Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Magnetic property of transition metal-Si atomic line on silicon Σ3 grain boundary: A theoretical study

Using first-principles calculations within density functional theory, we investigate the electronic and magnetic properties of different 3d transition metal-Si atomic lines on silicon Σ3 (112) grain boundary, which can be formed through grain boundary segregation. We find that (i) Fe atoms occupy the substitutional sites at the grain boundary and form an Fe-Si atomic line, but the interaction between the Fe atoms is antiferromagnetic. (ii) The ferromagnetic stability increases with the atomic number of the transition metals and Co-Si atomic line is more stable in the ferromagnetic phase and shows a semimetallic behavior. We suggest that this special TM-Si atomic line formed by thermodynamically favorable transition metal segregation on Si grain boundary could be used in design of spin-dependent quantum devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Redox-active on-surface polymerization of single-site divalent cations from pure metals by a ketone-functionalized phenanthroline

Metallic iron, chromium, or platinum mixing with a ketone-functionalized phenanthroline ligand on a single crystal gold surface demonstrates redox activity to a well-defined oxidation state and assembly into thermally stable, one dimensional, polymeric chains. The diverging ligand geometry incorporates redox-active sub-units and bi-dentate binding sites. The gold surface provides a stable adsorption environment and directs growth of the polymeric chains, but is inert with regard to the redox chemistry. These systems are characterized by scanning tunnelling microscopy, non-contact atomic force microscopy, and X-ray photoelectron spectroscopy under ultra-high vacuum conditions. The relative propensity of the metals to interact with the ketone group is examined, and it is found that Fe and Cr more readily complex the ligand than Pt. The formation and stabilization of well-defined transition metal single-sites at surfaces may open new routes to achieve higher selectivity in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing conductivity of metallic carbon nanotube networks by transition metal adsorption

The conductivity of carbon nanotube thin films is mainly determined by carbon nanotube junctions, the resistance of which can be reduced by several different methods. We investigate electronic transport through carbon nanotube junctions in a four-terminal configuration, where two metallic single-wall carbon nanotubes are linked by a group 6 transition metal atom. The transport calculations are based on the Green’s function method combined with the density-functional theory. The transition metal atom is found to enhance the transport through the junction near the Fermi level. However, the size of the nanotube affects the improvement in the conductivity. The enhancement is related to the hybridization of chromium and carbon atom orbitals, which is clearly reflected in the character of eigenstates near the Fermi level. The effects of chromium atoms and precursor molecules remaining adsorbed on the nanotubes outside the junctions are also examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulation of systems of shear bands in ductile metal with inclusions

We develop a method for numerical simulations of high strain-rate loading of mesoscale samples of ductile metal with inclusions. Because of its small-scale inhomogeneity, the composite material is prone to localized shear deformation (adiabatic shear bands). This method employs the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. 127–139, 1992] to ensure that the micro mechanical behavior of the metal and inclusions is reflected properly in the behavior of the composite at the mesoscale. To find the effective plastic strain rate when shear bands are present, we extend and apply the analytic and numerical analysis of shear bands of Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31–41, 1996]. Our tests of the method focus on the stress/strain response in uniaxial-strain flow, both compressive and tensile, of depleted uranium metal containing silicon carbide inclusions. We use the Preston-Tonks-Wallace viscoplasticity model [J. Appl. Phys., vol. 93, pp. 211–220, 2003], which applies to the high strain-rate regime of an isotropic viscoplastic solid. In results, we verify the elevated temperature and thermal softening at shear bands in our simulations of pure DU and DU/SiC composites. We also note that in composites, due the asymmetry caused by the inclusions, shear band form at different times in different subcells. In particular, in the subcells near inclusions, shear band form much earlier than they do in pure DU.

36 MATERIALS SCIENCE↗

Spin Hall effects in metallic antiferromagnets – perspectives for future spin-orbitronics

We investigate angular dependent spin-orbit torques from the spin Hall effect in a metallic antiferromagnet using the spin-torque ferromagnetic resonance technique. The large spin Hall effect exists in PtMn, a prototypical CuAu-I-type metallic antiferromagnet. By applying epitaxial growth, we previously reported an appreciable difference in spin-orbit torques for c- and a-axis orientated samples, implying anisotropic effects in magnetically ordered materials. In this work we demonstrate through bipolar-magnetic-field experiments a small but noticeable asymmetric behavior in the spin-transfer-torque that appears as a hysteresis effect. We also suggest that metallic antiferromagnets may be good candidates for the investigation of various unidirectional effects related to novel spin-orbitronics phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled modulation of hard and soft X-ray induced tunneling currents utilizing coaxial metal-insulator-metal probe tips

Here, the effect of a local external electric field on the barrier potential of a tunneling gap is studied utilizing an emerging technique, synchrotron x-ray scanning tunneling microscopy. Here, we demonstrate that the shape of the potential barrier in the tunneling gap can be altered by a localized external electric field, generated by voltages placed on the metallic outer shield of a nanofabricated coaxial metal-insulator-metal tip, resulting in a controlled linear modulation of the tunneling current. Experiments at hard and soft x-ray synchrotron beamlines reveal that both the chemical contrast and magnetic contrast signals measured by the tip can be drastically enhanced, resulting in improved local detection of chemistry and magnetization at the surface.

36 MATERIALS SCIENCE↗

Semi-metallic SrIrO 3 films using solid-source metal-organic molecular beam epitaxy

Perovskite SrIrO 3 films and its heterostructures are very promising, yet less researched, avenues to explore interesting physics originating from the interplay between strong spin–orbit coupling and electron correlations. Elemental iridium is a commonly used source for molecular beam epitaxy (MBE) synthesis of SrIrO 3 films. However, elemental iridium is extremely difficult to oxidize and evaporate while maintaining an ultra-high vacuum and a long mean free path. Here, we calculated a thermodynamic phase diagram to highlight these synthesis challenges for phase-pure SrIrO 3 and other iridium-based oxides. We addressed these challenges using a novel solid-source metal-organic MBE approach that rests on the idea of modifying the metal-source chemistry. Phase-pure, single-crystalline, coherent, epitaxial (001) pc SrIrO 3 films on (001) SrTiO 3 substrate were grown. Films demonstrated semi-metallic behavior, Kondo scattering, and weak antilocalization. Our synthesis approach has the potential to facilitate research involving iridate heterostructures by enabling their atomically precise syntheses.

36 MATERIALS SCIENCE↗

A liquid metal dropper for experiments on the wettability of liquid metals on plasma facing components

A liquid metal dropper has been developed as a part of the Ion-Gas-Neutral Interactions with Surfaces 2 (IGNIS-2) facility at The Pennsylvania State University. The dropper has the capability of directly applying drops to candidate plasma facing materials for nuclear fusion reactors to enable measurements of their liquid metal wetting properties. The results presented here are specific to the use of lithium in the dropper. This paper discusses the design choices of the liquid metal dropper and its chamber, including the heating and temperature control and the dropper’s motorized operation. Lithium drops of masses ranging from 0.05 g up to 0.13 g, equivalent to drop diameters between 5.6 mm to 1 cm, have been consistently dispensed by the dropper. A new algorithm is developed and used to automate the analysis of the contact angle between the liquid drops and substrate material for efficient analysis of video data recorded to study the wetting properties of candidate plasma-facing components.

Instruments & Instrumentation↗

Effects of fluorinated solvents on electrolyte solvation structures and electrode/electrolyte interphases for lithium metal batteries

Electrolyte is very critical to the performance of the high-voltage lithium (Li) metal battery (LMB), which is one of the most attractive candidates for the next generation high-density energy storage systems. Electrolyte formulation and structure determine the physical properties of the electrolytes and their interfacial chemistries on the electrode surfaces. Localized high-concentration electrolytes (LHCEs) outperform state-of-the-art carbonate electrolytes in many aspects in LMBs due to their unique solvation structure. Types of fluorinated co-solvents used in LHCEs are investigated here in searching for the most suitable diluent for high concentration electrolytes (HCEs). Non-solvating solvents (including fluorinated ethers, fluorinated borate and fluorinated orthoformate) added in HCEs enable the formation of LHCEs with high-concentration solvation structures. However, low solvating fluorinated carbonate will coordinate with Li+ ions and form a second solvation shell or a pseudo-LHCE which diminishes the benefits of LHCE. In addition, it is evident that the diluent has significant influence on the electrode/electrolyte interphases (EEIs) beyond retaining the high-concentration solvation structures. Diluent molecules surrounding the high-concentration clusters could accelerate or decelerate the anion decomposition through co-participation of diluent decomposition in the EEI formation. The varied interphase features lead to significantly different battery-performance. This study points out the importance of diluents and their synergetic effects with the conductive salt and the solvating solvent in designing LHCEs. These systematic comparisons and fundamental insights into LHCEs using different types of fluorinated solvents can guide further development of advanced electrolytes for high-voltage LMBs.

Cao, Xia↗

Design and fabrication of a high-density multilayer metal-insulator-metal capacitor based on selective etching

This paper presents a novel and cost-effective method for fabricating high-density multilayer metal-insulator-metal (MIM) integrated capacitors. To eliminate the usage of numerous photolithography steps when parallel stacking multiple capacitors layers, a unique process has been developed based on depositing the MIM layers onto a substrate with two protruding pillars, polishing down the pillars to expose the multilayer cross sections and then selectively etching the metal layers on each pillar to form the alternating capacitor plate electrodes. For demonstration purpose, only capacitors with two dielectric layers were fabricated, and the measurement results were verified by a compact analytical model together with finite element simulations. With 200 nm thick silicon nitride/oxide dielectric layers, a capacitance density of 0.6 fF mu m(-2) was achieved, which can be easily increased by scaling down the layer thicknesses and/or stacking more layers. A low equivalent series resistance (ESR) of 300-700 m Omega was measured, and the self-resonance frequency was above measurement limits (> 100 MHz). Further design optimization shows that the ESR can be reduced to below 80 m Omega, while the operation frequency extended to above 2.6 GHz.

Tseng, VFG↗

The solubility of hydrogen and deuterium in alloyed, unalloyed and impure plutonium metal

Hydrogen is exothermically absorbed in many transition metals, all rare earths and the actinides. The hydrogen gas adsorbs, dissociates and diffuses into these metals as atomic hydrogen. Absorbed hydrogen is generally detrimental to Pu, altering its properties and greatly enhancing corrosion. Measuring the heat of solution of hydrogen in Pu and its alloys provides significant insight into the thermodynamics driving these changes. Hydrogen is present in all Pu metal unless great care is taken to avoid it. Heats of solution and formation are provided along with evidence for spinodal decomposition.

36 MATERIALS SCIENCE↗

Local metallic and structural properties of the strongly correlated metal $\mathrm{LaNiO_3}$ using $\mathrm{^8Li β-NMR}$

We report β-detected NMR of ion-implanted $\mathrm{^8Li}$ in a single crystal and thin film of the strongly correlated metal $\mathrm{LaNiO_3}$. Spin-lattice relaxation measurements reveal two distinct local environments, both metallic as evident from $T$-linear Korringa $\mathrm{1/T_1}$ below $\mathrm{200K}$ with slopes comparable to other metals. A small approximately temperature-independent Knight shift of $\mathrm{~74 ppm}$ is observed, yielding a normalized Korringa product characteristic of substantial antiferromagnetic correlations.We find no evidence for a magnetic transition from 4 to $\mathrm{310 K}$. The similarity of these features in the two very different samples indicates that they are intrinsic and unrelated to dilute oxygen vacancies. We attribute the two environments to two distinct but similar crystallographic $\mathrm{^8Li}$ sites and not to any form of phase inhomogeneity, but this is inconsistent with the conventional rhombohedral structure of $\mathrm{LaNiO_3}$, and also cannot be simply explained by the common alternative orthorhombic or monoclinic distortions.

36 MATERIALS SCIENCE↗

Binding energy and lifetime of excitons in metallic nanotubes

The difficulty of describing excitons in semiconducting single-wall nanotubes analytically lies with the fact that excitons can neither be considered strictly one- nor two-dimensional objects. However, the situation changes in the case of metallic nanotubes where, by virtue of screening from gapless metallic subbands, the radius of the exciton becomes much larger than the radius of the nanotube R ex >> R. Taking advantage of this, we develop the theory of excitons in metallic nanotubes, determining that their binding energy is about 0.08v/R, in agreement with the existing experimental data. Additionally, because of the presence of the gapless subbands, there are processes where bound excitons are scattered into unbound electron-hole pairs belonging to the gapless subbands. Such processes lead to a finite exciton lifetime and the broadening of its spectral function. Here, we calculate the corresponding decay rate of the excitons.

excitons↗

Compton profile of VO 2 across the metal-insulator transition: Evidence of a non-Fermi liquid metal

Many-body diffusion Monte Carlo is used to obtain the first-principles momentum distribution and Compton profile of vanadium dioxide. Our results for the Compton profile are in good agreement with the experimental values, and we show that good qualitative agreement in the scaled Compton profile difference across the monoclinic to rutile phase transition depends on an accurate description of electron correlation. The electron momentum distribution enables new insights into the metal-insulator phase transition. For example, the probability for electron scattering in the proximity of the Fermi surface (forward scattering) is suppressed in the vanadium chain direction (rutile c axis) but enhanced in perpendicular directions. However, along the c axis we observe an increase at ~2k F in the momentum distribution, which is characteristic for Friedel oscillations (backscattering). Our analysis of the momentum distribution supports experimentally observed anisotropies and provides an explanation for the anomalously low electronic thermal conductivity observed recently in the metallic phase. Furthermore, our results indicate non-Fermi liquid behavior as well as quasi-one-dimensional Friedel oscillations in the metallic rutile phase, which is reminiscent of a Tomanaga-Luttinger liquid with impurities.

36 MATERIALS SCIENCE↗

Boosting the External Quantum Efficiency of AlGaN-Based Metal–Semiconductor–Metal Ultraviolet Photodiodes by Electrode Geometry Variation

Fast aluminum-gallium-nitride–based metal–semiconductor–metal ultraviolet photodiodes were successfully designed, fabricated, and characterized using conventional photolithography techniques. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the device performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Furthermore, based on the independently measured Hall mobility and electric field, we evaluated the carrier transit time of the devices as 1.31 ps with bias-voltage–independent external quantum efficiency of 1198% in photoconductive mode at 19.5 V and 70% at 60 V for n -doped and intrinsic devices, respectively.

42 ENGINEERING↗

Investigation of AlGaN-Delta–GaN-Based UV Photodiodes in a Metal–Semiconductor–Metal Configuration for Efficient and Fast Solar Blind UV Sensing

Metal–semiconductor–metal (MSM) configured UV photodiodes (PD’s) were designed and fabricated on an AlGaN/GaN–based substrate for efficient and ultrafast UV detection. The purpose was to investigate the feasibility of obtaining efficient and ultrafast temporal response from these devices in the UV given the challenges associated with the formation of Schottky contacts on laterally oriented AlGaN/GaN thin films. Two sets of devices were implemented using Pt and Au as metal contacts with 5-µm finger width, 5-µm finger spacing, and a 50-µm x 50-µm active area. Spectral and voltage bias studies were done to establish the spectral profile and the effect of bias voltage on the responsivity of the detectors at 265 nm. Here, the best vertical MSM PD’s produced 0.6-A/W responsivity under 10-V bias voltage at 265 nm. Peak spectral responsivities were recorded as 1.35 A/W and 1.25 A/W at 240 nm for Pt and Au PD’s, respectively.

42 ENGINEERING↗