Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Theory of Cation Solvation in the Helmholtz Layer of Li-Ion Battery Electrolytes

The solvation environments of Li + in conventional nonaqueous battery electrolytes, such as LiPF 6 in mixtures of ethylene carbaronate (EC) and ethyl methyl carbonate (EMC), are often used to rationalize transport properties and solid electrolyte interphase (SEI) formation. Solvation environments in the compact electrical double layer (EDL) next to the electrode, also known as the Helmholtz layer, determine (partially) what species can react to form the SEI, with bulk solvation environments often being used as a proxy. Here, we develop and test a theory of cation solvation in the Helmholtz layer of nonaqueous Li-ion battery electrolytes. First, we validate the theory against bulk and diffuse EDL atomistic molecular dynamics (MD) simulations of LiPF 6 EC/EMC mixtures as a function of surface charge, where we find the theory can qualitatively capture the solvation environments. Next, we turn to the Helmholtz layer, where we find the main effect of the solvation structures next to the electrode is an apparent reduction in the number of binding sites between Li + and the solvents, again where we find reasonable agreement with our developed theory. Finally, by solving a simplified version of the theory, we find that the probability of Li + binding to each solvent remains equal to the bulk probability, suggesting that the bulk solvation environments are a reasonable place to start when understanding battery electrolytes. Our developed formalism can be parametrized from bulk MD simulations and used to predict the solvation environments in the Helmholtz layer through reducing the number of available coordination sites, which can be used to determine what could react and form the SEI.

Helmholtz↗
DOE OSTI2026

Direct Determination of 3C/4H Silicon Carbide Heterophase Interfaces by Electron Ptychography

Silicon carbide is a technologically relevant material that can exist in various structural polymorphs, each with its own electronic properties. Through the controlled growth of abrupt interfaces between the polymorphs, systems with emergent properties arise from differences in local bonding and stacking sequences. Determining the structure of these interfaces provides important insights into predicting and ultimately controlling their properties. Here, in this study, we use multislice electron ptychography (MEP) to qualitatively and quantitatively analyze interfaces between 3C and 4H silicon carbide in three dimensions. Two distinct interfaces are investigated: a coherent interface between $(1\bar{1}1)$ (3C) and $(0001)$ (4H) , and an incoherent interface between $(1\bar{1}2)$ (3C) and $(1\bar{1}00)$ (4H) . At the coherent interface, MEP enables direct quantification of a sharp boundary with an inclined step, whereas at the incoherent interface, local atomic displacements are determined along dislocation cores. By quantifying the spatial distribution and atomic-scale structure of these interfaces in three dimensions, this study provides insight into the complexity of silicon carbide heteropolytype interfaces, paving the way for theoretical modeling and the development of design rules to achieve desired properties.

heterophase interface↗
DOE OSTI2025

UV-Enabled Defect Engineering in Multilayer GaSe and InSe and UV Writing of the Grating Pattern

III–VI post-transition-metal chalcogenides are layered semiconductor materials that exhibit direct band gaps in multilayers. Defect engineering is essential in 2D layered semiconductors for functional devices. Here, in this work, we report defect engineering in multilayer gallium selenide (GaSe) and indium selenide (InSe), where defects generated by ultraviolet (UV, 325 nm) laser irradiation result in an additional photoluminescence (PL) line. The additional PL line is due to defect-bound excitons. Characteristics of the defect emission are similar in GaSe and InSe samples subjected to UV irradiation, air annealing, and hydrostatic pressure. Two-beam UV interference was applied to create grating patterns with a periodic array of low and high densities of defects in GaSe. Density functional theory has identified the defect type in GaSe. The results provide valuable insights into defect generation and UV scribing of photonic circuits in 2D Se-based multilayers for optical integration in a 2D platform.

2D multilayered materials↗
DOE OSTI2026

Control of Excitonic Energy Transfer in RGB Quantum Dot:Polymer Composites for Tunable White Emission

Tint-controlled white light is crucial for both illumination systems and display applications. Here, in this study, we demonstrate solution-processed quantum-dot light-emitting diodes (QD-LEDs) featuring a red–green–blue (RGB) QD–poly(methyl methacrylate) (PMMA) composite emissive layer (EML) for tunable white electroluminescence (EL). In this composite EML, PMMA functions as a dispersion matrix that modulates the interdot spacing (d), thereby controlling Förster resonance energy transfer (FRET) between QDs. By adjustment of the PMMA content, the balance of R, G, and B emissions is controlled, enabling systematic and continuous tuning of the EL color from greenish to reddish white at a fixed RGB ratio and constant driving bias. Time-resolved photoluminescence measurements confirm that the variation in the exciton lifetime with the PMMA fraction is the primary factor for tuning the EL color. Notably, nearly pure white EL with CIE coordinates close to (0.33, 0.33) is achieved using a diluted PMMA matrix without significant degradation of the electrical properties. Our results demonstrate d as an independent design parameter for decoupling color tuning from RGB composition and electrical operation, providing a versatile design framework for high-quality white- or tint-controlled QD-LEDs toward advanced solid-state lighting and display technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of Grafting Density and the Ionic Environment on the Structure of Zwitterionic Brushes

Zwitterionic polymer brushes possess a high potential for applications as surface coatings, e.g., in antifouling applications. Their complex association behavior due to the coexistence of oppositely charged groups on the same monomeric unit allows for a broad variation of polarity, hydrophilicity, and the antipolyelectrolyte effect with the variation of the surrounding environment. In this study, planar polysulfobetaine brushes were investigated with neutron reflectometry (NR) and neutron spin–echo spectroscopy under grazing incidence (GINSES) to explore the brush structure and its inner dynamics perpendicular to the substrate. In particular, the effects of the substrate–initiator system and ionic strength on the structure were investigated with neutron reflectometry and a swelling by a factor of 3–5 was found in the presence of aqueous NaCl and MgCl 2 solutions compared to the dry state. During the data analysis, the applicability of a model-free evaluation was also demonstrated for the investigated polysulfobetaine brushes. Furthermore, it was found with GINSES that in contrast to neutral brushes, these polysulfobetaine brushes do not show the typical concentration fluctuations in the nanosecond time range when partially swollen with salt-free water.

36 MATERIALS SCIENCE↗
DOE OSTI2026

In Situ Studies of Ru-CeO 2 –TiO 2 Catalysts for Selective CO 2 Hydrogenation to Methane: Importance of Metal ↔ Oxide–Oxide Interactions

Here, this work investigates Ru-CeO 2 -TiO 2 catalysts for the CO 2 methanation reaction and compares their performance with previously studied Ru-CeO 2 systems. Despite the lower Ru loading, the TiO 2 -containing catalysts exhibit significantly higher activity. To understand this behavior, in situ X-ray absorption spectroscopy (XAS) was carried out at the Ru K-edge and Ce L 3 -edge. Unlike Ru-CeO 2 , which displays reversible redox behavior of Ru, the Ru-CeO 2 -TiO 2 catalysts show irreversible Ru reduction and a substantially higher fraction of Ce 3+ species under all tested conditions (H 2 , CO 2 , H 2 /CO 2 ). The stabilization of metallic Ru during methanation, together with the enhanced formation of Ce 3+ promoted by TiO 2 through interfacial electronic transfer, accounts for their superior performance. Complementary in situ DRIFTS measurements reveal the formation and rapid consumption of bidentate carbonates and formates. These species act as a key intermediate in methane formation. Overall, these findings highlight the crucial role of the mixed CeO 2 -TiO 2 oxide in tuning the surface chemistry of the catalysts by stabilizing metallic Ru, enhancing ceria reducibility, and promoting efficient reaction pathways for CO 2 methanation. The manipulation of metal↔oxide-oxide interactions can be a very useful tool when dealing with the valorization of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Sub-Nanometer Nanoclusters of Copper Atop Single-Atom Copper Moieties toward Electrochemical CO 2 Hydrogenation to Methane

The electrochemical CO 2 reduction (eCO 2 R) offers a compelling route for converting CO 2 into value-added fuels and chemicals. Among CO 2 -derived products, methane (CH 4 ) occupies a distinct position, serving both as a key intermediate for emerging cascade electro-oxidation to oxygenates and as a strategically important extraterrestrial fuel that can be generated in situ from off-planet CO 2 resources. Although Cu-based catalysts capable of selectively producing CH 4 have been reported, they seldom sustain high selectivity at practically relevant current densities. Here, we created a single-step co-pyrolysis strategy toward generating and anchoring Cu sub-nanometer clusters (Cu SNC ) atop Cu-N x single-atom (SA) motifs embedded within N-doped carbon (NC), with controllable nanostructures through tuning of the synthesis parameters. Complementary spectroscopic analyses and density functional theory (DFT) calculations help reveal a structure−activity correlation that could guide the catalyst design. The Cu SNC @NC sample synthesized at 550 °C pyrolysis temperature (best described and modeled as Cu 3 -CuN 4 domains) represents the most effective combination of cluster size, metal-nitrogen coordination, and adsorption energetics needed to selectively promote CH 4 generation versus other eCO 2 R products. Incorporating pulsed electrolysis and hydrophobicity-modulated transport tuning at the triple-phase boundary (TPB) further enhanced CH 4 production achieving a partial CH 4 current density of ∼321 mA cm −2 , 53% Faradaic efficiency (FECH 4 ), and less than 4% combined FE for other eCO 2 R products, simplifying downstream CH 4 purification or upgrading. This work establishes generalizable principles for controlling Cu cluster atomicity and metal−nitrogen coordination, both of which are recognized determinants of CH 4 -efficient eCO 2 R.

CH4 production↗
DOE OSTI2025

Above the Energy Gap Law: Heavy Chalcogenide Substitution in NIR II-Emissive Diradicaloid Qubits

Near-infrared (NIR, 700–1700 nm)- and telecom (∼1260–1625 nm)-emissive molecules are good candidates for biological imaging and quantum sensing applications, respectively; however, bright low energy emission is rare due to exponentially increasing nonradiative decay rates in these regions, a phenomenon known as the energy gap law. Recent literature has emphasized the importance of minimizing skeletal modes to prevent increased nonradiative decay rates, but most organic lumiphores in these regions utilize large, conjugated scaffolds containing many C═C modes. Here we report a compact, telecom-emissive scaffold, tetrathiafulvalene-2,3,6,7-tetraselenate, or TTFts, that displays remarkable air, water, and acid stability, exhibits record quantum yields and brightness values, and retains quantum coherence under ambient conditions. These properties are enabled through methodical selenium substitution, which bathochromically shifts emission while shifting skeletal vibrations to lower energies. This new scaffold validates heavy heteroatom substitution strategies and establishes a new class of bright telecom emitters and robust qubits.

biological imaging↗
DOE OSTI2025

High-Nickel Cathodes with Mechanical and Interfacial Robustness via Tailored Concentration Gradients for Stable Li-Ion Batteries

Here, we have developed a versatile mathematical framework integrated with an automated reactor system to design and reify highly customizable full concentration gradient (FCG) in high-nickel cathodes for advanced Li-ion batteries. This method provides precise and independent control of the average composition, slope, and curvature of FCGs, enabling the optimization of structural and mechanical properties of the cathode materials. We have showcased this method with Ni 0.8 Co 0.1 Mn 0.1 (OH) 2 precursors of controlled FCGs, which unlocked an optimized cathode with excellent cycling stability without crack formation after repeated cycles. This work opens up new possibilities for the design and manufacturing of advanced cathode materials, enabling safer, high-performance batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Impacts of Precipitation Events on Concentrations of Oxygenated Gas- and Particle-Phase Compounds Observed in the Amazon

Removal of gases and particles by precipitation (wet deposition) is a critical process that significantly influences the transport and chemical transformation of atmospheric compounds. However, there are few studies that directly measure or constrain the rates of this process under real-world conditions. This work quantifies the net change in ambient concentrations during precipitation events (removal rates) of gas- and particle-phase organic compounds at a surface site near Manaus, Brazil, during the GoAmazon2014/5 campaign. Removal rates of identified and unknown compounds that have been previously classified into source-based clusters are measured during rain events and categorized based on estimated properties of compounds and clusters. Highly oxygenated gases, such as isoprene oxidation products, are removed during precipitation events with a median removal rate of 0.09 h –1 and the fastest analyte is removed at a rate of 0.22 h –1 . Removal rates of particle-phase compounds are observed at roughly this median rate, while less soluble gases, such as terpenes, exhibit low removal rates. These results are roughly in agreement with prior theoretical estimates of wet deposition rates for comparable compounds, providing an empirical point of comparison while noting that our metric reflects the net influence of precipitation events rather than wet deposition alone.

atmospheric chemistry↗
DOE OSTI2025

Electrical Control of the Nuclear Spin States of Rare-Earth Adatoms

Rare-earth adatoms on surfaces have been studied for potential atomic-scale magnetic storage, quantum sensing, and quantum computing applications. Despite accumulating experimental efforts, a comprehensive description of the electronic configurations of the adatoms remains elusive. Here, we investigate two charge states and several electronic configurations, including 5d and 6s valence shells, for a Sm adatom on a MgO substrate using multiconfigurational ab initio methods, for the possibility of using the Sm nuclear spin levels as qubits. For the configurations in a neutral charge state, we find that the electronic ground state is a singlet, and thus the hyperfine interaction associated with the 147 Sm nucleus is absent, which may greatly enhance nuclear spin coherence time. The degeneracy of the nuclear levels is lifted by the nuclear quadrupole interaction. We show that the splitting of the nuclear levels can be controlled by a static electric field, and that Rabi oscillations between the nuclear levels can be induced by a time-dependent electric field. For the configurations in a singly charged state, electronic Kramers doublets are formed. The electronic configurations including an unpaired 6s orbital exhibit a strong hyperfine Stark effect due to a large Fermi contact contribution to the hyperfine interaction. In these configurations, electric-field-induced Rabi oscillations between the electronic-nuclear levels can occur at frequencies up to 3 orders of magnitude higher than those for the neutral charge state. The proposed system may be experimentally observed within scanning tunneling microscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Magnetic Response of Excitons and Excitonic Complexes in Defective Hexyl Ammonium Lead Iodide Self-Assembled Quantum Wells

Correlating the magnetic behavior of low-dimensional semiconductors with the chemistry used to form these excitonic materials remains crucial to the development of devices applied to quantum technologies. In this study, we apply large magnetic fields during the collection of low-temperature photoluminescence (PL) to assess the magnetic properties of excitons in hexyl ammonium lead iodide (HA 2 PbI 4 ) self-assembled quantum wells (SAQWs) formed at liquid−liquid interfaces. The effect of incident laser power and temperature was used to assign lower energy features in these samples’ PL spectra to both excitons trapped at defect sites and trions. Measured peaks shifts allow us to estimate coupling between the applied magnetic fields and the charged defect excitons. Our conclusions are supported by density functional theory calculations on supercells of the proposed defective HA 2 PbI 4 SAQW structure. Additionally, we find an anomalous magnetic response from trion states that resembles the behavior of interacting excitonic complexes in similar, quantum-confined materials at low temperatures. These results highlight the crucial role that chemical conditions can play in the magnetic response of 2D semiconductors applied in quantum technologies.

defect chemistry↗
DOE OSTI2025

Influence of Alkyne Precursor Structure on Carbon Nanotube Chiral Distribution: Data-Dense Analysis Across Multiple Catalyst Types

Carbon nanotubes (CNTs) are a desirable material in the field of optoelectronics and semiconductors due to electronic properties (e.g., bandgap) that are dependent upon their chirality, defined by their diameter and lattice angle. Unfortunately, industrial-scale syntheses have yet to realize growth of a single desired chirality and instead rely on postsynthetic separation techniques to refine a chiral mixture, which increases process complexity and cost. Here, we studied the influence of precursor structure on chiral distribution, using a series of terminal alkyne precursors (acetylene, methylacetylene, vinylacetylene, 1-butyne, two enantiomers of 3-butyn-2-ol and a racemic mixture thereof) to grow CNTs across five transition-metal catalysts (Fe, FeMo, and three proportions of CoMo). Multiwavelength Raman spectroscopy on 5,145 spots (5 catalysts, 7 precursors, 3 lasers, and 49 distinct substrate locations on each) determined that acetylene grew the smallest diameter CNTs, while vinylacetylene produced fewer subnanometer CNTs. Though precursor structure did not dictate a uniform chiral shift, it was shown to broaden or narrow chiral distribution, while catalyst structure played a dominant role. In conclusion, this is consistent with metal-precursor binding occurring through unsaturated bonds in the hydrocarbons via the alkyne polymerization mechanism.

Carbon nanotubes↗
DOE OSTI2025

Emergence of Moiré Dirac Fermions at the Interface of Topological and 2D Magnetic Insulators

Dirac Fermions on the surface of the topological insulator are spin-momentum locked and topologically protected, making them interesting for spintronics and quantum computing applications. When in proximity to magnetism and superconductivity, these electronic states could result in quantum anomalous Hall effect and Majorana Fermions, respectively. An even more dramatic enrichment of the topological insulators’ physics is expected for moiré superlattices, where, analogously to the twisted graphene layers, electronic correlations could be strongly enhanced, a task previously notoriously difficult to achieve in topological matter. Until now, the experimental confirmation of such moiré properties has remained elusive. Here, we grow the two-dimensional van der Waals magnetic insulators FeX 2 (where X = Cl or Br) on top of the topological insulator Bi 2 Se 3 and establish a moiré superlattice formation at the interface. By means of scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we investigate the electronic properties of the formed moiré superlattice and demonstrate its tunability via the film choice. We reveal replicated Dirac cones and focus on their intersections, which, in the case of FeBr 2 /Bi 2 Se 3 , occur below the Fermi level. We identify the signatures of small gaps at the intersections around the M̅ i points that we attribute to the moiré interaction. These findings point to the specific type of magnetic moiré potential that breaks the time-reversal symmetry at these points but not at the $\barΓ$ point. Our observations provide an intriguing scenario of correlated topological phases induced by moiré superlattice that may result in topological superconductivity, high Chern number phases, and exotic noncollinear magnetic textures.

2D magnets↗
DOE OSTI2025

Optomechanical Tuning of Second Harmonic Generation Anisotropy in Janus MoSSe/MoS 2 Heterostructures

Symmetry breaking in van der Waals materials enables the realization of quantum states and advanced device functionalities. Janus transition-metal dichalcogenides (TMDs) exhibit distinctive nonlinear optical properties due to their broken out-of-plane mirror symmetry. However, the dynamic control of second harmonic generation (SHG) anisotropy and resonance behavior via optical excitation remains elusive. Here, in this work, we investigate the SHG response of Janus MoSSe/MoS 2 heterostructures with 2H and 3R stackings. We can tune the SHG response by varying the incident photon wavelength from 800 to 1000 nm, which shows a resonance-dependent enhancement in intensity and a deviation from 6-fold symmetry, indicating wavelength-dependent anisotropy. The ratio between maximum and minimum intensity in the armchair directions, associated with the SHG anisotropy, reaches a value of 1.73 at the excitation wavelength of 1000 nm. Group theory analysis and first-principles calculations reveal that the observed anisotropy arises from optically induced strain. Our findings highlight the role of symmetry breaking and optical resonance contributing to the optomechanical tuning of SHG anisotropy, offering opportunities for developing Janus TMD-based photonic devices for frequency conversion, light generation, and optical switching.

Janus transition metal dichalcogenides↗
DOE OSTI2025

Efficient Measurement of Length Distribution of 1D Nanoparticles in Solution via Optical Polarimetry

The efficient measurement of the length distribution of nanotubes, nanowires, and other one-dimensional (1D) nanoparticles in solution is important to enable their incorporation into materials and devices and to optimize their processing for properties of interest, such as thermal/electrical conductivity or mechanical strength, in suspensions and composites. We report an electric-field (E-field)-assisted optical-polarimetry technique to measure the length distribution of ensembles of high-aspect-ratio particles in dilute suspension. The degree of alignment of polarizable 1D particles suspended in a fluid under Brownian motion explicitly depends on the E-field strength and the particle length. We show that it is possible to extract the length distribution of 1D nanoparticles suspended in an insulating fluid by applying a range of E-fields and using optical polarimetry to measure the corresponding alignment order parameter. Notably, the method is relatively insensitive to the diameter of the 1D particles, which can be poorly known or vary within a sample. The technique is validated with silver nanowires and carbon nanotubes of known lengths, as well as polymer-depletion-length-separated single-wall carbon nanotube samples with length distributions independently measured with analytical ultracentrifugation. Finally, we demonstrate the ability of the optical-polarimetry technique to quantify changes in the length distribution of ultranarrow, sub-nanometer-diameter single-wall carbon nanotubes under different types and durations of ultrasonication. Within its range of applicability (polarizable 1D nanoparticles in the 0.5 to 15 μm length range, constrained by the voltage stability of the media and the suspended particles), the E-field-assisted optical-polarimetry method is a particularly efficient and accurate method to measure the length distribution of nanowires and nanotubes in suspension.

1D nanoparticles↗
DOE OSTI2025

Topology-Dependent Polymer Stretching and Scission in Solution at Extreme Shear Rates

There has been significant interest in the engineering of polymer topology to control rheology and mechanical stability in dilute solutions for applications involving extreme shear rate flows. However, methods to experimentally probe properties at relevant shear rates (≈ 10 4 –10 6 s –1 ) have remained ex situ, obscuring access to measures of polymer deformation and rheology that would otherwise provide mechanistic insight into the topology-dependent properties that control their behavior in extreme shear flows. In this study, we used novel in situ small angle neutron scattering measurements in a capillary rheometer (capillary rheo-SANS) to simultaneously measure solution viscosities and polymer deformations in high shear on a series of chemically homologous topology-defined polymers including linear, randomly branched, and star-shaped molecules. We demonstrate that differences in the onset of chain stretching and shear thinning of these polymers in dilute solution are controlled primarily by differences in their molecular relaxation time. These differences correlate with differences in chain scission inferred from ex situ measurements at more extreme shear rates. Together, the results demonstrate a direct coupling between chain deformation and scission, and suggest that the dominant effect of branching as a means to impart resilience against mechanical degradation is through differences in relaxation dynamics due to branching. We anticipate that these results will provide key insights to engineer topology-controlled polymers for rheological modification, mechanical stability, and controlled mechano-chemistry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗