Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electric polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ferroelectrically switched valley-dependent transmission in SnTe-PbTe-SnTe monolayer lateral heterostructures

A special class of valleytronic two-dimensional (2D) semiconductors possesses carrier pockets (i.e., valleys) along certain directions in the first Brillouin zone, which can be applied as a new degree of freedom for information storage and processing. Here we show that members of this family that are ferroelectric allow the location of these valleys to be switched by rotating the ferroelectric polarization. This makes possible the control of electronic state transmission probability through an energy barrier by ferroelectrically switching the polarization direction, thereby creating or eliminating valley matching in reciprocal space. We apply molecular beam epitaxy to grow lateral sandwich heterostructures with monolayer-thick ferroelectric SnTe separated by nanometer-wide paraelectric PbTe as the barriers. Using scanning tunneling microscopy, we show that the transmission probability of the 2D hole states at the valence band maximum of SnTe monolayer strongly relies on the relative orientation between the polarization directions of the two SnTe electrodes. The transmission can be switched from a suppressed state to a permitted state by rotating the ferroelectric polarization of one SnTe electrode by 90 degrees. Our work demonstrates the electric-field-control of valley locations and its potential for tunnel junction valleytronic devices.

electronic devices↗
DOE OSTI2024

The motional Stark effect diagnostic for ITER

An overview of the plans for the motional Stark effect (MSE) diagnostic installation on the International Thermonuclear Experimental Reactor (ITER) is presented. The MSE diagnostic uniquely provides spatially localized magnetic field measurements inside the plasma. These are used to constrain equilibrium reconstructions to determine q(r), the safety factor as a function of minor radius. Meeting the system requirements to deliver q-profiles and related quantities with the specified radial resolution of 20 points over the minor radius, 10 ms time resolution, and better than 10% accuracy is challenging. MSE systems observe the D/H-α emission near 656.3 nm from neutral beams. As the beam atoms traverse the magnetic field, B⃗, at high velocity, v⃗, they experience a Lorentz electric field, v⃗×B⃗, which causes the spectral emission to be split and polarized due to the Stark effect. Traditional MSE-LP (line polarization) measurements determine the direction of the magnetic field in the observation volume using polarimetric analysis of the detected light. The harsh conditions of ITER are expected to deposit thin films of contaminants on the first mirror, which would alter the polarization state of reflected light significantly. On ITER, the combination of high magnetic field strength and high energy beams makes the Stark spectrum resolution suitable for the determination of the magnetic field magnitude from the line shift, so this approach has been selected. Every aspect of the measurement system must be planned for the burning plasma environment and carefully analyzed ahead of time. Current status and plans for the system are presented.

Instruments & Instrumentation↗
DOE OSTI2020

Decay of Electrostatic Force of Dust Particles on Photovoltaic Modules

Photovoltaic (PV) energy yield loss due to solar module soiling has become increasingly important as solar module deployment is now at the hundreds of gigawatts scale and continues to grow rapidly. We have reported on direct measurements-using atomic force microscopy (AFM)-of strong electric-field-induced attraction and adhesion force (Fes) of dust particles onto solar panel that are 1 to 2 orders of magnitude stronger than the van der Waals and water capillary forces, corroborated by observing the increase in system voltage-induced soiling rate. Here, we report another characteristic of Fes on soiling-long lasting or slow decay after turning off the high voltage applied to solar panels. The Fes decay time varies in a wide time range of 1 to 10 hours, depending on two factors: 1) either/both the cell or/and particle were charged with high voltage before the voltages were turned off; and 2) how the cell was connected to the ground after the voltage was turned off-either connected through the power supply electronics, directly connected to the ground, or electrically floated. The Fes decay is understood in terms of 1) net electrical charge dissipations in both particle and cell, 2) thermal disordering of dipole polarization in the module glass dielectrics, and 3) charge redistribution by the electrostatic interaction of particle and module glass. This long-lasting Fes for hours can significantly affect the solar panel soiling after sunset, especially combined with water condensation.

14 SOLAR ENERGY↗
NASA NTRS1976

Preliminary scaling laws for plasma current, ion kinetic temperature, and plasma number density in the NASA Lewis Bumpy Torus plasma

Parametric variation of independent variables which may affect the characteristics of the NASA Lewis Bumpy Torus plasma have identified those which have a significant effect on the plasma current, ion kinetic temperature, and plasma number density, and those which do not. Empirical power-law correlations of the plasma current, and the ion kinetic temperature and number density were obtained as functions of the potential applied to the midplane electrode rings, the background neutral gas pressure, and the magnetic field strength. Additional parameters studied include the type of gas, the polarity of the midplane electrode rings (and hence the direction of the radial electric field), the mode of plasma operation, and the method of measuring the plasma number density. No significant departures from the scaling laws appear to occur at the highest ion kinetic temperatures or number densities obtained to date.

Roth, J. R.↗
NASA NTRS1978

Radiation energy conversion in space; Conference, 3rd, NASA Ames Research Center, Moffett Field, Calif., January 26-28, 1978, Technical Papers

Concepts for space-based conversion of space radiation energy into useful energy for man's needs are developed and supported by studies of costs, material and size requirements, efficiency, and available technology. Besides the more studied solar power satellite system using microwave transmission, a number of alternative space energy concepts are considered. Topics covered include orbiting mirrors for terrestrial energy supply, energy conversion at a lunar polar site, ultralightweight structures for space power, radiatively sustained cesium plasmas for solar electric conversion, solar pumped CW CO2 laser, superelastic laser energy conversion, laser-enhanced dynamics in molecular rate processes, and electron beams in space for energy storage.

Billman, K. W.↗
NASA NTRS1983

Plasma Effects

Radio communication with space probes requires sending signals through the Earth's ionosphere and usually the solar wind. During planetary flybys, the signal may also pass through the ionosphere of another planet. These ionized media can perturb the radio signal in a variety of ways. Examples of these perturbations are variations in the electrical length between the spacecraft and the ground station, Faraday rotation of linearly polarized signals, amplitude and phase scintillations, and spectral and angular broadening. These plasma effects can have undesirable influences on telemetry performance and thus need to be understood from a communications engineering viewpoint. The plasma effects are, however, useful from a scientific viewpoint, since the effects on the communications link can often be inverted to estimate the physical conditions in the plasma.

Armstrong, J. W.↗
NASA NTRS1983

Apparent electrostatic ion cyclotron waves in the diffuse aurora

Emissions that have properties consistent with electrostatic ion cyclotron (EIC) waves have been observed at low altitude in the diffuse aurora by a sounding rocket payload. Peaks were observed in the power spectrum of the electric field near the hydrogen and oxygen ion cyclotron frequencies. Doppler shift and polarization analyses have been performed using EIC wave parameters derived from linear theory. Both analyses indicated that these emissions had properties consistent with those expected for H(+) and O(+) EIC waves. The two analyses indicated that both emission bands were due to waves propagating eastward parallel to the poleward boundary of the diffuse aurora. The large local cold plasma density and resulting Landau damping require that the source be local. Magnetometer data indicated the presence of a downward parallel current density of 5 microamps/sq m. Sufficient free energy for the waves was available from this current, although the waves were observed frequently at altitudes where the ion-neutral collision frequency exceeded the oxygen cyclotron frequency.

Bering, E. A.↗
NASA NTRS1989

Solutions of differential equations with regular coefficients by the methods of Richmond and Runge-Kutta

Numerical solutions of the differential equation which describe the electric field within an inhomogeneous layer of permittivity, upon which a perpendicularly-polarized plane wave is incident, are considered. Richmond's method and the Runge-Kutta method are compared for linear and exponential profiles of permittivities. These two approximate solutions are also compared with the exact solutions.

Cockrell, C. R.↗
NASA NTRS1990

Plasma structuring by the gradient drift instability at high latitudes and comparison with velocity shear driven processes

Using results of the in situ measurements made by the DE 2 satellite, the nature of plasma structuring at high latitudes, caused by the gradient drift instability process, is described. Using noon-midnight and dawn-dusk orbits of the DE 2 satellite, it was possible to examine the simultaneous density and electric field spectra of convecting large-scale plasma density enhancements in the polar cap known as 'patches', in directions parallel and perpendicular to their antisunward convection. The results provide evidence for the existence of at least two generic classes of instabilities operating in the high-latitude ionosphere: one driven by large-scale density gradients in a homogeneous convection field with respect to the neutrals, and the other driven by the structured convection field itself in an ambient ionosphere where density fluctuations are ubiquitous.

Basu, Sunanda↗
NASA NTRS1990

Observations of reconnected flux tubes within the midaltitude cusp

The paper presents three events interpreted as reconnected flux tubes that correspond to the extensions of FTEs which have penetrated deep into the magnetosphere down to the midaltitudes of the polar cusp. Low-energy plasma, high-energy plasma, magnetic fields, and electric fields are used to identify the signatures of reconnected flux tubes. Characteristics of spatial scale, time duration, and frequency of occurrence between flux transfer events and midaltitude cusp reconnected flux tubes are shown to be consistent, although they differ in the direction of motion. However, the merging cell topology and the interplanetary magnetic field effect can explain this difference. Larger-scale events can be explained by motion of the cusp resulting from a quasi-steady reconnection process. The field-aligned currents associated with reconnected flux tubes at midaltitudes within the cusp are shown to be consistent with twisting of magnetic field lines and with closure by Pedersen currents. It is considered possible that what appears to be field-aligned currents closing by Pedersen ionospheric currents may also be interpreted as currents carried by Alfven waves.

Saflekos, N. A.↗
NASA NTRS1991

THz dichroic plates for use at high angles of incidence

The design of a high frequency dichroic plate consisting of an electrically thick self supporting metallic mesh that can be used in a linearly polarized quasi-optical system at high angles of incidence is described. The measured and computed performance of a 2.5-inch aperture mesh is given. This mesh has a 3-dB cutoff frequency of 875 GHz and less than 0.75 dB of transmission loss from 950-1350 GHz at incidence angles of 0, 30, and 45 degrees. The results of a multimode waveguide analysis corroborate the measured data.

Siegel, Peter H.↗
NASA NTRS1992

Development of a stable electro-optical modulator

The activity of the sun can be studied through the measurement of its magnetic field. The measurement of the polarization state of the sunlight in a narrow spectral bandwidth can be related to the magnetic fields strengths and directions over the active sunspots. Measuring the polarization state can be done using the vector magnetograph. The essential component of the vector magnetograph is the polarization modulators. Electro-optical modulators are used as dynamic retarders. KDP (potassium dideuterium phosphate) crystals provide variable retardation which can be controlled by the applied voltage. KDP's have a high contrast ratio but suffer some problems; they require a high voltage and have a limited modulation lifetime. The KDP modulator forms the heart of the polarimeter assembly which is used for carrying out accurate measurements of linear polarization of the sun. It is therefore important to study the optical and electrical behavior of the KDP crystals so that the ultimate goal of making stable electro-optical modulators in the laboratory is achieved. A number of activities were performed in coating and testing the KDP crystals. A summary of these activities is given.

Abushagur, Mustafa A. G.↗
NASA NTRS1997

Exterior and Interior Polar Cusps: Observations from Hawkeye

Hawkeye plasma, magnetic field, and plasma wave instruments directly sampled the throat of the northern polar cusp as the orientation of the Interplanetary Magnetic Field (IMF) changed from southward to northward on July 3, 1974. Two distinct regions in the polar cusp were identified based on magnetic field, plasma flow and magnetic and electric noise: the interior and exterior cusps. The observations show highly variable flows in the exterior portion of the cusp and constantly strong dawn-dusk flows in the interior portion during periods of strong IMF By component. Results of a minimum variance analysis of the magnetic field at each cusp interface crossing provides evidence that the magnetopause surface normal deviated highly from empirical models. During intervals of relatively steady solar wind dynamic pressure, the motion of the cusp relative to the slow moving spacecraft was modulated by the varying IMF clock angle as observed by IMP 8 in the upstream solar wind. The motion did not show a correlation with internal processes monitored by the A E index. We propose that observed plasma flow patterns and cusp motion are results of reconnection between the IMF and the magnetospheric magnetic field. Flow velocity observed in the interior cusp is consistent with stress balance for a reconnection process. This unique interval provides an opportunity for detailed studies of the plasma, magnetic field, and plasma wave properties in both the exterior and interior cusp.

Chen, S.-H.↗
NASA NTRS2006

Round Trip Energy Efficiency of NASA Glenn Regenerative Fuel Cell System

NASA Glenn Research Center (GRC) has recently demonstrated a Polymer Electrolyte Membrane (PEM) based hydrogen/oxygen regenerative fuel cell system (RFCS) that operated for a charge/discharge cycle with round trip efficiency (RTE) greater than 50 percent. The regenerative fuel cell system (RFCS) demonstrated closed loop energy storage over a pressure range of 90 to 190 psig. In charge mode, a constant electrical power profile of 7.1 kWe was absorbed by the RFCS and stored as pressurized hydrogen and oxygen gas. In discharge mode, the system delivered 3 to 4 kWe of electrical power along with product water. Fuel cell and electrolyzer power profiles and polarization performance are documented in this paper. Individual cell performance and the variation of cell voltages within the electrochemical stacks are also reported. Fuel cell efficiency, electrolyzer efficiency, and the system RTE were calculated from the test data and are included below.

Garcia, Christopher P.↗
DOE OSTI2021

Direct measurement of ferroelectric polarization in a tunable semimetal

Abstract Ferroelectricity, the electrostatic counterpart to ferromagnetism, has long been thought to be incompatible with metallicity due to screening of electric dipoles and external electric fields by itinerant charges. Recent measurements, however, demonstrated signatures of ferroelectric switching in the electrical conductance of bilayers and trilayers of WTe 2 , a semimetallic transition metal dichalcogenide with broken inversion symmetry. An especially promising aspect of this system is that the density of electrons and holes can be continuously tuned by an external gate voltage. This degree of freedom enables measurement of the spontaneous polarization as free carriers are added to the system. Here we employ capacitive sensing in dual-gated mesoscopic devices of bilayer WTe 2 to directly measure the spontaneous polarization in the metallic state and quantify the effect of free carriers on the polarization in the conduction and valence bands, separately. We compare our results to a low-energy model for the electronic bands and identify the layer-polarized states that contribute to transport and polarization simultaneously. Bilayer WTe 2 is thus shown to be a fully tunable ferroelectric metal and an ideal platform for exploring polar ordering, ferroelectric transitions, and applications in the presence of free carriers.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Resonant Spectra of Malignant Breast Cancer Tumors Using the Three-Dimensional Electromagnetic Fast Multipole Model

An intensive numerical study for the resonance scattering of malignant breast cancer tumors is presented. The rigorous three-dimensional electromagnetic model, based on the equivalence theorem, is used to obtain the induced electric and magnetic currents on the breast and tumor surfaces. The results show that a non-spherical malignant tumor can be characterized based its spectra regardless of its orientation, the incident polarization, or the incident or scattered directions. The tumor's spectra depend solely on its physical characteristics (i.e., the shape and the electrical properties), however, their locations are not functions of its burial depth. This work provides a useful guidance to select the appropriate frequency range for the tumor's size.

El-Shenawee, Magda↗
NASA NTRS1983

Multifrequency synthetic aperture radar antenna comparison study

Three multifrequency, dual polarization SAR antenna designs are reviewed. The SAR antenna design specifications were for a "straw man' SAR which would approximate the requirements for projected shuttle-based SAR's. Therefore, the physical dimensions were constrained to be compatible with the space shuttle. The electrical specifications were similar to those of SIR-A and SIR-B with the addition of dual polarization and the addition of C and X band operation. Early in the antenna design considerations, three candidate technologies emerged as having promise. They were: (1) microstrip patch planar array antennas, (2) slotted waveguide planar array antennas, and (3) open-ended waveguide planar array antennas.

Blevins, B. A.↗
DOE OSTI2024

Electrical de-poling and re-poling of relaxor-PbTiO 3 piezoelectric single crystals without heat treatment

Re-poling of unexpected partially depoled piezoelectric materials conventionally needs to be first fully depoled through annealing above their Curie temperature to revive piezoelectric performances. Here, we investigated de-poling and re-poling of Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 single crystals under electric fields at room temperature. We found that alternating current electric fields with amplitudes near the coercive field at low frequencies (<10 Hz) can be employed to successfully depolarize poled crystals at room temperature. We also demonstrated a reversible polarization switching process with a relaxor-PbTiO 3 single crystal ultrasound transducer without device performance degradations. This experimental observation is supported by phase-field simulation, showing that alternating current electric fields can readily induce de-poling at room temperature, while direct current electric fields induce a transient depoled state only within an uncontrollable short period of time. The findings suggest new strategies for unprecedented in-device tailoring of the polarization states of ferroelectric materials.

36 MATERIALS SCIENCE↗