Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Engine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C

Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.

Bian, Wenjuan↗
DOE OSTI2022

Permeability-Engineered Compartmentalization Enables In Vitro Reconstitution of Sustained Synthetic Biology Systems

In nature, biological compartments such as cells rely on dynamically controlled permeability for matter exchange and complex cellular activities. Likewise, the ability to engineer compartment permeability is crucial for in vitro systems to gain sustainability, robustness, and complexity. However, rendering in vitro compartments such a capability is challenging. Here, a facile strategy is presented to build permeability-configurable compartments, and marked advantages of such compartmentalization are shown in reconstituting sustained synthetic biology systems in vitro. Through microfluidics, the strategy produces micrometer-sized layered microgels whose shell layer serves as a sieving structure for biomolecules and particles. In this configuration, the transport of DNAs, proteins, and bacteriophages across the compartments can be controlled an guided by a physical model. Through permeability engineering, a compartmentalized cell-free protein synthesis system sustains multicycle protein production; ≈100 000 compartments are repeatedly used in a five-cycle synthesis, featuring a yield of 2.2 mg mL -1 . Further, the engineered bacteria-enclosing compartments possess near-perfect phage resistance and enhanced environmental fitness. In a complex river silt environment, compartmentalized whole-cell biosensors show maintained activity throughout the 32 h pollutant monitoring. It is anticipated that permeability-engineered compartmentalization should pave the way for practical synthetic biology applications such as green bioproduction, environmental sensing, and bacteria-based therapeutics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Engineering a Non‐Natural Photoenzyme for Improved Photon Efficiency**

Abstract Photoenzymes are biological catalysts that use light to convert starting materials into products. These catalysts require photon absorption for each turnover, making quantum efficiency an important optimization parameter. Flavin‐dependent “ene”‐reductases (EREDs) display latent photoenzymatic activity for synthetically valuable hydroalkylations; however, protein engineering has not been used to optimize this non‐natural function. We describe a protein engineering platform for the high throughput optimization of photoenzymes. A single round of engineering results in improved catalytic function toward the synthesis of γ, δ, ϵ‐lactams, and acyclic amides. Mechanistic studies show that key mutations can alter the enzyme's excited state dynamics, enhance its photon efficiency, and ultimately increase catalyst performance. Transient absorption spectroscopy reveals that engineered variants display dramatically decreased radical lifetimes, indicating an evolution toward a concerted mechanism.

Nicholls, Bryce T.↗
DOE OSTI2014

Cell-free metabolic engineering: Biomanufacturing beyond the cell

Industrial biotechnology and microbial metabolic engineering are poised to help meet the growing demand for sustainable, low-cost commodity chemicals and natural products, yet the fraction of biochemicals amenable to commercial production remains limited. Common problems afflicting the current state-of-the-art include low volumetric productivities, build-up of toxic intermediates or products, and byproduct losses via competing pathways. To overcome these limitations, cell-free metabolic engineering (CFME) is expanding the scope of the traditional bioengineering model by using in vitro ensembles of catalytic proteins prepared from purified enzymes or crude lysates of cells for the production of target products. In recent years, the unprecedented level of control and freedom of design, relative to in vivo systems, has inspired the development of engineering foundations for cell-free systems. These efforts have led to activation of long enzymatic pathways (>8 enzymes), near theoretical conversion yields, productivities greater than 100 mg L-1 h(-1), reaction scales of >100 L, and new directions in protein purification, spatial organization, and enzyme stability. In the coming years, CFME will offer exciting opportunities to: (i) debug and optimize biosynthetic pathways; (ii) carry out design-build-test iterations without re-engineering organisms; and (iii) perform molecular transformations when bioconversion yields, productivities, or cellular toxicity limit commercial feasibility.

Dudley, QM↗
DOE OSTI2014

X-ray Phase Contrast Imaging of Calcified Tissue and Biomaterial Structure in Bioreactor Engineered Tissues

Tissues engineered in bioreactor systems have been used clinically to replace damaged tissues and organs. In addition, these systems are under continued development for many tissue engineering applications. The ability to quantitatively assess material structure and tissue formation is critical for evaluating bioreactor efficacy and for preimplantation assessment of tissue quality. These techniques allow for the nondestructive and longitudinal monitoring of large engineered tissues within the bioreactor systems and will be essential for the translation of these strategies to viable clinical therapies. X-ray Phase Contrast (XPC) imaging techniques have shown tremendous promise for a number of biomedical applications owing to their ability to provide image contrast based on multiple X-ray properties, including absorption, refraction, and scatter. In this research, mesenchymal stem cell-seeded alginate hydrogels were prepared and cultured under osteogenic conditions in a perfusion bioreactor. The constructs were imaged at various time points using XPC microcomputed tomography (µCT). Imaging was performed with systems using both synchrotron- and tube-based X-ray sources. XPC µCT allowed for simultaneous three-dimensional (3D) quantification of hydrogel size and mineralization, as well as spatial information on hydrogel structure and mineralization. Samples were processed for histological evaluation and XPC showed similar features to histology and quantitative analysis consistent with the histomorphometry. Furthermore, these results provide evidence of the significant potential of techniques based on XPC for noninvasive 3D imaging engineered tissues grown in bioreactors.

alginate microbeads↗
DOE OSTI2021

Engineering Clostridium cellulovorans for highly selective n ‐butanol production from cellulose in consolidated bioprocessing

Abstract Cellulosic n ‐butanol from renewable lignocellulosic biomass has gained increased interest. Previously, we have engineered Clostridium cellulovorans , a cellulolytic acidogen, to overexpress the bifunctional butyraldehyde/butanol dehydrogenase gene adh E2 from C. acetobutylicum for n ‐butanol production from crystalline cellulose. However, butanol production by this engineered strain had a relatively low yield of approximately 0.22 g/g cellulose due to the coproduction of ethanol and acids. We hypothesized that strengthening the carbon flux through the central butyryl‐CoA biosynthesis pathway and increasing intracellular NADH availability in C. cellulovorans adh E2 would enhance n ‐butanol production. In this study, thiolase ( thl A CA ) from C. acetobutylicum and 3‐hydroxybutyryl‐CoA dehydrogenase ( hbd CT ) from C. tyrobutyricum were overexpressed in C. cellulovorans adh E2 to increase the flux from acetyl‐CoA to butyryl‐CoA. In addition, ferredoxin‐NAD(P) + oxidoreductase ( fnr ), which can regenerate the intracellular NAD(P)H and thus increase butanol biosynthesis, was also overexpressed. Metabolic flux analyses showed that mutants overexpressing these genes had a significantly increased carbon flux toward butyryl‐CoA, which resulted in increased production of butyrate and butanol. The addition of methyl viologen as an electron carrier in batch fermentation further directed more carbon flux towards n ‐butanol biosynthesis due to increased reducing equivalent or NADH. The engineered strain C. cellulovorans adh E2‐ fnr CA ‐ thl A CA ‐ hbd CT produced n ‐butanol from cellulose at a 50% higher yield (0.34 g/g), the highest ever obtained in batch fermentation by any known bacterial strain. The engineered C. cellulovorans is thus a promising host for n ‐butanol production from cellulosic biomass in consolidated bioprocessing.

Bao, Teng↗
DOE OSTI2021

Engineered Sorghum Bagasse Enables a Sustainable Biorefinery with p-Hydroxybenzoic Acid-Based Deep Eutectic Solvent

Integrating multidisciplinary research in plant genetic engineering and renewable deep eutectic solvents (DESs) can facilitate a sustainable and economic biorefinery. In this work, we leveraged a plant genetic engineering approach to specifically incorporate C6C1 monomers into the lignin structure. By expressing the bacterial ubiC gene in sorghum, p-hydroxybenzoic acid (PB)-rich lignin was incorporated into the plant cell wall while this monomer was completely absent in the lignin of the wild-type (WT) biomass. A DES was synthesized with choline chloride (ChCl) and PB and applied to the pretreatment of the PB-rich mutant biomass for a sustainable biorefinery. The release of fermentable sugars was significantly enhanced (~190 % increase) compared to untreated biomass by the DES pretreatment. In particular, the glucose released from the pretreated mutant biomass was up to 12 % higher than that from the pretreated WT biomass. Lignin was effectively removed from the biomass with the preservation of more than half of the β-Ο-4 linkages without condensed aromatic structures. Hydrogenolysis of the fractionated lignin was conducted to demonstrate the potential of phenolic compound production. In addition, a simple hydrothermal treatment could selectively extract PB from the same engineered lignin, showing a possible circular biorefinery. These results suggest that the combination of PB-based DES and engineered PB-rich biomass is a promising strategy to achieve a sustainable closed-loop biorefinery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mono-/Bimetallic Doped and Heterostructure Engineering for Electrochemical Energy Applications

Designing efficient materials is crucial to meeting specific requirements in various electrochemical energy applications. Mono-/bimetallic doped and heterostructure engineering have attracted considerable research interest due to their unique functionalities and potential for electrochemical energy conversion and storage. However, addressing material imperfections such as low conductivity and poor active sites requires a strategic approach to design. This review explores the latest advancements in materials modified by mono-/bimetallic doped and heterojunction strategies for electrochemical energy applications. It can be subdivided into three key points: (i) the regulatory mechanisms of metal doping and heterostructure engineering for materials; (ii) the preparation methods of materials with various engineering strategies; and (iii) the synergistic effects of two engineering approaches, further highlighting their applications in supercapacitors, alkaline ion batteries, and electrocatalysis. Finally, the review concludes with perspectives and recommendations for further research to advance these technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Measurement of Residual Strain in the Cylinder Bridge of High-Pressure Die Cast A383 Engine Blocks Using Neutron Diffraction

This article describes the use of neutron diffraction to measure residual strains in high-pressure die cast aluminum alloy engine blocks. High-pressure die casting is widely used to manufacture aluminum alloy components for automobile applications such as engine blocks. Thermal gradients during this process can generate residual strain and stresses and may cause premature failure during service. Neutron diffraction can be used to measure the residual stress distributions deep inside large castings, as neutrons have much larger penetrating power than X-rays. In this work, neutron diffraction was used to measure the residual strain (in the axial and hoop directions) in the cylinder bridge region of high-pressure die cast A383 engine blocks in as-cast and heat-treated conditions. The results suggest that the residual strain in the cylinder bridge is tensile in both the axial and hoop components for both as-cast and heat-treated engines. The residual strain in hoop direction is higher than the strain in axial direction. Residual strain in axial and hoop directions is relaxed after heat treatment.

Liu, Tao↗
DOE OSTI2024

Remarks on geometric engineering, symmetry TFTs and anomalies

Abstract Geometric engineering is a collection of tools developed to establish dictionaries between local singularities in string theory and (supersymmetric) quantum fields. Extended operators and defects, as well as their higher quantum numbers captured by topological symmetries, can be encoded within geometric engineering dictionaries. In this paper we revisit and clarify aspects of these techniques, with special emphasis on ’t Hooft anomalies, interpreted from the SymTFT perspective as obstructions to the existence of Neumann boundary conditions. These obstructions to gauging higher symmetries are captured via higher link correlators for the SymTFT on spheres. In this work, we give the geometric engineering counterpart of this construction in terms of higher links of topological membranes. We provide a consistency check in the context of 5D SCFTs with anomalous 1-form symmetries, where we give two independent derivations of the anomaly in terms of higher links, one purely field theoretical and the other purely geometrical. Along the way, we also recover the construction of non-invertible duality defects in 4D$$ \mathcal{N} $$ N = 4 SYM from a geometric engineering perspective.

Physics↗
DOE OSTI2018

Expression of Gre2p improves tolerance of engineered xylose-fermenting Saccharomyces cerevisiae to glycolaldehyde under xylose metabolism

Engineered S. cerevisiae employing the xylose reductase pathway enables efficient xylose valorization to fuels and chemicals. However, toxicity of thermochemically pretreated biomass hydrolysate on S. cerevisiae is one of the key technical challenges to upgrade biomass-derived sugars including xylose and glucose into high-value products. We investigated the effect of glycolaldehyde, one of the biomass-derived highly toxic aldehyde compounds, and its combinatorial inhibitory effect with other major fermentation inhibitors commonly found in plant hydrolysate such as methylglyoxal, 5-HMF, furfural, vanillin, and acetic acid on engineered xylose-fermenting S. cerevisiae in xylose and/or glucose media. We elucidated that glycolaldehyde and methylglyoxal are the key inhibitory short-aliphatic aldehydes on engineered xylose-fermenting S. cerevisiae in xylose-containing medium. Indeed, the degree of toxicity of these tested fermentation inhibitors varies with the sole carbon source of the medium. We demonstrate that genome integration of an extra copy of autologous GRE2 with its native promotor substantially improved the toxic tolerance of engineered xylose-fermenting S. cerevisiae to major inhibitory compounds including glycolaldehyde in the xylose-containing medium, and xylose-rich, lignocellulosic hydrolysate derived from Miscanthus giganteus, and concurrently improved the ethanol fermentation profile. In conclusion, outcomes of this study will aid the development of next-generation robust S. cerevisiae strains for efficient fermentation of hexose and pentose sugars found in biomass hydrolysate.

09 BIOMASS FUELS↗
DOE OSTI2022

Artificial-intelligence-based prediction and control of combustion instabilities in spark-ignition engines

In recent years, as engine control strategies have grown increasingly sophisticated in a continued drive for increasing efficiency and reducing emissions, engine operation has been pushed into regimes that are limited by combustion instabilities. These instabilities produce undesirable abnormal combustion events, which pose barriers to further improvement in engine efficiency. Many of the phenomena involved are difficult to model or control using traditional, purely physics-based models and reactive control approaches. Artificial intelligence (AI) techniques offer some promise for achieving more effective combustion stability control, especially when appropriately applied within a physics-informed framework. This chapter illustrates the current state-of-the-art in applying AI to combustion stability control and examines three case studies with application to the dilute stability limit in spark-ignition engines to illustrate the utility and limitations of AI in these applications.

Maldonado Puente, Bryan↗
DOE OSTI2019

Impact of ethanol blending into gasoline on aromatic compound evaporation and particle emissions from a gasoline direct injection engine

This study examined the interactions of ethanol with aromatic compounds on aromatic species evolution during gasoline evaporation and the consequent impacts on particle emissions from a single-cylinder, gasoline direct injection engine. From a chemical kinetic standpoint, the dilution of the aromatic species in gasoline by ethanol blending should reduce particle emissions because aromatics are the primary species that form particles during gasoline combustion. However, increased evaporative cooling from the ethanol and ethanol's effect on when aromatics in the fuel droplet (or surface film or pool) evaporate can drive an increase in particle emissions. The objective of this study was to quantify these competing effects. The results show that a combination of ethanol's increased evaporative cooling and impact on aromatic compound vapor-liquid equilibrium can extend droplet lifetime and cause aromatics to evaporate later in the droplet evaporation process than would be the case without ethanol. When fuels were burned in a direct-injection single-cylinder engine at high speed (2500 rpm) and relatively high load, ethanol blending caused an increase in particle emissions for fuels containing a low vapor pressure aromatic. At a lower speed (1500 rpm), no statistically significant increase in particle emissions was observed, likely because more time was available for evaporation and mixing to occur. In contrast, particle emissions from a fuel blended with a high vapor pressure aromatic were either insensitive to or reduced by ethanol blending, likewise to engine operating conditions. Current models for predicting particle emissions from gasoline engines, such as particulate matter index (PMI), generally lack variables for non-linear interactions between ethanol and gasoline hydrocarbons. To identify nonlinear interactions between predictor variables that might better explain the observed particle emissions, the least absolute shrinkage and selection operator (LASSO) regularized regression approach was employed. Among the predictor variables evaluated was the Yield Sooting Index (YSI) which is as an improved measure to quantify the aromatic's chemical tendency to generate particle emissions. Following this analysis, two variables were selected based on their frequent appearance. The first was ethanol mole percent multiplied by aromatic mole percent divided by aromatic vapor pressure [(EtOH * Aro%)/Aro VP@443 K]. The second was aromatic mole percent multiplied by aromatic YSI divided by aromatic molecular weight [(Aro% * Aro YSI)/Aro MW]. The results of linear regression including only these two combined explanatory variables achieved an r 2 = 0.959, substantially improved over the PMI model (r 2 = 0.688) and provides insight into how the PMI formalism might be modified to account for non-linear oxygenate-hydrocarbon coupling.

09 BIOMASS FUELS↗
DOE OSTI2013

Engineering tubular bone using mesenchymal stem cell sheets and coral particles

Highlights: • We developed a novel engineering strategy to solve the limitations of bone grafts. • We fabricated tubular constructs using cell sheets and coral particles. • The composite constructs showed high radiological density and compressive strength. • These characteristics were similar to those of native bone. -- Abstract: The development of bone tissue engineering has provided new solutions for bone defects. However, the cell-scaffold-based approaches currently in use have several limitations, including low cell seeding rates and poor bone formation capacity. In the present study, we developed a novel strategy to engineer bone grafts using mesenchymal stem cell sheets and coral particles. Rabbit bone marrow mesenchymal stem cells were continuously cultured to form a cell sheet with osteogenic potential and coral particles were integrated into the sheet. The composite sheet was then wrapped around a cylindrical mandrel to fabricate a tubular construct. The resultant tubular construct was cultured in a spinner-flask bioreactor and subsequently implanted into a subcutaneous pocket in a nude mouse for assessment of its histological characteristics, radiological density and mechanical property. A similar construct assembled from a cell sheet alone acted as a control. In vitro observations demonstrated that the composite construct maintained its tubular shape, and exhibited higher radiological density, compressive strength and greater extracellular matrix deposition than did the control construct. In vivo experiments further revealed that new bone formed ectopically on the composite constructs, so that the 8-week explants of the composite sheets displayed radiological density similar to that of native bone. These results indicate that the strategy of using a combination of a cell sheet and coral particles has great potential for bone tissue engineering and repairing bone defects.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Efficient myogenic differentiation of human adipose-derived stem cells by the transduction of engineered MyoD protein

Highlights: •MyoD was engineered to contain protein transduction domain and endosome-disruptive INF7 peptide. •The engineered MyoD-IT showed efficient nuclear targeting through an endosomal escape by INF7 peptide. •By applying MyoD-IT, human adipose-derived stem cells (hASCs) were differentiated into myogenic cells. •hASCs differentiated by applying MyoD-IT fused to myotubes through co-culturing with mouse myoblasts. •Myogenic differentiation using MyoD-IT is a safe method without the concern of altering the genome. -- Abstract: Human adipose-derived stem cells (hASCs) have great potential as cell sources for the treatment of muscle disorders. To provide a safe method for the myogenic differentiation of hASCs, we engineered the MyoD protein, a key transcription factor for myogenesis. The engineered MyoD (MyoD-IT) was designed to contain the TAT protein transduction domain for cell penetration and the membrane-disrupting INF7 peptide, which is an improved version of the HA2 peptide derived from influenza. MyoD-IT showed greatly improved nuclear targeting ability through an efficient endosomal escape induced by the pH-sensitive membrane disruption of the INF7 peptide. By applying MyoD-IT to a culture, hASCs were efficiently differentiated into long spindle-shaped myogenic cells expressing myosin heavy chains. Moreover, these cells differentiated by an application of MyoD-IT fused to myotubes with high efficiency through co-culturing with mouse C2C12 myoblasts. Because internalized proteins can be degraded in cells without altering the genome, the myogenic differentiation of hASCs using MyoD-IT would be a safe and clinically applicable method.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Xylose metabolic engineering of Issatchenkia orientalis for 3-hydroxypropionic acid production from cellulosic hydrolysate without nutrient supplementation

Bioconversion of lignocellulosic biomass offers a promising alternative to petroleum-based chemical production. However, inefficient xylose utilization and toxic compounds in cellulosic hydrolysate limit microbial fermentation, as the hydrolysate contains substantial amounts of xylose in addition to glucose. To address these challenges, we engineered Issatchenkia orientalis to produce 3-hydroxypropionic acid (3-HP) directly from sorghum hydrolysate under low-pH conditions. A heterologous xylose utilization pathway consisting of XYL1, XYL2, and XYL3 from Scheffersomyces stipitis was introduced into an engineered 3-HP producing strain, enabling efficient conversion of xylose to 3-HP. The engineered strain produced 46.8 g/L 3-HP from sorghum hydrolysate without nutrient supplementation. To eliminate the lag phase under low-pH conditions, fermentation was conducted at pH 6.0 for the first three days, after which pH control was discontinued and in situ 3-HP accumulation buffered the culture. This partial pH control strategy increased 3-HP productivity by 55% from 0.20 to 0.31 g/L∙h, while maintaining low-pH conditions. Introducing an additional copy of XYL2 further increased 3-HP titer to 53.5 g/L and the yield by 33%, from 0.30 to 0.40 g/g sugars, with pH reaching 4.5 at the end of fermentation. This represents one of the highest reported 3-HP titers and yields from cellulosic hydrolysate without additional nutrient supplementation. This work demonstrates a nutrient-independent and low-pH bioprocess for upgrading lignocellulosic hydrolysate into 3-HP, highlighting the industrial potential of engineered xylose-utilizing I. orientalis for sustainable production of platform chemicals from renewable feedstocks.

3-Hydroxypropionic acid↗
DOE OSTI2022

Applications of targeted proteomics in metabolic engineering: advances and opportunities

Optimization of metabolically engineered organisms requires good understanding of producing balanced level of pathway proteins. Targeted proteomics via selected-reaction monitoring (SRM) has been increasingly used in metabolic engineering studies to detect and quantify sets of proteins with high selectivity, multiplexity, and reproducibility. In combination with metabolomics and other omics tools, targeted proteomics has helped optimize the production of many bio-based chemicals in various metabolic engineering cell factories. In this review, we present recent applications of targeted proteomics in metabolic engineering studies and highlight several successful cases of targeted proteomics in boosting production of commodity and high value chemicals. Additionally, we also discuss challenges and limitations of current targeted proteomics and map opportunities for future research.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Gaseous fuels variation effects on first and second law analyses of a small direct injection engine for micro-CHP systems

This report examines the detailed energy and exergy distribution of a 34 cc (cc) air-cooled, two-stroke engine configured to operate on different natural gas (NG) compositions, pure methane, and propane. The engine was developed for application in a small, decentralized combined heat and power (CHP) system. It included optimized intake and exhaust resonators designed from Helmholtz resonance theory to promote effective scavenging. Operation occurred at wide-open-throttle (WOT) at an engine speed of 5400 revolutions per minute (RPM) with low-pressure direct injection (LPDI). Electronic ignition timing was adjusted for maximum brake torque (MBT) while the air-fuel ratio (AFR) was adjusted by injection duration, such that both rich and lean combustion were examined. In addition, start of injection (SOI) was adjusted to balance maximum fuel trapping and combustion stability. Full energy and exergy distribution analyses were completed, as engine operating regimes changed. Exergy was divided into work (available), lost (recoverable), and destructed availabilities. It was found that fuel loss and heat transfer contributed the most to exergy losses, accounting for around 15% and 9% of fuel exergy, respectively. Propane with the highest density, showed the highest in-cylinder trapped energy, heat transfer and, peak utilization factor (UF) of 85.3%. Due to fuel presence in the exhaust, lower 1st law efficiency did not necessarily result into a lower 2nd law efficiency. Higher mixture stratification with propane operation increased carbon monoxide (CO) emissions and hydrogen (H 2 ) content due to rich operation. CO oxidation could recover up to around 5% and 4% of injected fuel energy as heat for CHP system with propane and NG, respectively. Peak 2nd law efficiencies were around 60.5% while peak 1st law indicated efficiency was around 29%. This discrepancy was due to both exhaust hydrocarbon (HC from fuel slip and incomplete combustion) content, exhaust CO content, and heat loss availabilities.

03 NATURAL GAS↗