Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Spatiotemporal features of traffic help reduce automatic accident detection time

Quick and reliable automatic detection of traffic accidents is of paramount importance to save human lives in transportation systems. However, automatically detecting when accidents occur has proven challenging, and minimizing the time to detect accidents (TTDA) by using traditional features in machine learning (ML) classifiers has plateaued. We hypothesize that accidents affect traffic farther from the accident location than previously reported. Therefore, leveraging traffic signatures from neighboring sensors that are adjacent to accidents should help improve their detection. We confirm this hypothesis by using verified ground-truth accident data, traffic data from radar detection system sensors, and light and weather conditions and show that we can minimize the TTDA while maximizing classification performance by considering spatiotemporal features of traffic. Specifically, we compare the performance of different ML classifiers (i.e, logistic regression, random forest, and XGBoost) when controlling for different numbers of neighboring sensors and TTDA horizons. We use data from interstates 75 and 24 in the metropolitan area that surrounds Chattanooga, TN. Our results show that the XGBoost classifier produces the best results by detecting accidents as quickly as 1.0 min after their occurrence with an area under the receiver operating characteristic curve of up to 83% and an average precision of up to 49%. We describe limitations, open challenges, and how the proposed framework can be used for quicker operational accident detection.

33 ADVANCED PROPULSION SYSTEMS↗

Convective heat transfer enhancement through additively built multiscale micro-tetrahedron features

Use of Additive Manufacturing (AM) to improve the heat transfer characteristics of tip shrouds in high-pressure turbines is being considered by industries. Existing designs of these components integrate micro-cooling channels to reduce the bulk temperature for improved life. In this research, closely packed micro tetrahedron features in addition to AM roughness has been considered. Further, this multiscale surface characteristics increased surface area per unit volume available for heat exchange. Micro-tet features were designed, manufactured, characterized, and evaluated systematically while increasing their height. An enormous increase in the overall wetted surface area by 200 % was measured. The convective heat transfer enhancement was ~3.72 times EDM rough coupon, and friction factor enhancement was ~5.5 times EDM rough coupon. Furthermore, the proposed design offers 2.5 times enhanced heat transfer for a given 2 W pumping power compared to our EDM rough coupon. Heat transfer enhancement was observed to not vary strongly with increased Reynolds number. Such complex designs are only possible through additive manufacturing for increased heat transfer with little pressure penalty. Finally, increasing the micro-tet height for increased surface area and improved heat exchange beyond an upper limit might not be a significant benefit as it gets compensated by increasing skin friction.

42 ENGINEERING↗

Validation of High-Risk Computed Tomography Features for Detection of Local Recurrence After Stereotactic Body Radiation Therapy for Early-Stage Non-Small Cell Lung Cancer

Purpose: Fibrotic changes after stereotactic body radiation therapy (SBRT) for stage I non-small cell lung cancer (NSCLC) are difficult to distinguish from local recurrences (LR), hampering proper patient selection for salvage therapy. This study validates previously reported high-risk computed tomography (CT) features (HRFs) for detection of LR in an independent patient cohort. Methods and Materials: From a multicenter database, 13 patients with biopsy-proven LR were matched 1:2 to 26 non-LR control patients based on dose, planning target volume (PTV), follow-up time, and lung lobe. Tested HRFs were enlarging opacity, sequential enlarging opacity, enlarging opacity after 12 months, bulging margin, linear margin disappearance, loss of air bronchogram, and craniocaudal growth. Additionally, 2 new features were analyzed: the occurrence of new unilateral pleural effusion, and growth based on relative volume, assessed by manual delineation. Results: All HRFs were significantly associated with LR except for loss of air bronchogram. The best performing HRFs were bulging margin, linear margin disappearance, and craniocaudal growth. Receiver operating characteristic analysis of the number of HRFs to detect LR had an area under the curve (AUC) of 0.97 (95% confidence interval [CI] 0.9-1.0), which was identical to the performance described in the original report. The best compromise (closest to 100% sensitivity and specificity) was found at ≥4 HRFs, with a sensitivity of 92% and a specificity of 85%. A model consisting of only 2 HRFs, bulging margin and craniocaudal growth, resulted in a sensitivity of 85% and a specificity of 100%, with an AUC of 0.96 (95% CI 0.9-1.0) (HRFs ≥2). Pleural effusion and relative growth did not significantly improve the model. Conclusion: We successfully validated CT-based HRFs for detection of LR after SBRT for early-stage NSCLC. As an alternative to number of HRFs, we propose a simplified model with the combination of the 2 best HRFs: bulging margin and craniocaudal growth, although validation is warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Repeatability and Reproducibility of Radiomic Features: A Systematic Review

An ever-growing number of predictive models used to inform clinical decision making have included quantitative, computer-extracted imaging biomarkers, or “radiomic features.” Broadly generalizable validity of radiomics-assisted models may be impeded by concerns about reproducibility. We offer a qualitative synthesis of 41 studies that specifically investigated the repeatability and reproducibility of radiomic features, derived from a systematic review of published peer-reviewed literature.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Influence of chain length in protic ionic liquids on physicochemical and structural features of lignins from sugarcane bagasse

We report the mechanisms behind lignin dissolution with protic ionic liquids (PILs) and their influence over lignin properties remain not fully explored. In this work, physicochemical and structural features of lignins extracted from sugarcane bagasse after pretreatment with a series of PILs (length of the cation chain combined with different anions) were assessed using analytical techniques. It was found that the lignin extracted with shorter chain length cations PILs showed the highest β-O-4 content. Opposite, the increase of the PILs cation chain length resulted in enhanced depolymerization. All lignins presented high polydispersity (>3.7), while the weight average molecular ranged from 1921 to 13,539 g/mol. The recovered [Eti][Mal] lignin presented the higher β-O-4 content and was possibly the most preserved lignin obtained. Opposite, lignin isolated from [Hex][Ac] and [Hex][For] treatments had less β-O-4 linkages attributed to the depolymerization of lignin via rupture of ether linkages generating intermediates that further repolymerized and/or depolymerized. These results suggest that the ionicity of the PIL is a crucial factor for lignin dissolution. Furthermore, these results illustrate that the proposed pretreatment using different PILs is useful to obtain high-quality lignins with distinct features and opens a new perspective for materials to match various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure-performance relationships in lignin-based transesterification vitrimers: The role of lignin structural features

Lignin has been hailed as an ideal renewable alternative for petrochemical-based prepolymers in material synthesis for a sustainable and circular economy, due to its abundant aromatic network and high carbon content. However, the properties and performance of lignin-derived macromolecules are strongly influenced by the lignin itself. While numerous studies have explored the impact of lignin content on the thermomechanical performance of lignin-based vitrimers, literature on how the inherent structural features of lignin affect these properties is scanty. In this study, hardwood organosolv lignin was fractionated in ethyl acetate, ethanol, and acetone to obtain lignin fractions with varying structural characteristics. These fractions were then modified through carboxylation and crosslinked with epoxidized soybean oil (ESO) at a hydroxyl to epoxy group ratio of 1:1 to produce lignin-based transesterification vitrimers (LVs). The thermal properties (i.e. glass transition temperature and thermal stability), tensile strength, storage modulus, and stress relaxation behavior of the LVs were studied and carefully related to the structural features of lignin. The results revealed a positive relationship between strong hydroxyl content in modified lignin and the tensile strength (5.10–9.71 MPa), storage modulus (1099.4 – 1372.8 MPa), crosslinking density, and stress relaxation of the LVs. Additionally, both the storage modulus and tensile strength exhibited a positive relationship with the ratio of rigid linkages in modified lignin, while lignin molecular weight was found to significantly impact the thermal properties of LVs (i.e Tg and thermal stability). This study not only highlights the valorization of lignin in vitrimer synthesis but also provide insights for designing lignin-based materials with tailored properties for specific applications.

Bio-based polymer↗

Status and new features of the topography beamline 1-BM after the Advanced Photon Source upgrade

The beamline 1-BM of the Advanced Photon Source (APS), a bending-magnet beamline with an effective X-ray beam size of ~100×4 mm2, has relatively comprehensive synchrotron topography and rocking curve imaging capabilities for characterization of crystals (particularly wide-bandgap semiconductors SiC, AlN, GaN, Ga2O3 etc). It is equipped with a white-beam topography stage for imaging large wafers up to 8 inches. It also has a double-crystal setup, of which the second stage can be used for monochromatic-beam topography. The first stage has different beam conditioners in the grazing-incidence geometry that can expand the vertical beam size from 4 to ~100 mm for double-crystal rocking curve imaging when it is combined with the second stage. Recently APS has been upgraded to a modern 4th-generation light source, and 1-BM has been recommissioned to its normal operation for general users with better performance. The upgraded APS leads to new features at 1-BM. The much smaller source size and higher X-ray coherence significantly improve the image resolution and contrast. The higher flux and brightness of the new source reduce exposure time, which mitigates the mechanical drifting and vibration issues. Here the main capabilities and status of 1-BM together with these new features are introduced.

X-ray topography↗

Local prediction of Laser Powder Bed Fusion porosity by short-wave infrared imaging thermal feature porosity probability maps

We report that local thermal history can significantly vary in parts during metal Additive Manufacturing (AM), leading to local defects. However, the sequential layer-by-layer nature of AM facilitates in-situ part voxelmetric observations that can be used to detect and correct these defects for part qualification and quality control. The challenge is to relate this local radiometric data with local defect information to estimate process error likelihood in future builds. This paper uses a Short-Wave Infrared (SWIR) camera to record the temperature history for parts manufactured with Laser Powder Bed Fusion (LPBF) processes. The porosity from a cylindrical specimen is measured by ex-situ micro-computed tomography (μCT). Specimen data from the SWIR camera, combined with the μCT data, are used to generate thermal feature-based porosity probability maps. The porosity predictions made by various SWIR thermal feature-porosity probability maps of a specimen with a complex geometry are scored against the true porosity obtained via μCT. The receiver operating characteristic curves constructed from the predictions for the complex sample demonstrate the porosity probability mapping methodology’s potential for in-situ based porosity detection.

36 MATERIALS SCIENCE↗

Structural features of ISG borosilicate nuclear waste glasses revealed from high-energy X-ray diffraction and molecular dynamics simulations

Vitrification is a widely accepted method to immobilize nuclear waste. Detailed structural information is critical to understand the physical and chemical behaviors, including the long-term chemical durability of these glasses that are to be stored in geological storage sites. High-energy X-ray diffraction studies are used to obtain accurate structural information of the International Simple Glass (ISG), a six-component borosilicate model nuclear waste glass with a composition (mol%) of 60.2SiO 2 -16.0B 2 O 3 -12.6Na 2 O-3.8Al 2 O 3 -5.7CaO-1.7ZrO 2 . Classical molecular dynamics (MD) simulations with recently developed effective potentials are utilized to generate structural models of the ISG glasses to provide interpretation of the high-energy X-ray structural data and additional short and medium range structural details. The atomic structure model generated from MD simulations shows an excellent agreement with high-energy X-ray diffraction, measured for the first time for ISG, with an R x value of 5.5%. Systematic investigations of the medium-range structural features of ISG are performed, built upon recent study of the short-range structure. In particular, the glass former cation oxygen polyhedral analysis show that [SiO 4 ]-[SiO 4 ] and [BO 4 ]-[SiO 4 ] connections are the most abundant while [ZrO 6 ] octohedra having higher probability to connect to another [SiO 4 ], [BO 4 ] and [BO 3 ]. Moreover, we have studied the ISG surface structure using MD simulations. Noticeable differences in terms of both chemical compositions and structural features between the bulk and surface are observed. There exist increased small-sized rings, under coordinated Si species, high 3-coordinated boron content (86.5%) on the surface. Very importantly, sodium ions are found to be enriched on the glass surface, consistent with recent experimental results. Furthermore, both bulk and surface structural information are discussed in terms of the dissolution and corrosion mechanisms of ISG and related nuclear waste glasses.

36 MATERIALS SCIENCE↗

Fine–scale structural features of intercritically aged HSLA-100 plate steel and their influence on yield strength and low-temperature impact toughness

Highlights: • The fine-scale microstructure of HSLA-100 steel intercritically aged at 677 °C was characterized. • Continuous austenite films evolved into isolated islands; large islands transformed to brittle martensite upon quenching. • Copper precipitates in martensite were coarse, and some sub-grain coarsening occurred within martensite. • Intercritically aged steel possessed an inferior strength-toughness balance as compared with sub-critically aged steel. - Abstract: Fine-scale structural features of an HSLA-100 steel intercritically aged at 950 K (677 °C) for 4.2 ks (70 min.) were investigated via transmission electron microscopy. The microstructure consisted of approximately 90 vol. pct. of low‑carbon lath martensite. Average lath width was about 0.25 μm, unchanged from the as-quenched condition, owing to a high number density of epsilon‑copper precipitates at these boundaries. About 10 vol. pct. of medium‑carbon austenite existed as coarsened, broken-up islands between laths; martensite lath boundary coverage by austenite was notably reduced compared to the as-quenched condition. Greater continuity between adjacent low‑carbon martensite laths was accompanied by coarse copper precipitates within laths and an order of magnitude lower dislocation density than the as-quenched martensite. Collectively, these features produced a sub-grain coarsening effect. Austenite islands larger than about 0.5 μm were unstable with respect to the formation of fresh, medium‑carbon martensite regions. Copper precipitation within austenite islands (owing to carbon and copper enrichment) might also have contributed to austenite transformation upon quenching. Intercritical aging was associated with a strong-and-undesirable deviation from strength-toughness behavior at sub-critical aging temperatures. Two key factors were identified as being responsible for this negative outcome: (i) a sub-grain coarsening effect associated with “delamellarization” of low‑carbon martensite and austenite and (ii) the formation of brittle martensite upon quenching. Quantitative estimates of the changes in strength and impact toughness are provided for microstructural differences between intercritically aged and subcritically aged material.

36 MATERIALS SCIENCE↗

Effects of initial microstructures on serrated flow features and fracture mechanisms of a nickel-based superalloy

Highlights: • Uniaxial tensile tests are performed on a nickel-based superalloy at 473 K–973 K and low strain rates. • Effects of initial microstructures on serrated flow features, and fracture characteristics are analyzed. • The dislocation across slip in the matrix is responsible for the serrated flow. • Nucleation and growth of micro-voids is the main fracture mechanism of ST and HS superalloys. • The better tensile ductility is obtained with raising the deformation temperatures for the SAT superalloy. - Abstract: The uniaxial tensile experiments are performed on a nickel-based superalloy with different initial microstructures at intermediate temperatures (473–973) K and low strain rates (0.0001–0.001) s{sup −1}. Effects of initial microstructures on plastic deformation mechanisms, serrated flow features, and fracture characteristics are analyzed. It is clearly demonstrated that the plastic deformation mechanism of serrated flow is irrelevant to the initial microstructures, and the dislocation across slip in the matrix is responsible for the serrated flow. However, the effects of initial microstructures on fracture mechanisms are obvious, i.e., the main fracture mechanism of the ST (solution treated) and HS (solution plus γ′/γ″ phases aging precipitation) superalloys are the nucleation and growth of micro-voids, which accelerates the break of carbides and interfacial failure of carbides/matrix. While for the SAT (solution plus δ phases aging precipitation) superalloy, δ phases and carbides play a significant role in the nucleation of micro-voids. Furthermore, the increase of the deformation temperature reduces the elongation to fracture of the ST and HS superalloys. However, the better tensile ductility is obtained with raising the deformation temperatures for the SAT superalloy.

36 MATERIALS SCIENCE↗

Property enhancement of CoCrNi medium-entropy alloy by introducing nano-scale features

CoCrNi -medium-entropy alloy (MEA) has been widely investigated due to its superior mechanical properties that overcome strength-ductility tradeoff. Here we show further property enhancement of CoCrNi MEA by introducing nano-scale features. Both CoCrNi and oxide dispersion strengthened (ODS) CoCrNi are fabricated by mechanical alloying and spark plasma sintering. Microstructural characterization and mechanical testing of these nanostructured MEAs revealed that the nano-scale features significantly improves the strength of the alloys. In ODS-CoCrNi MEA, Y 2 Ti 2 O 7 oxides with an average diameter of 7.3 ± 3.2 nm are incoherent with the matrix, and a specific orientation relationship exists between Y 2 Ti 2 O 7 and the matrix, which is [011] Y 2 Ti 2 O 7 //[011]Matrix, (400) Y 2 Ti 2 O 7 //(200)Matrix and ($22\bar2$) Y 2 Ti 2 O 7 //($11\bar1$)Matrix. The recrystallization and grain growth processes are effectively suppressed by the introduction of Y 2 Ti 2 O 7 nanoparticles. Strengthening mechanism analyses indicate that the strength improvement of ODS-CoCrNi is mainly ascribed to the precipitation strengthening of Y 2 Ti 2 O 7 .

36 MATERIALS SCIENCE↗

Feature review of photovoltaic modeling software utilizing blind performance assessment

While confidence in photovoltaic (PV) modeling software has always been essential, the rapid pace of new PV plant developments makes accuracy and credibility more critical than ever. Independent assessments, particularly through blind modeling comparisons, are therefore necessary to ensure unbiased benchmarking across PV modeling software. Previous studies have been limited by a narrow range of models compared, anonymized results, or system size. This study presents results from the first-ever onymous blind modeling comparison, evaluated using both lab- and utility-scale fixed-tilt, monofacial, south-facing systems at sub-hourly time intervals. Seven commercially used PV software tools were compared: 3E SynaptiQ, PlantPredict, PVsyst, RatedPower, SAM, SolarFarmer, and Solargis Evaluate. Predictions were submitted directly by software representatives, providing unique insights into each software’s implementation and resulting prediction behavior. Notable features, including plane-of-array (POA) transposition model, module temperature model, shading model, and performance model were analyzed and compared. Four summary tables compile these features of the software, serving as a resource to help users understand the methodological differences and select the most suitable software for their applications. The software tools show deviations from mean error in annual yield up to 2.5 % in the lab-scale system, increasing to 6.0 % for the utility-scale system. These differences arise from a combination of user decisions and the inherent behavior of the software, indicating the need for continuous and rigorous validation of modeling methods using these software tools against complex, real-world systems.

14 SOLAR ENERGY↗

The suitability of concentration addition for predicting the effects of multi-component mixtures of up to 17 anti-androgens with varied structural features in an in vitro AR antagonist assay

The risks associated with human exposures to chemicals capable of antagonising the effects of endogenous androgens have attracted considerable recent interest. Exposure is typically to large numbers of chemicals with androgen receptor (AR) antagonist activity, yet there is limited evidence of the combined effects of multi-component mixtures of these chemicals. A few in vitro studies with mixtures of up to six AR antagonists suggest that the concept of concentration addition (CA) provides good approximations of experimentally observed mixture effects, but studies with larger numbers of anti-androgens, and with more varied structural features, are missing. Here we show that the mixture effects of up to 17 AR antagonists, comprising compounds as diverse as UV-filter substances, parabens, perfluorinated compounds, bisphenol-A, benzo({alpha})pyrene, synthetic musks, antioxidants and polybrominated biphenyls, can be predicted well on the basis of the anti-androgenicity of the single components using the concept of CA. We tested these mixtures in an in vitro AR-dependent luciferase reporter gene assay, based on MDA-kb2 cells. The effects of further mixtures, composed of four and six anti-androgens, could be predicted accurately by CA. However, there was a shortfall from expected additivity with a ten-component mixture at two different mixture ratios, but attempts to attribute these deviations to differential expression of hormone-metabolising CYP isoforms did not produce conclusive results. CA provides good approximations of in vitro mixture effects of anti-androgens with varying structural features. -- Highlights: Black-Right-Pointing-Pointer Humans are exposed to a large number of androgen receptor antagonists. Black-Right-Pointing-Pointer There is limited evidence of the combined effects of anti-androgenic chemicals. Black-Right-Pointing-Pointer We modelled the predictability of combined effects of up to 17 anti-androgens. Black-Right-Pointing-Pointer We tested the mixture predictions in an in vitro reporter gene assay. Black-Right-Pointing-Pointer Dose addition provides good approximations of mixture effects of anti-androgens.

60 APPLIED LIFE SCIENCES↗

Evaluating the role of green infrastructure features in post-disaster recovery – Case Study of Beaumont, Texas after tropical storm imelda

While green infrastructure (GI) can provide multiple environmental benefits, its role in post-disaster economic and social recovery remains relatively underexplored. This article investigates whether different characteristics of GI, such as size, shape, connectivity, and amenities, affect the resilience of local businesses following Tropical Storm Imelda in Beaumont, Texas. The study utilizes SafeGraph mobility data to analyze foot traffic patterns to local businesses before, during, and after the disaster. FRAGSTATS indices measure GI characteristics (e.g., area, shape index, fractal dimension, proximity) while park features such as sports facilities, playgrounds, water features, and accessibility are cataloged through manual observation. Ordinary Least Squares regression models assess the relationship between park characteristics and post-recovery business performance, controlling for demographic variables including income, race, and poverty levels. Results indicate that certain GI attributes significantly enhance business recovery. Points of interest within walking distance (0.5 miles) of parks demonstrated better post-recovery status compared to those beyond this range. Specifically, parks with larger areas (p < 0.01) and more complex shapes measured by fractal dimension index (p < 0.01) had the strongest positive impact on surrounding businesses' recovery. Interestingly, playgrounds showed a negative correlation with recovery (p < 0.05), likely due to flood damage rendering them unusable during the immediate recovery period. Social vulnerability factors, including higher poverty rates and minority populations, negatively affected recovery outcomes despite park proximity.

Economic resilience↗

Reprogramming of cell junction modules during stepwise epithelial to mesenchymal transition and accumulation of malignant features in vitro in a prostate cell model

Epithelial to mesenchymal transition (EMT) is pivotal in tumor metastasis. Our previous work reported an EMT model based on primary prostate epithelial cells (EP156T) which gave rise to cells with mesenchymal phenotype (EPT1) without malignant transformation. To promote prostate cell transformation, cells were maintained in saturation density cultures to select for cells overriding quiescence. Foci formed repeatedly following around 8 weeks in confluent EPT1 monolayers. Only later passage EPT1, but not EP156T cells of any passage, could form foci. Cells isolated from the foci were named EPT2 and formed robust colonies in soft agar, a malignant feature present neither in EP156T nor in EPT1 cells. EPT2 cells showed additional malignant traits in vitro, including higher ability to proliferate following confluence, higher resistance to apoptosis and lower dependence on exogenous growth factors than EP156T and EPT1 cells. Microarray profiling identified gene sets, many of which belong to cell junction modules, that changed expression from EP156T to EPT1 cells and continued to change from EPT1 to EPT2 cells. Our findings provide a novel stepwise cell culture model in which EMT emerges independently of transformation and is associated with subsequent accumulation of malignant features in prostate cells. Reprogramming of cell junction modules is involved in both steps.

60 APPLIED LIFE SCIENCES↗

Database-wide hazard modelling of the onset of DIII-D tearing modes with field features

The rate of onset (hazard) of tearing modes is modelled probabilistically using statistical learning algorithms. Axisymmetric energy-density equilibrium fields are taken as raw high-dimensional input features which are reduced with principal component analysis. Signal processing of non-axisymmetric magnetics fluctuation array data provides the target information from which to learn. Model selection, visualization and calibration assessment procedures are detailed. Here, the analysis is deployed at large scale across the DIII-D tokamak database. Standard model selection criteria suggest that the energy-density post-processed feature is a better choice for modelling the onset rate compared to the non-processed equilibrium reconstruction solution. Two example applications of the learned rate function are demonstrated: (i) proximity-to-onset discharge monitoring and (ii) database analysis showing an (expected) observational global trend that the general hazard increases as a plasma performance metric increases. An important connection between the hazard function and its use as a conditional probability generator is reviewed in the Appendix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

When will low-contrast features be visible in a STEM X-ray spectrum image?

When will a small or low-contrast feature, such as an embedded second-phase particle, be visible in a scanning transmission electron microscopy (STEM) X-ray map? This work illustrates a computationally inexpensive method to simulate X-ray maps and spectrum images (SIs), based upon the equations of X-ray generation and detection. To particularize the general procedure, an example of nanostructured ferritic alloy (NFA) containing nm-sized Y 2 Ti 2 O 7 embedded precipitates in ferritic stainless steel matrix is chosen. The proposed model produces physically appearing simulated SI data sets, which can either be reduced to X-ray dot maps or analyzed via multivariate statistical analysis. Comparison to NFA X-ray maps acquired using three different STEM instruments match the generated simulations quite well, despite the large number of simplifying assumptions used. A figure of merit of electron dose multiplied by X-ray collection solid angle is proposed to compare feature detectability from one data set (simulated or experimental) to another. The proposed method can scope experiments that are feasible under specific analysis conditions on a given microscope. As a result, future applications, such as spallation proton–neutron irradiations, core-shell nanoparticles, or dopants in polycrystalline photovoltaic solar cells, are proposed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗