Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Boundary-layer losses

The primary cause of losses in a turbine is the boundary layer that builds up on the blade and end-wall surfaces. Analytical and experimental methods for determining the friction, trailing edge, and mixing losses associated with the boundary layer are reported. The theory presented herein refers primarily to two dimensional blade section boundary layers. Methods for obtaining three dimensional blade plus end wall losses from the two-dimensional results are also discussed.

Herman W Prust, Jr.↗

Biological modulation of the earth's atmosphere

Review of the evidence that the earth's atmosphere is regulated by life on the surface so that the probability of growth of the entire biosphere is maximized. Acidity, gas composition including oxygen level, and ambient temperature are enormously important determinants for the distribution of life. The earth's atmosphere deviates greatly from that of the other terrestrial planets in particular with respect to acidity, composition, redox potential and temperature history as predicted from solar luminosity. These deviations from predicted steady state conditions have apparently persisted over millions of years. These anomalies may be evidence for a complex planet-wide homeostasis that is the product of natural selection. Possible homeostatic mechanisms that may be further investigated by both theoretical and experimental methods are suggested.

Margulis, L.↗

Investigation of acoustic radiation from supersonic turbulent jets by double-pulse holographic interferometry

A new experimental method was used to optically investigate the acoustic field radiated from supersonic jets. The method utilizes a pulse ruby laser to obtain double exposure holograms of the sound field of a supersonic jet. The jet remains on during both exposures thus eliminating the no-flow exposure. The time separation between the pulses can be varied depending on the spectral component of the radiation to be observed. Optical records were obtained for supersonic jets with exit Mach number 1.0, 1.5 and 2.0. It was found that high frequency acoustic radiation mainly originates from the regions near the nozzle exit, whereas the low frequency noise is generated from regions further downstream. These findings are consistent with the acoustic data obtained by other investigators.

Ozkul, A.↗

Study of Friction Properties of Lunar Surface Material and Its Analogs

A description is given of instruments for determining the friction properties of the surficial layer of lunar surface material returned by the Luna 16 automatic lunar station, as well as the friction properties of its analogs: andesite-basaltic sand and basalts. The experimental method and results are presented.

Ye A Dukhovskoy↗

Development and creation of conditions for the radiation of biological objects with high energy protons

Depth distribution of an absorbed proton radiation dose was studied by both calculation and experimental methods on a cylindrical, homogeneous plexiglass phantom that represented the geometric form of a dog. The basis of the heterogeneous phantom was the natural skeleton of a dog, muscle tissue was simulated by a mixture of paraffin and silica filler, and lung tissue by gelatine capsules.

Popov, V. P.↗

Aerosol size spectrum analysis using relaxation time measurement

An experimental method has been developed to measure the dynamic relaxation times of aerosol particles. The particle relaxation time (tau-p) is determined from the ratio of the velocity amplitude of an aerosol particle (v-p) to the velocity amplitude of the medium (u-g) while the aerosol is subjected to acoustic excitation of a known frequency. A differential laser Doppler velocimeter is used to measure v-p, while a microphone is used to measure u-g. From the value of tau-p, the aerodynamic diameter of the particle can be determined if the particle density is known. The method can be applied to real-time in situ measurement of size distribution of an aerosol containing both solid particles and liquid droplets in the range of 0.1-10.0-micron diameters.

Kirsch, K. J.↗

Measurement of otolith function in man

Experimental methods used to study the isolated role of the otolithic system and clinical findings contributing to the understanding of this role are considered. The abolition of gravitational stimulus in the Skylab orbital flights and the reduced-gravity environment of the moon during Apollo landings have provided unique opportunities for investigation of the otolith. Difficulties inherent in this study include the manipulation of stimuli to the otolithic receptors and the eliciting of specific quantifiable responses, while taking into account the roles played by other sensory systems, particularly the canalicular and visual systems. There are more obstacles to determining otolithic enhancement of behavioral performance than to determining otolith-based decrements in performance. The role played by components of the somatosensory system serving touch, pressure, and kinesthesis (TPK systems) is also significant in exploration of otolith function.

Graybiel, A.↗

Technology for return of planetary samples

Technological requirements of a planetary return sample mission were studied. The state-of-the-art for problems unique to this class of missions was assessed and technological gaps were identified. The problem areas where significant advancement of the state-of-the-art is required are: life support for the exobiota during the return trip and within the Planetary Receiving Laboratory (PRL); biohazard assessment and control technology; and quarantine qualified handling and experimentation methods and equipment for studying the returned sample in the PRL. Concepts for solving these problems are discussed.

Source record↗

The role of depressed metabolism in increased radio-resistance

The results of experiments on hamsters and rats to determine physiological responses to various temperature conditions are presented. The experimental methods described are considered to be applicable to future mammalian experiments in space. Renal function was examined in the golden hamster as a function of body temperature. Hamsters were also acclimated to heat and metabolic rates, body temperature, skin temperature, cardiac distribution and whole body hematocrits were measured. In addition, the effects of heat stress on the intestinal transport of sugars in the hamster and rat were studied. The biological effects of prolonged space flight and methods of simulating weightlessness are also discussed.

Musacchia, X. J.↗

Toxicity of the pyrolysis products of spacecraft materials

Data is presented which provides guides to (1) approximate temperature necessary to initiate thermodegradation of the polymeric materials tested, (2) the relative toxicity of thermodegradation products from the various materials, (3) the relative importance of carbon monoxide as the primary cause of death (as contrasted to cyanide or other toxic gases), and (4) whether or not the hazards of the fumes are confined to the time of exposure, or whether post-exposure death is likely. Two different experimental methods were employed.

Lawrence, W. H.↗

Orbital electron capture by the nucleus

The theory of nuclear electron capture is reviewed in the light of current understanding of weak interactions. Experimental methods and results regarding capture probabilities, capture ratios, and EC/Beta(+) ratios are summarized. Radiative electron capture is discussed, including both theory and experiment. Atomic wave function overlap and electron exchange effects are covered, as are atomic transitions that accompany nuclear electron capture. Tables are provided to assist the reader in determining quantities of interest for specific cases.

Bambynek, W.↗

Experimental investigation of the excess charge and time constant of minority carriers in the thin diffused layer of 0.1 ohm-cm silicon solar cells

An experimental method is presented that can be used to interpret the relative roles of bandgap narrowing and recombination processes in the diffused layer. This method involves measuring the device time constant by open-circuit voltage decay and the base region diffusion length by X-ray excitation. A unique illuminated diode method is used to obtain the diode saturation current. These data are interpreted using a simple model to determine individually the minority carrier lifetime and the excess charge. These parameters are then used to infer the relative importance of bandgap narrowing and recombination processes in the diffused layer.

Godlewski, M. P.↗

Hydrogen chemistry - Perspective on experiment and theory

A review is presented of the advantages and limitations of various experimental methods for the investigation of the kinetics of hydrogen chemistry, including classic thermal and photochemical methods and the crossed molecular beam method. Special attention is given to the flash photolysis-resonance fluorescence apparatus developed by Braun et al, in which repetitive vacuum UV flashes result in the photolytic generation of the desired species, and to the discharge-flow technique. The use of various theoretical methods for the selection or elimination of kinetic data is considered in a brief discussion of the rate theory of two-body encounters and recombination-dissociation processes in neutral reactions. Recent kinetic studies of a series of OH reactions and of a major loss process for odd H in the stratosphere are summarized.

Kaufman, F.↗

A device for rapid determination of thermophysical properties of phase-change wind-tunnel models

An experimental method for direct measurement of the thermophysical properties of wind tunnel heat transfer models was developed. The technique consists of placing the model under a bank of high intensity, radiant heaters so that the fast opening water cooled shutters, which isolate the heater bank from the model, allow a step-input heat rate to be applied. Measurements of the heat transfer rate coupled with a surface-temperature time history of the same material are sufficient to determine the material thermophysical properties. An infrared thermometer is used to measure model surface temperature and a slug calorimeter provides heat transfer rate information. The output from the infrared thermometer and calorimeter is then fed into an analog-to-digital converter which provides digitized data to a computer. This computer then calculates combined thermophysical properties and a teleprinter prints out all the data. Thus, results are available within 7 minutes of test initiation as opposed to the weeks or months required using prior techniques.

Creel, T. R., Jr.↗

General aviation crash safety program at Langley Research Center

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Thomson, R. G.↗

Meteorological radar facility (MRF) slot conductance investigations

A preliminary meteorological radar facility (MRF) array design was completed in support of the slot conductance measurement program. Three different slot measurement techniques were evaluated. The selection of the probe comparison measurement technique was selected as the principal experimental method with the impedance measurement technique chosen to measure a few higher conductance slots to be used as reference slots. The impedance of 43 slots in 0.9 x 0.4 inch standard waveguide and of 40 slots in 0.835 x 0.4 inch waveguide was measured. Also, impedance measurements were made of a few slots using image planes to simulate mutual coupling effects. The measured and theoretical conductance, susceptance, and radiation phase data are presented in graphic form as a function of slot displacement for constant slot length, and of slot length for constant slot displacement. It is concluded that the proposed MRF array design approach is a feasible one.

Ratkevich, A. E.↗

Gray-level transformations for interactive image enhancement.

A gray-level transformation method suitable for interactive image enhancement is presented. It is shown that the well-known histogram equalization technique is a special case of this method. Experimental results which establish the superiority of the procedure over histogram equalization are also described.

Gonzalez, R. C.↗