Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MASS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

A computational parametric study of three-dimensional sidewall compression scramjet inlets at Mach 10

A computational parametric study of three-dimensional sidewall compression scramjet inlets has been performed. The parameters considered for the study include the leading edge sweep angle, varied between 30 and 60 degrees, and the cowl position, located at the throat and at two forward positions. Additionally, the effects of laminar and turbulent boundary layers as well as adiabatic and cold wall boundary conditions are assessed. The parametric study is performed for a Mach number of 10 and a unit freestream Reynolds number of 2 x 10 to the 6th/ft at a geometric contraction ratio of 5. Comparisons among the various configurations are made in terms of the gross parameters of mass capture, throat Mach number, total pressure recovery, and area weighted internal pressure ratios, as well as more detailed flow field phenomena comparisons. The inclusion of one 0-deg sweep computation indicates that the leading edge may be swept by up to 30 deg before significant changes in the gross flow field parameters occur. It is found that a 45-deg sweep configuration provides a good compromise of mass capture, total pressure recovery, and internal compression.

Holland, Scott D.↗

Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down

In the absence of external heat exchangers, the on-orbit transfer of cryogenic propellants requires the receiver tank to first be quenched to a sufficiently low energy state to allow for a continuous no-vent fill to avoid unnecessary venting of liquid. One proposed method for tank chilldown that minimizes the potential for venting liquid is the charge hold vent (CHV) method. CHV follows a cyclic process that gradually removes thermal energy from the receiver tank by injecting liquid with the vent valve closed and allowing the fluid and wall to reach near-thermal equilibrium before venting the superheated vapor. However, the CHV method must be optimized to minimize complexity, mass, and time. This paper presents a modular CHV analytical model used to quantify the number of cycles and propellant mass consumed based on first principles. The model is used to examine the effect of eight parameters: receiver tank material, volume, mass, maximum expected operating pressure, and initial pressure, liquid injection pressure and temperature, and the target temperature. The model is validated against the only two available CHV datasets. Based on results, the tank mass-to-volume ratio is the most important factor in determining the number of CHV cycles and thus degree of difficulty in tank chilldown. The model can easily be used for early-stage design, sizing, and analysis of cryogenic propellant transfer systems.

Tank Chilldown↗

Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down

Abstract. In the absence of external heat exchangers, the on-orbit transfer of cryogenic propellants requires the receiver tank to first be quenched to a sufficiently low energy state to allow for a continuous no-vent fill to avoid unnecessary venting of liquid. One proposed method for tank chilldown that minimizes the potential for venting liquid is the charge hold vent (CHV) method. CHV follows a cyclic process that gradually removes thermal energy from the receiver tank by injecting liquid with the vent valve closed and allowing the fluid and wall to reach near-thermal equilibrium before venting the superheated vapor. However, the CHV method must be optimized to minimize complexity, mass, and time. This paper presents a modular CHV analytical model used to quantify the number of cycles and propellant mass consumed based on first principles. The model is used to examine the effect of eight parameters: receiver tank material, volume, mass, maximum expected operating pressure, and initial pressure, liquid injection pressure and temperature, and the target temperature. The model is validated against the only two available CHV datasets. Based on results, the tank mass-to-volume ratio is the most important factor in determining the number of CHV cycles and thus degree of difficulty in tank chilldown. The model can easily be used for early-stage design, sizing, and analysis of cryogenic propellant transfer systems. Keywords: tank chilldown, charge-hold-vent, no-vent fill

Tank Chilldown↗

Developing Ion Mobility-Mass Spectrometry for Structural Characterization of Complex Molecular Systems, Final Report/Product Number: DOE_ER-15520-3

We have worked on developing the utility for analytical and fundamental studies in the area of ion mobility-mass spectrometry (IM-MS), including integrating enhanced molecular dynamics simulations (MDS) with IM-MS. We have continued development of cryogenic (80 K) IM-MS, which affords novel investigations of ionic water clusters and hydrated polar molecule ions. In the course ofthese studies we have provided new insights on the mechanism of electrospray ionization as well as how droplet dehydration influences the structure(s) of hydrated protons and hydronium ions, specifically how the structure(s) of the hydrated species change with the extent of hydration. We have also shown how hydration affects the structure(s) of hydrated polar molecules. A perspective on this work has just been published in Accounts of Chemical Research ; all such papers are by invitation from the Editor. We have also developed new IM-MS approaches to deconvolution of complex tandem MS spectra and we have demonstrated the utility of these approaches through several collaborations with other groups that amply illustrate the broader impact of the research. This work clearly illustrates that IM-MS is rapidly evolving as one of the most versatile and information-rich mass spectrometry-based analytical techniques. In many of the challenging areas of 21st century chemical research, the need for rapid, high-throughput, ultra-high sensitivity analytical techniques continues to grow. Tremendous gains have been made over the past two decades, much of it driven by the so-called “omics” research areas that were spawned by the human genome project. Such experimental capabilities are now spilling over into diverse areas including catalysis and nano-catalysis, polymer/materials science, petroleomics, esp. bio-mass/biofuels and renewable energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BLACK HOLE MASS AND EDDINGTON RATIO DISTRIBUTION FUNCTIONS OF X-RAY-SELECTED BROAD-LINE AGNs AT z {approx} 1.4 IN THE SUBARU XMM-NEWTON DEEP FIELD

In order to investigate the growth of supermassive black holes (SMBHs), we construct the black hole mass function (BHMF) and Eddington ratio distribution function (ERDF) of X-ray-selected broad-line active galactic nuclei (AGNs) at z {approx} 1.4 in the Subaru XMM-Newton Deep Survey (SXDS) field. A significant part of the accretion growth of SMBHs is thought to take place in this redshift range. Black hole masses of X-ray-selected broad-line AGNs are estimated using the width of the broad Mg II line and 3000 A monochromatic luminosity. We supplement the Mg II FWHM values with the H{alpha} FWHM obtained from our NIR spectroscopic survey. Using the black hole masses of broad-line AGNs at redshifts between 1.18 and 1.68, the binned broad-line AGN BHMFs and ERDFs are calculated using the V{sub max} method. To properly account for selection effects that impact the binned estimates, we derive the corrected broad-line AGN BHMFs and ERDFs by applying the maximum likelihood method, assuming that the ERDF is constant regardless of the black hole mass. We do not correct for the non-negligible uncertainties in virial BH mass estimates. If we compare the corrected broad-line AGN BHMF with that in the local universe, then the corrected BHMF at z = 1.4 has a higher number density above 10{sup 8} M{sub Sun} but a lower number density below that mass range. The evolution may be indicative of a downsizing trend of accretion activity among the SMBH population. The evolution of broad-line AGN ERDFs from z = 1.4 to 0 indicates that the fraction of broad-line AGNs with accretion rates close to the Eddington limit is higher at higher redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple rings around Wolf-Rayet evolution

We present optical narrow-band imaging of multiple rings existing around galactic Wolf-Rayet (WR) stars. The existence of multiple rings of material around Wolf-Rayet stars clearly illustrates the various phases of evolution that massive stars go through. The objects presented here show evidence of a three stage evolution. O stars produce an outer ring with the cavity being partially filled by ejecta from a red supergiant of luminous blue variable phase. A wind from the Wolf-Rayet star then passes into the ejecta materials. A simple model is presented for this three stage evolution. Using observations of the size and dynamics of the rings allows estimates of time scales for each stage of the massive star evolution. These are consistent with recent theoretical evolutionary models. Mass estimates for the ejecta, from the model presented, are consistent with previous ring nebula mass estimates from IRAS data, showing a number of ring nebulae to have large masses, most of which must in be in the form of neutral material. Finally, we illustrate how further observations will allow the determination of many of the parameters of the evolution of massive stars such as total mass loss, average mass loss rates, stellar abundances, and total time spent in each evolutionary phase.

Marston, A. P.↗

Masses of vector bosons in two-color dense QCD based on the hidden local symmetry

We construct a low-energy effective Lagrangian for the two-color QCD including the 'vector' bosons (mesons with J{sup P}=1{sup -} and diquark baryons with J{sup P}=1{sup +}) in addition to the pseudo-Nambu-Goldstone bosons with a degenerate mass M{sub {pi}}(mesons with J{sup P}=0{sup -} and baryons with J{sup P}=0{sup +}) based on the chiral symmetry breaking pattern of SU(2N{sub f}){yields}Sp(2N{sub f}) in the framework of the hidden local symmetry. We investigate the dependence of the vector boson masses on the baryon number density {mu}{sub B}. We show that the {mu}{sub B}-dependence signals the phase transition of U(1){sub B} breaking. We find that it gives information about mixing among vector bosons: e.g. the mass difference between '{rho}' and '{omega}' mesons is proportional to the mixing strength between the diquark baryon with J{sup P}=1{sup +} and the antibaryon. We discuss the comparison with lattice data for two-color QCD at finite density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Are BL Lac-type objects nearby black holes

It is pointed out that isolated black holes accreting interstellar gas can account for the characteristic properties of the Lacertids. Emission spectra for various interstellar gas densities and black hole masses are compared with the data plotted by Strittmatter et al. (1972) for the BL Lac-type objects. Rough estimates indicate that there may indeed be a finite number of stellar-mass black holes close to the earth as required by the theory. If it is determined that the BL Lac-type objects lie outside of the galactic disk a black hole accretion model may still apply if certain conditions are satisfied.

Shapiro, S. L.↗

Mass accretion and nested array dynamics from Ni-Clad Ti-Al wire array Z pinches.

Analysis of 50 mm diameter wire arrays at the Z Accelerator has shown experimentally the accretion of mass in a stagnating z pinch and provided insight into details of the radiating plasma species and plasma conditions. This analysis focused on nested wire arrays with a 2:1 (outeninner) mass, radius, and wire number ratio where Al wires were fielded on the outer array and Ni-clad Ti wires were fielded on the inner array.In this presentation, we will present analysis of data from other mixed Al/Ni-clad Ti configurations to further evaluate nested wire array dynamics and mass accretion. These additional configurations include the opposite configuration to that described above (Ni-clad Ti wires on the outer array, with Al wires on the inner array) as well as higher wire number Al configurations fielded to vary the interaction of the two arrays. These same variations were also assessed for a smaller diameter nested array configuration (40 mm). Variations in the emitted radiation and plasma conditions will be presented, along with a discussion of what the results indicate about the nested array dynamics. Additional evidence for mass accretion will also be presented.

43 PARTICLE ACCELERATORS↗

THE HIGHLY ECCENTRIC PRE-MAIN-SEQUENCE SPECTROSCOPIC BINARY RX J0529.3+1210

The young system RX J0529.3+1210 was initially identified as a single-lined spectroscopic binary. Using high-resolution infrared spectra, acquired with NIRSPEC on Keck II, we measured radial velocities for the secondary. The method of using the infrared regime to convert single-lined spectra into double-lined spectra, and derive the mass ratio for the binary system, has been successfully used for a number of young, low-mass binaries. For RX J0529.3+1210, a long-period (462 days) and highly eccentric (0.88) binary system, we determine the mass ratio to be 0.78 {+-} 0.05 using the infrared double-lined velocity data alone, and 0.73 {+-} 0.23 combining visible light and infrared data in a full orbital solution. The large uncertainty in the latter is the result of the sparse sampling in the infrared and the high eccentricity: the stars do not have a large velocity separation during most of their {approx}1.3 yr orbit. A mass ratio close to unity, consistent with the high end of the 1{sigma} uncertainty for this mass ratio value, is inconsistent with the lack of a visible light detection of the secondary component. We outline several scenarios for a color difference in the two stars, such as one heavily spotted component, higher-order multiplicity, or a unique evolutionary stage, favoring detection of only the primary star in visible light, even in a mass ratio {approx}1 system. However, the evidence points to a lower ratio. Although RX J0529.3+1210 exhibits no excess at near-infrared wavelengths, a small 24 {mu}m excess is detected, consistent with circumbinary dust. The properties of this binary and its membership in {lambda} Ori versus a new nearby stellar moving group at {approx}90 pc are discussed. We speculate on the origin of this unusual system and on the impact of such high eccentricity, the largest observed in a pre-main-sequence double-lined system to date, on the potential for planet formation.

79 ASTRONOMY AND ASTROPHYSICS↗

THE BINARY FRACTION OF LOW-MASS WHITE DWARFS

We describe spectroscopic observations of 21 low-mass ({<=}0.45 M{sub sun}) white dwarfs (WDs) from the Palomar-Green survey obtained over four years. We use both radial velocities and infrared photometry to identify binary systems, and find that the fraction of single, low-mass WDs is {<=}30%. We discuss the potential formation channels for these single stars including binary mergers of lower-mass objects. However, binary mergers are not likely to explain the observed number of single low-mass WDs. Thus, additional formation channels, such as enhanced mass loss due to winds or interactions with substellar companions, are likely.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DARK MATTER HALO CONCENTRATION AND STELLAR INITIAL MASS FUNCTION OF A CASSOWARY GROUP

We exploit the group environment of the CAmbridge Sloan Survey Of Wide ARcs in the skY z = 0.3 lens J2158+0257 to measure the group dynamical mass as a complement to the central dynamical and lensing mass constraints. Follow-up spectroscopy of candidate group members is performed using VLT/FORS2. From the resulting N = 21 confirmed members, we measure the group dynamical mass by calibrating an analytic tracer mass estimator with cosmological simulations. The luminosity-weighted line-of-sight velocity dispersion and the Einstein radius of the lens are used as mass probes in the inner regions of the galaxy. Combining these three observational probes allows us to independently constrain the mass and concentration of the dark matter halo, in addition to the total stellar mass of the central galaxy. We find a dark matter halo in remarkably good agreement with simulations (log{sub 10} M{sub 200}/M{sub Sun} = 14.2 {+-} 0.2, c{sub 200}= 4.4{sup +1.6}{sub -1.4}) and a stellar mass-to-light ratio which favors a Salpeter initial mass function ((M/L)* = 5.7 {+-} 1.2). Our measurement of a normal halo concentration suggests that there is no discrepancy between simulations and observations at the group mass scale. This is in contrast to the cluster mass scale for which a number of studies have claimed over-concentrated halos. While the halo mass is robustly determined, and the halo concentration is not significantly affected by systematics, the resulting stellar mass-to-light ratio is sensitive to the choice of stellar parameters, such as density profile and velocity anisotropy.

79 ASTRONOMY AND ASTROPHYSICS↗

Scalability and performance improvements in the Fermilab Mass Storage System

By 2009 the Fermilab Mass Storage System had encountered two major challenges: the required amount of data stored and accessed in both tiers of the system (dCache and Enstore) had significantly increased and the number of clients accessing Mass Storage System had increased from tens to hundreds of nodes and from hundreds to thousands of parallel requests. To address these challenges Enstore and the SRM part of dCache were modified to scale for performance, access rates, and capacity. This work increased the amount of simultaneously processed requests in a single Enstore Library instance from about 1000 to 30000. The rates of incoming requests to Enstore increased from tens to hundreds per second. Fermilab is invested in LTO4 tape technology and we have investigated both LTO5 and Oracle T10000C to cope with the increasing needs in capacity. We have decided to adopt T10000C, mainly due to its large capacity, which allows us to scale up the existing robotic storage space by a factor 6. This paper describes the modifications and investigations that allowed us to meet these scalability and performance challenges and provided some perspectives of Fermilab Mass Storage System.

Crawford, Matt↗

The DESI One-Percent Survey: Constructing Galaxy–Halo Connections for ELGs and LRGs Using Auto and Cross Correlations

In the current Dark Energy Spectroscopic Instrument (DESI) survey, emission line galaxies (ELGs) and luminous red galaxies (LRGs) are essential for mapping the dark matter distribution at z ~ 1. We measure the auto and cross correlation functions of ELGs and LRGs at 0.8 < z ≤ 1.0 from the DESI One-Percent survey. Following Gao et al., we construct the galaxy–halo connections for ELGs and LRGs simultaneously. With the stellar–halo mass relation for the whole galaxy population (i.e., normal galaxies), LRGs can be selected directly by stellar mass, while ELGs can also be selected randomly based on the observed number density of each stellar mass, once the probability P sat of a satellite galaxy becoming an ELG is determined. We demonstrate that the observed small scale clustering prefers a halo mass-dependent P sat model rather than a constant. With this model, we can well reproduce the auto correlations of LRGs and the cross correlations between LRGs and ELGs at r p > 0.1 Mpc h –1 . We can also reproduce the auto correlations of ELGs at r p > 0.3 Mpc h –1 (s > 1 Mpc h –1 ) in real (redshift) space. Although our model has only seven parameters, we show that it can be extended to higher redshifts and reproduces the observed auto correlations of ELGs in the whole range of 0.8 < z ≤ 1.6, which enables us to generate a lightcone ELG mock for DESI. With the above model, we further derive halo occupation distributions for ELGs, which can be used to produce ELG mocks in coarse simulations without resolving subhalos.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistics of density maxima and the large-scale matter distribution

High peaks in Gaussian noise display enhanced clustering. The enhancement takes two forms: on large scales one obtains a linear amplification of the correlation function which is independent of scale. On smaller scales, but larger than the mass scale of the peaks themselves, a nonlinear (exponential) enhancement of the number density of high peaks in overdense regions arises. The large-scale correlations of Abell's rich clusters can be understood as a manifestation of this phenomenon. If the formation of bright galaxies favors the high overdensity peaks then the number of galaxies (per unit mass) in clusters and groups may be considerably enhanced. Consequences of these ideas for the density parameter and the large-scale matter distribution are discussed.

Kaiser, N.↗

The Observed Galactic Annihilation Line: Possible Signature of Accreting Small Mass Black Holes in the Galactic Center

Various balloon and satellite observatories have revealed what appears to be an extended source of 0.511 MeV annihilation radiation with flux of approx. 10(exp -3) photons/sq cm/s centered on the Galactic Center. Positrons from radioactive products of stellar explosions can account for a significant fraction of the emission. We discuss an additional source for this emission: namely e(+)e(-) pairs produced when X-rays generated from the approx. 2.6 x 10(exp 6) solar mass Galactic Center Black Hole interact with approx. 10 MeV temperature blackbody emission from 10(exp 17) g black holes within 10(exp 14-l5) cm of the center. The number of such Small Mass Black Holes (SMMBHs) can account for the production of the 10(exp 42) e(+)/s that produces the observed annihilation in the inner Galaxy when transport effects are taken into account. We consider the possibility for confirming the presence of these SMMBHs in the Galactic Center region with future generations of gamma-ray instruments if a blackbody like emission of approx. 10 MeV temperature would be detected by them. Small Mass Black Hole can be a potential candidate for dark (invisible) matter hal

Titarchuk, Lev↗

Characteristics and effects of aerosols during blowing snow events in the central Arctic

Sea salt aerosol (SSaer) significantly impacts aerosol-radiation and aerosol-cloud interactions, and sublimated blowing snow is hypothesized to be an important SSaer source in polar regions. Understanding blowing snow and other wind-sourced aerosols’ climate relevant properties is needed, especially during winter when Arctic amplification is greatest. However, most of our understanding of blowing snow SSaer comes from modeling studies, and direct observations are sparse. Additionally, SSaer can originate from multiple sources, making it difficult to disentangle emission processes. Here, we present comprehensive observations of wind-sourced aerosol during blowing snow events from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in the central Arctic. High wind speed strongly enhances total aerosol number, submicron sodium chloride mass, cloud condensation nuclei concentrations, and scattering coefficients. Generally, the relative response of aerosol properties to wind speed enhancement is strongest in fall when Arctic aerosol concentrations are lowest. Blowing snow events showed similar aerosol and environmental properties across events, apart from occasions with high snow age (>6 days since last snowfall). Coarse-mode number concentrations (>1 μm) are better explained by variability in wind speed averaged over 12-h air mass back trajectories arriving at the MOSAiC site compared to local, instantaneous wind speed, suggesting the importance of regional transport and consideration of air mass history for wind-driven aerosol production. These MOSAiC observations provide new insights into wind-driven aerosol in the central Arctic and may help validate modeling studies and improve model parameterizations particularly for aerosol direct and indirect radiative forcing.

54 ENVIRONMENTAL SCIENCES↗

The Experimental Status of Glueballs

In this paper, I briefly review the experimental situation for glueballs. These and other resonances with large gluonic components are predicted as bound states by Quantum Chromodynamics (QCD). The lightest (scalar) glueball is estimated to have a mass in the range from 1 to 2 GeV/c{sup 2}; pseudoscalar and tensor glueballs are expected at higher masses. Many different experiments exploiting a large variety of production mechanisms have presented results in recent years on light mesons with J{sup PC} = 0{sup ++}, 0{sup -+}, and 2{sup ++} quantum numbers. Good evidence exists for a scalar glueball which is mixed with nearby mesons, but a full understanding is still missing. Evidence for tensor and pseudoscalar glueballs are weak at best.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗