Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Analysis of a Multiprocessor Guidance Computer

The design of the next generation of spaceborne digital computers is described. It analyzes a possible multiprocessor computer configuration. For the analysis, a set of representative space computing tasks was abstracted from the Lunar Module Guidance Computer programs as executed during the lunar landing, from the Apollo program. This computer performs at this time about 24 concurrent functions, with iteration rates from 10 times per second to once every two seconds. These jobs were tabulated in a machine-independent form, and statistics of the overall job set were obtained. It was concluded, based on a comparison of simulation and Markov results, that the Markov process analysis is accurate in predicting overall trends and in configuration comparisons, but does not provide useful detailed information in specific situations. Using both types of analysis, it was determined that the job scheduling function is a critical one for efficiency of the multiprocessor. It is recommended that research into the area of automatic job scheduling be performed.

Maltach, E. G.↗

Apollo experience report: Guidance and control systems; lunar module mission programer

A review of the concept, operational requirements, design, and development of the lunar module mission programer is presented, followed by a review of component and subsystem performance during design-feasibility, design-verification, and qualification tests performed in the laboratory. The system was further proved on the unmanned Apollo 5 mission. Several anomalies were detected, and satisfactory solutions were found. These problems are defined and examined, and the corrective action taken is discussed. Suggestions are given for procedural changes to be used if future guidance and control systems of this type are to be developed.

Vernon, J. A.↗

Apollo experience report: Guidance and control systems. Mission control programmer for unmanned missions AS-202, Apollo 4, and Apollo 6

An unmanned test flight program required to evaluate the command module heat shield and the structural integrity of the command and service module/Saturn launch vehicle is described. The mission control programer was developed to provide the unmanned interface between the guidance and navigation computer and the other spacecraft systems for mission event sequencing and real-time ground control during missions AS-202, Apollo 4, and Apollo 6. The development of this unmanned programer is traced from the initial concept through the flight test phase. Detailed discussions of hardware development problems are given with the resulting solutions. The mission control programer functioned correctly without any flight anomalies for all missions. The Apollo 4 mission control programer was reused for the Apollo 6 flight, thus being one of the first subsystems to be reflown on an Apollo space flight.

Holloway, G. F.↗

Orbital navigation and guidance

The verification of the orbital flight mode initialization, orbital navigation, orbital guidance, and telemetry acquisition functions was described. The output of the 6D/LVDC simulator is used for this verification.

Source record↗

Approach guidance for outer planet Pioneer missions

An overall parametric system analysis of the use of an optical approach guidance measurement system (using a V-slit electrooptical 'star-pipper') onboard a Pioneer-type spin-stabilized spacecraft for outer planet missions. Optical measurements of satellites of Saturn and Uranus against the star background are considered. Measurement geometry and spacecraft attitude are evaluated in depth with respect to two Pioneer missions: Saturn-Uranus and Jupiter-Uranus atmospheric entry probe missions with departure from Earth in November/December, 1980. A preliminary evaluation of long-term attitude stability measurements of Pioneer 10 is presented in the Appendix. The major conclusions are: (1) at Saturn flyby, viewing some medium period satellites can provide the best measurement results. (2) At Uranus approach, viewing the planet may give best measurements if early bus-probe separation is required. (3) Final measurement accuracy depends on the data format transmitted to Earth and the applied data interpretation techniques.-

Bejczy, A. K.↗

SEPS guidance and navigation autonomy selection via mission analysis

A systematic rationale for selecting a cost-effective guidance and navigation (G & N) autonomy level for the solar electric propulsion stage (SEPS) vehicle is developed. After a definition of autonomy levels, a mission analysis is performed for representative SEPS missions using realistic G & N sensor hardware. Cost data for fabricating, integrating and refurbishing onboard avionics hardware and the ground costs corresponding to each autonomy level are generated. Results are presented that indicate performance of various G & N sensor hardware sets and the dominating factors which influence G & N autonomy level selection.

Causey, W.↗

Design constraints of the LST fine guidance sensor

The LST Fine Guidance Sensor design is shaped by the rate of occurrence of suitable guide stars, the competition for telescope focal plane space with the Science Instruments, and the sensitivity of candidate image motion sensors. The relationship between these parameters is presented, and sensitivity to faint stars is shown to be of prime importance. An interferometric technique of image motion sensing is shown to have improved sensitivity and, therefore, a reduced focal plane area requirement in comparison with other candidate techniques (image-splitting prism and image dissector tube techniques). Another design requirement is speed in acquiring the guide star in order to maximize the time available for science observations. The design constraints are shown parametrically, and modelling results are presented.

Wissinger, A. B.↗

Time-controlled descent guidance in uncertain winds

A procedure has been developed for constructing a statistical model of the altitude-dependent mean wind profile from the historical record of wind measurements at particular locations. The model is constructed by fitting a Markov process, with altitude as the stage variable, to the historical wind data. The wind model, together with the aircraft dynamics and the error characteristics of the navigation system, are incorporated in the design of a state estimator, which gives the minimum variance estimate of the aircraft state and the wind vector. The state and wind estimates are used as inputs to a linear feedback law for guiding the aircraft along the nominal trajectory. An example design of a time-constrained (4D RNAV) descent guidance system is presented, showing tracking accuracy, control activity, and probability of arrival time with and without the wind estimator.

Menga, G.↗

System design impact of guidance and navigation analysis for a SEPS 1979 Encke flyby

Baseline guidance and navigation strategy for an ecliptic projection of the Encke flyby mission consider solar electric propulsion stage parameters in generating optimized and targeted trajectory control. Results show the Encke relative approach error to be dominated by ephemerical uncertainties, particularly the velocity components.

Hong, P.↗

Flight evaluation of two-segment approaches using area navigation guidance equipment

A two-segment noise abatement approach procedure for use on DC-8-61 aircraft in air carrier service was developed and evaluated. The approach profile and procedures were developed in a flight simulator. Full guidance is provided throughout the approach by a Collins Radio Company three-dimensional area navigation (RNAV) system which was modified to provide the two-segment approach capabilities. Modifications to the basic RNAV software included safety protection logic considered necessary for an operationally acceptable two-segment system. With an aircraft out of revenue service, the system was refined and extensively flight tested, and the profile and procedures were evaluated by representatives of the airlines, airframe manufacturers, the Air Line Pilots Association, and the Federal Aviation Adminstration. The system was determined to be safe and operationally acceptable. It was then placed into scheduled airline service for an evaluation during which 180 approaches were flown by 48 airline pilots. The approach was determined to be compatible with the airline operational environment, although operation of the RNAV system in the existing terminal area air traffic control environment was difficult.

Schwind, G. K.↗

Simulation, guidance and navigation of the B-737 for rollout and turnoff using MLS measurements

A simulation program is described for the B-737 aircraft in landing approach, a touchdown, rollout and turnoff for normal and CAT III weather conditions. Preliminary results indicate that microwave landing systems can be used in place of instrument landing systems landing aids and that a single magnetic cable can be used for automated rollout and turnoff. Recommendations are made for further refinement of the model and additional testing to finalize a set of guidance laws for rollout and turnoff.

Pines, S.↗

Proposed powered explicit guidance thrust integrals derivation/implementation. Mission planning, mission analysis and software formulation

A new exoatmospheric, powered explicit guidance (PEG) thrust integral formulation and a simple method of implementation are presented. The new thrust integral formulation is significantly simpler than that currently used in PEG. Preliminary estimates indicate a computer storage savings of 220 words, which is approximately 10 percent of the current PEG ascent program. Alternate methods of implementation that could produce even more savings are noted.

Jaggers, R. F.↗

Research in ground-based near-terminal area 4D guidance and control

This paper describes work being done at NASA, Langley Research Center and at the Research Triangle Institute on advanced, ground-based guidance and control for the near terminal area. Large-scale computer traffic simulations in conjunction with flight experiments with a Boeing 737 aircraft will be used to evaluate various concepts for automated terminal area metering and spacing. The all-digital real-time air traffic simulation model is described. Facilities for aircraft tracking and for interfacing the aircraft with the digital simulation are discussed, along with possible application to other types of experiments.

Britt, C. L., Jr.↗

Terminal area guidance along curved paths: A stochastic control approach

Stochastic control theory is applied to the problem of designing a digital flight compensator for terminal guidance along a helical flight path as a prelude to landing. The development of aircraft, wind, and measurement models is discussed along with a control scheme consisting of feedback gains multiplying estimate of the aircraft and wind states obtained from a Kalman one step predictor. Preliminary results are presented which indicate that the compensator performs satisfactorily in the presence of both steady winds and gusts.

Quaranta, J. E.↗

Investigation of the use of an electronic multifunction display and an electromechanical horizontal situation indicator for guidance and control of powered-lift short-haul aircraft

The use which pilots make of a moving map display from en route through the terminal area and including the approach and go-around flight phases was investigated. The content and function of each of three primary STOLAND displays are reviewed from an operational point of view. The primary displays are the electronic attitude director indicator (EADI), the horizontal situation indicator (HSI), and the multifunction display (MFD). Manually controlled flight with both flight director guidance and raw situation data is examined in detail in a simulated flight experiment with emphasis on tracking reference flight plans and maintaining geographic orientation after missed approaches. Eye-point-of-regard and workload measurements, coupled with task performance measurements, pilot opinion ratings, and pilot comments are presented. The experimental program was designed to offer a systematic objective and subjective comparison of pilots' use of the moving map MFD in conjunction with the other displays.

Clement, W. F.↗

NASA Office of Aeronautics and Space Technology Summer Workshop. Volume 3: Navigation, guidance and control panel

User technology requirements are identified in relation to needed technology advancement for future space missions in the areas of navigation, guidance, and control. Emphasis is placed on: reduction of mission support cost by 50% through autonomous operation, a ten-fold increase in mission output through improved pointing and control, and a hundred-fold increase in human productivity in space through large-scale teleoperator applications.

Source record↗

Optimization of the space shuttle entry guidance lateral deadband, minimum bank angle logic

The lateral deadband and minimum bank angle schedule were studied. Results used by the analytic drag control entry guidance system are presented. Lateral deadband limits and configuration were investigated and possible changes in the minimum bank angle schedule to improve crossrange control and drag acceleration control for entry were examined. The study recommends a 12.5 deg lateral deadband to accommodate low dispersions of up to 23%.

Bump, P. B.↗