Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LASER OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Narrowband Raman fibre laser based on a dual-core optical fibre with FBGs inscribed by femtosecond radiation

The characteristics of Raman lasers based on a dual-core optical fibre are presented. Fibre Bragg gratings (FBGs), selectively inscribed in chosen cores by femtosecond radiation, are used as cavity mirrors. The laser configuration is optimised with respect to the output FBG reflectivity. The possibility of additional spectral filtering, based on the formation of a Michelson interferometer in the laser cavity by inscribing a pair of FBGs in different cores, is demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dual-pump CARS temperature and major species concentration measurements in counter-flow methane flames using narrowband pump and broadband Stokes lasers

Dual-pump coherent anti-Stokes Raman scattering (CARS) is used to measure temperature and species profiles in representative non-premixed and partially-premixed CH{sub 4}/O{sub 2}/N{sub 2} flames. A new laser system has been developed to generate a tunable single-frequency beam for the second pump beam in the dual-pump N{sub 2}-CO{sub 2} CARS process. The second harmonic output ({proportional_to}532 nm) from an injection-seeded Nd:YAG laser is used as one of the narrowband pump beams. The second single-longitudinal-mode pump beam centered near 561 nm is generated using an injection-seeded optical parametric oscillator, consisting of two non-linear {beta}-BBO crystals, pumped using the third harmonic output ({proportional_to}355 nm) of the same Nd:YAG laser. A broadband dye laser (BBDL), pumped using the second harmonic output of an unseeded Nd:YAG laser, is employed to produce the Stokes beam centered near 607 nm with full-width-at-half-maximum of {proportional_to}250 cm{sup -1}. The three beams are focused between two opposing nozzles of a counter-flow burner facility to measure temperature and major species concentrations in a variety of CH{sub 4}/O{sub 2}/N{sub 2} non-premixed and partially-premixed flames stabilized at a global strain rate of 20 s{sup -1} at atmospheric-pressure. For the non-premixed flames, excellent agreement is observed between the measured profiles of temperature and CO{sub 2}/N{sub 2} concentration ratios with those calculated using an opposed-flow flame code with detailed chemistry and molecular transport submodels. For partially-premixed flames, with the rich side premixing level beyond the stable premixed flame limit, the calculations overestimate the distance between the premixed and the non-premixed flamefronts. Consequently, the calculated temperatures near the rich, premixed flame are higher than those measured. Accurate prediction of the distance between the premixed and the non-premixed flames provides an interesting challenge for future computations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherently pulsed laser source

An electronically controllable apparatus is described which modulates a continuous wave laser beam so as to produce an output beam consisting of coherent pulses that are electronically controllable as to both pulse repetition rate and pulse width. The apparatus includes two acoustic devices positioned so that the laser beam passes through them in sequence, and apparatus for passing sound waves through the devices to frequency shift the laser radiation as well as to diffract it. Each acoustic device generates sound waves containing a group of frequencies which result in spaced pulses. The first acoustic device is countered by the second acoustic device to produce a collimated, coherently pulsed, laser beam.

Margolis, J. S.↗

Special Section Guest Editorial: Laser Damage

Laser damage of optical materials, first reported in 1964, continues to limit the output energy and power of pulsed and continuous-wave laser systems. In spite of some 48 years of research in this area, interest from the international laser community to laser damage issues remains at a very high level and does not show any sign of decreasing. Moreover, it grows with the development of novel laser systems, for example, ultrafast and short-wavelength lasers that involve new damage effects and specific mechanisms not studied before. This interest is evident from the high level of attendance and presentations at the annual SPIE Laser Damage Symposium (aka, Boulder Damage Symposium) that has been held in Boulder, Colorado, since 1969. This special section of Optical Engineering is the first one devoted to the entire field of laser damage rather than to a specific part. It is prepared in response to growing interest from the international laser-damage community. Some papers in this special section were presented at the Laser Damage Symposium; others were submitted in response to the general call for papers for this special section. The 18 papers compiled into this special section represent many sides of the broad field of laser-damage research. They consider theoretical studies of the fundamental mechanisms of laser damage including laser-driven electron dynamics in solids (O. Brenk and B. Rethfeld; A. Nikiforov, A. Epifanov, and S. Garnov; T. Apostolova et al.), modeling of propagation effects for ultrashort high-intensity laser pulses (J. Gulley), an overview of mechanisms of inclusion-induced damage (M. Koldunov and A. Manenkov), the formation of specific periodic ripples on a metal surface by femtosecond laser pulses (M. Ahsan and M. Lee), and the laser-plasma effects on damage in glass (Y. Li et al). Material characterization is represented by the papers devoted to accurate and reliable measurements of absorption with special emphasis on thin films (C. Mühlig and S. Bublitz; B. Cho, E. Danielewicz, and J. Rudisill; W. Palm et al; and J. Lu et al.). Statistical treatment of measurements of the laser-damage threshold (J. Arenberg) and the relationship to damage mechanisms (F. Wagner et al.) represent the large subfield of laser-damage measurements. Various aspects of multilayer coating and thin-film characterization are considered in papers by B. Cho, J. Rudisill, and E. Danielewicz (spectral shift in multilayer mirrors) and R. Weber et al. (novel approach to damage studies based on third-harmonic generation microscopy). Of special interest for readers is the paper by C. Stolz that summarizes the results of four “thin-film damage competitions” organized as a part of the Laser Damage Symposium. Another paper is devoted to thermal annealing of damage precursors (N. Shen et al.). Finally, the influence of nano-size contamination on initiation of laser damage by ultrashort pulses is considered in paper of V. Komolov et al.

42 ENGINEERING↗

Injection Seeding Of A Q-Switched Alexandrite Laser

Experiment demonstrates that standing-wave, Q-switched, tunable alexandrite laser can be injection-seeded to increase stability of output frequency and significantly reduce bandwidth from 750 GHz to 180 MHz. Injecting laser acts as oscillator or master, while Q-switched laser into which ouput of seed laser injected acts as amplifier or slave.

Zukowski, Barbara J. K.↗

Free-electron laser driven by the LBNL laser-plasma accelerator

A design of a compact free-electron laser (FEL), generating ultra-fast, high-peak flux, XUV pulses is presented. The FEL is driven by a high-current, 0.5 GeV electron beam from the Lawrence Berkeley National Laboratory (LBNL) laser-plasma accelerator, whose active acceleration length is only a few centimeters. The proposed ultra-fast source ({approx}10 fs) would be intrinsically temporally synchronized to the drive laser pulse, enabling pump-probe studies in ultra-fast science. Owing to the high current (> or approx.10 kA) of the laser-plasma-accelerated electron beams, saturated output fluxes are potentially greater than 10{sup 13} photons/pulse. Devices based both on self-amplified spontaneous emission and high-harmonic generated input seeds, to reduce undulator length and fluctuations, are considered.

43 PARTICLE ACCELERATORS↗

High-pulse-repetition-rate UV lasers with the inductance-capacitance discharge stabilisation

Compact high-pulse-repetition-rate XeF and KrF excimer lasers and an N{sub 2} laser with plate electrodes and the inductive-capacitance discharge stabilisation are studied. The composition and pressure of the active medium of lasers are optimised for obtaining the maximum output energy and maximum pulse repetition rate at comparatively low (no more than 19 m s{sup -1}) active-medium flow rates in the interelectrode gap. The pulse repetition rate achieved 4-5 kHz for the relative root-mean-square deviation of the laser pulse energy less than 2%. It is found that the energy of the N{sub 2}-laser pulses changes periodically under the action of acoustic perturbations appearing at high pulse repetition rates. It is shown that the use of the inductance-capacitance stabilisation of the discharge provides the increase in the maximum pulse repetition rate by 0.5-1.5 kHz (depending on the active medium type). It is found that the stability of the output energy and maximum pulse repetition rate depend on the location of preionisation sparks with respect to the gas flow direction. Some ways for the development of the technology of plate electrodes and inductance-capacitance discharge stabilisation are proposed. (lasers)

42 ENGINEERING↗

Quasi-cw 808-nm 300-W laser diode arrays

Samples of 808-nm quasi-cw laser diode arrays (LDAs) with an output power exceeding 300 W, a pulse duration of 200 μs, and a pulse repetition rate of 100 Hz are developed and fabricated. The main output parameters of a set of five LDAs, including light – current characteristics, current – voltage characteristics, and emission spectra are measured. Preliminary life tests show that the LDA power remains stable for 10{sup 8} pulses. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of the continuous wave neutral argon laser.

Study of the characteristics of the CW neutral argon IR laser, using a variety of techniques. The output power enhancement effects of helium and chlorine gases are measured, and the reasons for the enhancement are determined. The gain is measured for the 2.397-, 2.208-, 2.062-, and 1.792-micron laser lines, using an internal cavity-loss method and a single-pass amplifier method. In addition, the saturation intensity is measured, and competition effects are studied. It is concluded that helium aids excitation of the upper laser levels by producing a significant increase in the electron temperature. Chlorine is shown to aid deexcitation of the lower laser levels by partially depopulating the metastable argon 4s levels that lie just below them.

Dauger, A. B.↗

High power CW iodine laser pumped by solar simulator

An iodine photodissociation laser was pumped by a long Ar arc as the solar simulator to produce a 10-W CW output. Continuous lasing for 1 h was achieved with a flow of the laser material n-C3F7I. The 10-W CW output is the highest produced to date and establishes the feasibility of developing a solar-pumped laser for space power transmission.

Lee, Ja H.↗

Laser-Compton Gamma-Ray Source at a Beamline (BL1) in NewSUBARU

We have developed a laser-Compton gamma-ray source at beamline (BL1) in NewSUBARU, an electron storage ring operating at electron energies of 0.7-1.5 GeV. Initially, we generated 17-37 MeV gamma rays using a Nd:YVO{sub 4} laser operating at 1.06 {mu}m and 0.53 {mu}m, achieving a luminosity of 6000 photons/(W{center_dot}mA{center_dot}s) and a flux of 5x10{sup 6} photons/s with a laser power of 4 W and a beam current of 200 mA. We then installed a CO{sub 2} laser operating at 10.6 {mu}m, and generated gamma rays in the energy range of 1-4 MeV. In this range, the gamma-ray luminosity is 7300 photons/(W{center_dot}mA{center_dot}s) and the flux is 5.6x10{sup 6} photons/s when operating the laser at 4 W and 200 mA. These performances are in good agreement with calculations. We will next add a Tm-fiber laser operating at 2 {mu}m to generate gamma rays in the energy range of 4-21 MeV, using a laser-focusing design to generate the maximum flux. The luminosity of this stage is calculated to be 6400 photons/(W{center_dot}mA{center_dot}s). Nd:YVO{sub 4}, CO{sub 2}, and Tm-fiber laser are all capable of operating in a high-power regime and can generate kW-level output power. At present, the maximum gamma-ray flux is limited only by the laser power. When operating the laser at 1 kW of output power with a beam current of 200 mA, we expect a flux of up to {approx}10{sup 9} photons/s. At NewSUBARU, up to several dozen MeV gamma-ray sources are capable of generating such high power.

43 PARTICLE ACCELERATORS↗

Dye laser traveling wave amplifier

Injection locking was applied to a cavity-dumped coaxial flashlamp pumped dye laser in an effort to obtain nanosecond duration pulses which have both high energy and narrow-linewidth. In the absence of an injected laser pulse, the cavity-dumped dye laser was capable of generating high energy (approx. 60mJ) nanosecond duration output pulses. These pulses, however, had a fixed center wavelength and were extremely broadband (approx. 6nm FWHM). Experimental investigations were performed to determine if the spectral properties of these outputs could be improved through the use of injection-locking techniques. A parametric study to determine the specific conditions under which the laser could be injection-locked was also carried out. Significant linewidth reduction to 0.0015nm) of the outputs was obtained through injection-locking but only at wavelengths near the peak lasing wavelength of the dye. It was found, however; that by inserting weakly dispersive tuning elements in the laser cavity, these narrow-linewidth outputs could be obtained over a wide (24nm) tuning range. Since the tuning elements had low insertion losses, the tunability of the output was obtained without sacrificing output pulse energy.

Davidson, F.↗

Fibre laser system providing generation of frequency-modulated pulses with a spectral width exceeding the gain linewidth

We propose an improved scheme of an amplifier similariton laser with a spectral width of the output significantly exceeding the gain linewidth. In the system, an additional dispersion element is inserted into the cavity to provide a local increase in the peak pulse power. The proposed scheme allows a reduction of pulse duration and an increase in peak power of the output pulse after compression. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of Lasing in Liquid-Crystal Systems with Microgratings

Waveguide lasing in a layer of nematic liquid crystal (NLC) doped with a dye has been experimentally observed. A chromium micrograting with a period of 1.76 μm has been deposited on the surface one of the cell substrates to provide a distributed feedback (DFB) and partially extract laser radiation to a quartz substrate. The DFB provides lasing in the ninth diffraction order for waveguide TM modes. Laser radiation is observed at the output of the substrate end face at an angle of 67.0° ± 1.5° with respect to the normal to the waveguide plane. An increase in voltage across the micrograting electrodes leads to red-shifted multimode lasing. A numerical simulation of a structure imitating the experimental cell has shown good agreement between the calculation results and experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Method and system for compact, multi-pass pulsed laser amplifier

A laser amplifier includes an input aperture operable to receive laser radiation having a first polarization, an output aperture coupled to the input aperture by an optical path, and a polarizer disposed along an optical path. A transmission axis of the polarizer is aligned with the first polarization. The laser amplifier also includes n optical switch disposed along the optical path. The optical switch is operable to pass the laser radiation when operated in a first state and to reflect the laser radiation when operated in a second state. The laser amplifier further includes an optical gain element disposed along the optical path and a polarization rotation device disposed along the optical path.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High voltage switch triggered by a laser-photocathode subsystem

A spark gap switch for controlling the output of a high voltage pulse from a high voltage source, for example, a capacitor bank or a pulse forming network, to an external load such as a high gradient electron gun, laser, pulsed power accelerator or wide band radar. The combination of a UV laser and a high vacuum quartz cell, in which a photocathode and an anode are installed, is utilized as triggering devices to switch the spark gap from a non-conducting state to a conducting state with low delay and low jitter.

43 PARTICLE ACCELERATORS↗

Graphene Q-switched Yb:KYW planar waveguide laser

A diode-pumped Yb:KYW planar waveguide laser, single-mode Q-switched by evanescent-field interaction with graphene, is demonstrated for the first time. Few-layer graphene grown by chemical vapor deposition is transferred onto the top of a guiding layer, which initiates stable Q-switched operation in a 2.4-cm-long waveguide laser operating near 1027 nm. Average output powers up to 34 mW and pulse durations as short as 349 ns are achieved. The measured output beam profile, clearly exhibiting a single mode, agrees well with the theoretically calculated mode intensity distribution inside the waveguide. As the pump power is increased, the repetition rate and pulse energy increase from 191 to 607 kHz and from 7.4 to 58.6 nJ, respectively, whereas the pulse duration decreases from 2.09 μs to 349 ns.

36 MATERIALS SCIENCE↗

Intense High-Contrast Femtosecond K-Shell X-Ray Source from Laser-Driven Ar Clusters

Bright Ar quasimonochromatic K-shell x ray with very little background has been generated using an Ar clustering gas jet target irradiated with a 30 fs ultrahigh-contrast laser, with a measured flux of 2.2x10{sup 11} photons/J into 4{pi}. This intense x-ray source critically depends on the laser contrast and intensity. The optimization of source output with interaction length is addressed. Simulations point to a nonlinear resonant mechanism of electron heating during the early stage of laser interaction, resulting in enhanced x-ray emission. The x-ray pulse duration is expected to be only 10 fs, opening the possibility for single-shot ultrafast keV x-ray imaging applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗