Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Surface Functional Groups Affect Iron (Hydr)oxide Heterogeneous Nucleation: Implications for Membrane Scaling

Because of its favorable thermodynamics and fast kinetics, heterogeneous solid nucleation on membranes triggers early-stage mineral scaling. Iron (hydr)oxide, a typical membrane scale, initially forms as nanoparticles that interact with surface functional groups on membranes, but these nanoscale phenomena are difficult to observe in real time. In this study, we utilized in situ grazing incidence small angle X-ray scattering and ex situ atomic force microscopy to examine the heterogeneous nucleation of iron (hydr)oxide on surface functional groups commonly used in membranes, including hydroxyl (OH), carboxyl (COOH), and fluoro (F) groups. We found that, compared to nucleation on hydrophilic OH- and COOH-surfaces, the high hydrophobicity of an F-modified surface significantly reduced the extents of both heterogeneously and homogeneously formed iron (hydr)oxide nucleation. Moreover, on the OH-surface, the high functional group density of 0.76 nmol/cm 2 caused faster heterogeneous nucleation than that on a COOH-surface, with a density of 0.28 ± 0.04 nmol/cm 2 . The F-surface also had the highest heterogeneous nucleation energy barrier (26 ± 0.6 kJ/mol), followed by COOH- (23 ±0.8 kJ/mol) and OH- (20 ± 0.9 kJ/mol) surfaces. The kinetic and thermodynamic information provided here will help us better predict the rates and extents of early-stage scaling of iron (hydr)oxide nanoparticles in membrane processes. Finally, this work provides both kinetic and thermodynamic information about iron (hydr)oxide nucleation controlled by membrane-related functional groups (OH, COOH, and F).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron Atom Exchange between Hematite and Aqueous Fe(II)

Aqueous Fe(II) has been shown to exchange with structural Fe(III) in goethite without any significant phase transformation. It remains unclear, however, whether aqueous Fe(II) undergoes similar exchange reactions with structural Fe(III) in hematite, a ubiquitous iron oxide mineral. Here, we use an enriched 57 Fe tracer to show that aqueous Fe(II) exchanges with structural Fe(III) in hematite at room temperature, and that the amount of exchange is influenced by particle size, pH, and Fe(II) concentration. Reaction of 80 nm-hematite (27 m 2 g -1 ) with aqueous Fe(II) at pH 7.0 for 30 days results in ~5% of its structural Fe(III) atoms exchanging with Fe(II) in solution, which equates to about one surface iron layer. Smaller, 50 nm-hematite particles (54 m 2 g -1 ) undergo about 25% exchange (~3× surface iron) with aqueous Fe(II), demonstrating that structural Fe(III) in hematite is accessible to the fluid in the presence of Fe(II). The extent of exchange in hematite increases with pH up to 7.5 and then begins to decrease as the pH progresses to 8.0, likely due to surface site saturation by sorbed Fe(II). Similarly, when we vary the initial amount of added Fe(II), we observe decreasing amounts of exchange when aqueous Fe(II) is increased beyond surface saturation. In conclusion, this work shows that Fe(II) can catalyze iron atom exchange between bulk hematite and aqueous Fe(II), despite hematite being the most thermodynamically stable iron oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Dissolved Iron in Solution on MgO Hydroxylation and Carbonation

MgO (periclase) is a promising material for direct air capture of CO 2 using a mineral looping process, but it is unknown how impurities in the environment will affect the CO 2 uptake and hence process economics. Here, we investigated the effects of dissolved iron on the extents of MgO hydroxylation and subsequent carbonation reactions to determine if this has a beneficial or detrimental effect. On single-crystal MgO, dissolved iron prevented hydration of MgO to Mg(OH) 2 (brucite) and instead formed a shell of lepidocrocite (γ-FeOOH). This did not passivate the MgO as dissolution below the shell was observed. During hydroxylation of MgO powders in the presence of dissolved iron, formation of brucite containing Fe(II) was observed. In addition, formation of nanoscale iron oxides containing Fe(III) was observed using magnetometry and Mössbauer spectroscopy. Subsequent carbonation experiments showed increased carbonation of MgO hydroxylated in the presence of iron. Our results indicate that the presence of dissolved solute impurities during hydroxylation may be beneficial for carbonation of hydroxylated MgO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemoselective Hydrodeoxygenation of Carboxylic Acids to Hydrocarbons over Nitrogen-doped Carbon-Alumina Hybrid-Supported Iron Catalysts

Here, the establishment of catalyst systems for chemoselective hydrodeoxygenation (HDO) of carboxylic acids to hydrocarbons, such as the HDO of long-chain fatty acids to alkanes, is important for biomass-to-biofuel conversion. As the most abundant and probably the cheapest transition-metal on the earth, iron is a promising non-noble alternative to precious metals for large-scale conversion of biomass. However, it usually suffers from unsatisfactory activity. In this work, nitrogen-doped carbon-alumina hybrid-supported iron (Fe-N-C@Al 2 O 3 ) catalyst is established for chemoselective HDO of carboxylic acids to hydrocarbons. By using stearic acid HDO as the model reaction, n-octadecane and n-hepadecane are produced with yields of 91.9% and 6.0%, respectively. Triglycerides can also be converted into liquid alkanes with total molar yield of >92%. In addition, the iron catalyst can chemoselectively catalyze the HDO of carboxylic acid group in the presence of other functional groups such as an aromatic ring. This chemoselectivity is rarely seen before because the aromatic ring is usually easier to be hydrogenated than carrying out HDO of carboxylic acid group. The characterization results showed that both the formation of nitrogen-doped carbon-alumina hybrid and the iron-loading are important for the Lewis basicity of these catalysts, in order to adsorb the acid substrates. The addition of melamine as nitrogen precursor during pyrolysis eliminates undesired reactions between iron precursor and alumina support to form inactive hercynite phase, leading to the formation of Fe 3 C active phase for the hydrogenation of –COOH to –CH 2 OH and the hybrid of N-C and alumina for the HDO of -CH 2 OH to –CH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Focused Ion Beam-Scanning Transmission Electron Microscopy with Energy-Dispersive X-ray Spectroscopy Study on Technetium Incorporation within Iron Oxides through Fe(OH) 2 (s) Mineral Transformation

Incorporation of Tc(IV) into iron oxide/hydroxide minerals has been explored and proposed as a promising pathway to preventing Tc(IV) reoxidation to environmentally mobile pertechnetate (TcO 4 - ) and improving long-term immobilization of radioactive technetium-99 (Tc). However, visual evidence evaluating the distribution of Tc(IV) incorporated within iron oxide/hydroxide phases has not been available, until now, despite potential implications on Tc(IV) stability within the host phase. For the purpose of this study Tc(IV) incorporation into iron oxide/hydroxide phases was facilitated via Fe(OH) 2 (s) oxidation and mineral transformation to magnetite (Fe 3 O 4 ). Focused ion beam - scanning transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy (FIB/STEM-EDS) methods were then combined with X-ray diffraction and absorption spectroscopy techniques to characterize and visually demonstrate that, for the first time, Tc(IV) is heterogeneously incorporated into different iron oxide/hydroxide phases as Tc(IV)-incorporated magnetite and/or TcO 2 ·2H 2 O(s) via different incorporation mechanisms. Heterogeneous distribution of Tc(IV) in magnetite suggests either (i) TcO4- is reduced quickly at the magnetite surface and then encapsulated into magnetite during continued octahedral crystal growth, or (ii) Tc(IV) alternatively partitioned into multiple layers of a blocky, plate-like morphological magnetite structure showing stratified Tc. With limited Tc-hematite (Fe 2 O 3 ) incorporation, the results suggest that TcO 2 ·2H 2 O(s) is formed and mainly associated/embedded in fibrous nanometer-sized polycrystalline hematite. This work highlights the power of modern state-of-the-art FIB/STEM-EDS approach to provide essential visual insights of the Tc-iron oxide/hydroxide incorporation and generate reliable mechanism-informed designs for waste forms relying on Tc mineral incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Population dynamics of iron-oxidizing communities in pilot plants for the treatment of acid mine waters

The iron-oxidizing microbial community in two pilot plants for the treatment of acid mine water was monitored to investigate the influence of different process parameters such as pH, iron concentration, and retention time on the stability of the system to evaluate the applicability of this treatment technology on an industrial scale. The dynamics of the microbial populations were followed using T-RFLP (terminal restriction fragment length polymorphism) over a period of several months. For a more precise quantification, two TaqMan assays specific for the two prominent groups were developed and the relative abundance of these taxa in the iron-oxidizing community was verified by real-time PCR. The investigations revealed that the iron-oxidizing community was clearly dominated by two groups of Betaproteobacteria affiliated with the poorly known and not yet recognized species 'Ferrovum myxofaciens' and with strains related to Gallionella ferruginea, respectively. These taxa dominated the microbial community during the whole investigation period and accelerated the oxidation of ferrous iron despite the changing characteristics of mine waters flowing into the plants. Thus, it is assumed that the treatment technology can also be applied to other mine sites and that these organisms play a crucial role in such treatment systems. 32 refs., 4 figs. 1 tab.

01 COAL, LIGNITE, AND PEAT↗

The Structure of the BfrB-Bfd Complex Reveals Protein-Protein Interactions Enabling Iron Release from Bacterioferritin

Ferritin-like molecules are unique to cellular iron homeostasis because they can store iron at concentrations much higher than those dictated by the solubility of Fe 3+ . Very little is known about the protein interactions that deliver iron for storage or promote the mobilization of stored iron from ferritin-like molecules. Here, we report the X-ray crystal structure of Pseudomonas aeruginosa bacterioferritin (Pa-BfrB) in complex with bacterioferritin-associated ferredoxin (Pa-Bfd) at 2.0 Å resolution. As the first example of a ferritin-like molecule in complex with a cognate partner, the structure provides unprecedented insight into the complementary interface that enables the [2Fe-2S] cluster of Pa-Bfd to promote heme-mediated electron transfer through the BfrB protein dielectric (~18 Å), a process that is necessary to reduce the core ferric mineral and facilitate mobilization of Fe 2+ . The Pa-BfrB-Bfd complex also revealed the first structure of a Bfd, thus providing a first view to what appears to be a versatile metal binding domain ubiquitous to the large Fer2_BFD family of proteins and enzymes with diverse functions. Residues at the Pa-BfrB-Bfd interface are highly conserved in Bfr and Bfd sequences from a number of pathogenic bacteria, suggesting that the specific recognition between Pa-BfrB and Pa-Bfd is of widespread significance to the understanding of bacterial iron homeostasis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Seeing the cis -Dihydroxylating Intermediate: A Mononuclear Nonheme Iron-Peroxo Complex in cis -Dihydroxylation Reactions Modeling Rieske Dioxygenases

The nature of reactive intermediates and the mechanism of the cis-dihydroxylation of arenes and olefins by Rieske dioxygenases and synthetic nonheme iron catalysts have been the topic of intense research over the past several decades. In this study, we report that a spectroscopically well characterized mononuclear nonheme iron(III)-peroxo complex reacts with olefins and naphthalene derivatives, yielding iron(III) cycloadducts that are isolated and characterized structurally and spectroscopically. Further, kinetics and product analysis reveal that the nonheme iron(III)-peroxo complex is a nucleophile that reacts with olefins and naphthalenes to yield cis-diol products. The present study reports the first example of the cis-dihydroxylation of substrates by a nonheme iron(III)-peroxo complex that yields cis-diol products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Does a theoretical estimation of the dust size distribution at emission suggest more bioavailable iron deposition.

Global models have been used to deduce atmospheric iron supply to the ocean, but the uncertainty remains large. We used a global chemical transport model to investigate the effect of the estimated size distribution of dust on the bioavailable iron deposition. Simulations are performed with six different size distributions for dust aerosols at emission using similar aerosol optical depths (AODs) to constrain the total emission flux of dust. The global dust emission rate using a recent theoretical estimate for the dust size distribution at emission (2116 Tg yr{sup -1}) is about two times larger than the average of estimates using the other four empirical size distributions (1089 {+-} 469 Tg yr{sup -1}). In contrast to the large differences in total emissions, the emission of fine dust (diameter < 2.5 {mu}m) is relatively robust (176 {+-} 34 Tg yr{sup -1}), due to the strong constraint of AOD on fine dust emission. Our model results indicate that soluble iron (SFe) deposition is relatively invariant to the dust size distribution at emission in regions where most soluble iron is provided by acid mobilization of fine dust. In contrast, the use of the theoretical size distribution suggests a larger deposition of SFe (by a factor of 1.2 to 5) in regions where the concentration of acidic gases is insufficient to promote iron dissolution in dust particles, such as the South Atlantic. These results could have important implications for the projection of marine ecosystem feedbacks to climate change and highlight the necessity to improve the dust size distribution.

58 GEOSCIENCES↗

Iron Speciation and Mixing in Single Aerosol Particles from the Asian Continental Outflow

Bioavailable iron from atmospheric aerosol is an essential nutrient that can control oceanic productivity, thereby impacting the global carbon budget and climate. Particles collected on Okinawa Island during an atmospheric pollution transport event from China were analyzed using complementary single particle techniques to determine the iron source and speciation. Comparing the spatial distribution of iron within ambient particles and standard Asian mineral dust, it was determined that field-collected atmospheric Fe-containing particles have numerous sources, including anthropogenic sources such as coal combustion. Fe-containing particles were found to be internally mixed with secondary species such as sulfate, soot, and organic carbon. The mass weighted average Fe(II) fraction (defined as Fe(II)/[Fe(II)+Fe(III)]) was determined to be 0.33 {+-} 0.08. Within the experimental uncertainty, this value lies close to the range of 0.26-0.30 determined for representative Asian mineral dust. Previous studies have indicated that the solubility of iron from combustion is much higher than that from mineral dust. Therefore, chemical and/or physical differences other than oxidation state may help explain the higher solubility of iron in atmospheric particles.

01 COAL, LIGNITE, AND PEAT↗

Opacity and temperature profiles through thick iron targets irradiated by short bursts of intense x-rays

We model x-ray free-electron laser (XFEL) interactions of pulses of 100 fs duration or less with thick (many attenuation lengths) solid iron targets assuming the instantaneous target opacity is determined solely by the energy absorbed for a given photon energy. Examples of the bound-free opacity dependence on energy absorbed for iron targets at photon energies of 750-2000 eV are presented. This is utilized to model XFEL pulse propagation through solid iron and to predict the resulting iron plasma opacity as the pulse progresses. Assuming the establishment of local thermodynamic equilibrium and electron-ion thermalization after a sufficiently long time interval, we calculate the temperature profiles to be expected in solid iron targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Texture formation in iron particles using mechanical milling with graphite as a milling aid

Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method.

36 MATERIALS SCIENCE↗

Iron oxide and gold nanoparticles in cancer therapy

Continuous research activities in the field of nanomedicine in the past decade have, to a great extent, been focused on nanoparticle technologies for cancer therapy. Gold and iron oxide nanoparticles (NP) are two of the most studied inorganic nanomaterials due to their unique optical and magnetic properties. Both types of NPs are emerging as promising systems for anti-tumor drug delivery and for nanoparticle-mediated thermal therapy of cancer. In thermal therapy, localized heating inside tumors or in proximity of tumor cells can be induced, for example, with Au NPs by radiofrequency ablation heating or conversion of photon energy (photothermal therapy) and in iron oxide magnetic NPs by heat generation through relaxation in an alternating magnetic field (magnetic hyperthermia). Furthermore, the superparamagnetic properties of iron oxide nanoparticles have led to their use as potent MRI (magnetic resonance imaging) contrast agents. Surface modification/coating can produce NPs with tailored and desired properties, such as enhanced blood circulation time, stability, biocompatibility and water solubility. To target nanoparticles to specific tumor cells, NPs should be conjugated with targeting moieties on the surface which bind to receptors or other molecular structures on the cell surface. The article presents several approaches to enhancing the specificity of Au and iron oxide nanoparticles for tumor tissue by appropriate surface modification/functionalization, as well as the effect of these treatments on the saturation magnetization value of iron oxide NPs. The use of other nanoparticles and nanostructures in cancer treatment is also briefly reviewed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Which is the best oxidant for complexed iron removal from groundwater: The Kogalym case

A short overview of the significance of a preoxidation stage groundwater treatment is presented. As an example the case of complexed iron removal from Kogalym groundwater (Tjumen, Siberia, Russian Federation) using different preoxidants (ozone, oxygen, chlorine, hydrogen peroxide, and potassium permanganate) is discussed. The key problem is stable di- and trivalent iron-organic complexes in groundwater which after aeration tend to pass through the hydroanthracite-sand gravity filters. The total organic carbon (TOC) content in raw groundwater is in the range of 3.2-6.4 mg/L, total iron content 2.7-6.0 mg/L and divalent iron content 2.4-4.0 mg/L. Separation from Kogalym groundwater by XAD-16 adsorbent humic matter fraction was homogeneous, with only 1 peak on the chromatogram with maximum Rt = 10.75 min and corresponding molecular mass 1911 ({lt} 2000). The final developed treatment technology is based on the water oxidation/reduction potential (ORP) optimization according to the iron system pE-pH diagram and consists of intensive aeration of raw water in the Gas-Degas Treatment (GDT) unit with the following sequence: filtration through the hydroanthracite and special anthracite Everzit, with intermediate enrichment of water with pure oxygen between the filtration stages.

01 COAL, LIGNITE, AND PEAT↗

ON THE NONRELATIVISTIC ORIGIN OF RED-SKEWED IRON LINES IN CATACLYSMIC VARIABLE, NEUTRON STAR, AND BLACK HOLE SOURCES

We perform the analysis of the iron K{sub {alpha}} lines detected in three sources representing three types of accreting compact sources: cataclysmic variable (CV) GK Per, neutron star (NS) Serpens X-1, and black hole (BH) GX 339-4. We find, using data from Epic-PN Camera onboard XMM-Newton observatory, that the iron K{sub {alpha}} emission line in GK Per has a noticeable red-skewed profile. We compare the GK Per asymmetric line with the red-skewed lines observed by XMM-Newton in Serpens X-1 and GX 339-4. The observation of the K{sub {alpha}} emission with red-skewed features in CV GK Per cannot be related to the redshift effects of General Relativity (GR). Therefore, if the mechanism of the K{sub {alpha}}-line formation is the same in CVs, NSs, and BHs then it is evident that the GR effects would be ruled out as a cause of red skewness of K{sub {alpha}} line. The line reprocessing in an outflowing wind has been recently suggested as an alternative model for a broad red-shifted iron line formation. In the framework of the outflow scenario the red-skewed iron line is formed in the strong extended wind due to its illumination by the radiation emanating from the innermost part of the accreting material. The outflow is a common phenomenon for CVs, NSs, and BHs. In this paper, we demonstrate that the asymmetric shapes of the lines detected from these CV, NS, and BH sources are well described with the wind (outflow) model. Furthermore we find by analyzing Rossi X-Ray Timing Explorer(RXTE) observations that when the strong red-skewed iron line is observed in GX 339-4 the high-frequency variability is strongly suppressed. While this fact is hard to reconcile with the relativistic models, it is consistent with the outflowing gas washing out high-frequency modulations of the radiation presumably originated in the innermost part of the source.

99 GENERAL AND MISCELLANEOUS↗

C/O abundance ratios, iron depletions, and infrared dust features in galactic planetary nebulae

We study the dust present in 56 Galactic planetary nebulae (PNe) through their iron depletion factors, their C/O abundance ratios (in 51 objects), and the dust features that appear in their infrared spectra (for 33 objects). Our sample objects have deep optical spectra of good quality, and most of them also have ultraviolet observations. We use these observations to derive the iron abundances and the C/O abundance ratios in a homogeneous way for all the objects. We compile detections of infrared dust features from the literature and we analyze the available Spitzer/IRS spectra. Most of the PNe have C/O ratios below one and show crystalline silicates in their infrared spectra. The PNe with silicates have C/O <1, with the exception of Cn 1-5. Most of the PNe with dust features related to C-rich environments (SiC or the 30 μm feature usually associated to MgS) have C/O ≳ 0.8. Polycyclic aromatic hydrocarbons are detected over the full range of C/O values, including 6 objects that also show silicates. Iron abundances are low in all the objects, implying that more than 90% of their iron atoms are deposited into dust grains. The range of iron depletions in the sample covers about two orders of magnitude, and we find that the highest depletion factors are found in C-rich objects with SiC or the 30 μm feature in their infrared spectra, whereas some of the O-rich objects with silicates show the lowest depletion factors.

79 ASTRONOMY AND ASTROPHYSICS↗

Palladium isotopic evidence for nucleosynthetic and cosmogenic isotope anomalies in IVB iron meteorites

The origin of ubiquitous nucleosynthetic isotope anomalies in meteorites may represent spatial and/or temporal heterogeneity in the sources that supplied material to the nascent solar nebula, or enhancement by chemical processing. For elements beyond the Fe peak, deficits in s-process isotopes have been reported in some (e.g., Mo, Ru, W) but not all refractory elements studied (e.g., Os) that, among the iron meteorites, are most pronounced in IVB iron meteorites. Palladium is a non-refractory element in the same mass region as Mo and Ru. In this study, we report the first precise Pd isotopic abundances from IVB irons to test the mechanisms proposed for the origin of isotope anomalies. First, this study determined the existence of a cosmogenic neutron dosimeter from the reaction {sup 103}Rh(n, β{sup −}){sup 104}Pd in the form of excess {sup 104}Pd, correlated with excess {sup 192}Pt, in IVB irons. Second, all IVB irons show a deficit of the s-process only isotope {sup 104}Pd (ε {sup 104}Pd = −0.48 ± 0.24), an excess of the r-only isotope {sup 110}Pd (ε{sup 110}Pd = +0.46 ± 0.12), and no resolvable anomaly in the p-process {sup 102}Pd (ε {sup 102}Pd = +1 ± 1). The magnitude of the Pd isotope anomaly is about half that predicted from a uniform depletion of the s-process yields from the correlated isotope anomalies of refractory Mo and Ru. The discrepancy is best understood as the result of nebular processing of the less refractory Pd, implying that all the observed nucleosynthetic anomalies in meteorites are likely to be isotopic relicts. The Mo–Ru–Pd isotope systematics do not support enhanced rates of the {sup 22}Ne(α,n){sup 25}Mg neutron source for the solar system s-process.

79 ASTRONOMY AND ASTROPHYSICS↗

Testing the Kerr nature of black hole candidates using iron line spectra in the CPR framework

The iron Kα line commonly observed in the X-ray spectrum of both stellar-mass and supermassive black hole (BH) candidates originates from X-ray fluorescence of the inner accretion disk. Accordingly, it can be used to map the spacetime geometry around these objects. In this paper, we extend previous work using the iron Kα line to test the Kerr BH hypothesis. We adopt the Cardoso–Pani–Rico parametrization and we test the possibility of constraining possible deviations from the Kerr solution that can be obtained from observations across the range of BH spins and inclination angles. We confirm previous claims that the iron Kα line is potentially a quite powerful probe for testing the Kerr metric given sufficiently high quality data and with systematics under control, especially in the case of fast-rotating BHs and high inclination angles since both conditions serve to maximize relativistic effects. We find that some geometric perturbations from Kerr geometry manifest more strongly in the iron line profile than others. While the perturbation parameter ϵ{sub 3}{sup t} can be well constrained by the iron line profile, an orthogonal data set is necessary to constrain departures from Kerr geometry in ϵ{sub 3}{sup r}.

79 ASTRONOMY AND ASTROPHYSICS↗