis genes all coincide with increased melanin production by fungal cells. These observations challenge previous notions that aromatics from lignocellulose only inhibit the growth and polymer deconstruction capabilities of the biomass-degrading anaerobic fungi (Neocallimastigomycetes). This study demonstrates that anaerobic fungi have a complex relationship with aromatic chemicals derived from lignin and hemicellulose and shift their metabolism in response to the addition of lignocellulose-derived aromatics to their growth medium. Further, as no known pathways for the biochemical transformation of aromatics were detected in these organisms despite observed transcriptome remodeling in the presence of aromatics, we suggest they might encode novel biochemical routes for scavenging amino acid building blocks from aromatic monomers derived from hemicellulose side chains and lignin.

Anaerobic fungi↗

Cassio Simulations of X-ray Flow Over Lumps (XFOL) Experiments [Slides]

Homogeneous media is not a good approximation for stochastic media with large clump sizes and therefore not valid for our experiments. The media created for these experiments is not Markovian distributed. Stochastic media transport methods don’t work well with non-Markovian mixtures. Sphere at various axial locations in the dmain encounter very different radflow characteristics and therefore result in different spectroscopic signatures. Ongoing analysis of tally surfaces will allow for better characterization of the radiation flow in radiation hydrodynamics simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mixed Precursor and Future Climate in the Southeast U.S. Field Campaign Report

The generation of atmospheric aerosols is a fundamental process in aerosol-climate interactions, where particles act as nuclei for cloud formation and ultimately influence Earth’s radiative balance. Understanding aerosol precursors, chemical compositions, and formation mechanisms, particularly for secondary organic aerosols (SOAs), is essential for assessing their overall impact on climate. Aerosol-climate interactions are especially important in the Southeastern United States (SE-US), where the atmosphere is strongly influenced by both biogenic and anthropogenic emissions, as well as intense land-atmosphere convective coupling. Current mechanistic representations of SOA formation under ambient conditions are largely extrapolated from laboratory-scale oxidation experiments involving individual volatile organic compounds (VOCs), which are often assumed to behave independently when present in mixtures. However, recent empirical evidence demonstrates that coexisting VOC precursors can undergo previously unexplored molecular-scale interactions that significantly alter SOA physicochemical properties, including mass loading, yield, and water uptake.

54 ENVIRONMENTAL SCIENCES↗

Nuclear Test Scenarios for Discussion of On-Site Inspection Technologies

The purpose of the ISS OSI Invited Meeting being held in Vienna March 24-27, 2009 is to obtain a better understanding of the phenomenology of underground nuclear explosions for On-Site Inspection (OSI) purposes. In order to focus the technology discussions, we have developed two very general scenarios, or models, of underground nuclear test configurations and phenomena that will help us explore the application of OSI methodologies and techniques. The scenarios describe testing environments, operations, logistics, equipment, and facilities that might be used in conducting an underground nuclear test. One scenario involves emplacement of a nuclear device into a vertical borehole in an area with relatively flat terrain; the other involves emplacement within a tunnel (horizontally) in an area with mountainous terrain. Vertical borehole geometry The example for this scenario is an intermediate yield nuclear explosion carried out in a flat desert area. The ground was cleared and smoothed over a 200 X 200 m fenced area for operational support activities, access to the borehole, and in order to place a few structures to house diagnostics equipment and control functions. Power lines were provided for local electrical power. The vertical emplacement borehole was 2 m in diameter and bored to a depth of 350 m. The emplacement hole was lined with steel pipe in order to keep the hole open and to avoid cave-ins during emplacement of the nuclear device. Emplacement was above the local water table, and the top of the saturation zone is about 30 m below the bottom of the emplacement hole. The detonation point was at a depth of 340 m. All of the rock material removed while drilling the borehole was removed to another place. Diagnostics and control for the test were relatively simple: about 2 dozen high capacity coaxial cables feed from the down hole instruments to the surface and then about 100 m laterally to a diagnostics trailer. Two strong steel cables were used to emplace the device and diagnostic instruments and to support the down hole cables. The borehole was stemmed after the device was emplaced. The stemming material was relatively simple: the hole was backfilled with sand or gravel about 20-30 m above the nuclear experiment package, a grouted plug about 3 m thick is added, and the hole backfilled with a mixture of sand and gravel to the surface. After the test, the testing party removed all structures and power lines and covered the top of the borehole with a small building. Geologic environment before the test--The geology for the test consists of flat-lying alluvium and tuff, with 50 m of poorly consolidated alluvium near the surface and moderately welded tuff from 50 m depth to 50 m below the bottom of the hole. The upper tuff is underlain by a densely welded tuff unit, with basement Paleozoic sedimentary rock beginning at a depth of about 1000 m. The tuff is intact with a few fractures. There are no known faults located within 500 m of the borehole. Alteration of the underground environment--The blast created a spherical or near spherical cavity with a lens of vitrified material at the bottom. There are several zones surrounding the detonation point with decreasing levels of rock damage. The zones are: (1) the crushed zone (several tens of meters)where the rock has lost all prior integrity; (2) the fractured zone (out to a couple of hundred meters) characterized by radial and concentric fissures; and (3) the zone of irreversible strain (out to a couple of thousand meters) with local media deformation. A collapse chimney formed one hour after the detonation, in which overlying material fell into the explosion cavity. This chimney zone reached up to within 50 m of the surface and a small apical void formed (10 m high and 80 m in diameter) at the top of the rubble chimney. The rubble chimney is dry and density is about 20% less than the surrounding intact rock. Alteration at the surface--No surface depression formed, but there is significant 'fluffing' of the surface soil from the effects of the initial shock wave. A few radial and concentric fractures formed from the shock effects within a radius of 200 m of the borehole. Radionuclide environment--No particulates or aerosol radiological material reached the surface. However, the stemming is not completely impervious to gas release and a small amount of gas and vapor was released along the emplacement pipe immediately after the explosion and before the rubble chimney formed. Most of the gas venting stopped as soon as cavity collapse occurred. After the rubble chimney formed and the pressure in the explosion cavity reached equilibrium, gases began to migrate up through the rubble chimney aided by barometric pumping. There is also an unknown fault located 300 m from the explosion cavity that provided another gas migration pathway between the damage zone of the cavity and the surface.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Stress corrosion in titanium alloys and other metallic materials

Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.

Harkins, C. G.↗

Space colonization - Some physiological perspectives

Physiological criteria determining the design of the habitat for a space colony with 10,000 people are discussed. Centrifugally generated earth-normal gravity, maximum ionizing radiation dose standards less than or equal to 0.5 rem/year (obtained with passive shielding), and an atmosphere with reduced nitrogen partial pressures were established as design requirements for the habitat. However, further research is needed to determine whether humans experience complete adaptation to weightlessness and whether there are long-term effects of breathing various atmospheric mixtures and pressures.

Winkler, L. H.↗

High performance N2O4/amine elements blowapart

Hypergolic earth-storable N2O4/Amine propellants are used for a wide range of liquid propulsion system applications. These propellants are highly reactive and can experience reactive stream separation (RSS, i.e., blowapart) which can inhibit intraelement mixing, hence reducing the overall spray mixture ratio and mass distribution, which can result in altered combustion efficiency, gas-side heat transfer coefficient, and stability. An experimental and analytical program was conducted to develop an understanding of the mechanisms controlling RSS. The program and product was development of design criteria for coping with RSS to allow the design of high performing, stable injectors. RSS mechanisms were identified using high speed color photography to observe reactive stream mixing of single element injectors tested with N2O4/MMH, N2O4/A-50, and N2O4/N2H4 propellants. The parametric characterization included modeling of the Space Shuttle Orbital Maneuvering System and Reaction Control System engine injectors.

Source record↗

Carbon catalyzed SO2 oxidation by NO2 and O3

The oxidation of SO2 to sulfate on carbon particles by trace quantities of NO2 and O3 was studied. Particulate carbon black was either: (1) directly exposed on the pan of a microbalance to various humidified mixtures of SO2 and oxidant gas and the resultant weight gains monitored, or (2) the gas mixtures were bubbled through aqueous suspensions of carbon black and pure water blanks. In each set of experiments the run times were varied appropriately and the yields of sulfate were determined analytically. Conversion of SO2 to sulfate was thus characterized as a function of exposure time and of oxidant gas. Carbon black was determined to be an excellent catalyst for SO2 oxidation to sulfate by both NO2 and O3. No saturation effects were observed in either experimental approach. Conversions of SO2 to sulfate did not appear pH dependent.

Cofer, W. R., III↗

A pumped two-phase cooling system for spacecraft

A pumped, two-phase heat-transport system is being developed for possible use for temperature control of scientific instruments on future NASA missions. As compared to a single-phase system, this two-phase system can maintain tighter temperature control with less pumping power. A laboratory model of the system has been built and tested. The measured heat transfer coefficients were approximately the same as in heat pipes, 220 Btu/hr-sq ft-F, as compared to 25 Btu/hr-sq ft-F for single-phase liquid flow. Heat shearing between experiments has been demonstrated wherein vapor generated in the cold plate of an active experiment was condensed in a cold, unheated experiment. System stability has been observed. However, additional development is needed. The use of non-azeotropic mixtures of coolants appears especially promising as a simple way to determine exit quality and thus control the flow rates to prevent dryout.

Ollendorf, S.↗

Magnetic monopole search by 130 m(2)sr He gas proportional counter

A search experiment for cosmic ray magnetic monopoles was performed by means of atomic induction mechanism by using He mixture gas proportional counters of the calorimeter (130 square meters sr) at the center of the Akeno air shower array. In 3,482 hours operation no monopole candidate was observed. The upper limit of the monopole flux is 1.44 x 10 to the minus 13th power cm-z, sec -1, sr-1 (90% C.L.) for the velocity faster than 7 x 0.0001 c.

Hara, T.↗