Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Processes involved in the formation of silver clusters on silicon surface

We analyze scanning electron microscopy measurements for structures formed in the deposition of solid silver clusters onto a silicon(100) substrate and consider theoretical models of cluster evolution onto a surface as a result of diffusion and formation of aggregates of merged clusters. Scanning electron microscopy (SEM) data are presented in addition to energy dispersive X-ray spectrometry (EDX) measurements of the these films. Solid silver clusters are produced by a DC magnetron sputtering source with a quadrupole filter for selection of cluster sizes (4.1 and 5.6 nm or 1900 and 5000 atoms per cluster in this experiment); the energy of cluster deposition is 0.7 eV/atom. Rapid thermal annealing of the grown films allows analysis of their behavior at high temperatures. The results exhibit formation of cluster aggregates via the diffusion of deposited solid clusters along the surface; an aggregate consists of up to hundreds of individual clusters. This process is essentially described by the diffusion-limited aggregation (DLA) model, and thus a grown porous film consists of cluster aggregates joined by bridges. Subsequent annealing of this film leads to its melting at temperatures lower than to the melting point of bulk silver. Analysis of evaporation of this film at higher temperatures gives a binding energy in bulk silver of {epsilon}{sub 0}= (2.74 {+-} 0.03) eV/atom.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Elaboration, characterization of CrN- based coatings

Cr, CrN and CrAlN monolayers were synthesized by RF dual magnetron sputtering on AISI4140 steel and silicon substrates at 200 deg. C. Multilayers coatings based on the three mono-layers such as CrN/CrAlN and Cr/CrN/CrAlN were also synthesized only on Si. The physico-chemical and mechanical properties of the layers were determined by AFM, SEM+WDS, stress, roughness and nanoindentation measurements. The influence of the thickness on the mechanical properties of the monolayers stresses has been studied and as a consequence we compared the mono and multilayers stress state.

36 MATERIALS SCIENCE↗

Exchange Spring in a Heterostructure with Pd{sub 0.96}Fe{sub 0.04} Low-Temperature Ferromagnet

The exchange bias of the magnetic hysteresis loop and the exchange-spring effect have been observed in thin-film heterostructures comprising layers of Pd{sub 0.96}Fe{sub 0.04} low-temperature ferromagnet, metallic cobalt, and cobalt monoxide (CoO) grown on single-crystalline sapphire by methods of magnetron sputtering and molecular beam epitaxy in an ultrahigh-vacuum system. It is established that the exchange anisotropy of Pd{sub 0.96}Fe{sub 0.04} layer in Pd{sub 0.96}Fe{sub 0.04}/CoO/Co/Al{sub 2}O{sub 3} thin-film heterostructure is absent and the exchange-spring effect in this system is not manifested. In the case of a Pd{sub 0.96}Fe{sub 0.04}/Co/CoO/Al{sub 2}O{sub 3} structure, it is shown that, according to the results of magnetometric measurements, the inversion of the order of antiferromagnetic and ferromagnetic layers leads to pinning of the magnetic moment of Pd{sub 0.96}Fe{sub 0.04} layer at the interface with cobalt and to realization of the exchange-spring effect. Additional evidence in favor of this interpretation was obtained using the micromagnetic modeling of magnetic hysteresis loops.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Persistent photoconductivity due to trapping of induced charges in Sn/ZnO thin film based UV photodetector

Photoconductivity relaxation in rf magnetron sputtered ZnO thin films integrated with ultrathin tin metal overlayer is investigated. Charge carriers induced at the ZnO-metal interface by the tin metal overlayer compensates the surface lying trap centers and leads to the enhanced photoresponse. On termination of ultraviolet radiation, recombination of the photoexcited electrons with the valence band holes leaves the excess carriers deeply trapped at the recombination center and holds the dark conductivity level at a higher value. Equilibrium between the recombination centers and valence band, due to trapped charges, eventually stimulates the persistent photoconductivity in the Sn/ZnO photodetectors.

36 MATERIALS SCIENCE↗

Ion distribution measurements to probe target and plasma processes in electronegative magnetron discharges. II. Positive ions

Spectra of the ion mass and energy distributions of positive ions in reactive (Ar/O{sub 2}) and nonreactive (Ar) dc magnetron sputtering discharges have been investigated by energy-resolved mass spectrometry. The results of three sputter target materials, i.e., Cu, In, and W are compared to each other. Besides the main gas constituents, mass spectra reveal a variety of molecular ions which are dependent on the target material. In reactive mode, ArO{sup +} is always observed in Ar/O{sub 2} but molecules containing Ar and the metal were exclusively found for the Cu target. The occurrence of the different ions is explained in the context of their bond strengths obtained from density functional theory calculations. The energy spectra generally contain the known low-energy peak corresponding to the plasma potential. Differently extended high-energy tails due to sputtered material were observed for the different targets. Besides these, high-energetic ions were detected with up to several 100 eV. Their energies are significantly different for Ar{sup +} and O{sup +} with Ar{sup +} strongly depending on the target material. The spectra are discussed together with results from transport of ions in matter (TRIM) calculation to elucidate the origin of these energetic ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low dark current and high speed ZnO metal–semiconductor–metal photodetector on SiO{sub 2}/Si substrate

ZnO thin films are deposited by radio-frequency magnetron sputtering on thermally grown SiO{sub 2} on Si substrates. Pt/Au contacts are fabricated by standard photolithography and lift-off in order to form a metal-semiconductor-metal (MSM) photodetector. The dark current of the photodetector is measured as 1 pA at 100 V bias, corresponding to 100 pA/cm{sup 2} current density. Spectral photoresponse measurement showed the usual spectral behavior and 0.35 A/W responsivity at a 100 V bias. The rise and fall times for the photocurrent are measured as 22 ps and 8 ns, respectively, which are the lowest values to date. Scanning electron microscope image shows high aspect ratio and dense grains indicating high surface area. Low dark current density and high speed response are attributed to high number of recombination centers due to film morphology, deducing from photoluminescence measurements. These results show that as deposited ZnO thin film MSM photodetectors can be used for the applications needed for low light level detection and fast operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear current-voltage behavior of the isolated resistive switching filamentary channels in CuC nanolayer

Copper-doped amorphous carbon film was prepared by radio frequency reactive magnetron sputtering and their resistive switching behaviors were studied under a conductive atomic force microscope (cAFM). The repetitive scanning over the same area using cAFM with various bias voltages revealed that most of the isolated conductive paths were involved in resistive switching with asymmetric nonlinear I-V characteristics. The observed I-V behavior of nanoscale filamentary channels indicates that electron transfer mechanism of resistive switching filamentary channel in Pt/CuC/Pt is a tunneling between Cu filamentary channel and electrode through the solid electrolyte rather than conduction through fully connected Cu filamentary channel.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spin correlations and electron transport in MnBi:Au films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Au{sub x}Bi{sub 45} (x = 0, 4.5) thin films prepared by magnetron sputtering have been investigated. The magnetization of the MnBi films decreases and the coercivity increases due to Au doping. The temperature dependence of resistivity between 2 to 300 K shows that the films are metallic but the 4.5% Au-doped film shows a Kondo behavior with resistance minimum at 10.2 K. The magnetoresistance is anisotropic and the positive transverse magnetoresistance is significantly enhanced (16.3% at 70 kOe) by Au doping. We interpret these data in terms of a model in which Au atoms preferentially substitute for Mn atoms on the Mn lattice, and some Mn atoms are displaced to interstitial sites in the NiAs structure. These interstitial Mn atoms are coupled antiferromagnetically to the Mn atoms on the original Mn lattice leading to the large decrease in magnetization, Kondo effect, and the positive magnetoresistance.

36 MATERIALS SCIENCE↗

Optimization of Nb 3 Sn sputtering on SRF structures

Superconducting radiofrequency (SRF) cavities are the key technology to compact, high-efficiency, and cost-effective CW SRF accelerators. Further improvements in the efficiency can be realized by using novel materials such as Nb 3 Sn coated on the inner surface of SRF cavities. The Nb 3 Sn coatings enable cavity operation at 4 K, where the Nb 3 Sn coated cavities are already very efficient and have high intrinsic quality factors. Advances in Nb3Sn coatings on the inner surface of SRF cavities showed the potential for this material to significantly cut the capital and operating costs of SRF accelerators. Several approaches have been and are being investigated for coating SRF cavities with Nb 3 Sn. Magnetron sputtering is a versatile technique in that it has been shown to produce Nb 3 Sn films on flat Nb target in a single phase and a precisely controlled thickness, low defect levels, and a favorable morphology. Deposition of Nb 3 Sn films on SRF cavities have also shown promising RF superconducting properties. However, sputter coating of Nb 3 Sn on SRF cavities requires further development to be used in accelerators.

43 PARTICLE ACCELERATORS↗

Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition

The chemistry, microstructure, and catalytic activity of thin films incorporating palladium were studied using scanning and transmission electron microscopies, X-ray diffraction, spectrophotometry, 4-point probe and catalytic tests. The films were synthesized using pulsed filtered cathodic arc and magnetron sputter deposition, i.e. techniques far from thermodynamic equilibrium. Catalytic particles were formed by thermally cycling thin films of the Pd-Pt-O system. The evolution and phase formation in such films as a function of temperature were discussed in terms of the stability of PdO and PtO2 in air. The catalytic efficiency was found to be strongly affected by the chemical composition, with oxidized palladium definitely playing a major role in the combustion of methane. Reactive sputter deposition of thin films in the Pd-Zr-Y-O system allowed us forming microstructures ranging from nanocrystalline zirconia to palladium nanoparticles embedded in a (Zr,Y)4Pd2O matrix. The sequence of phase formation is put in relation to simple thermodynamic considerations.

36 MATERIALS SCIENCE↗

Structure-property relationship of nanocrystalline Pr{sub 2}Co{sub 14}B-based hard magnetic film

Nanocrystalline Pr{sub 2}Co{sub 14}B-based films are deposited on two types of substrates at 600 deg. C by radio frequency magnetron sputtering. All samples are composed of a hard magnetic phase Pr{sub 2}Co{sub 14}B and a small amount of a soft magnetic phase Co{sub 3}B. The film sputtered on the thermally oxidized silicon wafer has a more dispersed distribution of Co{sub 3}B and a smaller average grain size of Pr{sub 2}Co{sub 14}B than that deposited on alumina substrates; therefore, the former film shows a stronger intergrain exchange coupling action (IECA) than the latter film. In addition, the coercivity (8.6 kOe) and ratio (0.68) of remanence to saturation magnetization of the film sputtered on thermally oxidized silicon wafers are considerably higher than those (0.4 kOe and 0.56) of the film deposited on alumina substrates. In the case of the film sputtered on alumina substrates, the size of most magnetic domains is comparable to the average grain size of magnetic phases, implying the occurrence of a weak IECA. However, in the case of the film sputtered on thermally oxidized silicon wafers, the size of most magnetic domains is considerably larger than the mean grain size of magnetic phases, indicating the occurrence of a strong IECA. The effect of the IECA on the coercivity of specimens is determined by analyzing the temperature dependence of coercivity in the framework of a nucleation model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The crystallinity and mechanical properties of indium tin oxide coatings on polymer substrates

We present the relationship between the microstructure and mechanical strength of indium tin oxide (ITO) on flexible substrates. With varying thickness (h{sub f}), ITO is deposited on polyethylene terephthalate (PET) by dc magnetron sputtering. The microstructure of ITO is controlled by substrate surface conditions and sputtering parameters. The maximum substrate temperature during deposition is limited to 80 deg. C due to the low glass transition temperature (T{sub g}) of PET. The crystallinity and surface roughness (R{sub rms}) are analyzed by high resolution x-ray diffraction, high resolution transmission electron microscopy, and AFM. The crack resistance of ITO is evaluated by uniaxial tension test. The experimental results reveal that, at a fixed h{sub f}, the degree and quality of crystallinity of ITO are highly improved by increasing sputtering power and the substrate temperature. As the crystallinity is improved, the ratio of preferred growth orientations of (222) to (400) is increased and the degree of peak shifts to lower 2{theta} is decreased. They indicate that the crystallinity is improved as the lattice damage is reduced and film density is increased. The tension test results confirm that, up to a certain h{sub f}, the strength of ITO can be significantly enhanced by improving the microstructures.

36 MATERIALS SCIENCE↗

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} thin films prepared by a low temperature process

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} (BFO) thin films have been deposited on platinized silicon substrates by a low temperature process combining rf magnetron sputtering at room temperature and postdeposition annealing at 450 deg. C. A nearly pure tetragonal crystal structure with highly (201)-preferred orientation, determined by x-ray diffraction, was formed in the BFO thin film. The BFO film not only exhibits high dielectric permittivity ({epsilon}{sub r}=113) and relatively low loss tangent (tan {delta}=0.012), but also shows a fairly small quadratic voltage coefficient of capacitance ({alpha}{approx}800 ppm/V{sup 2}) and a small temperature coefficient of capacitance ({alpha}{sub T{approx}}790 ppm/deg. C). Moreover, the leakage current density, obeying the Fowler-Nordheim tunneling mechanism, remains at a reasonably low level with the increase in applied electric field (J{approx}10{sup -6}-10{sup -4} A/cm{sup 2} under E=400 kV/cm). These attractive dielectric and electrical properties make the low temperature processed Bi{sub 24}Fe{sub 2}O{sub 39} thin film a promising candidate for high-k dielectric applications in silicon-based integrated circuits.

36 MATERIALS SCIENCE↗

Oxidation resistance of quintuple Ti-Al-Si-C-N coatings and associated mechanism

The oxidation behavior of Ti-Al-Si-C-N hard coatings with different Al contents deposited on high-speed steel and Si substrates by hybrid arc-enhanced magnetron sputtering is investigated in the temperature range of 500 Degree-Sign C-1000 Degree-Sign C. The coating hardness is maintained at around 35 GPa, and the parabolic oxidation rate constant K{sub p} at 1000 Degree-Sign C decreases to 3.36 Multiplication-Sign 10{sup -10} kg{sup 2} m{sup -4} s{sup -1} when the Al concentration is increased to 30 at. %, indicating that Ti-Al-Si-C-N coatings with larger Al concentrations have better oxidation resistance. X-ray diffraction, cross-sectional scanning electron microscopy, and x-ray photoelectron spectroscopy reveal a protective surface layer consisting of Al{sub 2}O{sub 3}, TiO{sub 2}, and SiO{sub 2} that retards inward oxygen diffusion. A mechanism is proposed to elucidate the oxide formation. As a consequence of the good oxidation resistance, the Ti-Al-Si-C-N coatings have a large potential in high-speed dry cutting as well as other high temperature applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-layer mirrors for advanced research light sources

X-ray mirrors are needed for beam guidance, beam alignment and monochromatisation at third-generation synchrotron light sources (PETRA III) and forthcoming Free-Electron Lasers (LCLS, European XFEL). Amorphous carbon coatings are currently used as total reflection mirrors at FLASH to guide the photon beam to the various beamlines. These coatings were prepared by means of magnetron sputtering. The new GKSS sputtering facility for the deposition of single and multilayer mirrors with a length of up to 1500 mm and a width of up to 120 mm is in operation. In this contribution we present the results of this new deposition system. A major advantage is that it is now possible to prepare one, two or more mirrors with similar properties over the whole deposition length. The mirror properties were investigated by means of X-ray reflectometry and interference microscopy. The performance of the mirrors is analyzed, considering X-ray reflectivity, film thickness and surface roughness. The uniformity of these properties over the whole deposition length of 1500 mm is demonstrated. The results obtained will be discussed and compared with former results.

43 PARTICLE ACCELERATORS↗

Suppression of superconductivity in epitaxial NbN ultrathin films

This paper studies the suppression of superconducting transition temperature (T{sub c}) of ultrathin NbN film. We fabricated epitaxial NbN superconducting thin films of thicknesses ranging from 2.5 to 100 nm on single crystal MgO (100) substrates by dc magnetron sputtering. We performed structure analyses and measured their electric and far infrared properties. The experimental results were compared with several mechanisms of the suppression of superconductivity proposed in the literature, including the weak localization effect, the proximity effect, and quantum size effect (electron wave leakage model). We found that the electron wave leakage model matches best to the experimental data.

36 MATERIALS SCIENCE↗

Fully epitaxial Fe/MgO/Fe(001) junctions with nonmagnetic metal layer insertion

Fully epitaxial Fe/Ag-wedge/MgO/Fe(001) magnetic tunnel junctions (MTJs) were prepared by using a combination of magnetron sputtering and molecular beam epitaxy, and their magneto-transport properties were investigated for the Ag thickness range of 0-9 monolayer (ML). The large tunneling magnetoresistance (TMR) ratios of up to 160% at room temperature were obtained in the Fe/MgO/Fe region (Ag: 0 ML) after the optimization of the preparation conditions. The finite TMR ratio was observed until the Ag thickness reached 4 ML, although no significant oscillation due to quantum well states (QWS) was seen. This is the first demonstration of TMR in the fully epitaxial MTJs with nonmagnetic metal layer insertion which can potentially create spin-dependent QWS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films

The effect of substrate temperature on the crystallographic texture and surface morphology of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} deposited by rf magnetron sputtering on (111) oriented Pt (150 nm)/Ti (10 nm)/SiO{sub 2} (300 nm)/Si (100) substrates is reported. The onset of crystallinity is observed above 500 deg. C, beyond which all films are oriented along the (111) plane up to a temperature of 800 deg. C. Over this temperature range, the misfit strain and root mean square roughness (rms{sub roughness}) peak at 600 deg. C, decreasing beyond this peak value. The tunability of the dielectric constant at 100 kHz is highest (60% for a field strength of 300 kV/cm) at the lowest values of rms{sub roughness} and misfit strain and decreases as these values increase. It is also shown that the morphology of the Pt underlayers is strongly affected by the processing conditions. This in turn influences the tunable behavior of the BST films as much as the substrate temperature during growth and the consequent microstructural variations.

36 MATERIALS SCIENCE↗