Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laboratory procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Prediction of pressure during evacuation of multilayer insulation.

Description of an improved analytical procedure for predicting the pressure time history during evacuation of multilayer-insulation thermal-protection systems. To evaluate the performance of the proposed analysis and to demonstrate its usefulness as a design tool, a comparison is presented of the experimentally measured and predicted evacuation pressure histories for a laboratory-scale model multilayer insulation blanket.

Glassford, A. P. M.↗
NASA NTRS1978

Ride quality criteria of multifactor environments

The paper describes a comprehensive ride quality model that accounts for the effects of multifrequency and multitaxis vibration inputs as well as the interactive effects of noise and vibration upon passenger discomfort. The model is based on extensive experimental studies involving a realistic multi-degree-of-freedom laboratory simulator, and data relating to human discomfort response to vertical, lateral, and roll vibrations are presented. Results of studies involving vibration stimuli are expressed by sets of equal discomfort curves for each of three axes of vibration. A set of noise-vibration curves are obtained by an additive procedure, shown to be valid in the range under consideration, which combines the discomfort components due to noise and vibration. Other results from the study of human response to combined noise and vibration stimuli are reported.

Leatherwood, J. D.↗
NASA NTRS1979

Development and Evaluation of Elastomeric Materials for Geothermal Applications

A material was formulated having about 250-350 psi tensile strength and 30-80 percent elongation at 260 C for at least 24 hours in simulated brine. The relationship between these laboratory test results and sealing performance in actual or simulated test conditions is not entirely clear; however, it is believed that no conventional formation or casing packer design is likely to perform well using these materials. The synthetic effort focused on high temperature block copolymers and development of curable polystyrene. Procedures were worked out for synthesizing these new materials. Initial results with heat-cured unfilled polystyrene 'gum' at 260 C indicate a tensile strength of about 50 psi. Cast films of the first sample of polyphenyl quinoxaline-polystyrene block copolymer, which has 'graft-block' structure consisting of a polystyrene chain with pendant polyphenyl quinoxaline groups, show elastomeric behavior in the required temperature range. Its tensile strength and elongation at 260 C were 220-350 psi and 18-36 percent, respectively. All of these materials also showed satisfactory hydrolytic stability.

Mueller, W. A.↗
NASA NTRS1989

A study on the sensitivity and simultaneous adjustment of a hoop-column antenna surface

The results of a recent surface adjustment of the 15-meter diameter hoop-column antenna are presented. A least-squares differential algorithm is used to adjust the surface shape as close as possible to a perfect parabola. Since the desired perfect parabola is not uniquely known a priori, parameters of the perfect parabola are included in the design vector along with the cable length changes. As an extension to an earlier study, lateral sensitivity is included in the least-squares adjustment procedure. In addition, the effect of cable length uncertainties on the surface RMS error is considered and an error bound is derived. The results in this study indicate an improvement over earlier studies. The sensitivity analysis provided a quantitative measure of the needed accuracy of the cable adjustments in the laboratory. Recommendations are included to further enhance shape adjustment.

Lim, Kyong Been↗
NASA NTRS1992

Measuring ocean coherence time with dual-baseline interferometry

Using the Jet Propulsion Laboratory (JPL) Airborne Synthetic Aperture Radar (AIRSAR) interferometer, measurements of the ocean coherence time at L and C band can be made at high spatial resolution. Fundamental to this measurement is the ability to image the ocean interferometrically at two different time-lags, or baselines. By modifying the operating procedure of the existing two antenna interferometer, a technique was developed make these measurements. L band coherence times are measured and presented.

Carande, Richard E.↗
NASA NTRS1999

ISS Operations for the Special Purpose Dexterous Manipulator (SPDM) Experiences from the Robotic Systems Evaluation Laboratory (RSEL)

The International Space Station (ISS) will present a new era of telerobotic operations on-orbit. Operating the Special Purpose Dexterous Manipulator (SPDM) in its tasks of maintaining the multitude of Space Station Orbital Replaceable Units (ORUs) creates numerous operational considerations not seen in the existing Shuttle Remote Manipulator System (SRMS) or the future Space Station Remote Manipulator System (SSRMS). The differences between the large arms and the dexterous arm greatly affect the interconnection of man, robot, and task. This paper presents some of the issues arising from this new breed of on-orbit robotics as garnered from over three years of ORU testing experience within the Robotic Systems Evaluation Laboratory (RSEL) at NASA Johnson Space Center. The effects of new robotic features on operations, the issues surrounding targets and visual cues, the differences in operating with Force Moment Accommodation (FMA), the effects of changes in task complexity and scale, the lack of supporting flight information, and the changes in procedures required by the dexterous task will be discussed.

Spinler, Anthony B.↗
NASA NTRS2006

Spacecraft charging requirements and engineering issues

An effort is currently underway to recast and combine two NASA guidelines for mitigating the effects of spacecraft charging and electrostatic discharge on spacecraft. The task has the goal of taking the existing NASA guidelines for preventing surface electrostatic charging, NASA-TP-2361 (Purvis et al., 1984), and internal electrostatic charging, NASAHDBK 4002 (Whittlesey, 1999), and bringing them up to date with recent laboratory and onorbit findings. This paper will describe the status of those on-going efforts to combine and update the two guidelines. Reasons for the upgrades will be presented, including new subject material for which there is now a greater understanding or a greater need which changes satellite design procedures, or both. There will be an emphasis on the proposed contents and on the differences and similarities between surface and internal charging mitigation techniques. In addition, the mitigation requirements that can be derived from the combined handbook will be discussed with emphasis on how they might affect the engineering design and testing of future spacecraft.

charging guidelines↗
DOE OSTI2025

Blinding scheme for the scale-dependence bias signature of local primordial non-Gaussianity for DESI 2024

The next generation of spectroscopic surveys is expected to achieve an unprecedented level of accuracy in the measurement of cosmological parameters. To avoid confirmation bias and thereby improve the reliability of these results, blinding procedures become a standard practice in the cosmological analyses of such surveys. Blinding is especially crucial when the impact of observational systematics is important relative to the cosmological signal, and a detection of that signal would have significant implications. This is the case for local primordial non-gaussianity, as probed by the scale-dependent bias of the galaxy power spectrum at large scales that are heavily sensitive to the dependence of the target selection on the imaging quality, known as imaging systematics. We propose a blinding method for the scale-dependent bias signature of local primordial non-gaussianity at the density field level which consists in generating a set of weights for the data that replicate the scale-dependent bias. The applied blinding is predictable, and can be straightforwardly combined with other catalog-level blinding procedures that have been designed for the baryon acoustic oscillation and redshift space distortion signals. The procedure is validated through simulations that replicate data from the first year of observation of the Dark Energy Spectroscopic Instrument, but may find applications to other upcoming spectroscopic surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Fabrication and Test of C3a: A Six-Layer Subscale Canted $\cos \theta$ Dipole Magnet Using High-Temperature Superconducting corc Wires

REBCO coated conductors have a strong potential for high-field magnet applications. The REBCO technology, however, is still in its infancy for accelerator magnet applications. As part of the U.S. Magnet Development Program (MDP), we developed a six-layer canted cos θ dipole magnet, C3a, using CORC® wires developed by Advanced Conductor Technologies LLC. All the layers were wound using a semi-automated winding machine. Three layers of the magnet used CORC® wires containing the SuperPower “AP” REBCO tapes and the remaining layers used the wires containing the “HM” tapes. At 77 K, both kinds of CORC® wires showed 5% to 10% degradation, after bending to a minimum bend radius of 30 or 35 mm, with respect to the self-field critical current measured before winding. At 4.2 K, the magnet reached 9.5 kA at a ramp rate of 9 A s -1 and generated a dipole field of 1.4 T. Further, the critical current of one layer degraded by 4% after a current transient up to 10.5 kA ramped in an averaged rate of 175 kA s -1 or 20 T s -1 . We confirmed the HM CORC® wire can carry a higher current than the AP CORC® wire at 4.2 K. The test results of the C3a magnet showed that the fabrication and assembly procedure can be used for the upcoming full-scale C3 magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

MARSAME Radiological Release Report for Diamond Drive Widening and Roundabout Construction Projects

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has determined that only a portion of the soil associated with the Diamond Drive Widening/Roundabout Projects (Figure 1) meets the criteria for unrestricted release to the public under Department of Energy (DOE) Order 458.1, Radiation Protection for the Public and the Environment (DOE, 2020). The remaining soil did not meet the criteria for unrestricted release and must be managed appropriately. These conclusions are based on the known history of the area combined with soil sample data collected in 2022; the findings are consistent with DOE Order 458.1 and Los Alamos National Laboratory (LANL) Functional Series Document EPC-ES-FSD-004, Environmental Radiation Protection (LANL, 2021). Sampling and data analysis, as described in this report, were sufficient to meet measurement quality objectives (MQOs) under the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) manual (NUREG, 2009) and LANL procedures (LANL, 2020). Final approvals for waste disposition will come from LANL’s Waste Management Program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Assessing the Current State of U.S. Energy Equity Regulation and Legislation [Slides]

This report examined state energy equity actions from January 2020 to July 2022. Lawrence Berkeley National Laboratory and Pacific Northwest National Laboratory partnered with E9 Insight to screen executive, legislative, and regulatory actions focusing on energy equity. A total of 95 actions were identified across 22 states and Washington, DC. Energy equity was most associated with resource planning, decarbonization, and energy efficiency regulatory focus areas. States tended to focus on distributive and procedural justice tenets over recognition and restorative justice tenets. The review also suggested that energy equity metrics are in nascent stages; most outcomes identified in equity actions did not have corresponding metrics. Affordability and energy burden were identified as metrics in multiple cases and appeared in several different forms.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

MARSAME Radiological Release Report for Replacement Water Lines from TA-48 to TA-55

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has determined that only a portion of the soil associated with Replacement Water Lines from Technical Area (TA)-48 to TA55 (Figure 1) meets the criteria for unrestricted release to the public under Department of Energy (DOE) Order 458.1, Radiation Protection for the Public and the Environment (DOE, 2020). The remaining soil did not meet the criteria for unrestricted release and must be managed appropriately. These conclusions are based on the known history of the area combined with soil sample data collected in 2022; the findings are consistent with DOE Order 458.1 and Los Alamos National Laboratory (LANL) Functional Series Document EPC-ES-FSD-004, Environmental Radiation Protection (LANL, 2021). Sampling and data analysis, as described in this report, were sufficient to meet measurement quality objectives (MQOs) under the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) manual (NUREG, 2009) and LANL procedures (LANL, 2020). Final approvals for waste disposition will come from LANL’s Waste Management Program.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

MARSAME Radiological Release Report for Diamond Drive Widening and Roundabout Construction Projects, Revision 1

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has determined that the soil, concrete and asphalt associated with the Diamond Drive Widening/Roundabout Projects (Figure 1) meets the criteria for unrestricted release to the public under Department of Energy (DOE) Order 458.1, Radiation Protection for the Public and the Environment (DOE, 2020). These conclusions are based on the known history of the area combined with soil sample data collected in 2022; the findings are consistent with DOE Order 458.1 and Los Alamos National Laboratory (LANL) Functional Series Document EPC-ES-FSD-004, Environmental Radiation Protection (LANL, 2021). Sampling and data analysis, as described in this report, were sufficient to meet measurement quality objectives (MQOs) under the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) manual (NUREG, 2009) and LANL procedures (LANL, 2020). Final approvals for waste disposition will come from LANL’s Waste Management Program.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

MARSAME Radiological Release Report for Weapons Facility Operations #5 Decontamination and Demolition Project

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has identified materials associated with Weapons Facility Operations (WFO) #5 that meet the criteria for unrestricted release to the public under Department of Energy (DOE) Order 458.1, Radiation Protection for the Public and the Environment (DOE, 2020) and materials in one building that did not meet the criteria for unrestricted release and are to be treated as low level waste (LLW). These conclusions are based on the known history of the area combined with radiation survey data data collected in 2022 and 2023. The findings are consistent with DOE Order 458.1 and Los Alamos National Laboratory (LANL) Functional Series Document EPC-ES-FSD-004, Environmental Radiation Protection (LANL, 2021). Sampling and data analysis, as described in this report, were sufficient to meet measurement quality objectives (MQOs) under the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) manual (NUREG, 2009) and LANL procedures (LANL, 2020). Final approvals for waste disposition will come from LANL’s Waste Management Program.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

MARSAME Radiological Release Report for Weapons Facility Operations #4 Decontamination and Demolition Project: TA-14-0005, TA-15-0009, TA-15-0202, TA-15-0233, TA-36-0019

Environmental Protection and Compliance, Environmental Stewardship (EPC-ES) has identified materials associated with Weapons Facility Operations (WFO) #4 that meet the criteria for unrestricted release to the public under Department of Energy (DOE) Order 458.1, Radiation Protection for the Public and the Environment (DOE, 2020) and materials in one building that do not meet the criteria for unrestricted release and are to be treated as low level waste (LLW). These conclusions are based on the known history of the buildings combined with radiation survey data data collected in 2022 and 2023. The findings are consistent with DOE Order 458.1 and Los Alamos National Laboratory (LANL) Functional Series Document EPC-ES-FSD-004, Environmental Radiation Protection (LANL, 2021). Sampling and data analysis, as described in this report, were sufficient to meet measurement quality objectives (MQOs) under the Multi-Agency Radiation Survey and Assessment of Materials and Equipment (MARSAME) manual (NUREG, 2009) and LANL procedures (LANL, 2020). Final approvals for waste disposition will come from LANL’s Waste Management Program. The scope of this final release report includes Technical Area (TA) 14 Building 5 (TA-14-0005), TA-15 Buildings 9, 202, and 233 (TA-15-0009/0202/0233), and TA-36 Building 19 (TA-36-0019). MARSAME provides guidance on statistical sampling for residual radionuclides in bulk materials; smaller, miscellaneous items can be released via the release procedures outlined in LANL Policy 121 Radiation Protection (LANL, 2023).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Assessing the Current State of U.S. Energy Equity Regulation and Legislation [Slides]

This report examined state energy equity actions from January 2020 to July 2022. Lawrence Berkeley National Laboratory and Pacific Northwest National Laboratory partnered with E9 Insight to screen executive, legislative, and regulatory actions focusing on energy equity. A total of 95 actions were identified across 22 states and Washington, DC. Energy equity was most associated with resource planning, decarbonization, and energy efficiency regulatory focus areas. States tended to focus on distributive and procedural justice tenets over recognition and restorative justice tenets. The review also suggested that energy equity metrics are in nascent stages; most outcomes identified in equity actions did not have corresponding metrics. Affordability and energy burden were identified as metrics in multiple cases and appeared in several different forms.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Safeguards Technology Program FY2026 Mid-Year Report for Project WBS# 24.1.3.3: Development of Procedures for Th-U Radiochronometry of Uranium Particles by LG-SIMS

Implementing 230 Th- 234 U radiochronometry of environmental uranium particles by large geometry secondary ion mass spectrometry (LG-SIMS) requires assessment, validation, and technical support before safeguards conclusions can be drawn from the information. This project investigates the most challenging aspects of LG-SIMS particle radiochronometry 230 Th- 234 U measurements through a collaboration between LANL and NIST, to provide best practices and procedures for determining high quality ages with optimized uncertainties. This includes exploration of reducing detector backgrounds, investigating the best ways to report uncertainties, and establishing recommended instrument setups.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Protocols for Assessing Transformation Rates of Nitrous Oxide in the Water Column

Nitrous oxide (N 2 O) is a potent greenhouse gas and an ozone destroying substance. Yet, clear step-by-step protocols to measure N 2 O transformation rates in freshwater and marine environments are still lacking, challenging inter-comparability efforts. Here we present detailed protocols currently used by leading experts in the field to measure water-column N 2 O production and consumption rates in both marine and other aquatic environments. We present example 15 N-tracer incubation experiments in marine environments as well as templates to calculate both N 2 O production and consumption rates. We discuss important considerations and recommendations regarding (1) precautions to prevent oxygen (O 2 ) contamination during low-oxygen and anoxic incubations, (2) preferred bottles and stoppers, (3) procedures for 15 N-tracer addition, and (4) the choice of a fixative. We finally discuss data reporting and archiving. We expect these protocols will make 15 N-labeled N 2 O transformation rate measurements more accessible to the wider community and facilitate future inter-comparison between different laboratories.

15N-tracer incubations↗