Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAVITY WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Dynamics, winds, circulation and turbulence in the atmosphere of Venus

With the possible exception of the lowest one or two scale heights, the dominant mode of circulation of Venus' atmosphere is a rapid, zonal, retrograde motion. Global albedo variations in the ultraviolet may reflect planetary scale waves propagating relative to the zonal winds. Other special phenomena such as cellular convection in the subsolar region and internal gravity waves generated in the interaction of the zonal circulation with the subsolar disturbance may also be revealed in ultraviolet imagery of the atmosphere. We discuss the contributions of experiments on the Orbiter and Entry Probes of Pioneer Venus toward unravelling the mystery of the planet's global circulation and the role played by waves, instabilities and convection therein

Schubert, G.↗

Atmospheric sound propagation

The propagation of sound waves at infrasonic frequencies (oscillation periods 1.0 - 1000 seconds) in the atmosphere is being studied by a network of seven stations separated geographically by distances of the order of thousands of kilometers. The stations measure the following characteristics of infrasonic waves: (1) the amplitude and waveform of the incident sound pressure, (2) the direction of propagation of the wave, (3) the horizontal phase velocity, and (4) the distribution of sound wave energy at various frequencies of oscillation. Some infrasonic sources which were identified and studied include the aurora borealis, tornadoes, volcanos, gravity waves on the oceans, earthquakes, and atmospheric instability waves caused by winds at the tropopause. Waves of unknown origin seem to radiate from several geographical locations, including one in the Argentine.

Cook, R. K.↗

Synthetic aperture radar imaging of ocean waves during the Marineland experiment

Wave contrast measurements are used to analyze X and L-band simultaneously obtained synthetic aperture radar (SAR) data of ocean gravity waves collected during the Marineland Experiment (1975). The results of the wave contrast measurements show that the ocean waves imaged by a SAR are more discernible using an X-band frequency than an L-band frequency and when the ocean waves are traveling in the range direction. It is determined that ocean waves can be detected by both X and L-band SAR, provided that the radar surface resolution is a small compared to the ocean wavelength. In addition, wave detection using L-band SAR can be improved by adjusting the focal distance and rotation of the cylindrical telescope in the SAR optical processor to account for wave motion. This adjustment is determined to be proportional to a value that is near the wave phase velocity.

Shuchman, R. A.↗

The galloping chromosphere

Oscillating velocity fields can be observed on H-alpha filtergrams as a shifting pattern of intensity fluctuations known as 'the galloping chromosphere'. The characteristics of this activity are those of horizontal running waves of typical period of about 300 sec and long wavelength (about 20,000 km) that can be interpreted as acoustic-gravity waves propagating in the acoustic domain. Periods are longer in dark, structured regions, and in fibrils, and the change is quantitatively consistent with the reduction of resonance frequency in a magnetic field of 1 to 10 gauss. These easily observed fluctuations thus offer a means of estimating magnetic-field strength at specific locations in the chromosphere. Phase velocities are high, ranging upward from typical values between 50 and 100 km per sec, and tending to be lower in active regions and toward the limb.

Sawyer, C.↗

Instabilities and turbulence at mesospheric heights as observed by VHF radar

Very High Frequency (VHF) radar operating at frequencies near 50 MHz can simultaneously measure mean winds, waves, and turbulence at scales equal to half the radar wavelength. Harper and Woodman (1977) pointed out that short-period evanescent gravity waves act as a direct energy source for turbulence at mesospheric heights. A few examples of observational results of strong mesospheric turbulence bursts are presented and compared with recently observed turbulence bursts in a tropospheric jet stream to gain insight into the generation mechanism.

Ruster, R.↗

Quantitative study on dispersion relations of TIDs observed by an HF Doppler array

A quantitative study on the dispersion relation of traveling ionospheric disturbances (TIDs) was performed by using data obtained by an HF Doppler array. Observed data at three stations are digitized continuously with a sampling period of 10 sec. A schematic illustration of a running analysis method is given. Fourier components omega's and their wave vectors k's of the TIDs are calculated from these subset data from three stations by means of the cross-spectrum analysis. Diagrams of horizontal trace velocity V sub ph versus wave period T were also obtained. From these diagrams one can see clear cutoff periods of the internal mode of the atmospheric gravity waves. A morphological classification of the mode of the omega - k and V sub ph - T obtained through one year was performed. The estimation of the horizontal velocity vectors of the thermospheric wind form their dispersion relations was performed also. A key point of the method of obtaining the vectors is to estimate the tilt, in azimuthally different omega - k diagrams, of a resonant branch ascribed to the Brunt oscillations.

Tsutsui, M.↗

Seasonal variation of turbulence intensities in the upper mesosphere and lower thermosphere measured by radar techniques

Since February 1985, the 2 MHz narrow beam radar operated by the University of Adelaide in Australia has been used to measure the short term root-mean-square fluctuating velocities of radio wave scatterers in the upper middle atmosphere (80 to 100 km). These measured fluctuations are caused by a mixture of turbulence and gravity waves, and under certain reasonable assumptions the turbulent contribution can be extracted. The results of these measurements were discussed in detail by Hocking (1988). These results are summarized and the data set is extended to include 1987.

Hocking, W. K.↗

AMPS data management requirements study, appendix 1

Flow charts and display formats for the simulation of five experiments are given. The experiments are: (1) electromagnetic wave transmission; (2) passive observations of ambient plasma; (3) ionospheric measurements with subsatellite; (4) electron accelerator beam measurements; and (5) measurement of acoustical gravity waves in the sodium layer using lasers. A detailed explanation of the simulation procedure, definition of variables, and an explanation of how the experimenter makes display choices is also presented. A functional description is included on each flow chart and the assumptions and definitions of terms and scope of the flow charts and displays are presented.

Source record↗

Group-kinetic theory and modeling of atmospheric turbulence

A group kinetic method is developed for analyzing eddy transport properties and relaxation to equilibrium. The purpose is to derive the spectral structure of turbulence in incompressible and compressible media. Of particular interest are: direct and inverse cascade, boundary layer turbulence, Rossby wave turbulence, two phase turbulence; compressible turbulence, and soliton turbulence. Soliton turbulence can be found in large scale turbulence, turbulence connected with surface gravity waves and nonlinear propagation of acoustical and optical waves. By letting the pressure gradient represent the elementary interaction among fluid elements and by raising the Navier-Stokes equation to higher dimensionality, the master equation was obtained for the description of the microdynamical state of turbulence.

Tchen, C. M.↗

Relic High Frequency Gravitational waves from the Big Bang and How to Detect Them

This paper shows how entropy generation from numerical density calculations of relic gravitons can be measured via the Li-Baker high-frequency gravity wave (HFGW) detector, and suggests the implications this has for the physics of early-universe phase transitions. This paper indicates the role of Ng's revised statistics in gravitational wave physics detection and the application of Baumann et al.(2007) formalism of reduction of rank-two tensorial contributions to density wave physics, using the HFGW approximation directly at the beginning as well as Li's treatment of energy density explicitly. This formalism is a way to refine and add more capacity to the Li-Baker HFGW detector in reconstructing early-universe conditions at the onset of the big bang.

79 ASTRONOMY AND ASTROPHYSICS↗

Equilibrium wave spectrum and sea state bias in satellite altimetry

For a well-developed sea at equilibrium with a constant wind, the energy-containing range of the wavenumber spectrum for wind-generated gravity waves is approximated by a generalized power law involving the angular spread function and mu, interpreted as a fractal codimension of a small surface patch. Dependence of mu on the wave age is estimated, and the 'Phillips constant', beta, along with the low-wavenumber boundary, k0, of the inertial subrange are analyzed on the basis of the wave action and energy conservation principles. The resulting expressions are employed to evaluate various non-Gaussian statistics of a weakly nonlinear sea surface, which determine the sea state bias in satellite altimetry. The locally accelerated decay of the spectral density function in a high-wavenumber dissipation subrange is pointed out as an important factor of wave dynamics and the geometrical optics treatment of the sea state bias. The analysis is carried out in the approximation of a unidirectional wave field and confined to the case of a well-developed sea.

Glazman, Roman E.↗

AMPS data management requirements study

A data simulation is presented for instruments and associated control and display functions required to perform controlled active experiments of the atmosphere. A comprehensive user's guide is given for the data requirements and software developed for the following experiments: (1) electromagnetic wave transmission; (2) passive observation of ambient plasmas; (3) ionospheric measurements with a subsatellite; (4) electron accelerator beam measurements; and (5) measurement of acoustic gravity waves in the sodium layer using lasers. A complete description of each experiment is given.

Source record↗

Ocean internal waves off the North American and African coasts from ERTS-1

Periodic features observed in the ocean portions of certain ERTS-1 images have been identified with reasonable certainty as surface manifestations of oceanic internal gravity waves. A series of images taken over the New York Bight, commencing with the 16 July 1972 overpass and continuing on into autumn of 1973, has shown the internal waves to be present when summer solar heating stratifies the water sufficiently well to support such oscillations. When fall and winter wind action mixes the shelf water down to the bottom, the waves no longer appear. In the Bight, the wavelengths range from approximately 400 to 1000 m, with the wave field being most sharply delineated near the edges of the continental shelf, at the mouth of the Hudson Canyon. They appear in packets consisting of several waves separated by 10-15 km, which propagate up on the shelf and disappear.

Apel, J. R.↗

The 4-5 day mode oscillation in zonal winds of Indian middle atmosphere during MONEX-79

In the early studies based on time series of balloon observations, the existence of 4 to 5 day period waves and 10 to 20 day wind fluctuations were found in the tropical lower stratosphere, and they are identified theoretically as the mixed Rossby-gravity wave and the Kelvin wave, respectively. On the basis of these studies, it was established that the vertically propagating equatorial waves play an important role in producing the QBO (quasi-biennial oscillation) in the mean zonal wind through the mechanism of wave-zonal interaction. These studies are mainly concentrated over the equatorial Pacific and Atlantic Oceans. Similar prominent wave disturbances have been observed over the region east of the Indian Ocean during a quasi-biennial oscillation. Zonal winds in upper troposphere and lower stratosphere (10 to 20) km of the middle atmosphere over the Indian subcontinent may bear association with the activity of summer monsoon (June-September). Monsoon Experiment (MONEX-79) has provided upper air observations at Balasore (21 deg. 30 min.N; 85 deg. 56 min.E), during the peak of monsoon months July and August. A unique opportunity has, therefore, been provided to study the normal oscillations present in the zonal winds of lower middle atmosphere over India, which may have implication on large scale wave dynamics. This aspect is examined in the present study.

Reddy, R. S.↗

Simultaneous fine structure observation of wind and temperature profiles by the Arecibo 430-MHz radar and in situ measurements

A simultaneous campaign of balloon and radar measurements took place on March 14 to 16, 1984, above the Arecibo 430-MHz radar. This radar was operating with a vertical resolution of 150 m following two antenna beam directions: 15 deg. from the zenith, respectively, in the N-S and E-W directions. The main results concerning the comparison between the flight and simultaneous radar measurements obtained on March 15, 1984 are analyzed. The radar return power profile (S/N ratio in dB) exhibits maxima which are generally well correlated with step-like structures in the potential temperature profile. These structures are generally considered as the consequence of the mixing processes induced by the turbulence. A good correlation appears in the altitude range 12.5 to 19 km between wind shears induced by a wave structure observed in the meridional wind and the radar echo power maxima. This wave structure is characterized by a vertical wavelength of about 2.5 km, and a period in the range 30 to 40 hours. These characteristics are deduced from the twice daily rawinsonde data launched from the San Juan Airport by the National Weather Service. These results pointed out an example of the interaction between wave and turbulence in the upper troposphere and lower stratosphere. Turbulent layers are observed at locations where wind shears related to an internal inertia-gravity wave are maxima.

Thomas, D.↗

Parameterization of planetary wave breaking in the middle atmosphere

A parameterization of planetary wave breaking in the middle atmosphere has been developed and tested in a numerical model which includes governing equations for a single wave and the zonal-mean state. The parameterization is based on the assumption that wave breaking represents a steady-state equilibrium between the flux of wave activity and its dissipation by nonlinear processes, and that the latter can be represented as linear damping of the primary wave. With this and the additional assumption that the effect of breaking is to prevent further amplitude growth, the required dissipation rate is readily obtained from the steady-state equation for wave activity; diffusivity coefficients then follow from the dissipation rate. The assumptions made in the derivation are equivalent to those commonly used in parameterizations for gravity wave breaking, but the formulation in terms of wave activity helps highlight the central role of the wave group velocity in determining the dissipation rate. Comparison of model results with nonlinear calculations of wave breaking and with diagnostic determinations of stratospheric diffusion coefficients reveals remarkably good agreement, and suggests that the parameterization could be useful for simulating inexpensively, but realistically, the effects of planetary wave transport.

Garcia, Rolando R.↗

A Notional Artemis Lunar Surface Exploration Package (ArLSEP) based on the Gandalf Staff Platform

Introduction: The Artemis program is planning to deliver crew and cargo to the lunar surface, but there is no current package for supporting lunar in-struments and experiments similar to the Apollo Lunar Surface Exploration Package (ALSEP). This abstract provides a possible concept for such a package using the Gandalf Staff Platform as a common core. Gandalf Staff: The Gandalf Staff is an early prototype system developed over FY’21/FY’22 using NASA Science Technology Mission Directorate (STMD) Center Information Fund (CIF) grants to de-sign, build and test “proof-of-concept” components. These components include a 24v battery powered monopole that powers a suite of subsystems, including a Graphical User Interface (GUI) for crew, surface voice and data communications, Lunar Search and Rescue (LunaSAR) navigation and communications, LiDAR, field site external lighting, 360-degree camera, and a geothermal instrument for measuring sub-surface temperature gradient. The staff can be carried independently by an Extra-Vehicular Activity (EVA) astronaut, or can be mounted into a tripod for “hands free” support at a surface site being investigated. The staff can be attached to an external solar array and power storage system for long-duration operations. [1,2] ALSEP: An ASLEP flew on each mission Apollo 12 to Apollo 17. For Apollo 11, a simplified packaged called the Early Apollo Scientific Experiments Pack-age (EASEP) was flown. Each package included a “Central Station” that provided the power and communications connected to a variety of instruments and sensors. The power was provided by a Radioisotope Thermoelectric Generator (RTG) fueled by Plutoni-um-238 generating 70 watts of power (initially, decayed over time) [3]. The communications system provide for direct to Earth data transfer from the lunar surface. Each pack-age was stowed externally in the Lunar Module (LM) Scientific Equipment (SEQ) bay with a mass up to 163 kg (Apollo 17). The crew unloaded the ALSEP from the LM and deployed the instruments on the lunar surface. Although designed to operate for only 1 year, many sites operated for up to 8 years successfully [4]. The Active Seismic Experiment (ASE) included 3 geophones for detecting seismic waves created by mortars and thumpers deployed by the crew. Other active experiments measured the lunar atmosphere, the heat flow in the subsurface, the lunar gravity and potential gravity waves, the lunar magnetic field, the solar wind and plasma interactions in cislunar space. Passive experiments included collectors for dust and cosmic rays, and retroreflectors for precise measurements of distance using a laser from Earth. The ALSEP program continues to generate insights into lunar formation and evolution. ArLSEP Concepts: The lunar surface science package for the Artemis program will hopefully exceed the capability of the ALSEP. There are multiple issues for discussion leading to the design of a new ArLSEP, needing requirements definition from the science community, NASA mission architecture, and NASA budget planners. 1. Delivery Mechanism Two possible projects currently provide capability to deliver scientific cargo to the lunar surface: 1) the Commercial Lunar Payload Services (CLPS) [5] and the Human Landing System (HLS) [6, 7]. Each project is controlled by a different organization within NASA and budgeted with different criteria although both support lunar exploration. The HLS system delivers crew (and potentially cargo) to human landing sites. If an ArLSEP is “predeployed” to such a site, the design must include power (either from the vehicle or independently) to keep the electronics functioning until deployed by the crew. If an ArLSEP is delivered on a vehicle after the crew is present on the lunar surface, safety protocols require adequate distance from the humans for impact from descent propelled sur-face regolith ejecta. This distance can not exceed the capability of the crew to walk (if no rover) to the vehicle for ArLSEP deployment. 2. Overall Guidelines The general design of ArLSEP will likely follow the ALSEP with a common system for communications and power; however, significant architecture differences between Apollo and Artemis exist. Power: The RTG will not be available for early Artemis missions nor likely follow-on Lunar Exploration Transportation Services (LETS) missions [8]. Thus, ArLSEP power must be supplied by solar arrays with sufficient battery capability to “keep alive” necessary electronics during any lunar surface eclipse period. Communication: The Artemis program is developing a series of communications satellites for lunar orbit to provide surface transmission of data and voice to Earth. Called “LunaNET”, this network is component useful for ArLSEP since south polar locations may not always have direct “line-of-sight” to Earth [9]. 3. Concept of Operations (ConOps) The general ConOps for ArLSEP is to deliver the package to lunar surface before the crew arrives, and then have the crew deploy the package after some period of time. This requires coordinated design (for power systems) and launch window (for schedule) on both the cargo and crew missions. Once the ArLSEP is deployed, it will operate autonomously for a number of years. It should be designed to be EVA compatible for crew maintenance and upgrade. 4. Notional Design (for discussion purpose only) The landing site near the South Pole is expected to have no eclipse cycle exceeding 5 days, so the “keep alive” power is 144 hours (6 days to include margin). A 12v ArLSEP will use rechargeable LiFePO4 cells, which are common in the Electric Vehicle (EV) industry. With a current of 5 amps and a 125 watt system, the mass is about 90kg. The comm. system and structure adds another 10kg, thus the “Central Station” is approximately 100kg. The solar power is collected on four arrays (each 2m above the surface), and the entire ArLSEP is designed to stow in a 2m x 1m x 1m volume. The experiment and instrument design will vary for each installation and add mass to the total (although they are expected to fit within the 2m3 volume). Seismic wave generation will likely not be provided with mortars, thus an electric “thumper” will be required. Active instruments such as imaging systems and sensing instruments will benefit from the additional power and communication capability provided by ArLSEP. Passive systems such as retroreflectors, witness plates, and cosmic dust collectors can be added to either the landing vehicle and/or the ArLSEP. With repeated HLS missions to the same human site, the ArLSEP can be expanded and easily maintained for long duration science collection on the lunar surface.

ALSEP↗