Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPECTATION VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Measurements of the branching fractions B ( B ¯ 0 → D * + π - ) and B ( B ¯ 0 → D * + K - ) and tests of QCD factorization

Using (771.6 ± 10.6) × 10 6 $B\overline{B}$ meson pairs recorded by the Belle experiment at the KEKB e + e - collider, we report the branching fractions $\mathscr{B}$($\overline{B}$ 0 → D* + π - ) = (2.62 ± 0.02 ± 0.09 X 10 -3 and $\mathscr{B}$($\overline{B}$ 0 → D* + K - ) = (2.22 ± 0.06 ± 0.08) × 10 -4 ; the quoted uncertainties are statistical and systematic, respectively. A measurement of the ratio of these branching fractions is also presented, R K/π = $\mathscr{B}$($\overline{B}$ → D* + K - )/ $\mathscr{B}$($\overline{B}$ → D* + π - ) = (8.41 ± 0.24 ± 0.13) × 10 -2 , where systematic uncertainties due to the D* + meson reconstruction cancel out. Furthermore, we report a new QCD factorization test based on the measured ratios for $\overline{B}$ → D* + h - and $\overline{B}$ → D* + ℓ - $v$ decays at squared momentum transfer values equivalent to the mass of the h = π or K hadron. The parameters |a 1 (h)| are measured to be |a 1 (π)| = 0.884 ± 0.004 ± 0.003 ± 0.016 and |a 1 (K)| = 0.913 ± 0.019 ± 0.008 ± 0.013, where the last uncertainties account for all external inputs. These values are approximately 15% lower than those expected from theoretical predictions. Subsequently, flavor SU(3) symmetry is tested by measuring the ratios for pions and kaons, |a 1 (K)| 2 /|a 1 (π) 2 | = 1.066 ± 0.042 ± 0.018 ± 0.023, as well as for different particle species. The ratio is consistent with unity and therefore no evidence for SU(3) symmetry breaking effects is found at the 5% precision level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Notification of Operational Scope Change for the FTWC Venting Project at Los Alamos National Laboratory (LANL)

This letter is intended to provide you an update on the scope of work for the venting of the Flanged Tritium Waste Containers (FTWCs) at Los Alamos National Laboratory (LANL) Technical Area (TA-) 54. This project was described in the Application for Pre-Construction Approval 1 ("the Application") that was approved by EPA Region 6 on May 22, 2019. As operational planning for this project has been finalized, the scope of work described in the Application has slightly changed. The project has now determined that each FTWC may be vented multiple times, and these venting activities may take place at more than one location. The original application only discussed a single venting operation for each FTWC at a single location, TA-54. However, the radionuclide inventory and expected air releases remain bounded by the values described in the Application.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Property Measurements of LiF-NaF-KF Molten Salts Doped with Corrosion Products and Oxygen

Measurements of thermophysical properties of molten salts are needed for modeling and simulation activities that support the development of molten salt reactor (MSR) technologies. Properties of interest including transition temperatures, phase behavior, heat capacity, density, volumetric thermal expansion, surface tension, viscosity, thermal diffusivity, thermal conductivity, and vapor pressure are being performed at Argonne. Results of these property measurements are suitable for use in evaluating reactor performance during startup and the early operating life of the reactor. Ingressions of oxygen and moisture into the fuel salt are expected to occur at different times during the operating life of the reactor due to system leaks, maintenance, and refueling activities. The presence of these environmental contaminants induces corrosion of structural materials. The introduction of corrosion-derived species, oxygen and moisture is expected to affect the physical and chemical properties of the salt and operation of the reactor. Previous work performed at Argonne evaluated the effects of fission product dopants on the thermal properties of eutectic LiF-NaF-KF (FLiNaK). Properties of FLiNaK are commonly used to represent those of fluoride-bearing fuel salts. Metallic corrosion products such as chromium and nickel ions together with dissolved oxygen are expected to affect system redox differently than the accumulation of fission products. Work summarized in this report was performed to measure the effects of corrosion products and dissolved oxygen on the phase transitions, and specific heat capacity of FLiNaK. Thermophysical property measurements were made using four salts that were prepared by doping aliquots of a eutectic mixture of FLiNaK with surrogate corrosion products. Controlled additions of CrF 3 and NiF 2 were used as surrogates for corrosion product contamination anticipated during extended reactor operations in which fuel salt is in contact with steel reactor components. Controlled additions of UF 4 from two sources containing known amounts of UO 2 at different concentrations were used to represent oxygen contamination. The phase transitions and specific heat capacities of the four salts were measured by using differential scanning calorimetry. Measurements were made at temperatures spanning the range of 500−900 °C, which is the expected operating range of MSRs. Measured property values were compared to values measured previously with eutectic FLiNaK without dopants. Differences between property values measured for the doped and non-doped salts were compared with the uncertainties of the measurements to determine the significance of the effect of corrosion products and oxygen on salt properties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1972

Apollo experience report: Lunar module environmental control subsystem

A functional description of the environmental control subsystem is presented. Development, tests, checkout, and flight experiences of the subsystem are discussed; and the design fabrication, and operational difficulties associated with the various components and subassemblies are recorded. Detailed information is related concerning design changes made to, and problems encountered with, the various elements of the subsystem, such as the thermal control water sublimator, the carbon dioxide sensing and control units, and the water section. The problems associated with water sterilization, water/glycol formulation, and materials compatibility are discussed. The corrective actions taken are described with the expection that this information may be of value for future subsystems. Although the main experiences described are problem oriented, the subsystem has generally performed satisfactorily in flight.

Gillen, R. J.↗
NASA NTRS1976

Determination of statistics for any rotation of axes of a bivariate normal elliptical distribution

Transformation of statistics from a dimensional set to another dimensional set involves linear functions of the original set of statistics. Similarly, linear functions will transform statistics within a dimensional set such that the new statistics are relevant to a new set of coordinate axes. A restricted case of the latter is the rotation of axes in a coordinate system involving any two correlated random variables. A special case is the transformation for horizontal wind distributions. Wind statistics are usually provided in terms of wind speed and direction (measured clockwise from north) or in east-west and north-south components. A direct application of this technique allows the determination of appropriate wind statistics parallel and normal to any preselected flight path of a space vehicle. Among the constraints for launching space vehicles are critical values selected from the distribution of the expected winds parallel to and normal to the flight path. These procedures are applied to space vehicle launches at Cape Kennedy, Florida.

Falls, L. W.↗
NASA NTRS1983

Corequake and shock heating model of the 5 March 1979 gamma-ray burst

Ramaty et al. (1980) have proposed a model of a neutron-star corequake and subsequent shock heating of the atmosphere to account for the gamma-ray burst of March 5, 1979. This model is elaborated by examining the overall energetics and characteristics of the radiation-dominated gas shocks under the assumption of thermodynamic equilibrium, taking into account the electron-positron pair production behind the shock. Using values for the density typical of those expected for neutron-star crusts (100-10,000 g/cu cm) and shock velocities characteristic of the sound speed (40,000-100,000), shock luminosities are obtained comparable to those required if the burst originated in the LMC. In addition, the fraction of energy deposited in electron-positron pairs is in good agreement with observation. Uneven shock heating between the polar and equatorial regions of the neutron star due to the presence of a dipole magnetic field, coupled with a rotation rate of 8 s, can also naturally account for the pulsating phase of the burst.

Ellison, D. C.↗
NASA NTRS1985

The apsidal motion of the eccentric eclipsing binary DI Herculis - An apparent discrepancy with general relativity

The apsidal motion of the eccentric eclipsing binary DI Herculis (HD 175227) is determined from an analysis of the available observations and eclipse timings from 1959 to 1984. Least squares solutions to the primary and secondary minima extending over an 84-yr interval yielded a small advance of periastron omega dot of 0.65 deg/100 yr + or - 0.18/100 yr. The observed advance of the periastron is about one seventh of the theoretical value of 4.27 deg/100 yr that is expected from the combined relativistic and classical effects. The discrepancy is about -3.62 deg/100 yr, or a magnitude of about 20 sigma. Classical mechanisms which explain the discrepancy are discussed, together with the possibility that there may be problems with general relativity itself.

Guinan, E. F.↗
NASA NTRS1988

On the torque and wear behavior of selected thin film MOS2 lubricated gimbal bearings

During the thermal vacuum test phase of the GOES 7 spacecraft, the primary scan mirror system exhibited unacceptably high drive friction. The observed friction was found to correlate with small misalignments in the mirror structure and unavoidable loads induced by the vehicle spin. An intensive effort to understand and document the performance of the scan mirror bearing system under these loads is described. This effort involved calculation of the bearing loads and expected friction torque, comparison of the computed values to test data, and verification of the lubrication system performance and limitations under external loads. The study culminated in a successful system launch in February of 1987. The system has operated as predicted since that time.

Bohner, John J.↗
NASA NTRS1987

Numerical simulations of turbulent trapping in the weak beam-plasma instability

Numerical simulations of the weak beam-plasma instability were done in the turbulent regime where small-scale trapping is a dominant feature of the instability, a regime with behavior not predicted by quasi-linear theory. The results of the simulations were compared with those of a specific model of the turbulence, the so-called 'turbulent trapping' model, which gives precise formulas for the particle correlation functions, and predicts a growth rate well enhanced over the quasi-linear value. It was found that the model gives accurate predictions for the correlation functions. On the other hand, while growth rates were enhanced over the quasi-linear values, the enhancements observed are smaller than expected from the quantitative predictions of the model.

Theilhaber, K.↗
NASA NTRS1988

Expansion tube test time predictions

The interaction of an interface between two gases and strong expansion is investigated and the effect on flow in an expansion tube is examined. Two mechanisms for the unsteady Pitot-pressure fluctuations found in the test section of an expansion tube are proposed. The first mechanism depends on the Rayleigh-Taylor instability of the driver-test gas interface in the presence of a strong expansion. The second mechanism depends on the reflection of the strong expansion from the interface. Predictions compare favorably with experimental results. The theory is expected to be independent of the absolute values of the initial expansion tube filling pressures.

Gourlay, Christopher M.↗
NASA NTRS1990

Testing for lightning as a source of radio bursts observed on the nightside of Venus

In certain previous studies of radio burst events recorded by the Pioneer Venus Orbiting Electric Field Detector (OEFD), data were sorted for statistical purposes according to occurrence at filter band frequencies smaller than or greater than typical values of the ambient electron gyrofrequency. The expectation in making this distinction was that the lowest frequency signals, at 100 Hz, were candidates for propagation through the ionosphere to the spacecraft in the whistler mode, and that the higher frequency signals, if of subionospheric origin, would require some different ionospheric penetration mechanism. On the basis of certain assumptions about the homogeneity and horizontal stratification of the Venusian nightside ionosphere, methods were developed for case-by-case testing of the hypothesis that any particular burst event originated in subionospheric lightning. The tests, which are capable of refinement, allow prediction of the resonance cone angle, refractive index, wave dispersion, and wave polarization. The tests have been applied to data from 11 periods along 7 orbits, and are believed to represent an improved way of categorizing OEFD burst data for purposes of investigating source/propagation mechanisms. Four of the five burst events that were not found consistent with the lightning hypothesis involved receptions at multiple OEFD filter band frequencies.

Sonwalkar, Vikas S.↗
NASA NTRS1994

Fabric geometry distortion during composites processing

Waviness and tow misalignment are often cited as possible causes of data scatter and lower compression stiffness and strength in textile composites. Strength differences of as much as 40 percent have been seen in composites that appear to have the same basic material and structural properties -- i.e., yarn orientation, yarn size, interlacing geometry. Fabric geometry distortion has been suggested as a possible reason for this discrepancy, but little quantitative data or substantial evidence exists. The focus of this research is to contribute to the present understanding of the causes and effects of geometric distortion in textile composites. The initial part of the study was an attempt to gather qualitative information on a variety of textile structures. Existing and new samples confirmed that structures with a significant direction presence would be more susceptible to distortion due to the compaction process. Thus, uniweaves (fiber vol frac: 54-72 percent) biaxial braids (vf: 34-58 percent) demonstrated very little fabric geometry distortion. In stitched panels, only slight buckling of z-direction stitches was observed, primarily near the surface. In contrast, for structures with high compaction ratios -- e.g., large cylindrical yarns (2.5:1) orpowder towpreg (4:1) -- there were visible distortions where previously smooth and periodic undulations were transformed to abrupt changes in direction. A controlled study of the effect of forming pressure on distortion was conducted on type 162 glass plain weave fabrics. Panels (6 x 6 in) were produced via a resin infusion type setup, but with an EPON 815 epoxy resin. Pressures ranging from hand layup to 200 psi were used (vf: 34-54 percent). Photomicrographs indicated that at pressures up to 50 psi, large changes in thickness were due primarily to resin squeeze out. At higher pressures, when intimate contact was made between the layers, there was some tow flattening and in-plane shifting to optimize nesting. However, even at 200 psi the period and amplitude of the tow undulation remained constant, suggesting that for this relatively fine fabric, distortions from compaction were not a problem. Because of the interest in using larger tows (to reduce cost) and more complex structures, tests were also run on 2D triaxial glass braid (113 yd/lb at 0, 225 yd/lb at +/- 45). Forming pressures of 20, 50, 200, and 500 psi were used, and short block compression tests were run. The 500 psi specimen had a 10 percent decrease in modulus and an almost 50 percent decrease in strength (vs. 20 psi). Because the total fiber wgt/panel was kept constant, the thickness varied from 0.32 to 0.22 in (49-70 percent vf). Yet, the strength value is clearly below what would be expected, even with the decrease in thickness. Photomicrographs of these samples will be taken to determine if more fabric distortion exists in the 500 psi specimens. Finally, because the ultimate goal is to be able to predict and control distortion in a variety of textile structures, a model compaction test was developed to directly measure the deformation of the tows during compaction. Layers of dry glass fabric were placed in a mold with a clear plexiglass window. The yarn amplitude and period was then calculated using image analysis of the videotaped deformation. Preliminary tests demonstrated the feasibility of this technique for simple fabrics with large tows.

Chen, Julie↗
NASA NTRS1995

Extinction coefficient (1 micrometer) properties of high-altitude clouds from solar occultation measurements (1985-1990): Evidence of volcanic aerosol effect

The properties of the 1-micrometer volume extinction coefficient of two geographically different high-altitude cloud systems have been examined for the posteruption period (1985-1990) of the April 1982 El Chichon volcanic event with emphasis on the effect of volcanic aerosols on clouds. These two high-altitude cloud systems are the tropical clouds in the tropopause region observed by the Stratospheric Aerosol and Gas Experiment (SAGE) 2 and the polar stratospheric clouds (PSCs) sighted by the Stratospheric Aerosol Measurement (SAM) 2. The results indicate that volcanic aerosols alter the frequency distributions of these high-altitude clouds in such a manner that the occurrence of clouds having high extinction coefficients (6 x 10(exp -3) - 2 x 10(exp -2)/km) is suppressed, while that of clouds having low extinction coefficients (2 x 10(exp -3) - 6 x 10(exp -2)/km) is enhanced. This influence of the volcanic aerosols appears to be opposite to the increase in the extinction coefficient of optically thick clouds observed by the Earth Radiation Budget Experiment (ERBE) during the initial posteruption period of the June 1991 Pinatubo eruption. A plausible explanation of this difference, based on the Mie theory, is presented. As a consequence of the Mie theory, the effective radius of most, if not all, of the high-altitude clouds, measured by the SAGE series of satellite instruments must be less than about 0.8 micrometers. This mean cloud particle size implied by the satellite extinction-coefficient data at a single wavelength (1 micrometer) is further substantiated by the particle size analysis based on cloud extinction coefficient at two wavelengths (0.525 and 1.02 micrometers) obtained by the SAGE 2 observations. Most of the radiation measured by ERBE is reflected by cloud systems comprised of particles having effective radii much greater than 1 micrometer. A reduction in the effective radius of these clouds due to volcanic aerosols is expected to increase their extinction-coefficient values, opposite the effect observed by SAGE 2 and SAM 2. This work further illustrates the capability of the solar occultation satellite sensor to provide particulate extinction-coefficient measurements important to the study of the aerosol-cloud interactions. It is important to examine the variations of the extinction coefficient of these two high-altitude cloud systems for the posteruption years of the Pinatubo volcanic event for further evidence of the impact of volcanic aerosols on high-altitude clouds.

Wang, Pi-Huan↗
NASA NTRS1966

Problems Arising from Current Trends in Propulsion System Design and Guidance Schemes

Mission requirements in various NASA programs dictate the necessity for high reliability, continual and chronic increases in payload capability, and precise injection into the prescribed orbit. In some vehicles, concepts employed to meet these criteria in the areas of guidance and propulsion have been found to be somewhat in conflict. For the express purpose of increasing reliability, the primary emphasis in engine and feed design has been placed on simplification including the removal of control systems. In the guidance area considerable attention has been given to the development of methods of implementation which allow complete reshaping of the pitch program if the stage should perform at some level other than predicted. In such a guidance scheme the assumption is made that observed differences in performance levels are constant throughout flight. In the absence of propulsion control systems, however, some oscillations about a mean value representative of the shift can be expected. Analyses showed that this occurrence would severely limit the effectiveness of the Iterative Guidance Mode. The purpose of this paper is to deal with the definition, causes and cures of this problem.

McKay, George H., Jr.↗
NASA NTRS1998

Advanced far infrared blocked impurity band detectors based on germanium liquid phase epitaxy

This research has shown that epilayers with residual impurity concentrations of 5 x 10(sup 13) cm(exp -3) can be grown by producing the purest Pb available in the world. These epilayers have extremely low minority acceptor concentrations, which is ideal for fabrication of IR absorbing layers. The Pb LPE growth of Ge also has the advantageous property of gettering Cu from the epilayer and the substrate. Epilayers have been grown with intentional Sb doping for IR absorption on lightly doped substrates. This research has proven that properly working Ge BIB detectors can be fabricated from the liquid phase as long as pure enough solvents are available. The detectors have responded at reach minimum wavenumbers. Optimization of the Sb doping concentration should further decrease the photoionization energy of these detectors. Ge BIB detectors have been fabricated that respond to 60 cm(exp -1) with low responsivity. Through reduction of the minority residual impurities, detector performance has reached responsivities of 1 A/W. These detectors have exhibited quantum efficiency and NEP values that rival conventional photoconductors and are expected to provide a much more sensitive tool for new scientific discoveries in a number of fields, including solid state studies, astronomy, and cosmology.

Olsen, C. S.↗
NASA NTRS2001

ESTAR Measurements During the Southern Great Plains Experiment (SGP99)

During the Southern Great Plains experiment, the synthetic aperture radiometer, ESTAR, mapped L-band brightness temperature over a swath about 50 km wide and about 300 km long extending west from Oklahoma City to El Reno and north from the Little Washita River watershed to the Kansas border. ESTAR flew on the NASA P-3B Orion aircraft at an altitude of 7.6 km and maps were made on 7 days between July 8-20, 1999. The brightness temperature maps reflect the patterns of soil moisture expected from rainfall and are consistent with values of soil moisture observed at the research sites within the SGP99 study area and with previous measurements in this area. The data add to the resources for hydrologic modeling in this area and are further validation of the technology represented by ESTAR as a potential path to a future mission to map soil moisture globally from space.

LeVine, D. M.↗
NASA NTRS2003

Long-Range Solar Activity Predictions: A Reprieve from Cycle #24's Activity

We discuss the field of long-range solar activity predictions and provide an outlook into future solar activity. Orbital predictions for satellites in Low Earth Orbit (LEO) depend strongly on exospheric densities. Solar activity forecasting is important in this regard, as the solar ultra-violet (UV) and extreme ultraviolet (EUV) radiations inflate the upper atmospheric layers of the Earth, forming the exosphere in which satellites orbit. Rather than concentrate on statistical, or numerical methods, we utilize a class of techniques (precursor methods) which is founded in physical theory. The geomagnetic precursor method was originally developed by the Russian geophysicist, Ohl, using geomagnetic observations to predict future solar activity. It was later extended to solar observations, and placed within the context of physical theory, namely the workings of the Sun s Babcock dynamo. We later expanded the prediction methods with a SOlar Dynamo Amplitude (SODA) index. The SODA index is a measure of the buried solar magnetic flux, using toroidal and poloidal field components. It allows one to predict future solar activity during any phase of the solar cycle, whereas previously, one was restricted to making predictions only at solar minimum. We are encouraged that solar cycle #23's behavior fell closely along our predicted curve, peaking near 192, comparable to the Schatten, Myers and Sofia (1996) forecast of 182+/-30. Cycle #23 extends from 1996 through approximately 2006 or 2007, with cycle #24 starting thereafter. We discuss the current forecast of solar cycle #24, (2006-2016), with a predicted smoothed F10.7 radio flux of 142+/-28 (1-sigma errors). This, we believe, represents a reprieve, in terms of reduced fuel costs, etc., for new satellites to be launched or old satellites (requiring reboosting) which have been placed in LEO. By monitoring the Sun s most deeply rooted magnetic fields; long-range solar activity can be predicted. Although a degree of uncertainty in the long-range predictions remains, requiring future monitoring, we do not expect the next cycle's + 2-sigma value will rise significantly above solar cycle #23's activity level.

Richon, K.↗
NASA NTRS2012

A New Method to Constrain Supernova Fractions Using X-ray Observations of Clusters of Galaxies

Supernova (SN) explosions enrich the intracluster medium (ICM) both by creating and dispersing metals. We introduce a method to measure the number of SNe and relative contribution of Type Ia supernovae (SNe Ia) and core-collapse supernovae (SNe cc) by directly fitting X-ray spectral observations. The method has been implemented as an XSPEC model called snapec. snapec utilizes a single-temperature thermal plasma code (apec) to model the spectral emission based on metal abundances calculated using the latest SN yields from SN Ia and SN cc explosion models. This approach provides a self-consistent single set of uncertainties on the total number of SN explosions and relative fraction of SN types in the ICM over the cluster lifetime by directly allowing these parameters to be determined by SN yields provided by simulations. We apply our approach to XMM-Newton European Photon Imaging Camera (EPIC), Reflection Grating Spectrometer (RGS), and 200 ks simulated Astro-H observations of a cooling flow cluster, A3112.We find that various sets of SN yields present in the literature produce an acceptable fit to the EPIC and RGS spectra of A3112. We infer that 30.3% plus or minus 5.4% to 37.1% plus or minus 7.1% of the total SN explosions are SNe Ia, and the total number of SN explosions required to create the observed metals is in the range of (1.06 plus or minus 0.34) x 10(exp 9), to (1.28 plus or minus 0.43) x 10(exp 9), fromsnapec fits to RGS spectra. These values may be compared to the enrichment expected based on well-established empirically measured SN rates per star formed. The proportions of SNe Ia and SNe cc inferred to have enriched the ICM in the inner 52 kiloparsecs of A3112 is consistent with these specific rates, if one applies a correction for the metals locked up in stars. At the same time, the inferred level of SN enrichment corresponds to a star-to-gas mass ratio that is several times greater than the 10% estimated globally for clusters in the A3112 mass range.

Observations↗