Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Ultrasmooth growth of amorphous silicon films through ion-induced long-range surface correlations

Ultrasmooth amorphous silicon films with a constant roughness below 0.2 nm were produced for film thickness up to {approx}1 {mu}m by magnetron sputtering under negative voltage substrate biasing (100-400 V). In contrast, under unbiased conditions the roughness of the resulting mounded films increased linearly with growth time due to shadowing effects. A detailed analysis of the amorphous film growth dynamics proves that the bias-induced ultrasmoothness is produced by a downhill mass transport process that leads to an extreme surface leveling inducing surface height correlations up to lateral distances close to 0.5 {mu}m.

36 MATERIALS SCIENCE↗

Preparation and characterization of Co single-crystal thin films with hcp, fcc and bcc structures

Co crystals with three different structures are realized in the form of single-crystal thin films hetero-epitaxially grown on single-crystal substrates by ultrahigh vacuum rf magnetron sputtering. hcp-, fcc-, and bcc-Co single-crystal films are formed on Cr(211){sub bcc}, Cu(100){sub fcc}, and GaAs(110){sub B3}, respectively. The film growth process is studied by RHEED, and the lattice constants of these Co films are determined by x-ray diffraction. The magnetization properties of these thin films are reflecting the magnetocrystalline anisotropies of Co crystals with the easy magnetization axes along hcp<0001>, fcc<111>, and bcc<100> directions.

36 MATERIALS SCIENCE↗

Spin correlations and electron transport in MnBi:Au films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Au{sub x}Bi{sub 45} (x = 0, 4.5) thin films prepared by magnetron sputtering have been investigated. The magnetization of the MnBi films decreases and the coercivity increases due to Au doping. The temperature dependence of resistivity between 2 to 300 K shows that the films are metallic but the 4.5% Au-doped film shows a Kondo behavior with resistance minimum at 10.2 K. The magnetoresistance is anisotropic and the positive transverse magnetoresistance is significantly enhanced (16.3% at 70 kOe) by Au doping. We interpret these data in terms of a model in which Au atoms preferentially substitute for Mn atoms on the Mn lattice, and some Mn atoms are displaced to interstitial sites in the NiAs structure. These interstitial Mn atoms are coupled antiferromagnetically to the Mn atoms on the original Mn lattice leading to the large decrease in magnetization, Kondo effect, and the positive magnetoresistance.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Double hysteresis loop induced by defect dipoles in ferroelectric Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} thin films

Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} (PZT80/20) thin films were deposited on the Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by RF magnetron sputtering. Mainly perovskite crystalline phase with highly (202)-preferred orientation, determined by x-ray diffraction, was formed in the lead zirconate titanate (PZT)(80/20) thin films. Polarization measurements of the unannealed and aged films showed a clear double hysteresis loop. However, the double hysteresis loop phenomenon was greatly suppressed in the PZT thin films annealed under pure oxygen, and thus they exhibited larger remnant polarization (P{sub r} = 6.3 {mu}C/cm{sup 2}). The related mechanism for the appearance of constricted and double hysteresis loops was investigated to be associated with the realignment and disassociation of defect dipoles via oxygen octahedral rotations or oxygen vacancy diffusion. The butterfly-shaped C-V characteristic curve with a valley gave further evidence for double hysteresis loop characteristic in the unannealed and aged PZT thin films.

36 MATERIALS SCIENCE↗

High frequency characteristics of FeCoAlO thin films combined the effects of stress and magnetic field

The soft magnetic FeCoAlO thin films with different response at high frequency were prepared by using RF magnetron sputtering. Two different configurations of the sputtering targets were used: the Al{sub 2}O{sub 3} chips were placed on Fe{sub 70}Co{sub 30} disk either uniformly dispersed on the sputtering area (Target-A) or dispersed on the half side of the sputtering area (Target-B). It was found that, although, the films deposited from both of Target A and B possessed good soft magnetic properties and in-plane uniaxial magnetic anisotropy, they showed different behaviors at high frequency. The films deposited by using Target-A have mean permeability of 500 and a cut-off frequency (f{sub r}) of around 780 MHz, while the films deposited by using Target-B have mean permeability of 200 and a f{sub r} of 3.4 GHz. The higher f{sub r} of the later corresponds to the higher uniaxial anisotropic field in the films deposited by using the Target-B, which due to an extra anisotropy induced by the stress resulted from gradient of the Al-O composition. By adjusting the configuration of Target-B, the permeability and f{sub r} can be tuned to satisfy the different requirements for certain industrial applications.

36 MATERIALS SCIENCE↗

Elaboration, characterization of CrN- based coatings

Cr, CrN and CrAlN monolayers were synthesized by RF dual magnetron sputtering on AISI4140 steel and silicon substrates at 200 deg. C. Multilayers coatings based on the three mono-layers such as CrN/CrAlN and Cr/CrN/CrAlN were also synthesized only on Si. The physico-chemical and mechanical properties of the layers were determined by AFM, SEM+WDS, stress, roughness and nanoindentation measurements. The influence of the thickness on the mechanical properties of the monolayers stresses has been studied and as a consequence we compared the mono and multilayers stress state.

36 MATERIALS SCIENCE↗

O K-energy loss near-edge structure change induced by tantalum impurity in monoclinic hafnium oxide

The present paper reports the energy loss near-edge structure (ELNES) study of monoclinic HfO{sub 2} (m-HfO{sub 2}) and tantalum doped m-HfO{sub 2} (Ta{sub 0.1}Hf{sub 0.9}O{sub 2}) thin films prepared by radio frequency magnetron co-sputtering method. A change in the O K-ELNES spectra was observed as the amount of dopant increases. In order to precise the common features and the differences as a function of Ta defect nature (substitutional or interstitial) in HfO{sub 2}, the O K-ELNES were commented with respect to density functional theory calculations implemented in Vienna ab initio simulation package code. The calculated Ta doped HfO{sub 2} band structure showed that substitutional tantalum is the dominant defect and the spectral differences between doped and non-doped HfO{sub 2} are mainly originated from the change in the local cation distribution around the oxygen atoms.

36 MATERIALS SCIENCE↗

Fully epitaxial Fe/MgO/Fe(001) junctions with nonmagnetic metal layer insertion

Fully epitaxial Fe/Ag-wedge/MgO/Fe(001) magnetic tunnel junctions (MTJs) were prepared by using a combination of magnetron sputtering and molecular beam epitaxy, and their magneto-transport properties were investigated for the Ag thickness range of 0-9 monolayer (ML). The large tunneling magnetoresistance (TMR) ratios of up to 160% at room temperature were obtained in the Fe/MgO/Fe region (Ag: 0 ML) after the optimization of the preparation conditions. The finite TMR ratio was observed until the Ag thickness reached 4 ML, although no significant oscillation due to quantum well states (QWS) was seen. This is the first demonstration of TMR in the fully epitaxial MTJs with nonmagnetic metal layer insertion which can potentially create spin-dependent QWS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The crystallinity and mechanical properties of indium tin oxide coatings on polymer substrates

We present the relationship between the microstructure and mechanical strength of indium tin oxide (ITO) on flexible substrates. With varying thickness (h{sub f}), ITO is deposited on polyethylene terephthalate (PET) by dc magnetron sputtering. The microstructure of ITO is controlled by substrate surface conditions and sputtering parameters. The maximum substrate temperature during deposition is limited to 80 deg. C due to the low glass transition temperature (T{sub g}) of PET. The crystallinity and surface roughness (R{sub rms}) are analyzed by high resolution x-ray diffraction, high resolution transmission electron microscopy, and AFM. The crack resistance of ITO is evaluated by uniaxial tension test. The experimental results reveal that, at a fixed h{sub f}, the degree and quality of crystallinity of ITO are highly improved by increasing sputtering power and the substrate temperature. As the crystallinity is improved, the ratio of preferred growth orientations of (222) to (400) is increased and the degree of peak shifts to lower 2{theta} is decreased. They indicate that the crystallinity is improved as the lattice damage is reduced and film density is increased. The tension test results confirm that, up to a certain h{sub f}, the strength of ITO can be significantly enhanced by improving the microstructures.

36 MATERIALS SCIENCE↗

Fabrication and physical properties of double perovskite SrLaVMoO{sub 6} thin films

SrLaVMoO{sub 6} thin films have been grown on various substrates by magnetron sputtering in Ar+H{sub 2} mixture gas. High-quality c-axis oriented SrLaVMoO{sub 6} films have been obtained in the growth temperature of 630 deg. C and Ar + 5% H{sub 2} mixture gas. The SrLaVMoO{sub 6} films showed low resistive metallic behavior, which is comparable to bulk SrLaVMoO{sub 6}. X-ray photoemission spectroscopy measurements indicate that the dominant valence state for Mo and V in the SrLaVMoO{sub 6} films is tetravalent (Mo{sup 4+}) and trivalent state (V{sup 3+}), respectively.

36 MATERIALS SCIENCE↗

High temperature magnetic properties of Fe{sub 81-x}Co{sub x}Ga{sub 19}/Si(100) films

Fe{sub 81-x}Co{sub x}Ga{sub 19} (with x ranging from 0 to 19 at.% Co) films with thicknesses of about 110 nm were deposited on Si(100) substrates by the dc magnetron sputtering method. The structures of these films at room temperature (RT) were analyzed by x-ray diffraction. Magnetic hysteresis loops of each film were measured from room temperature (RT) to 800 deg. C, and their saturation magnetization (4{pi}M{sub S}) and coercivity (H{sub C}) were plotted as a function of temperature (T). Saturation magnetostriction ({lambda}{sub S}) at RT was also measured. The substitution of Co for Fe would give rise to increases in H{sub C} and {lambda}{sub S}. In terms of high temperature magnetic properties, (A) we find that for each film, there is one low-temperature-phase Curie point (T{sub C1}) and one high-temperature-phase Curie point (T{sub C2}); (B) based on the temperature dependence of 4{pi}M{sub S}, we calculated the reduced hyperbolic Bessel function I{sub 5/2}(T); from the relationship {lambda}{sub S}(T)=I{sub 5/2}(T)x{lambda}{sub S}(RT), we can compare the performances of {lambda}{sub S}(T) at higher temperatures; and (C) H{sub C} decreases slightly as T increases initially, but it reaches a maximum when either T{sub C1} or T{sub C2} is approached. It is concluded that the Fe{sub 62}Co{sub 19}Ga{sub 19} film has the optimal high-temperature magnetic properties, including a larger {lambda}{sub S}(T), higher T{sub C1}, and moderate H{sub C}(T).

36 MATERIALS SCIENCE↗

Microstructure and ordering parameter studies in multilayer [FePt(x)/Os]{sub n} films

The microstructure, ordering parameter, and magnetic properties of multilayer [FePt(x)/Os]{sub n} films on glass substrate by dc-magnetron sputtering (with x being thickness in nm; Os with a fixed thickness 5 nm; n being the number of layers) have been studied as a function of the annealing temperatures between 300 and 900 deg. C. The grain size of multilayer films can be controlled by annealing temperature and thickness of the FePt layer with Os space layer. The coercivity as a function of the annealing temperature for samples with n = 1 and pure FePt behaves roughly saturated after annealing above 700 deg. C. However, for samples with n > 4 the value of H{sub c} seems still increasing with increasing annealing temperature between 600 and 900 deg. C, and the ordering parameter decreases with increasing the number of Os layers. Our experimental results are reasonably well to describe the effect of strain-assisted transformation.

36 MATERIALS SCIENCE↗

Investigation of the DSMC Approach for Ion/neutral Species in Modeling Low Pressure Plasma Reactor

Low pressure plasma reactors are important tools for ionized metal physical vapor deposition (IMPVD), a semiconductor plasma processing technology that is increasingly being applied to deposit Cu seed layers on semiconductor surfaces of trenches and vias with the high aspect ratio (e.g., >5:1). A large fraction of ionized atoms produced by the IMPVD process leads to an anisotropic deposition flux towards the substrate, a feature which is critical for attaining a void-free and uniform fill. Modeling such devices is challenging due to their high plasma density, reactive environment, but low gas pressure. A modular code developed by the Computational Optical and Discharge Physics Group, the Hybrid Plasma Equipment Model (HPEM), has been successfully applied to the numerical investigations of IMPVD by modeling a hollow cathode magnetron (HCM) device. However, as the development of semiconductor devices progresses towards the lower pressure regime (e.g., <5 mTorr), the breakdown of the continuum assumption limits the application of the fluid model in HPEM and suggests the incorporation of the kinetic method, such as the direct simulation Monte Carlo (DSMC), in the plasma simulation.The DSMC method, which solves the Boltzmann equation of transport, has been successfully applied in modeling micro-fluidic flows in MEMS devices with low Reynolds numbers, a feature shared with the HCM. Modeling of the basic physical and chemical processes for ion/neutral species in plasma have been developed and implemented in DSMC, which include ion particle motion due to the Lorentz force, electron impact reactions, charge exchange reactions, and charge recombination at the surface. The heating of neutrals due to collisions with ions and the heating of ions due to the electrostatic field will be shown to be captured by the DSMC simulations. In this work, DSMC calculations were coupled with the modules from HPEM so that the plasma can be self-consistently solved. Differences in the Ar results, the dominant species in the reactor, produced by the DSMC-HPEM coupled simulation will be shown in comparison with the original HPEM results. The effects of the DSMC calculations for ion/neutral species on HPEM plasma simulation will be further analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of sputtering power on the high frequency properties of nanogranular FeCoHfO thin films

Soft magnetic nanogranular FeCoHfO thin films were fabricated using rf magnetron sputtering in an oxygen/argon ambient. During the deposition process, the partial pressure of oxygen was fixed at 2.5% and sputtering power was used as the control parameter, varying from 50 to 300 W. It was found that the film electrical resistivity ({rho}) decreases steeply with the increase of sputtering power, and the saturation magnetization (4{pi}M{sub s}) and the natural ferromagnetic resonant frequency f{sub r} increase with increasing sputtering power from 50 to 200 W, and then decrease when sputtering power exceeded 200 W. The maximum value of 4{pi}M{sub s} and f{sub r} were 20.5 kG and 3.2GHz, respectively. The coercivity of films had a contrary trend compared with 4{pi}M{sub s} and f{sub r}, and its minimum value was about 1 Oe. The physical origin of the influence was suggested to be related to the structure and composition changes in films.

36 MATERIALS SCIENCE↗

Plasmonic excitations in ZnO/Ag/ZnO multilayer systems: Insight into interface and bulk electronic properties

Electron energy-loss spectroscopy experiments in transmission were carried out on silver-based multi-layer systems, consisting of a silver layer of various thicknesses (8, 10 and 50 nm) sandwiched between two Al-doped ZnO layers. The films were produced by magnetron sputtering using potassium bromide single crystals as substrates. The electronic structure of these systems was probed and analyzed with respect to their plasmonic excitations, which can be basically split up into excitations of the electrons in the bulk silver and excitations at the ZnO:Al/Ag interface. A detailed examination of the momentum dependence of the plasmon peaks revealed a positive dispersion for both, the volume and the interface plasmon, where only for the first one a quadratic behavior (as expected for a free electron gas) could be observed. Furthermore, the peak width was analyzed and set into relation to electrical conductivity measurements by calculating the plasmon lifetime and the electron scattering rate. Here, a good agreement between these different methods was obtained.

36 MATERIALS SCIENCE↗

Epitaxial growth and piezoelectric characterization of the (1-x)BiScO{sub 3}-(x)PbTiO{sub 3} ultrathin film

We studied ferroelectric properties of morphotropic phase boundary (1-x)BiScO{sub 3}-(x)PbTiO{sub 3} (BSPT, x = 0.64) epitaxial thin films on SrTiO{sub 3} (001) and Nb:SrTiO{sub 3} (001). BSPT thin films with various thicknesses were deposited using off-axis radio frequency magnetron sputtering. By analyzing x-ray data of BSPT thin films with various thicknesses, we confirmed that films thinner than {approx}22 nm were in a strained state. Films thicker than {approx}22 nm were in a relaxed state because of the strain relaxation mechanism caused by misfit dislocation formation. Clear piezoresponses and polarization reversal phenomena can be observed in the ultrathin limit down to 8 nm through Piezo Force Microscope experiments. The piezoresponse data as a function of thickness correlates with the structural modification of thin films.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of three-dimensional (La,Sr)MnO{sub 3} nanofilms on ZnO nanorod arrays

Three-dimensional (3D) cubic perovskite (La,Sr)MnO{sub 3} (LSMO) nanofilms have been deposited on ZnO nanorod arrays with controlled dimensionality and crystallinity by radio frequency (rf) magnetron sputtering and post thermal annealing. Compared to the two-dimensional (2D) LSMO nanofilm on flat Si, the structure and magnetic properties of 3D LSMO nanofilms on ZnO nanorod arrays have a strong anisotropic morphology and thickness dependence. Ferromagnetic property has been observed in both 2D and 3D LSMO nanofilms while a ferromagnetic-superparamagnetic transition was revaled in 3D LSMO nanofilms on ZnO nanorod array with decreasing nanofilm thickness, due to a large surface dispersion effect. The LSMO/ZnO nanofilm/nanorod structures could open up new avenues for intriguing magnetic properties studies and applications of nanoscale perovskites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗